Topic: Claymore's CryptoNote AMD GPU Miner v11.3 - page 156. (Read 2145058 times)
two rigs with rx470 and one rig with rx480 all stock settings for now were running for hour or so than crashed and hanged system, i turned on logs now will check whats happening
Added to OP:
FAQ:
Q: I see too many devfee shares, it looks like devfee is 50%!
A: It's not true, please learn some theory about pool mining.
Some pools use vardiff - they change share target according miner speed. If miner is slow, pool set lower target share, and vice versa. It allows miner to send shares regularly, both fast and slow miners will send similar number of shares per minute, pool will not be overloaded by shares from fast miners and it will not lose slow miners that cannot find valuable shares often. By the way, when you mine solo the share target is block target (very high) so you will find shares very rarely but they will solve blocks and therefore will have maximal value.
Low share target means that miner will find a lot of cheaper shares, high share target means that miner will find fewer shares but they will be more valuable.
When share is found, miner displays share target, for example:
SHARE FOUND (target 10000)
or
DevFee: SHARE FOUND (target 1000)
Compare current targets for main and devfee connections. From example above, 10 devfee shares at target 1000 cost as one share at target 10000.
But devfee mining is very slow and therefore pool uses x10 lower target. So you see a lot of devfee shares but they are much cheaper than main shares.
FAQ:
Q: I see too many devfee shares, it looks like devfee is 50%!
A: It's not true, please learn some theory about pool mining.
Some pools use vardiff - they change share target according miner speed. If miner is slow, pool set lower target share, and vice versa. It allows miner to send shares regularly, both fast and slow miners will send similar number of shares per minute, pool will not be overloaded by shares from fast miners and it will not lose slow miners that cannot find valuable shares often. By the way, when you mine solo the share target is block target (very high) so you will find shares very rarely but they will solve blocks and therefore will have maximal value.
Low share target means that miner will find a lot of cheaper shares, high share target means that miner will find fewer shares but they will be more valuable.
When share is found, miner displays share target, for example:
SHARE FOUND (target 10000)
or
DevFee: SHARE FOUND (target 1000)
Compare current targets for main and devfee connections. From example above, 10 devfee shares at target 1000 cost as one share at target 10000.
But devfee mining is very slow and therefore pool uses x10 lower target. So you see a lot of devfee shares but they are much cheaper than main shares.
WTF???
Claymore's CryptoNote GPU Miner v9.7 - on start - i receive message:
"The ordinal 43 could not be located in the dynamic link library SSLEAY32.dll"
Claymore's CryptoNote GPU Miner v9.7 - on start - i receive message:
"The ordinal 43 could not be located in the dynamic link library SSLEAY32.dll"
Same on one of my rigs - WIN 8.1 on it.
But first is the message that msvcr110.dll is missing
P.S. Just added the missing file (directly in 9.7 folder) and everything is fine now...
I re-uploaded miner, added "msvcr110.dll" file.
Is it normal that my gpus run at 64% usage? I have a rig 6x7950 running at 2787 total speed but i want to know if it can run faster.
claymore 9.6 : 2000 h/s
claymore 9.7 : 1500 h/s
2 rx 480 nitro 8 Gb ( 1 with riser second on motherboard)
1 asus 480 strix ( plug in pcie on motherboard )
core at 1150 mhz and memory at 2000
Windows 10 64bits, 16 Gb ram, intel i7 skylake
What's wrong ?
claymore 9.7 : 1500 h/s
2 rx 480 nitro 8 Gb ( 1 with riser second on motherboard)
1 asus 480 strix ( plug in pcie on motherboard )
core at 1150 mhz and memory at 2000
Windows 10 64bits, 16 Gb ram, intel i7 skylake
What's wrong ?
Had the same issue make sure to put the -h 1024
solved my problem
Same speed for me on 480 nitro -750-755 , no errors (until now )
is there are any speed improvement in v9.7 ?
No speed improvement on HD7970, R9 380, R9 290 and R9 290X.
Using Clay's 9.6 on 2 rigs.
Spec: 10*msi rx470 8gb 1100/1980 (1625 straps, Elpida mem chips)... Sum hashrate for all cards 6.5MH/s (3250H/s per rig (5 cards)).
-a 1 (auto found)
-h 1024 (auto found)
Do no know what to chnge for better performanse (to get 7MH/s summary)
Spec: 10*msi rx470 8gb 1100/1980 (1625 straps, Elpida mem chips)... Sum hashrate for all cards 6.5MH/s (3250H/s per rig (5 cards)).
-a 1 (auto found)
-h 1024 (auto found)
Do no know what to chnge for better performanse (to get 7MH/s summary)
try increasing your core clock up to 1180. voltage about 920
claymore 9.6 : 2000 h/s
claymore 9.7 : 1500 h/s
2 rx 480 nitro 8 Gb ( 1 with riser second on motherboard)
1 asus 480 strix ( plug in pcie on motherboard )
core at 1150 mhz and memory at 2000
Windows 10 64bits, 16 Gb ram, intel i7 skylake
What's wrong ?
claymore 9.7 : 1500 h/s
2 rx 480 nitro 8 Gb ( 1 with riser second on motherboard)
1 asus 480 strix ( plug in pcie on motherboard )
core at 1150 mhz and memory at 2000
Windows 10 64bits, 16 Gb ram, intel i7 skylake
What's wrong ?
For 480- x nothing has been done. And, too, nothing has been done for 16 drivers. it is more 9.6.1 than 9.7)))
WTF???
Claymore's CryptoNote GPU Miner v9.7 - on start - i receive message:
"The ordinal 43 could not be located in the dynamic link library SSLEAY32.dll"
Claymore's CryptoNote GPU Miner v9.7 - on start - i receive message:
"The ordinal 43 could not be located in the dynamic link library SSLEAY32.dll"
Same on one of my rigs - WIN 8.1 on it.
But first is the message that msvcr110.dll is missing
you probably need to upgrade visual c++ runtimes, also for the ssl message you need to install open SSL libraries for 32/64 bits depending of your system
v9.7:
- reduced devfee, it's 2% now if you use secure SSL/TLS connection, currently miningpoolhub pool supports encrypted connections, see Readme for samples.
- added "allpools" option, use it if your pool requires Username.Worker instead of wallet address, or if you mine some fork of Monero.
- now all options can be stored in "config.txt" file.
- changed format of "pools.txt", now you can specify own settings for every failover pool. Since format was changed, failover pools file was renamed to "epools.txt".
- now "r" key reloads failover pools file, "s" shows current statistics, with digit keys you can disable/enable GPUs.
- improved support for EthMan, now all commands are supported.
- now remote management is working in read-only mode by default.
- added SSL/TLS encryption support for better security, see "-o" option description in Readme file for details.
- improved "-tt" and "-r" options.
- added "-fanmin", "-fanmax", "-tstop", "-powlim", "-cvddc", "-mvddc" options.
- added HTTP support for remote port.
- added "-retrydelay" option.
- added "-ftime" option.
- a lot of minor improvements.
PS. Too many changes, bugs are quite possible.
- reduced devfee, it's 2% now if you use secure SSL/TLS connection, currently miningpoolhub pool supports encrypted connections, see Readme for samples.
- added "allpools" option, use it if your pool requires Username.Worker instead of wallet address, or if you mine some fork of Monero.
- now all options can be stored in "config.txt" file.
- changed format of "pools.txt", now you can specify own settings for every failover pool. Since format was changed, failover pools file was renamed to "epools.txt".
- now "r" key reloads failover pools file, "s" shows current statistics, with digit keys you can disable/enable GPUs.
- improved support for EthMan, now all commands are supported.
- now remote management is working in read-only mode by default.
- added SSL/TLS encryption support for better security, see "-o" option description in Readme file for details.
- improved "-tt" and "-r" options.
- added "-fanmin", "-fanmax", "-tstop", "-powlim", "-cvddc", "-mvddc" options.
- added HTTP support for remote port.
- added "-retrydelay" option.
- added "-ftime" option.
- a lot of minor improvements.
PS. Too many changes, bugs are quite possible.
nice work man
are you gonna give some love to the CPU miner too ? also any plan to merge both of them someday ?
So I can't set 16gb virtual memory, some solution?
What about fan bug in Afterburner with RX 4xx ?
claymore 9.6 : 2000 h/s
claymore 9.7 : 1500 h/s
2 rx 480 nitro 8 Gb ( 1 with riser second on motherboard)
1 asus 480 strix ( plug in pcie on motherboard )
core at 1150 mhz and memory at 2000
Windows 10 64bits, 16 Gb ram, intel i7 skylake
What's wrong ?
claymore 9.7 : 1500 h/s
2 rx 480 nitro 8 Gb ( 1 with riser second on motherboard)
1 asus 480 strix ( plug in pcie on motherboard )
core at 1150 mhz and memory at 2000
Windows 10 64bits, 16 Gb ram, intel i7 skylake
What's wrong ?
WTF???
Claymore's CryptoNote GPU Miner v9.7 - on start - i receive message:
"The ordinal 43 could not be located in the dynamic link library SSLEAY32.dll"
Claymore's CryptoNote GPU Miner v9.7 - on start - i receive message:
"The ordinal 43 could not be located in the dynamic link library SSLEAY32.dll"
Same on one of my rigs - WIN 8.1 on it.
But first is the message that msvcr110.dll is missing
P.S. Just added the missing file (directly in 9.7 folder) and everything is fine now...
is there are any speed improvement in v9.7 ?
Has anyone gotten payout from dwarfpool? I mine to Bittrex account is it minimum for 5xmr even paid daily?
Nah the minimum is 1 xmr till you get pay. That's the amount i need to get before they send my xmr to my exchange account.
thanks Claymore!
THX Claymore. Finally no restrictions due to -nofee mode. Works fine with -allpools 1.
wtf???
devFee Equal to 50%
ssl miningpoolhub.com
devFee Equal to 50%
ssl miningpoolhub.com
Again and again.
https://bitcointalksearch.org/topic/m.17163634
I will put it to OP but I think it won't help.
wtf???
devFee Equal to 50%
ssl miningpoolhub.com
http://i87.fastpic.ru/big/2017/0105/0e/485c3b22e5ce39ec2206caf13a55ca0e.jpg
devFee Equal to 50%
ssl miningpoolhub.com
http://i87.fastpic.ru/big/2017/0105/0e/485c3b22e5ce39ec2206caf13a55ca0e.jpg
Jump to: