Suprnova im still waiting for yu to add the polo wallet id so i can use your pool any update
Very soon, I'm testing currently.
Hi #ocminer is this up and running yet? Where does the polo id go?
Topic: Claymore's CryptoNote AMD GPU Miner v11.3 - page 143. (Read 2145043 times)
Very soon, I'm testing currently.
Hi #ocminer is this up and running yet? Where does the polo id go?
Nanopool is supporting Monero mining with SSL connetions now.
Welcome to our pool https://xmr.nanopool.org
i'm mining till two hours at 700h/s but no xmr in unconfirmed balance............Welcome to our pool https://xmr.nanopool.org
This pool best for mining XMR
https://minergate.com/a/e172e848728edd0d2b97b9b5
Nice try sneaking your referral link to trick noobs...
For anyone wanting to use Minergate, go to Minergate.com directly.
My advice for anyone with a lower hashrate is to use Dwarfpool.com.
Nanopool is supporting Monero mining with SSL connetions now.
Welcome to our pool https://xmr.nanopool.org
i'm mining till two hours at 700h/s but no xmr in unconfirmed balance............Welcome to our pool https://xmr.nanopool.org
This pool best for mining XMR
https://minergate.com/a/e172e848728edd0d2b97b9b5
Nanopool is supporting Monero mining with SSL connetions now.
Welcome to our pool https://xmr.nanopool.org
i'm mining till two hours at 700h/s but no xmr in unconfirmed balance............Welcome to our pool https://xmr.nanopool.org
Well that's because no block was found, you know. The whole pool has around 250KH/s so it takes 6 to 8 hours for a block apparently.
Nanopool is supporting Monero mining with SSL connetions now.
Welcome to our pool https://xmr.nanopool.org
i'm mining till two hours at 700h/s but no xmr in unconfirmed balance............ Welcome to our pool https://xmr.nanopool.org
Nanopool is supporting Monero mining with SSL connetions now.
Welcome to our pool https://xmr.nanopool.org
Welcome to our pool https://xmr.nanopool.org
Looks nice! And - if I'm not wrong - I can mine XMR directly to an exchange address (using my unique payment ID).
i cannot do multi pool on some of my computers
because i have at least 2 computers, 1 with rx470's and other with r9380 each time i close cryptonote miner and run an other miner computer crash sometimes immediately sometime after 1 minute but after reboot it s fine again until i rerun cryptonote and reswitch to an other miner
because i have at least 2 computers, 1 with rx470's and other with r9380 each time i close cryptonote miner and run an other miner computer crash sometimes immediately sometime after 1 minute but after reboot it s fine again until i rerun cryptonote and reswitch to an other miner
Nanopool is supporting Monero mining with SSL connetions now.
Welcome to our pool https://xmr.nanopool.org
Welcome to our pool https://xmr.nanopool.org
meh, proxy isn't fully supported, low performance
Is a . after kraken.com delete is and put a space
......u https://www.kraken.com -WALLET
Try to remove "https://www.kraken.com.-WALLET/"
I thought you had to specify the exchange when mining direct
......u https://www.kraken.com -WALLET
setx GPU_MAX_ALLOC_PERCENT 100
NsGpuCNMiner.exe -o stratum+tcp://xmr-eu.dwarfpool.com:8050 -u https://www.kraken.com.-WALLET/xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxen.3 -p x -a 4
I know I'm doing something wrong here
NsGpuCNMiner.exe -o stratum+tcp://xmr-eu.dwarfpool.com:8050 -u https://www.kraken.com.-WALLET/xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxen.3 -p x -a 4
I know I'm doing something wrong here
Try to remove "https://www.kraken.com.-WALLET/"
I thought you had to specify the exchange when mining direct
setx GPU_MAX_ALLOC_PERCENT 100
NsGpuCNMiner.exe -o stratum+tcp://xmr-eu.dwarfpool.com:8050 -u https://www.kraken.com.-WALLET/xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxen.3 -p x -a 4
I know I'm doing something wrong here
NsGpuCNMiner.exe -o stratum+tcp://xmr-eu.dwarfpool.com:8050 -u https://www.kraken.com.-WALLET/xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxen.3 -p x -a 4
I know I'm doing something wrong here
Try to remove "https://www.kraken.com.-WALLET/"
I thought you had to specify the exchange when mining direct
setx GPU_MAX_ALLOC_PERCENT 100
NsGpuCNMiner.exe -o stratum+tcp://xmr-eu.dwarfpool.com:8050 -u https://www.kraken.com.-WALLET/xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxen.3 -p x -a 4
I know I'm doing something wrong here
NsGpuCNMiner.exe -o stratum+tcp://xmr-eu.dwarfpool.com:8050 -u https://www.kraken.com.-WALLET/xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxen.3 -p x -a 4
I know I'm doing something wrong here
Try to remove "https://www.kraken.com.-WALLET/"
setx GPU_MAX_ALLOC_PERCENT 100
NsGpuCNMiner.exe -o stratum+tcp://xmr-eu.dwarfpool.com:8050 -u https://www.kraken.com.-WALLET/xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxen.3 -p x -a 4
I know I'm doing something wrong here
NsGpuCNMiner.exe -o stratum+tcp://xmr-eu.dwarfpool.com:8050 -u https://www.kraken.com.-WALLET/xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxen.3 -p x -a 4
I know I'm doing something wrong here
HELP!!! cant figure this out
setx GPU_MAX_ALLOC_PERCENT 100
NsGpuCNMiner.exe -o stratum+tcp://xmr-eu.dwarfpool.com:8050 -u https://www.kraken.com.-WALLET/xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxen.3 -p x -a 4
I know I'm doing something wrong here
NsGpuCNMiner.exe -o stratum+tcp://xmr-eu.dwarfpool.com:8050 -u https://www.kraken.com.-WALLET/xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxen.3 -p x -a 4
I know I'm doing something wrong here
trying to mine on dwarfpool but I cant figure out the batch file to mine straight to kraken exchange.
Everytime I try it keeps saying Wrong wallet address
Everytime I try it keeps saying Wrong wallet address
I copy paste dwarfpool instructions:
Quote
You can also mine direct to any exchange. Add after Exchange-WALLET your personal Payment-ID, workers can be added via WORKER-ID as well
-u EXCHANGE-WALLET.PERSONAL-PAYMENT-ID -p x
-u EXCHANGE-WALLET.PERSONAL-PAYMENT-ID.rig777 -p [email protected]
EXCHANGE-WALLET/YOUR-WALLET and PERSONAL-PAYMENT-ID and WORKER-ID must be dot-separated! Put WORKER-ID at the end
Do not mine to an exchange address without payment-id
-u EXCHANGE-WALLET.PERSONAL-PAYMENT-ID -p x
-u EXCHANGE-WALLET.PERSONAL-PAYMENT-ID.rig777 -p [email protected]
EXCHANGE-WALLET/YOUR-WALLET and PERSONAL-PAYMENT-ID and WORKER-ID must be dot-separated! Put WORKER-ID at the end
Do not mine to an exchange address without payment-id
trying to mine on dwarfpool but I cant figure out the batch file to mine straight to kraken exchange.
Everytime I try it keeps saying Wrong wallet address
Everytime I try it keeps saying Wrong wallet address
Hi @claymore, please fix that "-fanmin", "-fanmax", "-tstop", "-powlim", "-cvddc", "-mvddc" options. its make windows crash often.
because i tried setting from watttool its stable a whole day.
thanks claymore !
because i tried setting from watttool its stable a whole day.
thanks claymore !
Not sure about the other values, but I can confirm my rigs lock up after between 6-18 hours if I specify a value for tstop, but are rock solid if I do not specify it.
My rigs are all reference 480's on Cryptonote miner 9.7.
Still having problems with the fan speed
1 card is working at 0% and the other one at 100%
at v9.6 this would happen after 1 hour of mining
at v9.7 i could farm like 12hours and then started to acting weird
1 card is working at 0% and the other one at 100%
at v9.6 this would happen after 1 hour of mining
at v9.7 i could farm like 12hours and then started to acting weird
Whenever I try to start miner it seems like it connects but then it starts saying "cannot find block data" or "cannot convert blob data" ... Does anyone
know what the problem is ? On another note , after it fails to connect , it goes to the epools.txt file and connects to another server no problem and
starts to mine. Thanks in advance for your help.
know what the problem is ? On another note , after it fails to connect , it goes to the epools.txt file and connects to another server no problem and
starts to mine. Thanks in advance for your help.
Hello, Claymore.
Thanks for your work.
Could you update your CPU miner as well for ssl and username support.
Thanks for your work.
Could you update your CPU miner as well for ssl and username support.
9.7 is supporting usernames...
He's referring to CPU Miner... Not GPU. CPU Version latest is 3.5 and doesnt support username.
ah missed that
Jump to: