Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1036. (Read 6590718 times)

Thanks, I'll switch to Zcash than

It did, but DAG is now too big and can't fit in your 2GB memory.
I have the same problem on my r9 270 cards.

but it was working without any issues for months

im getting error -48 cannot create dag on gpu

its my first build over 4 cards and it just wont work windows 10 i have triied increasing virtual memory plz help

Yup, that is why i'm asking

Probably 2GB, that is the problem.

How much ram does your GPU have?

I did it but still nothing

Increase virtual memory

any solution for this 

Yup, he mentioned in a different thread that he is working on an update for it.

hello my friend i have a 3 rx 480 amd card on mi pc and i having this overclocking problmes, i dont have any idea to stoped.







EthDcrMiner64.exe -epool us1.ethermine.or
g:4444 -ewal 0x817b2A436f6A6bC594735CA966f8d65303edf3371bC -epsw x -allpools 1 -tt
-90 -ttdcr 79

╔════════════════════════════════════════════════════════════════╗
║        Claymore's Dual ETH + DCR/SC/LBC GPU Miner v7.1         ║
╚════════════════════════════════════════════════════════════════╝

ETH: 1 pool is specified
Main Ethereum pool is us1.ethermine.org:4444
DCR: 0 pool is specified

Catalyst 15.12 is REQUIRED for best performance and compatibility
At least 16 GB of Virtual Memory is required for multi-GPU systems
Make sure you defined GPU_MAX_ALLOC_PERCENT 100
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards
OpenCL initializing...

AMD Cards available: 3
GPU #0: Ellesmere, 8192 MB available, 36 compute units
GPU #0 recognized as Radeon RX 480
GPU #1: Ellesmere, 8192 MB available, 36 compute units
GPU #1 recognized as Radeon RX 480
GPU #2: Ellesmere, 8192 MB available, 36 compute units
GPU #2 recognized as Radeon RX 480
POOL/SOLO version
GPU #0: set -etha as 0 (ETH algo for fast cards)
GPU #1: set -etha as 0 (ETH algo for fast cards)
GPU #2: set -etha as 0 (ETH algo for fast cards)
No NVIDIA CUDA GPUs detected.
Total cards: 3
ETH: Stratum - connecting to 'us1.ethermine.org' <149.56.26.221> port 4444
No pool specified for Decred! Ethereum-only mining mode is enabled
ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
ETH: eth-proxy stratum mode
"-allpools" option is set, default pools can be used for devfee, check "Readme"
file for details.
Watchdog enabled
Remote management is enabled on port 3333

ETH: Stratum - Connected (us1.ethermine.org:4444)
ETH: Authorized
Setting DAG epoch #95...
Setting DAG epoch #95 for GPU #2
Setting DAG epoch #95 for GPU #1
Create GPU buffer for GPU #1
Setting DAG epoch #95 for GPU #0
Create GPU buffer for GPU #2
Create GPU buffer for GPU #0
ETH: 12/25/16-12:15:00 - New job from us1.ethermine.org:4444
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s
GPU 2 DAG creation time - 3332 ms
Setting DAG epoch #95 for GPU #2 done
GPU 0 DAG creation time - 3325 ms
Setting DAG epoch #95 for GPU #0 done
GPU 1 DAG creation time - 4349 ms
Setting DAG epoch #95 for GPU #1 done
ETH: 12/25/16-12:15:25 - New job from us1.ethermine.org:4444
ETH - Total Speed: 82.283 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 28.123 Mh/s, GPU1 24.796 Mh/s, GPU2 29.364 Mh/s
GPU0 t=63C fan=91%, GPU1 t=62C fan=90%, GPU2 t=62C fan=93%
ETH: 12/25/16-12:15:27 - New job from us1.ethermine.org:4444
ETH - Total Speed: 82.145 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 28.044 Mh/s, GPU1 24.736 Mh/s, GPU2 29.365 Mh/s
ETH: 12/25/16-12:15:47 - New job from us1.ethermine.org:4444
ETH - Total Speed: 81.808 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 27.828 Mh/s, GPU1 24.801 Mh/s, GPU2 29.179 Mh/s
GPU0 t=63C fan=91%, GPU1 t=61C fan=90%, GPU2 t=62C fan=93%
ETH: 12/25/16-12:15:57 - New job from us1.ethermine.org:4444
ETH - Total Speed: 81.854 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:01
ETH: GPU0 27.698 Mh/s, GPU1 24.795 Mh/s, GPU2 29.362 Mh/s
ETH: 12/25/16-12:16:01 - New job from us1.ethermine.org:4444
ETH - Total Speed: 81.752 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:01
ETH: GPU0 27.617 Mh/s, GPU1 24.784 Mh/s, GPU2 29.351 Mh/s
GPU #0 got incorrect share. If you see this warning often, make sure you did not
 overclock it too much!

new data for the R9 380 and the configuration of et - Total rate: 70.124 MZ/s, the Total number of shares: 42 rejected: 0, Time: 00:10
et: 23.414 MZ GPU0/GPU1 23.421 MZ/MZ GPU2 23.289/s
ACS - General speed: 1051.855 MZ/s, the Total number of shares: 11 rejected: 0
PKT: GPU0 351.212 MZ/MZ 351.308 GPU1/GPU2 349.335 MH/s
GPU 1100
1650 memory

Guys,
My R9 FURY speed about 28Mh (1040/500),
R9 290 ref about 30Mh (1040/1250),
290 faster than fury. Is it normal

Guys - what is the hash rate with R9 Fury?

It should be around 14 mh, the dag file causes the card to hash slower and slower.

rx 470/480 & r9 290/390 are unaffected by the dag.

Is there a version upgrade in the near future?

Security: People were hacking the remote manager so now it's set to read only by default.

I still use the 4.7. No need to upgrade.

I am on version 6 claymore miner, is there any reason to upgrade to 7.4?