Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1023. (Read 6590718 times)
February 01, 2017, 04:40:31 AM
Why my miner wont connect to eu1-etc.ethermine.org Huh help
February 01, 2017, 03:22:24 AM
hi there,
is there any alternative pool for DCR in dual mining? this http://yiimp.ccminer.org/ is crashing
this is the third time in the last 7 days....
is there any alternative pool for DCR in dual mining? this http://yiimp.ccminer.org/ is crashing
this is the third time in the last 7 days....
February 01, 2017, 02:41:04 AM
I dont mind a few % rejects, its realy a small amount.
The temperatures are the problem, i can get the RX series cards to 70 - 74 degrees, which is not that bad, but the 79xx series just goes 80+ hehe.
Can anyone tell me what the degrees are on 280x cards for istance? Im guessing they overheat to, since its basicly at 7970 repacked.
The temperatures are the problem, i can get the RX series cards to 70 - 74 degrees, which is not that bad, but the 79xx series just goes 80+ hehe.
Can anyone tell me what the degrees are on 280x cards for istance? Im guessing they overheat to, since its basicly at 7970 repacked.
Regarding those RX, set the core clocks to 1050, thank me tomorrow
Thanks for the tip, im trying it out.
So far, ETH drops from 24Mh/s to 20MH/s
Anyway, im geting bad results on SApphire Nitro+ RX 480 4GB
About 24MH/s ETH + 1.1Gh/s Decred is the best i can do at 1300/2000
Kinda sux, seeing people are geting 28Mh/s ETH on 470's.
Even if i tune down Decred to oblivion, ETH won't go past 24.5Mh/s
Noobs shouldn't mine hehe.
January 31, 2017, 11:53:43 PM
I dont mind a few % rejects, its realy a small amount.
The temperatures are the problem, i can get the RX series cards to 70 - 74 degrees, which is not that bad, but the 79xx series just goes 80+ hehe.
Can anyone tell me what the degrees are on 280x cards for istance? Im guessing they overheat to, since its basicly at 7970 repacked.
The temperatures are the problem, i can get the RX series cards to 70 - 74 degrees, which is not that bad, but the 79xx series just goes 80+ hehe.
Can anyone tell me what the degrees are on 280x cards for istance? Im guessing they overheat to, since its basicly at 7970 repacked.
Regarding those RX, set the core clocks to 1050, thank me tomorrow
January 31, 2017, 06:53:10 PM
Hi i got 6 elpida 4 hynix 1 samsung rx 470
Rig with 3 elpida 3 hynix ones is running great.
Rig 2 with 3 elpida 1 hynix 1 samsung..... one gpu gets a high load of rejected shares.... might it be some faulty gpu or what might be the reason for it? I use same afterburner settings for all of them on both rigs and only 1 gpu is having problems...
Rig with 3 elpida 3 hynix ones is running great.
Rig 2 with 3 elpida 1 hynix 1 samsung..... one gpu gets a high load of rejected shares.... might it be some faulty gpu or what might be the reason for it? I use same afterburner settings for all of them on both rigs and only 1 gpu is having problems...
January 31, 2017, 06:21:44 PM
Can anybody tell me what the best crimson driver version is to use for Windows 10 for a 6 gpu rig (Sapphire RX 470 8gb cards)? I think 16.11.5 beta is installed right now
Also what is the best mining pool to use with Claymore?
Also what is the best mining pool to use with Claymore?
January 31, 2017, 04:05:57 PM
Elpida memory gpu 1122 / mem 2020 core voltage -96mV . I got with samsung memory too. I will test them in few day...
At 2020 memclock, which timings do you use? From which strap - 1500, 1625, 1750?1500
January 31, 2017, 01:00:57 PM
Hello
How do the following commands work with claymore?
I would like that my card starts with the voltages following 950mv and the fans has 50% minimum, I therefore apologize these commands in the .bat
But it does not work.
-cvddc 950 -mvddc 900 -fanmin 50
an idea ?
thank you
How do the following commands work with claymore?
I would like that my card starts with the voltages following 950mv and the fans has 50% minimum, I therefore apologize these commands in the .bat
But it does not work.
-cvddc 950 -mvddc 900 -fanmin 50
an idea ?
thank you
January 31, 2017, 08:29:10 AM
I have a question for RX 470 and 480 users
What power consumption do you guys get with what hash rates?
What power consumption do you guys get with what hash rates?
Have you read the forum ? there is alot of post already referencing those numbers.
I read plenty of post about hash rates but power draw is not so consistent. Problem when searching these terms even with quotations is it only requires the words to appear anywhere on the page, even if one is in a post and the other is a related link.
470 runs around 26@120
480 runs around 29@135
Theoretically its possible to run 470 at 28, but it requires hardcore mem OC and not many cards can handle it 24/7.
Without any problem, withoutn crash. Sapphire RX470 4GB Nitro+ (moded bios)
ETH - Total Speed: 114.433 Mh/s, Total Shares: 5248, Rejected: 0, Time: 26:11
ETH: GPU0 28.610 Mh/s, GPU1 28.635 Mh/s, GPU2 28.577 Mh/s, GPU3 28.612 Mh/s
ETH: 01/30/17-22:19:46 - SHARE FOUND - (GPU 3)
ETH: Share accepted (78 ms)!
mind to share the bios and afterburner settings or whichever u use? and memory type... elpida? hynix? samsung?
January 31, 2017, 07:58:34 AM
Without any problem, withoutn crash. Sapphire RX470 4GB Nitro+ (moded bios)
That's probably Samsung memory you've got there? Those can usually overclock to 2100+ with 1750 strap timings. But most 470s, as far as I'm aware, don't use Samsung chips but rather Hynix (not bad as well) or Elpida (those are a bit worse I think?). my powercolor red dragon 470/4 will also do 28+. does 28.5-28.8 on eth with 1750 straps @ 1300/2100 -75mv -i 8. runs 24/7 with no problems. about a month ago it could hit the low 29s, guess the epoch increase slowed it down a touch.
seems to be a samsung thing?
January 31, 2017, 05:05:52 AM
Elpida memory gpu 1122 / mem 2020 core voltage -96mV . I got with samsung memory too. I will test them in few day...
At 2020 memclock, which timings do you use? From which strap - 1500, 1625, 1750? January 31, 2017, 03:20:50 AM
I get some rejects from Decred too, but nothing too bad.
Whats bad is the temps of the cards... Can't run it on 7950's as they go over 80 degrees
Any advice here? tried lowering the clocks to 800Mhz and memory to 1200 Mhz, lowered voltages but still geting too hot...
I switched to dcr.coinmine.pl now getting 0.00% rejects, across 29 cards. suprnova dcr pools seems crap I guess.Whats bad is the temps of the cards... Can't run it on 7950's as they go over 80 degrees
Any advice here? tried lowering the clocks to 800Mhz and memory to 1200 Mhz, lowered voltages but still geting too hot...
I dont mind a few % rejects, its realy a small amount.
The temperatures are the problem, i can get the RX series cards to 70 - 74 degrees, which is not that bad, but the 79xx series just goes 80+ hehe.
Can anyone tell me what the degrees are on 280x cards for istance? Im guessing they overheat to, since its basicly at 7970 repacked.
January 31, 2017, 02:02:28 AM
Without any problem, withoutn crash. Sapphire RX470 4GB Nitro+ (moded bios)
That's probably Samsung memory you've got there? Those can usually overclock to 2100+ with 1750 strap timings. But most 470s, as far as I'm aware, don't use Samsung chips but rather Hynix (not bad as well) or Elpida (those are a bit worse I think?). Elpida memory gpu 1122 / mem 2020 core voltage -96mV . I got with samsung memory too. I will test them in few day...
January 30, 2017, 11:15:33 PM
Why my miner wont connect to eu1-etc.ethermine.org 
help
help January 30, 2017, 04:43:23 PM
Without any problem, withoutn crash. Sapphire RX470 4GB Nitro+ (moded bios)
That's probably Samsung memory you've got there? Those can usually overclock to 2100+ with 1750 strap timings. But most 470s, as far as I'm aware, don't use Samsung chips but rather Hynix (not bad as well) or Elpida (those are a bit worse I think?). January 30, 2017, 04:21:30 PM
I have a question for RX 470 and 480 users
What power consumption do you guys get with what hash rates?
What power consumption do you guys get with what hash rates?
Have you read the forum ? there is alot of post already referencing those numbers.
I read plenty of post about hash rates but power draw is not so consistent. Problem when searching these terms even with quotations is it only requires the words to appear anywhere on the page, even if one is in a post and the other is a related link.
470 runs around 26@120
480 runs around 29@135
Theoretically its possible to run 470 at 28, but it requires hardcore mem OC and not many cards can handle it 24/7.
Without any problem, withoutn crash. Sapphire RX470 4GB Nitro+ (moded bios)
ETH - Total Speed: 114.433 Mh/s, Total Shares: 5248, Rejected: 0, Time: 26:11
ETH: GPU0 28.610 Mh/s, GPU1 28.635 Mh/s, GPU2 28.577 Mh/s, GPU3 28.612 Mh/s
ETH: 01/30/17-22:19:46 - SHARE FOUND - (GPU 3)
ETH: Share accepted (78 ms)!
January 30, 2017, 03:01:50 PM
@Claymore
Will there be an update for this or response to this? Thanks.
You all need to add Claymore as a 3rd party ETH miner option, it works fine and doesn't have all these driver issues you're having with the ETH Miner and SGMiner.
It is not up to us.
Ask Claymore to modify his miner so it will fit the NiceHash Miner.
Will there be an update for this or response to this? Thanks.
NiceHash Miner v1.7.4.3
Download:
https://www.nicehash.com/?p=nhmintro
This is a minor bug-fix release and minor feature updates.
Download:
https://www.nicehash.com/?p=nhmintro
This is a minor bug-fix release and minor feature updates.
You all need to add Claymore as a 3rd party ETH miner option, it works fine and doesn't have all these driver issues you're having with the ETH Miner and SGMiner.
It is not up to us.
Ask Claymore to modify his miner so it will fit the NiceHash Miner.
January 30, 2017, 01:16:23 PM
I get some rejects from Decred too, but nothing too bad.
Whats bad is the temps of the cards... Can't run it on 7950's as they go over 80 degrees
Any advice here? tried lowering the clocks to 800Mhz and memory to 1200 Mhz, lowered voltages but still geting too hot...
I switched to dcr.coinmine.pl now getting 0.00% rejects, across 29 cards. suprnova dcr pools seems crap I guess. Whats bad is the temps of the cards... Can't run it on 7950's as they go over 80 degrees
Any advice here? tried lowering the clocks to 800Mhz and memory to 1200 Mhz, lowered voltages but still geting too hot...
January 30, 2017, 01:03:52 PM
I get some rejects from Decred too, but nothing too bad.
Whats bad is the temps of the cards... Can't run it on 7950's as they go over 80 degrees
Any advice here? tried lowering the clocks to 800Mhz and memory to 1200 Mhz, lowered voltages but still geting too hot...
Whats bad is the temps of the cards... Can't run it on 7950's as they go over 80 degrees
Any advice here? tried lowering the clocks to 800Mhz and memory to 1200 Mhz, lowered voltages but still geting too hot...
January 30, 2017, 12:47:35 PM
Having extremely high rejects on DCR Suprnova. Like 99%, usually gets better after a bit, but getting worse. If it gets better, it goes to ~1% rejects until I restart miner. Anyone else having terrible issues? Happens on most rigs. Cards are 100% stable, never crash, Eth rejects are rare.
Jump to: