v11 puts all my Samsung 480/580 8gb over 1k H/s, I can almost see that un-modded vega 56...
Yup, getting 1000 give or take with 11 on a Asus 580 w/ Samsung.
Still can't get an MSI 580 with Hynix over 850.
Topic: Claymore's CryptoNote AMD GPU Miner v11.3 - page 61. (Read 2145056 times)
Yup, getting 1000 give or take with 11 on a Asus 580 w/ Samsung.
Still can't get an MSI 580 with Hynix over 850.
AMD is cock-blocking by limiting 550 OpenCL to Windows and by proxy the max number of GPUs to 8.
It's not that bad, it's doing about 400ish with xmr-stak and its rather cheap and easy to find.
Really? What cards are doing 400? my 560s are doing 450, so with the reduced cost and wattage I'd be very very interested.
^^^ It might just be the best card on Watts per H/s. However AMD still refuses to support OpenCL under Linux and I can't get the flgrx open source drivers working on 16.04.
Sorry, I don't not support very old cards anymore.
How about very NEW? Still no support for Polaris_12 (RX 550) ?
We need support for RX550. The card is not that old really.
RX550 is not a good card for mining really, I dont think claymore will spend time on that...the hashrate density is just awful
edit: maybe try another xmr software
Sorry, I don't not support very old cards anymore.
How about very NEW? Still no support for Polaris_12 (RX 550) ?
We need support for RX550. The card is not that old really.
RX550 is not a good card for mining really, I dont think claymore will spend time on that...the hashrate density is just awful
edit: maybe try another xmr software
For tahiti and Pitcairn it seems still 9.7 is fastest 
Very good speedup on Polaris!, 20-30h/s per card or even more
Very good speedup on Polaris!, 20-30h/s per card or even more
Hmm, in my tests v11 is a bit faster for both Tahiti and Pitcairn, or at least the same. May be you use not optimal settings.
still no support for old HD 7700/7800 cards 
(don't say anything about 9.7 version please, which doesn't have magical "-allcoins" option)
(don't say anything about 9.7 version please, which doesn't have magical "-allcoins" option)
Sorry, I don't not support very old cards anymore.
My experience is the same as restless. On my two gigabyte 270OC, 9.7 is still the best.
11.0
-h 448 -dmem 1 (11.0 default) - OpenCL hang.
-h 512 -dmem 0 - 840h/s
-h 256 -dmem 1 - 810h/s
9.7
-h 512 (default) - 855-860h/s
version 11 still sucks
10rx 580 8gb
calymmore 11
9,05khs
100% cpu/ramload
1040watts from the wall
devfee
sgminer
9,2khs
nearly no cpu/ramload
1000watts from the wall
no fee
sorry better luck next time
10rx 580 8gb
calymmore 11
9,05khs
100% cpu/ramload
1040watts from the wall
devfee
sgminer
9,2khs
nearly no cpu/ramload
1000watts from the wall
no fee
sorry better luck next time
On version 11.0 , with "Tahiti LE" ("HD7870 XT"), still too many "GPU0 found incorrect share". On v9.7 or other miners, no problems.
Sorry, I don't not support very old cards anymore.
How about very NEW? Still no support for Polaris_12 (RX 550) ?
We need support for RX550. The card is not that old really.
Thanks for the new version Claymore.
I'm seeing 70h/s speed improvement on my RX570's, has anyone compared power usage at the wall yet?
I'm seeing 70h/s speed improvement on my RX570's, has anyone compared power usage at the wall yet?
^^
Thanks, am playing wit them now. Any idea how I get paid of when?
All I can see is that I'm getting shares but after two days nothing.
MY wallet is a monerujo phone wallet.
Should I be using just one pool?
Just easy ----> ADDRESS.7850/mysecret
so you found a worker called 7850 beneath your statistics
mysecret you have to put in to change your payout limit
you dont need a valid email-address
-----------snip-----------
To be able to change your settings you must use the email optional parameter with every miner you have, and it's value must be the same. To find examples how to mine with email using your miner, please check the Help page (EMAIL / YOUR_EMAIL is what you should replace with your email). You can use a real email to receive offline workers notifications from the pool or just a secret word to access the settings.
---------snap------------
So I'm getting 'incorrect address'.
I have two workers, but one I'm using tsiv miner on an Nvidia card, I have no email address parameter in that config file,
it says all workers should have this, you think that can cause the issue?
It also says I need a 10 rating, which I'm not sure I have.
[/quote]
[/quote]
yes thats the issue you have to submit at least 10 shares with both miner and correct 'worker' and 'email' !
^^
Thanks, am playing wit them now. Any idea how I get paid of when?
All I can see is that I'm getting shares but after two days nothing.
MY wallet is a monerujo phone wallet.
Should I be using just one pool?
Just easy ----> ADDRESS.7850/mysecret
so you found a worker called 7850 beneath your statistics
mysecret you have to put in to change your payout limit
you dont need a valid email-address
-----------snip-----------
To be able to change your settings you must use the email optional parameter with every miner you have, and it's value must be the same. To find examples how to mine with email using your miner, please check the Help page (EMAIL / YOUR_EMAIL is what you should replace with your email). You can use a real email to receive offline workers notifications from the pool or just a secret word to access the settings.
---------snap------------
So I'm getting 'incorrect address'.
I have two workers, but one I'm using tsiv miner on an Nvidia card, I have no email address parameter in that config file,
it says all workers should have this, you think that can cause the issue?
It also says I need a 10 rating, which I'm not sure I have.
[/quote]
[/quote]
something is wrong wirth your wallet adress. dont mine on it . change , use normal , windows wallet ..
v11 puts all my Samsung 480/580 8gb over 1k H/s, I can almost see that un-modded vega 56...
Sorry, I don't not support very old cards anymore.
How about very NEW? Still no support for Polaris_12 (RX 550) ?
^^
Thanks, am playing wit them now. Any idea how I get paid of when?
All I can see is that I'm getting shares but after two days nothing.
MY wallet is a monerujo phone wallet.
Should I be using just one pool?
[/quote]
Just easy ----> ADDRESS.7850/mysecret
so you found a worker called 7850 beneath your statistics
mysecret you have to put in to change your payout limit
you dont need a valid email-address
-----------snip-----------
To be able to change your settings you must use the email optional parameter with every miner you have, and it's value must be the same. To find examples how to mine with email using your miner, please check the Help page (EMAIL / YOUR_EMAIL is what you should replace with your email). You can use a real email to receive offline workers notifications from the pool or just a secret word to access the settings.
---------snap------------
So I'm getting 'incorrect address'.
I have two workers, but one I'm using tsiv miner on an Nvidia card, I have no email address parameter in that config file,
it says all workers should have this, you think that can cause the issue?
It also says I need a 10 rating, which I'm not sure I have.
[/quote]
^^
Thanks, am playing wit them now. Any idea how I get paid of when?
All I can see is that I'm getting shares but after two days nothing.
MY wallet is a monerujo phone wallet.
Should I be using just one pool?
Thanks, am playing wit them now. Any idea how I get paid of when?
All I can see is that I'm getting shares but after two days nothing.
MY wallet is a monerujo phone wallet.
Should I be using just one pool?
First you should mine with ADDRESS.WORKER/EMAIL
you can see your income here :
https://xmr.nanopool.org/account/48dJamRDpppZ3Nh6W14EPaA794G6iuwQJ2Px8XsJarGjhiE1LQNSbXsgsLLQaZGoLnSwegv9bx5ocXrNbNADtkHgCag3XGp
under settings you have to type your (secret) EMAIL from above
minimum payment is 0.3 XMR !
Have a nice day
Thanks for this. When you say (secret), I'm not 100% sure what you mean?
Also, what is my worker? Just a nickname?
Do I need a valid email address?
Just easy ----> ADDRESS.7850/mysecret
so you found a worker called 7850 beneath your statistics
mysecret you have to put in to change your payout limit
you dont need a valid email-address
-----------snip-----------
To be able to change your settings you must use the email optional parameter with every miner you have, and it's value must be the same. To find examples how to mine with email using your miner, please check the Help page (EMAIL / YOUR_EMAIL is what you should replace with your email). You can use a real email to receive offline workers notifications from the pool or just a secret word to access the settings.
---------snap------------
r9 290 Ref, bios mod, 965/1250, drivers blockchain 23 aug
v10.2
810h/s(on pool.minexmr.com -12%), -h 880 (max stab val), -dmem 1, gpu temp = 75C
v11.0
790h/s(on pool.minexmr.com, testing...), -h 640 (default val), -dmem 1, gpu temp = 77C
SGMiner 5.5.5
715h/s(on pool.minexmr.com +/- real val), intensity 688, gpu temp = 77C
v10.2
810h/s(on pool.minexmr.com -12%), -h 880 (max stab val), -dmem 1, gpu temp = 75C
v11.0
790h/s(on pool.minexmr.com, testing...), -h 640 (default val), -dmem 1, gpu temp = 77C
SGMiner 5.5.5
715h/s(on pool.minexmr.com +/- real val), intensity 688, gpu temp = 77C
^^
Thanks, am playing wit them now. Any idea how I get paid of when?
All I can see is that I'm getting shares but after two days nothing.
MY wallet is a monerujo phone wallet.
Should I be using just one pool?
Thanks, am playing wit them now. Any idea how I get paid of when?
All I can see is that I'm getting shares but after two days nothing.
MY wallet is a monerujo phone wallet.
Should I be using just one pool?
First you should mine with ADDRESS.WORKER/EMAIL
you can see your income here :
https://xmr.nanopool.org/account/48dJamRDpppZ3Nh6W14EPaA794G6iuwQJ2Px8XsJarGjhiE1LQNSbXsgsLLQaZGoLnSwegv9bx5ocXrNbNADtkHgCag3XGp
under settings you have to type your (secret) EMAIL from above
minimum payment is 0.3 XMR !
Have a nice day
Thanks for this. When you say (secret), I'm not 100% sure what you mean?
Also, what is my worker? Just a nickname?
Do I need a valid email address?
For most cases, miner applies the best "-h" and "-dmem" values automatically. But you can find the best value manually:
1. Use "-dmem 0" and try several "-h" values to find the best hashrate. For example, you found that "-dmem 0 -h 512" is the best. It will require about 1GB GPU RAM.
2. Now set "-dmem 1" and divide "-h" value by two: "-dmem 1 -h 256". It will require about 1GB GPU RAM too.
3. Also try "-dmem 1 -h 512" if GPU has enough RAM, it will require about 2GB GPU RAM.
Note that using almost all available GPU memory usually causes slow working because drivers allocate memory incorrectly, reduce "-h" in this case.
In my tests "-dmem 1" must be used for all GPUs for best speed, except Vega which is not optimized properly yet.
1. Use "-dmem 0" and try several "-h" values to find the best hashrate. For example, you found that "-dmem 0 -h 512" is the best. It will require about 1GB GPU RAM.
2. Now set "-dmem 1" and divide "-h" value by two: "-dmem 1 -h 256". It will require about 1GB GPU RAM too.
3. Also try "-dmem 1 -h 512" if GPU has enough RAM, it will require about 2GB GPU RAM.
Note that using almost all available GPU memory usually causes slow working because drivers allocate memory incorrectly, reduce "-h" in this case.
In my tests "-dmem 1" must be used for all GPUs for best speed, except Vega which is not optimized properly yet.
Jump to: