Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1038.

hpitcher

member

Activity: 119

Merit: 10

Hello, I'm new to ether mining and I have 2 msi rx470gb cards and they hash but for some reason I cannot see the temp of the second gpu in claymore I see this
ETH - Total Speed: 41.433 Mh/s, Total Shares: 102, Rejected: 0, Time: 03:10
ETH: GPU0 20.715 Mh/s, GPU1 20.717 Mh/s
GPU0 t=67C fan=39%
How do I get the second gpu to show the temp windows 10 and crossfire setting is turned off am I missing something in the config file? any ideas thanks. oh and I'm using whql-win10-64bit-radeon-software-crimson-16.9.1-sep13.exe for gpu drives

Slydrule

full member

Activity: 185

Merit: 100

Quote from: QuintLeo on December 18, 2016, 06:58:35 PM

Quote from: batko on December 17, 2016, 12:21:44 PM

Quote from: big_daddy on December 16, 2016, 07:55:44 AM

I have a problem running the v7.4

this is my .bat file setup ->>>

EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal ethWallet.workerName -epsw x -dpool stratum+tcp://yiimp.ccminer.org:4252 -dwal decredWallet -dpsw x -tt -100

i'm getting 0 Mh/s on ETH & 0 also on Decred, I can not even connect to rhe stratum decred server

I have a PC with 2X R9 380

I also tryed with this->>

EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal ethWallet.workerName -epsw x -dpool stratum+tcp://dcr.suprnova.cc:2252 -dwal decredWallet -dpsw x -tt -100

Please help

I have same problem with 380 2GB model

DAG file size for ETH has grown to the point that most 2GB cards CAN'T LOAD THE DAG FILE - which means they can't mine ETH any longer.

Try pointing them at ETC instead, or look for coins that use a different algorythm.

I am only having a problem with Claymore's miner. I can mine with sgminer-gm and qt-miner using my R9 270s (2gb).

big_daddy

hero member

Activity: 1680

Merit: 583

xUSD - The PRIVATE stable coin - Haven Protocol

Quote from: QuintLeo on December 18, 2016, 06:58:35 PM

Quote from: batko on December 17, 2016, 12:21:44 PM

Quote from: big_daddy on December 16, 2016, 07:55:44 AM

I have a problem running the v7.4

this is my .bat file setup ->>>

EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal ethWallet.workerName -epsw x -dpool stratum+tcp://yiimp.ccminer.org:4252 -dwal decredWallet -dpsw x -tt -100

i'm getting 0 Mh/s on ETH & 0 also on Decred, I can not even connect to rhe stratum decred server

I have a PC with 2X R9 380

I also tryed with this->>

EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal ethWallet.workerName -epsw x -dpool stratum+tcp://dcr.suprnova.cc:2252 -dwal decredWallet -dpsw x -tt -100

Please help

I have same problem with 380 2GB model

DAG file size for ETH has grown to the point that most 2GB cards CAN'T LOAD THE DAG FILE - which means they can't mine ETH any longer.

Try pointing them at ETC instead, or look for coins that use a different algorythm.

I have the R9 380 4 GB card, it works with the older Claymore version, but also cannot run dula miner, ETH+Decred, bu I still would like to run the v7.4

QuintLeo

legendary

Activity: 1498

Merit: 1030

Quote from: FFI2013 on December 14, 2016, 08:09:26 PM

I have all older r9 cards that I have mining zec but I want to also mine eth so Im going to get new rx cards how much of a difference between 470 and 480 4gb or 8gb thanks

The real difference is the memory speed - most (all?) of the 8GB cards use 8000 Mhz RAM, all of the 4GB cards use 6600 or 7000 Mhz.

ETH is very strongly memory limited, so hashrates tend to be very close to directly proportional to memory speed if all else is equal (BIOS mods can make things somewhat unequal).

QuintLeo

legendary

Activity: 1498

Merit: 1030

Quote from: batko on December 17, 2016, 12:21:44 PM

Quote from: big_daddy on December 16, 2016, 07:55:44 AM

I have a problem running the v7.4

this is my .bat file setup ->>>

EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal ethWallet.workerName -epsw x -dpool stratum+tcp://yiimp.ccminer.org:4252 -dwal decredWallet -dpsw x -tt -100

i'm getting 0 Mh/s on ETH & 0 also on Decred, I can not even connect to rhe stratum decred server

I have a PC with 2X R9 380

I also tryed with this->>

EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal ethWallet.workerName -epsw x -dpool stratum+tcp://dcr.suprnova.cc:2252 -dwal decredWallet -dpsw x -tt -100

Please help

I have same problem with 380 2GB model

DAG file size for ETH has grown to the point that most 2GB cards CAN'T LOAD THE DAG FILE - which means they can't mine ETH any longer.

Try pointing them at ETC instead, or look for coins that use a different algorythm.

bolt1909

member

Activity: 65

Merit: 10

Quote from: molitar on December 17, 2016, 03:41:02 PM

I need help the miner keeps stalling at devfee and at start. I have to press enter to get it to continue.

Windows 10
Page file set to 32-48 MB on an SSD card

Start up
EthDcrMiner64.exe -epool coinotron.com:3344 -ewal molitar.miner2 -esm 2 -epsw -dpool "http://sia-eu1.nanopool.org:9980/miner/header?address=

&worker=miner2&email=<[email protected]>" -dcoin sia -allpools -1 -ethi 16 -r 0 -gser 1 -powlim -1

OpenCL initializing...

AMD Cards available: 6
GPU #0: Ellesmere, 8192 MB available, 36 compute units
GPU #0 recognized as Radeon RX 480
GPU #1: Ellesmere, 8192 MB available, 36 compute units
GPU #1 recognized as Radeon RX 480
GPU #2: Ellesmere, 8192 MB available, 36 compute units
GPU #2 recognized as Radeon RX 480
GPU #3: Ellesmere, 8192 MB available, 36 compute units
GPU #3 recognized as Radeon RX 480
GPU #4: Ellesmere, 8192 MB available, 36 compute units
GPU #4 recognized as Radeon RX 480
GPU #5: Ellesmere, 8192 MB available, 36 compute units
GPU #5 recognized as Radeon RX 480
POOL/SOLO version

If I press here it will continue to mine until Devfee switch.

-allpools -1 Huh

-allpools 1 is correct command "Note that if devfee mining pools will stop, entire mining will be stopped too."

molitar

sr. member

Activity: 322

Merit: 250

I need help the miner keeps stalling at devfee and at start. I have to press enter to get it to continue.

Windows 10
Page file set to 32-48 MB on an SSD card

Start up
EthDcrMiner64.exe -epool coinotron.com:3344 -ewal molitar.miner2 -esm 2 -epsw -dpool "http://sia-eu1.nanopool.org:9980/miner/header?address=

&worker=miner2&email=<[email protected]>" -dcoin sia -allpools -1 -ethi 16 -r 0 -gser 1 -powlim -1

OpenCL initializing...

AMD Cards available: 6
GPU #0: Ellesmere, 8192 MB available, 36 compute units
GPU #0 recognized as Radeon RX 480
GPU #1: Ellesmere, 8192 MB available, 36 compute units
GPU #1 recognized as Radeon RX 480
GPU #2: Ellesmere, 8192 MB available, 36 compute units
GPU #2 recognized as Radeon RX 480
GPU #3: Ellesmere, 8192 MB available, 36 compute units
GPU #3 recognized as Radeon RX 480
GPU #4: Ellesmere, 8192 MB available, 36 compute units
GPU #4 recognized as Radeon RX 480
GPU #5: Ellesmere, 8192 MB available, 36 compute units
GPU #5 recognized as Radeon RX 480
POOL/SOLO version

If I press here it will continue to mine until Devfee switch.

batko

full member

Activity: 169

Merit: 100

Quote from: big_daddy on December 16, 2016, 07:55:44 AM

I have a problem running the v7.4

this is my .bat file setup ->>>

EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal ethWallet.workerName -epsw x -dpool stratum+tcp://yiimp.ccminer.org:4252 -dwal decredWallet -dpsw x -tt -100

i'm getting 0 Mh/s on ETH & 0 also on Decred, I can not even connect to rhe stratum decred server

I have a PC with 2X R9 380

I also tryed with this->>

EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal ethWallet.workerName -epsw x -dpool stratum+tcp://dcr.suprnova.cc:2252 -dwal decredWallet -dpsw x -tt -100

Please help

I have same problem with 380 2GB model

vandres

member

Activity: 158

Merit: 12

UniFox

Is it there a way to use the remote monitor from a wan connection?

Gambler8899

newbie

Activity: 38

Merit: 0

Is there any faster miner than claymores for amd?
Which coin do you mine beside eth?

almirfiorio

sr. member

Activity: 312

Merit: 250

This picture is not my
But im have same error

Quote from: matmator on December 17, 2016, 08:11:06 AM

Quote from: almirfiorio on December 17, 2016, 08:06:36 AM

Im only have one

Quote from: vapourminer on December 17, 2016, 08:01:20 AM

Quote from: almirfiorio on December 17, 2016, 07:56:18 AM

Im not use overclock

And um running version 7.4

And problem continue

pull one card.

any better?

We see 4 cards on the screen, Roll Eyes

what is gpu? Driver version?

matmator

sr. member

Activity: 487

Merit: 252

bou !

Quote from: almirfiorio on December 17, 2016, 08:06:36 AM

Im only have one

Quote from: vapourminer on December 17, 2016, 08:01:20 AM

Quote from: almirfiorio on December 17, 2016, 07:56:18 AM

Im not use overclock

And um running version 7.4

And problem continue

pull one card.

any better?

We see 4 cards on the screen, Roll Eyes

what is gpu? Driver version?

vapourminer

legendary

Activity: 4354

Merit: 3614

what is this "brake pedal" you speak of?

Quote from: almirfiorio on December 17, 2016, 08:06:36 AM

Im only have one

pic shows 4 gpus and ver 7.2

post complete rig specs

almirfiorio

sr. member

Activity: 312

Merit: 250

Im only have one

Quote from: vapourminer on December 17, 2016, 08:01:20 AM

Quote from: almirfiorio on December 17, 2016, 07:56:18 AM

Im not use overclock

And um running version 7.4

And problem continue

pull one card.

any better?

vapourminer

legendary

Activity: 4354

Merit: 3614

what is this "brake pedal" you speak of?

Quote from: almirfiorio on December 17, 2016, 07:56:18 AM

Im not use overclock

And um running version 7.4

And problem continue

pull one card.

any better?

almirfiorio

sr. member

Activity: 312

Merit: 250

Im not use overclock

And um running version 7.4

And problem continue

Quote from: vapourminer on December 17, 2016, 07:52:35 AM

[quotelink=topic=1433925.msg17211751#msg17211751 date=1481979000]
use 7.4 Wink

yeah that could help too Wink

[/quote]

vapourminer

legendary

Activity: 4354

Merit: 3614

what is this "brake pedal" you speak of?

Quote from: matmator on December 17, 2016, 07:50:00 AM

use 7.4

yeah that could help too Wink

matmator

sr. member

Activity: 487

Merit: 252

bou !

use 7.4

vapourminer

legendary

Activity: 4354

Merit: 3614

what is this "brake pedal" you speak of?

Quote from: almirfiorio on December 17, 2016, 07:29:33 AM

When im started claymores im receive the message

How im can solv this ?

https://s24.postimg.org/5c07mernp/Zgki_Hg_YL6_KNeqt87_NOn8j_Nl_H_Eb_Fbref_Ug6_Boc_CEG5_If_DUe.jpg

make sure your computer and cards are running stock (no overclock, no undervolt, no modded stuff). have current chipset drivers for motherboard. update OS. set 16 gigs virtual memory

what power supply do you have? what other specs? like video card driver version, ram, mobo etc

almirfiorio

sr. member

Activity: 312

Merit: 250

Dear Friends

When im started claymores im receive the message

How im can solv this ?

Thanks
Almir

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1038. (Read 6590718 times)