Claymore's CryptoNote AMD GPU Miner v11.3 - page 63.

spronkin1

newbie

Activity: 9

Merit: 0

Hello! I have config file start-XMR-suprnova.bat:

Code:

TIMEOUT 10

@echo off
setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
@echo on

NsGpuCNMiner.exe -xpool ssl://xmr-eu.suprnova.cc:5221 -xwal avk113.Rig1 -xpsw x -allpools 1 -retrydelay 4 -ftime 45 -dbg -1 -mport 0 -r 1

pause

When i running it, i get an error:

Code:

╔════════════════════════════════════════════════════════════════╗
║ Claymore's CryptoNote AMD GPU Miner v10.2 Beta ║
╚════════════════════════════════════════════════════════════════╝

XMR: 1 pool is specified
Main Monero pool is xmr-eu.suprnova.cc:5221
At least 16 GB of Virtual Memory is required for multi-GPU systems
Make sure you defined GPU_MAX_ALLOC_PERCENT 100
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools
OpenCL initializing...
AMD Cards available: 4
GPU #0: Ellesmere, 4096 MB available, 36 compute units
GPU #0 recognized as Radeon RX 480/580
GPU #1: Ellesmere, 4096 MB available, 36 compute units
GPU #1 recognized as Radeon RX 480/580
GPU #2: Ellesmere, 4096 MB available, 36 compute units
GPU #2 recognized as Radeon RX 480/580
GPU #3: Ellesmere, 4096 MB available, 36 compute units
GPU #3 recognized as Radeon RX 480/580
POOL version
GPU #0 algorithm ASM, -h 900, -dmem 1 (Memory used: 3780MB)
GPU #1 algorithm ASM, -h 900, -dmem 1 (Memory used: 3780MB)
GPU #2 algorithm ASM, -h 900, -dmem 1 (Memory used: 3780MB)
GPU #3 algorithm ASM, -h 900, -dmem 1 (Memory used: 3780MB)
Total cards: 4
XMR: Stratum - connecting to 'xmr-eu.suprnova.cc' <37.187.24.170> port 5221 (SSL/TLS)
"-allpools" option is set, default pools can be used for devfee, check "Readme" file for details.
Watchdog enabled

SSL/TLS encryption is enabled
XMR: Stratum - Connected (xmr-eu.suprnova.cc:5221) (SSL/TLS)
Stratum - reading socket failed 0, disconnect
XMR: Job timeout, disconnect, retry in 4 sec...
XMR: Stratum - connecting to 'xmr-eu.suprnova.cc' <37.187.24.170> port 5221 (SSL/TLS)
SSL/TLS encryption is enabled
XMR: Stratum - Connected (xmr-eu.suprnova.cc:5221) (SSL/TLS)
Stratum - reading socket failed 0, disconnect
XMR: Job timeout, disconnect, retry in 4 sec...
XMR: Stratum - connecting to 'xmr-eu.suprnova.cc' <37.187.24.170> port 5221 (SSL/TLS)
SSL/TLS encryption is enabled
XMR: Stratum - Connected (xmr-eu.suprnova.cc:5221) (SSL/TLS)
Stratum - reading socket failed 0, disconnect

what happend? help, please!

ganzocrypt

newbie

Activity: 162

Merit: 0

hello,

I am using RX 580 8Gb and would like to know a typical -h (default is ok?) and if -dmem to set -li typical value , any suggestions?
Not sure what hashrate to expect.

thx

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: Rozerg on December 16, 2017, 03:09:27 AM

Claymore 10.2 dosen't work with new AMD Driver 17.2.1 - Adrenaline. param tt,ttli,tstop dosen't working. mining is working..

https://bitcointalksearch.org/topic/m.26397485

Trimegistus

legendary

Activity: 1564

Merit: 1027

Quote from: Integ on December 15, 2017, 11:07:25 PM

I'm sorry, but the https://mega.co.nz/#F!e4JVEAIJ!l1iF4z10fMyJzY5-LnyC2A is dead,
and the mirror https://drive.google.com/folderview?id=0B69wv2iqszefdkVDNkxla3BCZHc&usp=sharing Google does not allow to download because it finds a virus...

Try using Firefox to download, it will work!

Rozerg

newbie

Activity: 7

Merit: 0

Claymore 10.2 dosen't work with new AMD Driver 17.2.1 - Adrenaline. param tt,ttli,tstop dosen't working. mining is working..

Integ

legendary

Activity: 1036

Merit: 1010

!

I'm sorry, but the https://mega.co.nz/#F!e4JVEAIJ!l1iF4z10fMyJzY5-LnyC2A is dead,
and the mirror https://drive.google.com/folderview?id=0B69wv2iqszefdkVDNkxla3BCZHc&usp=sharing Google does not allow to download because it finds a virus...

jojoledemago

newbie

Activity: 10

Merit: 0

Quote from: carafleur on December 13, 2017, 05:14:07 PM

hello,
nicehash issues can be workedaround by adding this line to your hosts file:
127.0.0.1 cryptonight.usa.nicehash.com
claymore will quickly fail on this one and switch to miningpoolhub

Great ! This worked for me, I removed -nofee and wrote this line in my hosts file, here is the result when devfee comes :
https://img15.hostingpics.net/pics/49514020171209issue1solutionmodiffichierhosts.jpg
It's not very nice but it works !
Thank you carafleur !

spronkin1

newbie

Activity: 9

Merit: 0

Quote from: agtprvctr on September 29, 2017, 04:37:34 PM

Quote from: Claymore on September 29, 2017, 03:28:34 PM

This version is not so easy to use because you have to adjust "-h" and "-dmem" values often, I will try to improve it soon.
1. "-dmem 1" requires twice more memory, make sure you have enough virtual memory. For example, if you have 6 GPUs 8GB, set virtual memory to 6*8=48GB.
2. Check how much memory miner allocates, it shows something like "(Memory used: 5128MB)", make sure you have this memory on your GPU.
3. You can see low hashrate if you use almost all memory on GPU, try to reduce "-h" value a bit.

Guys if you are getting the "GpuMiner dk2an0 failed" error, be sure to note Claymore's comments above. I was initially getting the same error with my RX480 8GB rig. Lowering to -h 1024 will solve the issue but make the program only see 4GB on my cards. After changing page file to 48GB, the miner runs beautifully with default -h and -dmem settings.

Ellesmere RX480 8GB, same modded BIOS, default miner settings:
CryptoNote Miner 9.7 - 850 H/s
CryptoNote Miner 10 - 987 H/s

Thanks Claymore!

Thx Man!

twofreckles

sr. member

Activity: 366

Merit: 250

Quote from: Claymore on December 15, 2017, 04:53:50 PM

Miner uses the list of devfee pools if you specified "-allpools 1" option, it selects pool randomly, so it will find a good pool after a few attempts anyway, you don't lose anything because miner mines for you during these attempts.
In next update (2-3 days) I will update this list of pools and exclude nicehash.

I can say 100% sure, with -nofee 1 there is 80% less reboots. So at the end of the day we (miners) do lose because of it.

However some rigs reboots more often than others. I have no idea why does happen. Still I have chosen to go with nofee, despite the fact that it is slower, but with fewer number of reboots, hashrate on pools is higher anyway. But waiting for the update, as soon as will be stable I have nothing against paying some fee...

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Miner uses the list of devfee pools if you specified "-allpools 1" option, it selects pool randomly, so it will find a good pool after a few attempts anyway, you don't lose anything because miner mines for you during these attempts.
In next update (2-3 days) I will update this list of pools and exclude nicehash.

clems

member

Activity: 171

Merit: 10

Quote from: 6950TO7950 on December 15, 2017, 11:59:52 AM

Quote from: rascabily on December 15, 2017, 01:57:05 AM

why this error all time?
http://prntscr.com/hnqjcj

I have the same problem too but it relates to Claymore's devfee mining only. Don't know how to solve it, so I expect the pool and Claymore to solve it somehow.

Or just read the different post.
Nicehash hack so nicehash pool are not available.

add this on your hosts file

127.0.0.1 cryptonight.usa.nicehash.com

clems

member

Activity: 171

Merit: 10

Quote from: rascabily on December 15, 2017, 01:57:05 AM

why this error all time?
http://prntscr.com/hnqjcj

Because nicehash was hack.

Just add this in hosts file
127.0.0.1 cryptonight.usa.nicehash.com

rascabily

sr. member

Activity: 379

Merit: 250

Quote from: zxc003 on December 15, 2017, 01:23:34 PM

For everybody who has a low hashrate issue with RX 400/500 cards with v.10.2. First unzip 9.7 and then unzip 10.2 in 9.7 folder, or just add Data.bin file from 9.7 into 10.2 folder.

now? new error

http://prntscr.com/ho1dt7

sasykbaev

newbie

Activity: 3

Merit: 0

Quote from: zxc003 on December 15, 2017, 01:23:34 PM

For everybody who has a low hashrate issue with RX 400/500 cards with v.10.2. First unzip 9.7 and then unzip 10.2 in 9.7 folder, or just add Data.bin file from 9.7 into 10.2 folder.

Poboboval differently, nothing happened .... MISS the low speed on 480/580 cards please !!!!!

zxc003

member

Activity: 93

Merit: 10

For everybody who has a low hashrate issue with RX 400/500 cards with v.10.2. First unzip 9.7 and then unzip 10.2 in 9.7 folder, or just add Data.bin file from 9.7 into 10.2 folder.

6950TO7950

newbie

Activity: 11

Merit: 0

Quote from: rascabily on December 15, 2017, 01:57:05 AM

why this error all time?
http://prntscr.com/hnqjcj

I have the same problem too but it relates to Claymore's devfee mining only. Don't know how to solve it, so I expect the pool and Claymore to solve it somehow.

oli123

full member

Activity: 644

Merit: 100

Quote from: Omg9500 on December 13, 2017, 05:39:21 PM

Quote from: CryptonikaTrade on December 13, 2017, 06:16:08 AM

It is very best miner for cryptonight algo IMHO. I mine with it electroneum now

AMDXMR Miner gives me better results.... I mine ETN and KRB with this depending on profit for each coin. https://www.amdxmrminer.com/downloads/

I tried this miner AMDXMRMiner v0.65b even older v0.64b screen flashes black and the miner stops. I do not know where the problem may be. For me, this miner does not work. I had to reduce the intensity because the comp is freezing, followed by a restart or BSOD. Here's my startup file:
amdxmrminer.exe -p ....... -w ...... -psw x -i 5
And here I add the picture: https://imgur.com/bLyFPot
I also read the tutorial at https://www.amdxmrminer.com/ but did not help.
I'm staying with the Claymore CryptoNote AMD GPU Miner.

rascabily

sr. member

Activity: 379

Merit: 250

why this error all time?
http://prntscr.com/hnqjcj

FFI2013

hero member

Activity: 906

Merit: 507

Quote from: oli123 on December 14, 2017, 03:27:58 PM

Quote from: notbatman on December 14, 2017, 03:04:01 PM

^^^ -h primarily depends on the amount of video memory available, just let it atuo-tune unless there's a problem. Interesting coin you're mining there BTW.

edit:

I just visited their website and their into graphic immediatly made me think of wow vanilla only with premium graphics, but then I was like oh it's just a stupid CGI info graphic of trees and clicked on "project" ...

"We are a new gaming company. Our core business..."

edit_2:

Blakecoin was doing something along these lines, that project seems bit sluggish last I checked though.

These lines are only for testing because I wanted to try out the new Claymore CryptoNote AMD GPU Miner v10.2 Beta - POOL miner if it is more powerful than v9.7. XLC coins do not interest me at this time. About that value -h 832 I read in READme!!! document. But, when I do not set the value, there is low power, somewhere around 320 H/s for the card.

I have the same problem when I try auto tune the rig with my 570/470 my 570s are fine the 470 hashes at 300 something on my rig with 470 4gb and 8gb cards the rates are all over the place 340 to 600 nothing stable I tried setting the virtual memory th 50gb that didn't help so I'm using gatelessgate I don't get it claymore's miners are usually the best this new xmr miner sucks I can't get this stable on any of my rigs

RIGED

member

Activity: 182

Merit: 12

thnx Claymore

looking forward to mining with it

Topic: Claymore's CryptoNote AMD GPU Miner v11.3 - page 63. (Read 2145043 times)