Topic: Claymore's CryptoNote AMD GPU Miner v11.3 - page 149. (Read 2145043 times)

Hub workers are workers that jump from coin to coin based on profitability.  You create a hub worker by pointing at the appropriate port.  If you point to a port associated with a specific coin then you will only mine that specific coin and you will find your workers listed in the workers section of that coin.

The port you have listed above is for mining XMR only so you will find your workers listed here:
https://monero.miningpoolhub.com/index.php?page=account&action=workers

If you change the port to 17024 you will be on the cryptonight multipool and your workers will show as hub workers and switch between the coins on that port.  You can see the multipool port numbers on the home page.

In the furnace of 9.7

I am happy that you got your things going well,and i don't even know you.
And i am happy that you sleep well. Lot of people having sleeping problems.
Thank you for the support.

How is Moderator allowing a person to post openly and freely the circumvention of a software? Shouldnt this guy be banned or something?
Mate, why are you so intent on stealing someone else's hard work for your gain? We get it, you are selling a "solution" to bypass the % fee. But you are just disgraceful in my eyes. I know CM is earning enough money to buy a few islands some where. But without his software, I would be in the gutter. And with or without your cheating software, I know I ll sleep better not partaking in your thieving. Just remember what harm you cause others, you will bear it in return.

Shares that you can get for free...bonus

PM me for more info

the lowest stable voltage is 917mv

Thank you for the answer. I have 1300-1600W (gold) PSUs and VER005 USB risers. I turned the rigs back to ZEC mining and everything works fine and stable. My last idea was to change the driver.

my rx-480 sappfire nitro+ 4gb hungs with such clocks

Miner is compiled with 15.12 drivers, but for Polaris cards you cannot use 15.x drivers, so use 16.x drivers, currently I use 16.11.3 for tests.
If you don't overclock your cards, check PSU and risers.

Anyone using miningpoolhub.com, I am not seeing my miner show up on their Hub Worker Configuration page, I decided to keep it simple and use 9.7 and created an account and used claymores original config

-o ssl://us-east.cryptonight-hub.miningpoolhub.com:20580
-u myusername.1
-p x

and my worker window is saying all is working with no errors, but the miningpool is still saying "You have no workers configured" after 30 minutes of mining and after clicking the "Update Workers" button.

Just wondering if it's me or something else, any ideas guys?
Here's my log
15:42:56:110   2dac   
15:42:56:114   2dac   ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
15:42:56:119   2dac   º            Claymore CryptoNote GPU Miner  v9.7 Beta            º
15:42:56:125   2dac   ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
15:42:56:333   2dac   XMR: 2 pools are specified
15:42:56:338   2dac   Main pool is us-east.cryptonight-hub.miningpoolhub.com:20580
15:42:57:009   2dac   
Cards available: 3
15:42:57:016   2dac   GPU #0: name: Ellesmere, 4096 MB available, 36 units
15:42:57:026   2dac   GPU #1: name: Ellesmere, 4096 MB available, 32 units
15:42:57:033   2dac   GPU #2: name: Ellesmere, 4096 MB available, 36 units
15:42:57:041   2dac   Total cards: 3
15:42:57:053   2dac   Initializing...

15:42:57:062   2dac   GPU #0 recognized as RX480
15:42:57:069   2dac   card 0, m1 4096, m2 3838 w 288
15:42:57:076   2dac   0 m = 2
15:42:57:084   2dac   GPU #0: HashCnt = 1024
15:42:57:093   2dac   GPU #1 recognized as RX470
15:42:57:100   2dac   card 1, m1 4096, m2 3838 w 256
15:42:57:107   2dac   1 m = 2
15:42:57:114   2dac   GPU #1: HashCnt = 1024
15:42:57:121   2dac   GPU #2 recognized as RX480
15:42:57:127   2dac   card 2, m1 4096, m2 3838 w 288
15:42:57:135   2dac   2 m = 2
15:42:57:143   2dac   GPU #2: HashCnt = 1024
15:42:57:155   2dac   POOL version
15:42:57:162   2dac   b155
15:43:02:032   2dac   GPU #0: -a 1 mode selected
15:43:02:037   2dac   GPU #1: -a 1 mode selected
15:43:02:044   2dac   GPU #2: -a 1 mode selected
15:43:11:492   2dac   2 pools specified.
15:43:11:497   2dac   Remote management (READ-ONLY MODE) is enabled on port 3333
15:43:11:670   2e20   DevFee: Stratum - connecting to 'us-east.cryptonight-hub.miningpoolhub.com' <45.55.57.211> port 20580 (SSL/TLS)
15:43:12:043   322c   cert subject: /O=mph
15:43:12:050   322c   cert issuer: /O=mph
15:43:12:058   322c   SSL/TLS encryption is enabled
15:43:12:065   322c   send: {"method": "login", "params": {"login": "Hal1000.1", "pass": "x", "agent": "xmr/1.0"}, "id": 1}

15:43:12:073   322c   Stratum - Connected (SSL/TLS)
15:43:12:079   322c   New connection: reset total hashes counters
15:43:12:193   2e20   got 303 bytes
15:43:12:197   2e20   buf: {"id":1,"jsonrpc":"2.0","error":null,"result":{"id":"887441051541827","job":{"blob":"0305faf5bec305ebfacb1872f19d461bb8742f72fe2f55143def87e049bc6b9a08dfdfe94e95830 00000007f697edbd4b9bf4d62ea3a94309b5783b4b1ef15aa1c72b7a44a0efbd0aa165f02","job_id":"670237678266130","target":"e2530000"},"status":"OK"}}

15:43:12:202   2e20   parse packet: 303
15:43:12:208   2e20   new buf size: 0
15:43:12:213   2e20   DevFee: Pool Diff 200008
15:43:12:223   322c   got 303 bytes
15:43:12:227   322c   buf: {"id":1,"jsonrpc":"2.0","error":null,"result":{"id":"739083262230269","job":{"blob":"0305fcf5bec305ebfacb1872f19d461bb8742f72fe2f55143def87e049bc6b9a08dfdfe94e95830 0000000c7badadaa04366999f0c1b125d670ebfe73986d60bf9336663c35bc89e1d0dc002","job_id":"922516833804547","target":"e2530000"},"status":"OK"}}

15:43:12:232   322c   parse packet: 303
15:43:12:236   322c   new buf size: 0
15:43:12:241   322c   Pool Diff 200008
15:43:12:245   322c   df has same pool, skip
15:43:12:305   2fc4   Round
15:43:12:306   3ae8   Round
15:43:13:896   3860   GPU 2: HashCnt = 1024, time = 1541 ms, hashrate = 664 h/s
15:43:13:919   3860   Round
15:43:14:058   3354   GPU 1: HashCnt = 1024, time = 1709 ms, hashrate = 599 h/s
15:43:14:077   3354   Round
15:43:14:190   2f28   GPU 0: HashCnt = 1024, time = 1839 ms, hashrate = 556 h/s
15:43:14:206   2f28   Round
15:43:15:370   3ae8   GPU 2: HashCnt = 1024, time = 1426 ms, hashrate = 718 h/s
15:43:15:393   3ae8   Round
15:43:15:628   2fc4   GPU 1: HashCnt = 1024, time = 1524 ms, hashrate = 671 h

@claymore: Thank you for the many features and other improvements. I appreciate your work and the support you give to the hobby miners like me.

I have issues since I turned my rigs to XMR mining:

Is it a good idea to use CN miner with 16.10.3 ATI drivers or should I "downgrade" to 15.12 or an older 16.x version? I have 6*RX470 ref. 4GB Sapphire cards in my rigs, and I can't stabilize them. I tried with original/factory bios and settings, I also tried lower freq. and voltage, mem.timing mod, etc., but the OS (WIN10) always crashes.

Previously I used your awesome ZCASH miner and the rigs were rock-stable.

I think you should modify memory timing in the card's bios. If I use for my RX470 4GB ref. card the factory settings and only modify memory timings (copy the 1500 timing value to 1625,1750,2000) I get ~650h/s. Then I set memory clock from 1750Mhz to 1850Mhz and I get ~740h/s. So timing is important. I didn't try to set memory clock higher yet.

I have the same card, but on your setup give my only cca 5h/s more than on my setup.

Sapphire rx470 8G
core - 1300 at 980 mv
mem - 2150 at 910 mv
765 h/s

RX470 - core 1240, mem 2155 (700h/s)
RX480 - core 1250, mem 2200 (725h/s)

I have only 380x - core 1000, mem 1500 (550h/s)

Where's the latest Linux version?

what are bonus shares?

You can get the bonus shares on the new version too 

Another error on Linux version: