Claymore's CryptoNote AMD GPU Miner v11.3 - page 225.

superresistant

legendary

Activity: 2142

Merit: 1131

Quote from: shulio on October 08, 2014, 08:01:28 AM

Quote from: Claymore on October 08, 2014, 04:24:43 AM

Quote from: shulio on October 08, 2014, 03:34:58 AM

My rigs are with R9 270. Miner v9.0 and v8.0 keep crashing. It work 1-2 hours before crash. After restart it works another 1-2 hours. Version 7.0 is working without any problem.

1. How many GPUs in rig?
2. How much RAM installed?

6 GPU on every rig and 4GB of RAM, virtual memory is set on 17000MB. I can set it 20k-30k

Maybe you overclocked. In that case, it's the problem.

shulio

legendary

Activity: 1540

Merit: 1016

Quote from: Claymore on October 08, 2014, 04:24:43 AM

Quote from: shulio on October 08, 2014, 03:34:58 AM

My rigs are with R9 270. Miner v9.0 and v8.0 keep crashing. It work 1-2 hours before crash. After restart it works another 1-2 hours. Version 7.0 is working without any problem.

1. How many GPUs in rig?
2. How much RAM installed?

6 GPU on every rig and 4GB of RAM, virtual memory is set on 17000MB. I can set it 20k-30k

grouper fish

full member

Activity: 199

Merit: 100

v9.0 is working great, thanks

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: shulio on October 08, 2014, 03:34:58 AM

My rigs are with R9 270. Miner v9.0 and v8.0 keep crashing. It work 1-2 hours before crash. After restart it works another 1-2 hours. Version 7.0 is working without any problem.

1. How many GPUs in rig?
2. How much RAM installed?

shulio

legendary

Activity: 1540

Merit: 1016

My rigs are with R9 270. Miner v9.0 and v8.0 keep crashing. It work 1-2 hours before crash. After restart it works another 1-2 hours. Version 7.0 is working without any problem.

cooman

newbie

Activity: 8

Merit: 0

Quote from: antonio8 on October 07, 2014, 11:27:16 PM

I got my 270X uo to 450 h/s and I'll take that but I can't get my 280X past 445 for nothing.

It has the Elpida memory. I tried auto set, -a without the -h, -a with -h. Changed the -h from 832 (which it showed at beginning) 864 and 800. Nothing.

Runnung the 13.12 driver version on Windows 7. I can't down clock my core under 1,000 and have the memory at 1,575.

Elpida is slag , 7950 and 280x are the same speed 450H.
expect Claymore optimization.

antonio8

legendary

Activity: 1400

Merit: 1000

I got my 270X uo to 450 h/s and I'll take that but I can't get my 280X past 445 for nothing.

It has the Elpida memory. I tried auto set, -a without the -h, -a with -h. Changed the -h from 832 (which it showed at beginning) 864 and 800. Nothing.

Runnung the 13.12 driver version on Windows 7. I can't down clock my core under 1,000 and have the memory at 1,575.

UberMakedonische

member

Activity: 120

Merit: 10

Finally i tested and this is the best miner so far. I have 290 Tri-x and i am getting around 750/h per card with both drivers 14.7 and 13.12. Thanks for this Claymore. Wink

arielbit

legendary

Activity: 3416

Merit: 1059

Quote from: Claymore on October 06, 2014, 11:35:49 AM

Quote from: acha on October 06, 2014, 11:18:23 AM

Have any 6xx and 5xx cards. Minig with your miner, thanks :-)
Miner v8.0 working well.
Trying 9.0, see that:
Error in server response
: {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"Lowdifficultyshare"}}
Catalyst 13.12. Why? Turning no help me. Returning to 8.0. Slowly, but good:-)))

P.S. With 270x-280x cards 9.0 all ok!

Send me first 20-30 lines of the log so I can see what card you use and "-a" and "-h" values.

my 5830 also have that problem..i go back to v8.0

i've seen low difficulty share error too when 280x temps are high or when overclocking is too much

great work btw, performances are increased

E9800

sr. member

Activity: 250

Merit: 250

Very nice improvement.

My Results (Using the latest 14.9 AMD Drivers)
X3 270X went from around 1100 to 1280
X2 265X went from around 750 to 877
X3 290 went from around 1950 to 2150
X2 280X went from 1050 to 1150
1X 7750 went from 118 to 130
X2 290X went from 1550 to 1585

You need to release an Nvidia Miner. Keep up the good work.

cacanin

newbie

Activity: 14

Merit: 0

Quote from: Claymore on October 06, 2014, 08:31:43 AM

v9.0 is available:

- Improved speed by 5-15%, depends on card:
   About 810 h/s on stock 290X (Hynix memory).
   About 710 h/s on stock 290X (Elpida memory).
   About 690 h/s on stock 290 (Elpida memory).
   About 550 h/s on stock 280X (Hynix memory).
   About 440 h/s on stock 270X (Elpida memory).
   About 410 h/s on stock 270 (Elpida memory).
- Reduced dev fee, now it is 2.5%.
- Improved "-li" option, Windows freezes even less.
- Best "-a" and "-h" values are set automatically for 290X,290,280X,270X,270,6950_2GB cards.

Note: For cards that are not in this list you need to check different "-a" and "-h" values to get max speed.

Kasno Marko na Kosovo (oteto) stize !

Quote from: samaricanin on October 06, 2014, 05:49:04 AM

Quote from: cacanin on October 06, 2014, 04:55:16 AM

Quote from: dzonikg28 on October 04, 2014, 06:17:06 AM

Quote from: Oscilson on October 04, 2014, 06:00:29 AM

Quote from: dzonikg28 on October 04, 2014, 05:46:22 AM

Putin miner 1.3 way better for me on rigs with 280x ..i got 20% more coins on the pool compare to Claymore

Do you use Elpida memory?

dont know..i have different 280x cards from ASUS and Saphire

Putin radi kao doxa a ovo djubre od Klejmora od mene vise nece dobiti jedan jedini ser pa taman nemao fee !

"Putin miner much better than claymore,i will never return to claymore again even without fee"

Izostavio si DJUBRE !

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: wacko on October 06, 2014, 02:57:32 PM

Hi Claymore, will there be a new version for Linux? The latest available is 7.0, which crashes for me after a day of hashing, sometimes it lasts 2 days, sometimes it crashes an hour after the start.. and I've got a 280x with Elpida chips in my linux box, so I suppose the newer version should also be faster than the current 7.0... not to mention the fee difference.

Yes I will release v9.0 for Linux in a few days.

wacko

legendary

Activity: 1106

Merit: 1014

Hi Claymore, will there be a new version for Linux? The latest available is 7.0, which crashes for me after a day of hashing, sometimes it lasts 2 days, sometimes it crashes an hour after the start.. and I've got a 280x with Elpida chips in my linux box, so I suppose the newer version should also be faster than the current 7.0... not to mention the fee difference.

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: qqqq on October 06, 2014, 01:57:06 PM

I think you right, it's 13.12. Pasting ocl's from 14.7 in miner folder still works ?

I released two builds of v9.0: for Catalyst 13.12 and for Catalyst 14.x.
Just download miner for Catalyst 13.12 if you use Catalyst 13.12, it is about 1% faster than miner for Catalyst 14.x.

qqqq

legendary

Activity: 1596

Merit: 1011

Quote from: Claymore on October 06, 2014, 01:13:32 PM

Quote from: qqqq on October 06, 2014, 01:08:34 PM

With 8.0 it works ok.

Probably you are trying to start miner for Catalyst 14.7 on the system with Catalyst 13.x installed. Use appropriate miner version.
Also make sure that you updated all files, not only EXE file.

I think you right, it's 13.12. Pasting ocl's from 14.7 in miner folder still works ?

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: qqqq on October 06, 2014, 01:08:34 PM

With 8.0 it works ok.

Probably you are trying to start miner for Catalyst 14.7 on the system with Catalyst 13.x installed. Use appropriate miner version.
Also make sure that you updated all files, not only EXE file.

qqqq

legendary

Activity: 1596

Merit: 1011

With 8.0 it works ok.

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: acha on October 06, 2014, 11:18:23 AM

Have any 6xx and 5xx cards. Minig with your miner, thanks :-)
Miner v8.0 working well.
Trying 9.0, see that:
Error in server response
: {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"Lowdifficultyshare"}}
Catalyst 13.12. Why? Turning no help me. Returning to 8.0. Slowly, but good:-)))

P.S. With 270x-280x cards 9.0 all ok!

Send me first 20-30 lines of the log so I can see what card you use and "-a" and "-h" values.

acha

jr. member

Activity: 51

Merit: 10

Have any 6xx and 5xx cards. Minig with your miner, thanks :-)
Miner v8.0 working well.
Trying 9.0, see that:
Error in server response
: {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"Lowdifficultyshare"}}
Catalyst 13.12. Why? Turning no help me. Returning to 8.0. Slowly, but good:-)))

P.S. With 270x-280x cards 9.0 all ok!

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: Xdragon on October 06, 2014, 10:12:12 AM

I tried all mods for 270x(Elpida) and -a4 works best so far. -h is 512 by default, i did not change it.

I have 270 and 270X, both Elpida. For 270X I have 445h/s for "-a 1" and 436h/s for "-a 4". Well, the difference is small, so may be in some cases "-a 4" can be better.
Don't forget to use "m" key to see exact immediate hashrate. Main hashrate that miner shows can be less because miner calculates it as TotalHashes/TotalTime, hashes are not growing when miner is connecting to pool or when it is disconnected, but TotalTime is always growing. Therefore main hashrate value becomes less if pool is not working properly. But when you press "m" key you see "raw" hashrate based on one GPU round only, it is useful to compare hashrates for different "-a" and "-h" values.

Topic: Claymore's CryptoNote AMD GPU Miner v11.3 - page 225. (Read 2145041 times)