Author

Topic: Claymore's CryptoNote AMD GPU Miner v11.3 - page 133. (Read 2145056 times)

legendary
Activity: 1191
Merit: 1001
February 11, 2017, 05:44:13 PM
Hey guys

What miner should I use? Is minergate any good? Is it slower? Are fees higher ? I have no idea what is the difference. Help is much appreciated
For 2 gb cards claymore's, for 4gb and more better sgminer-gm.
sr. member
Activity: 362
Merit: 258
February 11, 2017, 05:36:53 PM
Hey guys

What miner should I use? Is minergate any good? Is it slower? Are fees higher ? I have no idea what is the difference. Help is much appreciated
sr. member
Activity: 445
Merit: 255
February 10, 2017, 05:32:06 PM
[R9 FURY speeds]

about 400H/s from sinlge grphic card, is it normal? Quite insanse. Double lower than polaris.

Yeah I get less than 500 with my fury on claymore.  use another xmr miner, you'll get around 800.  But its mining Zec anyway.  I havent played with it for xmr, but i'm quite positive it can do more.  I wonder if w0lf has a fury.  There are private miners out there too.
I got 880h/s with a fury-x gpu@1125mhz with claymore 9.6. Try with -h 1024. Driver between 15.12 and 16.11
sr. member
Activity: 312
Merit: 250
February 10, 2017, 02:14:24 PM
how did you get this ? I can do more with 2 rx 470?




I am currently running 2 x R9 Fury Trixx & on Claymore  Grin

-a 2 mode (low power mode) @ default clocks / no mods each do about ~816 h/s

1632 h/s total, pulling 274 Watts @ the wall. (Mother board pulls ~42w, So each fury is pulling little less than 120watts @ the wall.)

I also run a Fury X on my gaming machine, even with the extra shaders doesn't seem to increase the hash rate.. (but more power consumption)
newbie
Activity: 1
Merit: 0
February 10, 2017, 11:39:34 AM
 
I am currently running 2 x R9 Fury Trixx & on Claymore  Grin

-a 2 mode (low power mode) @ default clocks / no mods each do about ~816 h/s

1632 h/s total, pulling 274 Watts @ the wall. (Mother board pulls ~42w, So each fury is pulling little less than 120watts @ the wall.)

I also run a Fury X on my gaming machine, even with the extra shaders doesn't seem to increase the hash rate.. (but more power consumption)
sr. member
Activity: 312
Merit: 250
February 10, 2017, 11:15:13 AM
My memory is samsung 8GB DDR3 1600

Core Clocl - 1216
GPU clock - 1750
Voltage are default


You need to be more specific here:
How did you modify your BIOS, what memory is on your GPU (Hynix/Elpida/Samsung)?
What are your other settings aside of mem clock (core clock, core voltage, mem voltage) ?
My rig is running at an average of 725 H/s/card (lowest card ~690H/s, fastest ~760H/s) so i can't help you much if your target is to increase the hashrate to 900 H/s :p

full member
Activity: 299
Merit: 100
Crypto mining company | Mining pools
February 09, 2017, 10:34:52 AM
nice !  Care to share some juicy numbers for the fury ?  Would be fun to know what you can get out of them.

I honestly haven't tried that hard due to their power use. Might be fun later, though.

I also wonder what can you get out from them.
legendary
Activity: 2294
Merit: 1182
Now the money is free, and so the people will be
February 09, 2017, 10:27:17 AM
nice !  Care to share some juicy numbers for the fury ?  Would be fun to know what you can get out of them.
legendary
Activity: 2294
Merit: 1182
Now the money is free, and so the people will be
February 09, 2017, 08:44:05 AM
[R9 FURY speeds]

about 400H/s from sinlge grphic card, is it normal? Quite insanse. Double lower than polaris.

Yeah I get less than 500 with my fury on claymore.  use another xmr miner, you'll get around 800.  But its mining Zec anyway.  I havent played with it for xmr, but i'm quite positive it can do more.  I wonder if w0lf has a fury.  There are private miners out there too.
full member
Activity: 299
Merit: 100
Crypto mining company | Mining pools
February 09, 2017, 05:46:58 AM
[R9 FURY speeds]

about 400H/s from sinlge grphic card, is it normal? Quite insanse. Double lower than polaris.
full member
Activity: 185
Merit: 100
February 08, 2017, 10:20:28 PM
Dear Cubirez


I modified the bios of my Saphire RX470, but I could not put the memory clock to more than 1900.
If I put it above the pc hangs.
And the most I got was 670

How is it possible to do 900 h / s?

Thanks
Almir Fiorio


Read carefuly, he said a few post above that most of the shares were stales, making his 1100H/s not effective at all.

You can increase your hashrate a bit by overclocking the memory and modifying your bios.
Simple copy of your 1500 mem strap on the 1625/1750/2000 mem straps should increase your hashrate a bit.
If you want a bigger increase of your hashrate (up to 900 as xneoenx pointed out), you need custom mem strap which are much more complicated to figure out. As far as i know, these aren't being shared for free atm.

You need to be more specific here:
How did you modify your BIOS, what memory is on your GPU (Hynix/Elpida/Samsung)?
What are your other settings aside of mem clock (core clock, core voltage, mem voltage) ?
My rig is running at an average of 725 H/s/card (lowest card ~690H/s, fastest ~760H/s) so i can't help you much if your target is to increase the hashrate to 900 H/s :p
legendary
Activity: 1281
Merit: 1003
February 08, 2017, 05:39:39 PM
Dear Cubirez


I modified the bios of my Saphire RX470, but I could not put the memory clock to more than 1900.
If I put it above the pc hangs.
And the most I got was 670

How is it possible to do 900 h / s?

Thanks
Almir Fiorio


1375 timing bios @ 1920 memory for 767mh
sr. member
Activity: 312
Merit: 250
February 08, 2017, 11:38:57 AM
Dear Cubirez


I modified the bios of my Saphire RX470, but I could not put the memory clock to more than 1900.
If I put it above the pc hangs.
And the most I got was 670

How is it possible to do 900 h / s?

Thanks
Almir Fiorio


Read carefuly, he said a few post above that most of the shares were stales, making his 1100H/s not effective at all.

You can increase your hashrate a bit by overclocking the memory and modifying your bios.
Simple copy of your 1500 mem strap on the 1625/1750/2000 mem straps should increase your hashrate a bit.
If you want a bigger increase of your hashrate (up to 900 as xneoenx pointed out), you need custom mem strap which are much more complicated to figure out. As far as i know, these aren't being shared for free atm.
member
Activity: 84
Merit: 10
February 08, 2017, 12:45:56 AM
New 0.5 Wolf Miner? Hehehehe.

My program to mod it is really, really simple - run it, it displays current value and increments by one. Then just run it until you're at the desired value.

Mate, lol, are you going to release / implement this feature with your miner or will it be a private release? Also I dont have any programming skills, so I wouldnt know where to start to look / identify.
member
Activity: 84
Merit: 10
February 07, 2017, 07:43:21 PM
To break 900H/s stably, you may need more than timings. tREF I can't find ANYWHERE in the VBIOS, so I wrote a program for linux to modify it at runtime.

New 0.5 Wolf Miner? Hehehehe.
newbie
Activity: 10
Merit: 0
February 07, 2017, 12:59:46 PM
My current hashrate is approximately 2.6kh total using claymore
Based on calculator, i should be getting 0.293 XMR per day
But in my minergate account theres only 0.198

Factor in the consideration of Dev fee 2.5% + pool fee 1%
there is a deviation of approximate 40%...
Can anyone shed a light on this?

I'm curious about this as well. With 11 cards going, whattomine tells me I should be getting ~.76, and last night I got .73. I'll math this out and see if this might be correct. I'm honestly just a bit away, but so close that I'm not really bothered.



Bro your deviation is less than 2%. Factoring PPLNS that sometimes will get around up to  30% more or less (as explained by several pool)
My scenario is much worse.
Since I merged mining with XDN also, I'm supposed to get 240 XDN per day
Instead.. I have only 130 per day
member
Activity: 84
Merit: 10
February 07, 2017, 10:03:47 AM
My current hashrate is approximately 2.6kh total using claymore
Based on calculator, i should be getting 0.293 XMR per day
But in my minergate account theres only 0.198

Factor in the consideration of Dev fee 2.5% + pool fee 1%
there is a deviation of approximate 40%...
Can anyone shed a light on this?

I'm curious about this as well. With 11 cards going, whattomine tells me I should be getting ~.76, and last night I got .73. I'll math this out and see if this might be correct. I'm honestly just a bit away, but so close that I'm not really bothered.

sr. member
Activity: 417
Merit: 252
February 07, 2017, 08:35:42 AM
My current hashrate is approximately 2.6kh total using claymore
Based on calculator, i should be getting 0.293 XMR per day
But in my minergate account theres only 0.198

Factor in the consideration of Dev fee 2.5% + pool fee 1%
there is a deviation of approximate 40%...
Can anyone shed a light on this?

Are you sure the video cards didn't stop mining at some point or maybe it was just a bad day for the pool? I've checked if Minergate gives me as much as it says by comparing what I mined in a number of hours with the estimate they give. For me it looks like they are pretty fair.
newbie
Activity: 10
Merit: 0
February 07, 2017, 08:35:20 AM
Dear Claymore,
Can you have a look on this?

First initialization i always logged in as "[email protected]" Not my account definitely, see the line at 21:26:29:772   

21:26:13:536   1c08   
21:26:13:567   1c08   ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
21:26:13:583   1c08   º            Claymore CryptoNote GPU Miner  v9.7 Beta            º
21:26:13:583   1c08   ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
21:26:13:801   1c08   XMR: 1 pool is specified
21:26:13:801   1c08   Main pool is fcn-xmr.pool.minergate.com:45590
21:26:14:411   1c08   
Cards available: 2
21:26:14:411   1c08   GPU #0: name: Ellesmere, 8192 MB available, 32 units
21:26:14:426   1c08   GPU #1: name: Ellesmere, 8192 MB available, 32 units
21:26:14:426   1c08   Total cards: 2
21:26:14:426   1c08   Initializing...

21:26:14:442   1c08   GPU #0 recognized as RX470
21:26:14:442   1c08   card 0, m1 8192, m2 4048 w 256
21:26:14:458   1c08   0 m = 2
21:26:14:458   1c08   GPU #0: HashCnt = 1024
21:26:14:473   1c08   GPU #1 recognized as RX470
21:26:14:473   1c08   card 1, m1 8192, m2 4048 w 256
21:26:14:473   1c08   1 m = 2
21:26:14:489   1c08   GPU #1: HashCnt = 1024
21:26:14:489   1c08   POOL version
21:26:14:504   1c08   b155
21:26:20:254   1c08   GPU #0: -a 1 mode selected
21:26:20:270   1c08   GPU #1: -a 1 mode selected
21:26:29:444   1c08   1 pool specified.
21:26:29:444   1c08   Remote management (READ-ONLY MODE) is enabled on port 3333
21:26:29:538   1648   Stratum - connecting to 'fcn-xmr.pool.minergate.com' <176.9.47.243> port 45590 (unsecure)
21:26:29:772   110   send: {"method": "login", "params": {"login": "[email protected]", "pass": "x", "agent": "xmr/1.0"}, "id": 1}

21:26:29:772   1648   New connection: reset total hashes counters

_______________________________________________________________________________ _________________________________
However.. After several times of reboot it seems to logged in as my account again. see line 21:28:56:917   
I was in the midst of troubleshooting why my XMR earnings dropped almost 40%..
Please help

21:28:40:817   f70   
21:28:40:849   f70   ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
21:28:40:864   f70   º            Claymore CryptoNote GPU Miner  v9.7 Beta            º
21:28:40:864   f70   ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
21:28:41:099   f70   XMR: 1 pool is specified
21:28:41:099   f70   Main pool is fcn-xmr.pool.minergate.com:45590
21:28:41:817   f70   
Cards available: 2
21:28:41:817   f70   GPU #0: name: Ellesmere, 8192 MB available, 32 units
21:28:41:833   f70   GPU #1: name: Ellesmere, 8192 MB available, 32 units
21:28:41:833   f70   Total cards: 2
21:28:41:849   f70   Initializing...

21:28:41:849   f70   GPU #0 recognized as RX470
21:28:41:849   f70   card 0, m1 8192, m2 4048 w 256
21:28:41:864   f70   0 m = 2
21:28:41:864   f70   GPU #0: HashCnt = 1024
21:28:41:880   f70   GPU #1 recognized as RX470
21:28:41:880   f70   card 1, m1 8192, m2 4048 w 256
21:28:41:895   f70   1 m = 2
21:28:41:895   f70   GPU #1: HashCnt = 1024
21:28:41:911   f70   POOL version
21:28:41:911   f70   b155
21:28:47:442   f70   GPU #0: -a 1 mode selected
21:28:47:458   f70   GPU #1: -a 1 mode selected
21:28:56:636   f70   1 pool specified.
21:28:56:652   f70   Remote management (READ-ONLY MODE) is enabled on port 3333
21:28:56:699   1fcc   DevFee: Stratum - connecting to 'fcn-xmr.pool.minergate.com' <176.9.47.243> port 45590 (unsecure)
21:28:56:917   15f0   send: {"method": "login", "params": {"login": "[email protected]", "pass": "x", "agent": "xmr/1.0"}, "id": 1}

newbie
Activity: 10
Merit: 0
February 07, 2017, 05:12:09 AM
Unconfirmed balance is zero last as i check, the ratio of bad shares are 1000:1. No rejected shares at all
This got me wondering what have gone wrong..
Jump to: