@Claymore
I have mostly older mid-range cards and my RX480 is garbage compared to them with cryptonote coins. I do however need the ASM files added for for Bonaire, Cape Varde, and Oland though. Since a few of my Cryptonote use AMD A-series processors the support or at least ability to use the iGpu would be nice again. The cards in your dual miner don't require the use the ASM bins, so why are you enforcing there use now with this miner. You would be correct in that I could just use v9.7 but at this point I'm having to run the unsupported cards on a separate rig. I do think you could have warned your users about the chips that aren't supported. You did remove the 4xxx and 5xxx/ 6xxx series which I give you credit for but like AMD and there Linux drivers your overall information was sorely lacking due to the omissions in both the op and readme file. If you could at the very least rectify the op and or readme file to reflect accurately what does and doesn't work that would be appreciated.
Topic: Claymore's CryptoNote AMD GPU Miner v11.3 - page 65. (Read 2145056 times)
Hi.Which driver is better to put?Claymore.CryptoNote 9.7 shows the no temperature.card heated up to 70. -tt does not help.Now are driver Beta for Blockchain. Claymore.CryptoNote 10.2 with temperature all is normal and the high hash but is disabled and finds a smaller share
I had it loose Hashrate on 1 card until rebooted and than show temp at 521 at another card.
It would be awesome if all people stopped using it to give claymore an incentive to fix it quickly.
It would be awesome if all people stopped using it to give claymore an incentive to fix it quickly.
I also met such a temp once.
No have to stop, just we all set -nofee 1
This miner is not working well right now, especially for etn. I really hope claymore fixed it because it is a better performer than the other ones, but no stability even with -nofee.
I had it loose Hashrate on 1 card until rebooted and than show temp at 521 at another card.
It would be awesome if all people stopped using it to give claymore an incentive to fix it quickly.
I had it loose Hashrate on 1 card until rebooted and than show temp at 521 at another card.
It would be awesome if all people stopped using it to give claymore an incentive to fix it quickly.
@biker it's not the same problem, I recognized vexermeister's bug because I had the same one but it's not like yours. -nofee will probably not solve your problem. I never encountered this one but try to check in logs, you can also try -dbg 1 parameter to see more details in your log files.
i also experience gpu0 with 0 hashrate after few minutes of having like 600+ hash.
gpu 0 hangs in opencl call exit
then miner will restart again. only restarting pc will make the gpu0 mine again with 600+ hashrate and will repeat same error.
Try with -nofee 1, it's due to nicehash devfee mining, Hope it will be fixed soon...
After use -nofee 1, rig worked about 2 hours with no Incorrect shares. But sudenly Killed and Clamores restarted itself.
I also use option -h 0. My clocks for Gigabyte 480 8GB Samsung are 1145/2000.
XMR: 12/11/17-22:20:41 - SHARE FOUND - (GPU 2)
Share accepted (74 ms)!
XMR: 12/11/17-22:20:44 - New job from etn.crypto-coins.club:21020 (FAILOVER 2)
XMR - Total Speed: 4966 H/s, Total Shares: 473, Rejected: 0, Time: 02:05
XMR: GPU0 831 H/s, GPU1 805 H/s, GPU2 833 H/s, GPU3 833 H/s, GPU4 831 H/s, GPU5 833 H/s
XMR: Stale share found - skip
XMR: Stale share found - skip
XMR: 12/11/17-22:20:48 - SHARE FOUND - (GPU 4)
XMR: 12/11/17-22:20:48 - SHARE FOUND - (GPU 5)
Share accepted (2 ms)!
Share accepted (39 ms)!
XMR: 12/11/17-22:20:49 - SHARE FOUND - (GPU 3)
XMR: 12/11/17-22:20:49 - SHARE FOUND - (GPU 3)
Share accepted (73 ms)!
Share accepted (109 ms)!
XMR: 12/11/17-22:20:54 - SHARE FOUND - (GPU 3)
Share accepted (79 ms)!
Killed
Hey everyone
is there any overclock or undervolt settings to tune for this miner? coming from mining ETH where memory overclock was key I'm not sure how to tune for XMR/ETN
Thanks for any hints
You should just put the settings about core and memory clock and voltage in the config.txt instead of the start.bat (1 line per command). In Ethereum miner it works in the opposite way. Weird that there isn't any mention about that in the readme file but at least it is a 2 way experiment, so it is relatively easy to find out where the settings work. is there any overclock or undervolt settings to tune for this miner? coming from mining ETH where memory overclock was key I'm not sure how to tune for XMR/ETN
Thanks for any hints
Are your GPU all Identical and same brands? I was thinking it is due to mem problem and -h issues, use -di to separate -h values to each card
Quote
i also experience gpu0 with 0 hashrate after few minutes of having like 600+ hash.
gpu 0 hangs in opencl call exit
then miner will restart again. only restarting pc will make the gpu0 mine again with 600+ hashrate and will repeat same error.
gpu 0 hangs in opencl call exit
then miner will restart again. only restarting pc will make the gpu0 mine again with 600+ hashrate and will repeat same error.
what's your GPU memory? have you tried to decrease your -h value? I often encountered this and decreasing the -h value solve it.
i also experience gpu0 with 0 hashrate after few minutes of having like 600+ hash.
gpu 0 hangs in opencl call exit
then miner will restart again. only restarting pc will make the gpu0 mine again with 600+ hashrate and will repeat same error.
Try with -nofee 1, it's due to nicehash devfee mining, Hope it will be fixed soon...
i also experience gpu0 with 0 hashrate after few minutes of having like 600+ hash.
gpu 0 hangs in opencl call exit
then miner will restart again. only restarting pc will make the gpu0 mine again with 600+ hashrate and will repeat same error.
Hey everyone
is there any overclock or undervolt settings to tune for this miner? coming from mining ETH where memory overclock was key I'm not sure how to tune for XMR/ETN
Thanks for any hints
is there any overclock or undervolt settings to tune for this miner? coming from mining ETH where memory overclock was key I'm not sure how to tune for XMR/ETN
Thanks for any hints
Claymore,
are we going to see a new version of this miner with 1800-2000Hash/s on Vega 56/64 ?
are we going to see a new version of this miner with 1800-2000Hash/s on Vega 56/64 ?
"-allpools" option is set
and then
"the miner hangs, then"
Q: Why is the miner hanging?
A: Because Nicehash are thieves, they stole my fucking money.
Q: and then?
A: it uses the "-nofee 1" option or it hose again.
and then
"the miner hangs, then"
Q: Why is the miner hanging?
A: Because Nicehash are thieves, they stole my fucking money.
Q: and then?
A: it uses the "-nofee 1" option or it hose again.
Or use "-r 1" option with restart.bat ou restart.sh and if Claymore crash your rig will reboot and start mining again.
Is not a solution but a workaround until they remove nicehash from Claymore.
Quote
how manny card you have ? 6 ? are they 4gb or 8 gb version ?
how much virtuall mem you put ?
put 32 ,48 or 64 gb virtual memory
try -h 895 -dmem 1 ; -h 1700 -dmem 0 ...
how much virtuall mem you put ?
put 32 ,48 or 64 gb virtual memory
try -h 895 -dmem 1 ; -h 1700 -dmem 0 ...
It is no matter if 4GB or 8GB. Eg. Gigabyte 480 8GB Samsung.
Cards are 470/480, rig 6 cards. System is Simplemining.pl on USB 16GB.
"-allpools" option is set
and then
"the miner hangs, then"
Q: Why is the miner hanging?
A: Because Nicehash are thieves, they stole my fucking money.
Q: and then?
A: it uses the "-nofee 1" option or it hose again.
and then
"the miner hangs, then"
Q: Why is the miner hanging?
A: Because Nicehash are thieves, they stole my fucking money.
Q: and then?
A: it uses the "-nofee 1" option or it hose again.
Hi,
I use Clamore's 10,2 on Linux
My different rigs has same issue:
miner hangs, then it is resterted and then:
AMD ADL library not found.
OpenCL error 0 #101 - -61, cannot create GPU memory buffer
OpenCL error 0 #101a - -61, cannot create GPU memory buffer
OpenCL error 1 #101 - -61, cannot create GPU memory buffer
......
OpenCL error 5 #101a - -61, cannot create GPU memory buffer
XMR: Stratum - connecting to 'etn.crypto-coins.club' <37.187.29.172> port 21020
"-allpools" option is set, default pools can be used for devfee, chec
.............after this speed is ZERO and no minning ..............
GPU #4: Ellesmere
GPU #5: Ellesmere
XMR - Total Speed: 0 H/s, Total Shares: 0(0+0+0+0+0+0), Rejected: 0, Time: 00:01
XMR: GPU0 0 H/s, GPU1 0 H/s, GPU2 0 H/s, GPU3 0 H/s, GPU4 0 H/s, GPU5 0 H/s
Incorrect XMR shares: none
1 minute average XMR total speed: 0 H/s
I use:
-xpool stratum+tcp://etn.crypto-coins.club:21020 -xwal etn_adress -xpsw x -h 0 -mport -3333
On other pools also same issue.
Please help.
how manny card you have ? 6 ? are they 4gb or 8 gb version ?I use Clamore's 10,2 on Linux
My different rigs has same issue:
miner hangs, then it is resterted and then:
AMD ADL library not found.
OpenCL error 0 #101 - -61, cannot create GPU memory buffer
OpenCL error 0 #101a - -61, cannot create GPU memory buffer
OpenCL error 1 #101 - -61, cannot create GPU memory buffer
......
OpenCL error 5 #101a - -61, cannot create GPU memory buffer
XMR: Stratum - connecting to 'etn.crypto-coins.club' <37.187.29.172> port 21020
"-allpools" option is set, default pools can be used for devfee, chec
.............after this speed is ZERO and no minning ..............
GPU #4: Ellesmere
GPU #5: Ellesmere
XMR - Total Speed: 0 H/s, Total Shares: 0(0+0+0+0+0+0), Rejected: 0, Time: 00:01
XMR: GPU0 0 H/s, GPU1 0 H/s, GPU2 0 H/s, GPU3 0 H/s, GPU4 0 H/s, GPU5 0 H/s
Incorrect XMR shares: none
1 minute average XMR total speed: 0 H/s
I use:
-xpool stratum+tcp://etn.crypto-coins.club:21020 -xwal etn_adress -xpsw x -h 0 -mport -3333
On other pools also same issue.
Please help.
how much virtuall mem you put ?
put 32 ,48 or 64 gb virtual memory
try -h 895 -dmem 1 ; -h 1700 -dmem 0 ...
Is there anyone mining cryptonight with claymore xmr 10.2 without the gpu errors? i am running claymore xmr 9.7 perfectly with my R9 280Xs.
yup
if you use 10.2 miner with 270/x 280/x 7850(2gb) card you will have 15-20% incorret sharre (... gpu errors ... try to low -h parameter... message)
its to much
lowering -h parameter, changing display driver, raising virtual memory ... will not fix...
i suppose clay more don t have time to to TRY to fix miner for those old cards
Hi,
I use Clamore's 10,2 on Linux
My different rigs has same issue:
miner hangs, then it is resterted and then:
AMD ADL library not found.
OpenCL error 0 #101 - -61, cannot create GPU memory buffer
OpenCL error 0 #101a - -61, cannot create GPU memory buffer
OpenCL error 1 #101 - -61, cannot create GPU memory buffer
......
OpenCL error 5 #101a - -61, cannot create GPU memory buffer
XMR: Stratum - connecting to 'etn.crypto-coins.club' <37.187.29.172> port 21020
"-allpools" option is set, default pools can be used for devfee, chec
.............after this speed is ZERO and no minning ..............
GPU #4: Ellesmere
GPU #5: Ellesmere
XMR - Total Speed: 0 H/s, Total Shares: 0(0+0+0+0+0+0), Rejected: 0, Time: 00:01
XMR: GPU0 0 H/s, GPU1 0 H/s, GPU2 0 H/s, GPU3 0 H/s, GPU4 0 H/s, GPU5 0 H/s
Incorrect XMR shares: none
1 minute average XMR total speed: 0 H/s
I use:
-xpool stratum+tcp://etn.crypto-coins.club:21020 -xwal etn_adress -xpsw x -h 0 -mport -3333
On other pools also same issue.
Please help.
I use Clamore's 10,2 on Linux
My different rigs has same issue:
miner hangs, then it is resterted and then:
AMD ADL library not found.
OpenCL error 0 #101 - -61, cannot create GPU memory buffer
OpenCL error 0 #101a - -61, cannot create GPU memory buffer
OpenCL error 1 #101 - -61, cannot create GPU memory buffer
......
OpenCL error 5 #101a - -61, cannot create GPU memory buffer
XMR: Stratum - connecting to 'etn.crypto-coins.club' <37.187.29.172> port 21020
"-allpools" option is set, default pools can be used for devfee, chec
.............after this speed is ZERO and no minning ..............
GPU #4: Ellesmere
GPU #5: Ellesmere
XMR - Total Speed: 0 H/s, Total Shares: 0(0+0+0+0+0+0), Rejected: 0, Time: 00:01
XMR: GPU0 0 H/s, GPU1 0 H/s, GPU2 0 H/s, GPU3 0 H/s, GPU4 0 H/s, GPU5 0 H/s
Incorrect XMR shares: none
1 minute average XMR total speed: 0 H/s
I use:
-xpool stratum+tcp://etn.crypto-coins.club:21020 -xwal etn_adress -xpsw x -h 0 -mport -3333
On other pools also same issue.
Please help.
Hello,
Have you increased your page file size?
http://www.thewindowsclub.com/increase-page-file-size-virtual-memory-windows
Hi,
I use Clamore's 10,2 on Linux
My different rigs has same issue:
miner hangs, then it is resterted and then:
AMD ADL library not found.
OpenCL error 0 #101 - -61, cannot create GPU memory buffer
OpenCL error 0 #101a - -61, cannot create GPU memory buffer
OpenCL error 1 #101 - -61, cannot create GPU memory buffer
......
OpenCL error 5 #101a - -61, cannot create GPU memory buffer
XMR: Stratum - connecting to 'etn.crypto-coins.club' <37.187.29.172> port 21020
"-allpools" option is set, default pools can be used for devfee, chec
.............after this speed is ZERO and no minning ..............
GPU #4: Ellesmere
GPU #5: Ellesmere
XMR - Total Speed: 0 H/s, Total Shares: 0(0+0+0+0+0+0), Rejected: 0, Time: 00:01
XMR: GPU0 0 H/s, GPU1 0 H/s, GPU2 0 H/s, GPU3 0 H/s, GPU4 0 H/s, GPU5 0 H/s
Incorrect XMR shares: none
1 minute average XMR total speed: 0 H/s
I use:
-xpool stratum+tcp://etn.crypto-coins.club:21020 -xwal etn_adress -xpsw x -h 0 -mport -3333
On other pools also same issue.
Please help.
I use Clamore's 10,2 on Linux
My different rigs has same issue:
miner hangs, then it is resterted and then:
AMD ADL library not found.
OpenCL error 0 #101 - -61, cannot create GPU memory buffer
OpenCL error 0 #101a - -61, cannot create GPU memory buffer
OpenCL error 1 #101 - -61, cannot create GPU memory buffer
......
OpenCL error 5 #101a - -61, cannot create GPU memory buffer
XMR: Stratum - connecting to 'etn.crypto-coins.club' <37.187.29.172> port 21020
"-allpools" option is set, default pools can be used for devfee, chec
.............after this speed is ZERO and no minning ..............
GPU #4: Ellesmere
GPU #5: Ellesmere
XMR - Total Speed: 0 H/s, Total Shares: 0(0+0+0+0+0+0), Rejected: 0, Time: 00:01
XMR: GPU0 0 H/s, GPU1 0 H/s, GPU2 0 H/s, GPU3 0 H/s, GPU4 0 H/s, GPU5 0 H/s
Incorrect XMR shares: none
1 minute average XMR total speed: 0 H/s
I use:
-xpool stratum+tcp://etn.crypto-coins.club:21020 -xwal etn_adress -xpsw x -h 0 -mport -3333
On other pools also same issue.
Please help.
Jump to: