Make them all Gen 1 at the bios plus change the PCE speed to 8x4x4, make sure its set at PEG.
Got 7 working no problem, Windows 10 Pro by the way, but all changes are at Bios level.
Are you sure a 1300 PSU can handle 6 RX480 plus the mobo?
Got 7 r9 390 running with 2 1300.
Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1026. (Read 6590565 times)
January 22, 2017, 10:31:44 PM
January 22, 2017, 10:17:48 PM
Need Help!!! I have z97 Gaming 5 Mobo (with 1300w PSU), Windows 8, Claymore 11 Beta with Crimson 17 latest driver.
I have 6x RX480 8GB GPUs (using Powered PCI raisers) in the Rig but only 5 recognized, but 6th errors out with following message in Windows Device Manager
Device Status:
Windows has stopped this device because it has reported problems. (Code 43)
And the 6th one never show up for mining.
NOTE: I did confirmed that GPU and Power raisers are works fine. Also tried swapping GPUs but no help.
I have tried almost all option on disabling unused hardware in CMOS. Started Rig one by one until 6 GPUs.
Still it does not recognize 6 GPUS. ONLY 5 works as of now.
Please help how to make the 6th one working.
I have 6x RX480 8GB GPUs (using Powered PCI raisers) in the Rig but only 5 recognized, but 6th errors out with following message in Windows Device Manager
Device Status:
Windows has stopped this device because it has reported problems. (Code 43)
And the 6th one never show up for mining.
NOTE: I did confirmed that GPU and Power raisers are works fine. Also tried swapping GPUs but no help.
I have tried almost all option on disabling unused hardware in CMOS. Started Rig one by one until 6 GPUs.
Still it does not recognize 6 GPUS. ONLY 5 works as of now.
Please help how to make the 6th one working.
Google it.
You get "error 43" usually because the miner is counting your onboard graphics as a GPU. So 5 gpus + onboard graphics = 6. You need to disable your onboard graphics. This usually resolves error code 43 problems.
January 22, 2017, 09:10:01 PM
Need Help!!! I have z97 Gaming 5 Mobo (with 1300w PSU), Windows 8, Claymore 11 Beta with Crimson 17 latest driver.
I have 6x RX480 8GB GPUs (using Powered PCI raisers) in the Rig but only 5 recognized, but 6th errors out with following message in Windows Device Manager
Device Status:
Windows has stopped this device because it has reported problems. (Code 43)
And the 6th one never show up for mining.
NOTE: I did confirmed that GPU and Power raisers are works fine. Also tried swapping GPUs but no help.
I have tried almost all option on disabling unused hardware in CMOS. Started Rig one by one until 6 GPUs.
Still it does not recognize 6 GPUS. ONLY 5 works as of now.
Please help how to make the 6th one working.
Better switch to win10 or try this mod:I have 6x RX480 8GB GPUs (using Powered PCI raisers) in the Rig but only 5 recognized, but 6th errors out with following message in Windows Device Manager
Device Status:
Windows has stopped this device because it has reported problems. (Code 43)
And the 6th one never show up for mining.
NOTE: I did confirmed that GPU and Power raisers are works fine. Also tried swapping GPUs but no help.
I have tried almost all option on disabling unused hardware in CMOS. Started Rig one by one until 6 GPUs.
Still it does not recognize 6 GPUS. ONLY 5 works as of now.
Please help how to make the 6th one working.
https://bitcointalksearch.org/topic/7xgpu-windows-modding-amd-video-driver-is-the-answer-712228
January 22, 2017, 07:59:13 PM
Need Help!!! I have z97 Gaming 5 Mobo (with 1300w PSU), Windows 8, Claymore 11 Beta with Crimson 17 latest driver.
I have 6x RX480 8GB GPUs (using Powered PCI raisers) in the Rig but only 5 recognized, but 6th errors out with following message in Windows Device Manager
Device Status:
Windows has stopped this device because it has reported problems. (Code 43)
And the 6th one never show up for mining.
NOTE: I did confirmed that GPU and Power raisers are works fine. Also tried swapping GPUs but no help.
I have tried almost all option on disabling unused hardware in CMOS. Started Rig one by one until 6 GPUs.
Still it does not recognize 6 GPUS. ONLY 5 works as of now.
Please help how to make the 6th one working.
I have 6x RX480 8GB GPUs (using Powered PCI raisers) in the Rig but only 5 recognized, but 6th errors out with following message in Windows Device Manager
Device Status:
Windows has stopped this device because it has reported problems. (Code 43)
And the 6th one never show up for mining.
NOTE: I did confirmed that GPU and Power raisers are works fine. Also tried swapping GPUs but no help.
I have tried almost all option on disabling unused hardware in CMOS. Started Rig one by one until 6 GPUs.
Still it does not recognize 6 GPUS. ONLY 5 works as of now.
Please help how to make the 6th one working.
January 22, 2017, 02:06:53 PM
470 runs around 26@120
480 runs around 29@135
Theoretically its possible to run 470 at 28, but it requires hardcore mem OC and not many cards can handle it 24/7.
my powercolor red dragon 470 4 GB single fan does a hair over 29 mhz on eth with the 1750 strap mod. 1200/2100 -75mv. 24/7 stable. no idea of the power draw at the wall though but gpuz says 85 watts for the chip only. it is undervolted and underclocked core wise.
need samsung memory is the main thing for the 470 29+ club.
January 22, 2017, 12:16:23 PM
I have a question for RX 470 and 480 users
What power consumption do you guys get with what hash rates?
What power consumption do you guys get with what hash rates?
Have you read the forum ? there is alot of post already referencing those numbers.
I read plenty of post about hash rates but power draw is not so consistent. Problem when searching these terms even with quotations is it only requires the words to appear anywhere on the page, even if one is in a post and the other is a related link.
470 runs around 26@120
480 runs around 29@135
Theoretically its possible to run 470 at 28, but it requires hardcore mem OC and not many cards can handle it 24/7.
January 21, 2017, 10:44:46 AM
friends today admin pool https://ethereum.miningpoolhub.com/ stole my 5.89832591 silent and not responding - what to do ?
also i noticed they tried to request a password reset on that pool and my ethereum is lost........... -.-To do a password reset, someone has access to your email password.
This usually happens when people use the same password all over the internet. When a site/company is compromised, the list of passwords is used to access other accounts that you may have on the web.
Don't use the same passwords and don't store coins in a pool!
I'll just give my bank pin to the guy that runs the local pub or, better yet, just skip the bank, I'll give him all my savings to keep behind the counter...
January 21, 2017, 09:34:57 AM
friends today admin pool https://ethereum.miningpoolhub.com/ stole my 5.89832591 silent and not responding - what to do ?
also i noticed they tried to request a password reset on that pool and my ethereum is lost........... -.- January 21, 2017, 05:15:49 AM
Hi there,
I have just started running five old AMD 7950 and I am getting the following stat's with Windows 10.
Do they look average / good ?
ETH - Total Speed: 62.777 Mh/s, Total Shares: 5, Rejected: 0, Time: 00:06
ETH: GPU0 12.053 Mh/s, GPU1 13.134 Mh/s, GPU2 12.771 Mh/s, GPU3 12.769 Mh/s, GPU 4 12.047 Mh/s
DCR - Total Speed: 941.656 Mh/s, Total Shares: 1, Rejected: 0 DCR: GPU0 180.792 Mh/s, GPU1 197.006 Mh/s, GPU2 191.570 Mh/s, GPU3 191.535 Mh/s , GPU4 180.709 Mh/s
I have just started running five old AMD 7950 and I am getting the following stat's with Windows 10.
Do they look average / good ?
ETH - Total Speed: 62.777 Mh/s, Total Shares: 5, Rejected: 0, Time: 00:06
ETH: GPU0 12.053 Mh/s, GPU1 13.134 Mh/s, GPU2 12.771 Mh/s, GPU3 12.769 Mh/s, GPU 4 12.047 Mh/s
DCR - Total Speed: 941.656 Mh/s, Total Shares: 1, Rejected: 0 DCR: GPU0 180.792 Mh/s, GPU1 197.006 Mh/s, GPU2 191.570 Mh/s, GPU3 191.535 Mh/s , GPU4 180.709 Mh/s
It's pointless to mine ETH with this GPU. Mine Zcash or EXP.
January 21, 2017, 03:52:09 AM
Hi there,
I have just started running five old AMD 7950 and I am getting the following stat's with Windows 10.
Do they look average / good ?
ETH - Total Speed: 62.777 Mh/s, Total Shares: 5, Rejected: 0, Time: 00:06
ETH: GPU0 12.053 Mh/s, GPU1 13.134 Mh/s, GPU2 12.771 Mh/s, GPU3 12.769 Mh/s, GPU 4 12.047 Mh/s
DCR - Total Speed: 941.656 Mh/s, Total Shares: 1, Rejected: 0 DCR: GPU0 180.792 Mh/s, GPU1 197.006 Mh/s, GPU2 191.570 Mh/s, GPU3 191.535 Mh/s , GPU4 180.709 Mh/s
I have just started running five old AMD 7950 and I am getting the following stat's with Windows 10.
Do they look average / good ?
ETH - Total Speed: 62.777 Mh/s, Total Shares: 5, Rejected: 0, Time: 00:06
ETH: GPU0 12.053 Mh/s, GPU1 13.134 Mh/s, GPU2 12.771 Mh/s, GPU3 12.769 Mh/s, GPU 4 12.047 Mh/s
DCR - Total Speed: 941.656 Mh/s, Total Shares: 1, Rejected: 0 DCR: GPU0 180.792 Mh/s, GPU1 197.006 Mh/s, GPU2 191.570 Mh/s, GPU3 191.535 Mh/s , GPU4 180.709 Mh/s
January 20, 2017, 07:20:38 PM
friends today admin pool https://ethereum.miningpoolhub.com/ stole my 5.89832591 silent and not responding - what to do ?
The admin hasn't stole your coins, dumass. He logs on the forum every day, he'll check it when he is not sleeping.
Don't spread FUD.
https://bitcointalksearch.org/topic/annpool-mining-pool-hub-multipool-multialgo-auto-exchange-to-any-coin-472510
MiningPoolHub has given out so much even when it's not his fault. 5 Eth is hardly anything; as to why you are storing it in a pool is another story (setup up auto withdraw).
January 20, 2017, 09:13:11 AM
friends today admin pool https://ethereum.miningpoolhub.com/ stole my 5.89832591 silent and not responding - what to do ?
January 19, 2017, 11:25:00 PM
I have a question for RX 470 and 480 users
What power consumption do you guys get with what hash rates?
What power consumption do you guys get with what hash rates?
Have you read the forum ? there is alot of post already referencing those numbers.
I read plenty of post about hash rates but power draw is not so consistent. Problem when searching these terms even with quotations is it only requires the words to appear anywhere on the page, even if one is in a post and the other is a related link.
January 19, 2017, 05:56:35 PM
Hi
Mined etc and siacoin with 6 rx 470 4gb better that mined only etc???
Mined etc and siacoin with 6 rx 470 4gb better that mined only etc???
January 19, 2017, 02:16:20 PM
I would ask if claymore is working on a more powerful miner for 1070 gtx. Interested ETH, ETC, and LBRY.
No. The 1070 isn't good at mining those coins. The architecture is wrong. Dagger Hashimoto isn't good for Nvidia. It's better for AMD cards.
January 19, 2017, 11:12:50 AM
any new update for ethereum miner @Claymore?
January 19, 2017, 09:02:52 AM
I would ask if claymore is working on a more powerful miner for 1070 gtx. Interested ETH, ETC, and LBRY.
January 16, 2017, 09:25:08 AM
do i need to do something to mine at die hard protocol (ETC)
January 16, 2017, 08:06:43 AM
just a simple line:
EthDcrMiner64.exe -epool etc-eu1.nanopool.org:19999 -ewal walletID
virtual memory shows me 49152, because on C:\ i set 32GB on other drive 16GB, tried also with fixed 16GB C:\ only, 32GB C:\ only, and some other settings.
EthDcrMiner64.exe -epool etc-eu1.nanopool.org:19999 -ewal walletID
virtual memory shows me 49152, because on C:\ i set 32GB on other drive 16GB, tried also with fixed 16GB C:\ only, 32GB C:\ only, and some other settings.
try to add this to your cmdline
-mode 1 -allcoins etc
if you don't, the miner try to mine ETH for the devfee, hence your error in DAG creation, if you force allcoin etc, only ETC dags will be created.
It doesn't work, you get the same DAG error, no matter if they are ETC.
Its O.K. atm, when we can mine Zcash, but what happens if ZEC is no longer profitable?
All 2GB cards go on Ebay? hehe
Have you saw my previous post ?
https://bitcointalksearch.org/topic/m.17513221
ETH and ETC got the same DAG size (didn't knew at the time i made the first reply), if you want to mine with 2GB gpu's, mine EXP (Expanse) same algo but DAG is alot smaller and should fit 2GB GPU's
so use an EXP pool with
Code:
-mode 1 -allcoins exp
for solo EXP mining and it should work. January 16, 2017, 07:29:27 AM
just a simple line:
EthDcrMiner64.exe -epool etc-eu1.nanopool.org:19999 -ewal walletID
virtual memory shows me 49152, because on C:\ i set 32GB on other drive 16GB, tried also with fixed 16GB C:\ only, 32GB C:\ only, and some other settings.
EthDcrMiner64.exe -epool etc-eu1.nanopool.org:19999 -ewal walletID
virtual memory shows me 49152, because on C:\ i set 32GB on other drive 16GB, tried also with fixed 16GB C:\ only, 32GB C:\ only, and some other settings.
try to add this to your cmdline
-mode 1 -allcoins etc
if you don't, the miner try to mine ETH for the devfee, hence your error in DAG creation, if you force allcoin etc, only ETC dags will be created.
It doesn't work, you get the same DAG error, no matter if they are ETC.
Its O.K. atm, when we can mine Zcash, but what happens if ZEC is no longer profitable?
All 2GB cards go on Ebay? hehe
Jump to: