Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1042. (Read 6590718 times)
December 10, 2016, 12:15:09 AM
It would be nice if you add in EthMan the conclusion of the course, the coins and the approximate profit from it for each gpu rig, kind of how it is done in awesomeminer.
December 09, 2016, 09:17:45 PM
how im can do that ?
Would be nice if you will add ability to use environment variables in "epools.txt" and "config.txt" files, like in zcash miner.
December 09, 2016, 07:58:52 PM
Is it possible to mine 2 coins in minergate?
December 09, 2016, 06:52:08 PM
30MH rom for Saphire RX470 4GB Elpida
https://bitcointalksearch.org/topic/29mh-rom-for-saphire-rx470-4gb-nitro-oc-elpida-1710085
December 09, 2016, 06:23:36 PM
How about benchmarking option and possibly other things that may lead Claymore Ethereum miner being implemented into nicehash miner similar as Claymores Zcash miner?
December 09, 2016, 05:00:12 PM
Hey Claymore,
Would be nice to have the ability to protect the admin port for the remote console of claymore by adding maybe "-mkey yourpassword" ? and/or able to make the remote console listen on different port in different mode (-mport 3333 -4444) so that you could expose monitoring on the internet for remote administration/monitoring purpose. I know both request it would require you to change also the code for ethman, but it would be a great feature
keep up the good work
cheers.
Would be nice to have the ability to protect the admin port for the remote console of claymore by adding maybe "-mkey yourpassword" ? and/or able to make the remote console listen on different port in different mode (-mport 3333 -4444) so that you could expose monitoring on the internet for remote administration/monitoring purpose. I know both request it would require you to change also the code for ethman, but it would be a great feature
keep up the good work
cheers.
thats actually a great suggestion.
December 09, 2016, 04:31:36 PM
Hey Claymore,
Would be nice to have the ability to protect the admin port for the remote console of claymore by adding maybe "-mkey yourpassword" ? and/or able to make the remote console listen on different port in different mode (-mport 3333 -4444) so that you could expose monitoring on the internet for remote administration/monitoring purpose. I know both request it would require you to change also the code for ethman, but it would be a great feature
keep up the good work
cheers.
Would be nice to have the ability to protect the admin port for the remote console of claymore by adding maybe "-mkey yourpassword" ? and/or able to make the remote console listen on different port in different mode (-mport 3333 -4444) so that you could expose monitoring on the internet for remote administration/monitoring purpose. I know both request it would require you to change also the code for ethman, but it would be a great feature
keep up the good work
cheers.
December 09, 2016, 01:14:49 PM
Would be nice if you will add ability to use environment variables in "epools.txt" and "config.txt" files, like in zcash miner.
Ok I will release an update soon.
December 09, 2016, 01:12:38 PM
Would be nice if you will add ability to use environment variables in "epools.txt" and "config.txt" files, like in zcash miner.
December 09, 2016, 09:16:24 AM
my drivers are corect ?:
remove only "-ethi 16" ?
then the line is
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0x4FAd3e68CEc96AfbB0457B17A46fF6896EB57E40.worker1 -epsw x -etha 0 -esm 1
Is it not a problem with windows 10?
because the drivers have many problems
Thanks
Almir
remove only "-ethi 16" ?
then the line is
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0x4FAd3e68CEc96AfbB0457B17A46fF6896EB57E40.worker1 -epsw x -etha 0 -esm 1
Is it not a problem with windows 10?
because the drivers have many problems
Thanks
Almir
Yes use the recommended drivers i don't use AMD rig, but i presume it's mandatory
also remove -ethi 16 and let the default be, you are doubling the default intensity, it's probably why it's not going good. so remove -ethi completly and let it default for now. you probably want to test this before even changing the drivers.
Cheers
also remove -ethi 16 and let the default be, you are doubling the default intensity, it's probably why it's not going good. so remove -ethi completly and let it default for now. you probably want to test this before even changing the drivers.
Cheers
Does it run better without the -ethi 16 ?
December 09, 2016, 05:40:42 AM
my drivers are corect ?:
remove only "-ethi 16" ?
then the line is
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0x4FAd3e68CEc96AfbB0457B17A46fF6896EB57E40.worker1 -epsw x -etha 0 -esm 1
Is it not a problem with windows 10?
because the drivers have many problems
Thanks
Almir
remove only "-ethi 16" ?
then the line is
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0x4FAd3e68CEc96AfbB0457B17A46fF6896EB57E40.worker1 -epsw x -etha 0 -esm 1
Is it not a problem with windows 10?
because the drivers have many problems
Thanks
Almir
Yes use the recommended drivers i don't use AMD rig, but i presume it's mandatory
also remove -ethi 16 and let the default be, you are doubling the default intensity, it's probably why it's not going good. so remove -ethi completly and let it default for now. you probably want to test this before even changing the drivers.
Cheers
also remove -ethi 16 and let the default be, you are doubling the default intensity, it's probably why it's not going good. so remove -ethi completly and let it default for now. you probably want to test this before even changing the drivers.
Cheers
December 09, 2016, 05:37:04 AM
Yes use the recommended drivers i don't use AMD rig, but i presume it's mandatory
also remove -ethi 16 and let the default be, you are doubling the default intensity, it's probably why it's not going good. so remove -ethi completly and let it default for now. you probably want to test this before even changing the drivers.
Cheers
also remove -ethi 16 and let the default be, you are doubling the default intensity, it's probably why it's not going good. so remove -ethi completly and let it default for now. you probably want to test this before even changing the drivers.
Cheers
December 09, 2016, 05:20:34 AM
Friend
This is my line of claymore version 5.3 beta
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0x4FAd3e68CEc96AfbB0457B17A46fF6896EB57E40.worker1 -epsw x -ethi 16 -etha 0 -esm 1
in bios my am3 is auto clock
im dont have catalyst
im have instaled the crimsom 16.11.4 beta
im need to change?
Thanks
Almir
no gpu is not overheating, thew teperature of gpu is only 34o
in the sapphire trixx the clock is 1250x1716 (default)
see the picture https://s29.postimg.org/kxpxtuyx3/trix_JPG.jpg
this bellow is the last lines and the line presentes in log
21:57:51:449 97c Setting DAG epoch #92...
21:57:53:574 13f0 Unsupported Overdrive version 7
21:57:53:574 13f0 Unsupported Overdrive version 7
21:57:53:699 38c Setting DAG epoch #92 for GPU #0
21:57:53:699 38c Create GPU buffer for GPU #0
21:57:53:699 97c Setting DAG epoch #92 for GPU #1
21:57:53:714 97c Create GPU buffer for GPU #1
21:57:56:606 13f0 Unsupported Overdrive version 7
21:57:56:606 13f0 Unsupported Overdrive version 7
Show less
Are you using the recommended catalyst 15.12 ? Because overdrive is AMD auto-clock / fan management so if claymore use the one present on your system it may be too old or too recent to be claymore compatible.
what command do you use to launch claymore ? Any gpu oc or temp managment in the cmdline ?
You should try to completely replace current PSU with the spare one you tested before to check if main PSU isn't in trouble
Try also with only 1x GPU to see if the stability is better
This is my line of claymore version 5.3 beta
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0x4FAd3e68CEc96AfbB0457B17A46fF6896EB57E40.worker1 -epsw x -ethi 16 -etha 0 -esm 1
in bios my am3 is auto clock
im dont have catalyst
im have instaled the crimsom 16.11.4 beta
im need to change?
Thanks
Almir
no gpu is not overheating, thew teperature of gpu is only 34o
in the sapphire trixx the clock is 1250x1716 (default)
see the picture https://s29.postimg.org/kxpxtuyx3/trix_JPG.jpg
this bellow is the last lines and the line presentes in log
21:57:51:449 97c Setting DAG epoch #92...
21:57:53:574 13f0 Unsupported Overdrive version 7
21:57:53:574 13f0 Unsupported Overdrive version 7
21:57:53:699 38c Setting DAG epoch #92 for GPU #0
21:57:53:699 38c Create GPU buffer for GPU #0
21:57:53:699 97c Setting DAG epoch #92 for GPU #1
21:57:53:714 97c Create GPU buffer for GPU #1
21:57:56:606 13f0 Unsupported Overdrive version 7
21:57:56:606 13f0 Unsupported Overdrive version 7
Show less
Are you using the recommended catalyst 15.12 ? Because overdrive is AMD auto-clock / fan management so if claymore use the one present on your system it may be too old or too recent to be claymore compatible.
what command do you use to launch claymore ? Any gpu oc or temp managment in the cmdline ?
You should try to completely replace current PSU with the spare one you tested before to check if main PSU isn't in trouble
Try also with only 1x GPU to see if the stability is better
December 09, 2016, 01:18:01 AM
no gpu is not overheating, thew teperature of gpu is only 34o
in the sapphire trixx the clock is 1250x1716 (default)
see the picture https://s29.postimg.org/kxpxtuyx3/trix_JPG.jpg
this bellow is the last lines and the line presentes in log
21:57:51:449 97c Setting DAG epoch #92...
21:57:53:574 13f0 Unsupported Overdrive version 7
21:57:53:574 13f0 Unsupported Overdrive version 7
21:57:53:699 38c Setting DAG epoch #92 for GPU #0
21:57:53:699 38c Create GPU buffer for GPU #0
21:57:53:699 97c Setting DAG epoch #92 for GPU #1
21:57:53:714 97c Create GPU buffer for GPU #1
21:57:56:606 13f0 Unsupported Overdrive version 7
21:57:56:606 13f0 Unsupported Overdrive version 7
Show less
This is your PSU? http://www.corsair.com/en/cx500-80-plus-bronze-certified-power-supply-na-refurbished
My advice: try with a different PSU, but choose one with some more Amps on the +12V rail, like this: http://www.corsair.com/en/ax860i-digital-atx-power-supply-860-watt-80-plus-platinum-certified-fully-modular-psu-eu
See if you have the same issue.
Good luck
My advice: try with a different PSU, but choose one with some more Amps on the +12V rail, like this: http://www.corsair.com/en/ax860i-digital-atx-power-supply-860-watt-80-plus-platinum-certified-fully-modular-psu-eu
See if you have the same issue.
Good luck
Are you using the recommended catalyst 15.12 ? Because overdrive is AMD auto-clock / fan management so if claymore use the one present on your system it may be too old or too recent to be claymore compatible.
what command do you use to launch claymore ? Any gpu oc or temp managment in the cmdline ?
You should try to completely replace current PSU with the spare one you tested before to check if main PSU isn't in trouble
Try also with only 1x GPU to see if the stability is better
December 08, 2016, 10:33:01 PM
I'm having an issue with port 4444, it does not matter what I do it will not connect to port 4444, easy enough , change to port 14444, it works but as soon as the Dev Fees kick in they will try US1.ethermine.org:4444, they will fail to connect and restart Claymore all over again.
Is there any ways to change that? Could I have the Dev Fees go to another pool, on the smaller CPUs it does it, goes to ethpool or the other one, its driving me crazy.
I guess The rig looses some 30 min per day doing that.
Thanks
Is there any ways to change that? Could I have the Dev Fees go to another pool, on the smaller CPUs it does it, goes to ethpool or the other one, its driving me crazy.
I guess The rig looses some 30 min per day doing that.
Thanks
Well I did figure it out, the one having a problem with the Port 4444 is my internet provider, did try with another service and go figures it works just fine.
Will have to talk to those guys
December 08, 2016, 09:14:42 PM
no gpu is not overheating, thew teperature of gpu is only 34o
in the sapphire trixx the clock is 1250x1716 (default)
see the picture https://s29.postimg.org/kxpxtuyx3/trix_JPG.jpg
this bellow is the last lines and the line presentes in log
21:57:51:449 97c Setting DAG epoch #92...
21:57:53:574 13f0 Unsupported Overdrive version 7
21:57:53:574 13f0 Unsupported Overdrive version 7
21:57:53:699 38c Setting DAG epoch #92 for GPU #0
21:57:53:699 38c Create GPU buffer for GPU #0
21:57:53:699 97c Setting DAG epoch #92 for GPU #1
21:57:53:714 97c Create GPU buffer for GPU #1
21:57:56:606 13f0 Unsupported Overdrive version 7
21:57:56:606 13f0 Unsupported Overdrive version 7
Show less
This is your PSU? http://www.corsair.com/en/cx500-80-plus-bronze-certified-power-supply-na-refurbished
My advice: try with a different PSU, but choose one with some more Amps on the +12V rail, like this: http://www.corsair.com/en/ax860i-digital-atx-power-supply-860-watt-80-plus-platinum-certified-fully-modular-psu-eu
See if you have the same issue.
Good luck
My advice: try with a different PSU, but choose one with some more Amps on the +12V rail, like this: http://www.corsair.com/en/ax860i-digital-atx-power-supply-860-watt-80-plus-platinum-certified-fully-modular-psu-eu
See if you have the same issue.
Good luck
December 08, 2016, 08:47:39 PM
Dear Friend
Can not be the PSU. I have here a second pcu in my house.
And I PUT up a second PSU and plugged.
im put only the 2nd video card in this 2nd PSU.
The pc normally connected and recognized the two video cards
And when starting the claymore's the pc shutdown again
Thanks
Almir
The load start as soon as you start Claymore, find a bigger PSU and try it.
It consumes ~150W at peaks, google it and you will see. Do you have something else that consumes power? HDD? External HDD? CD ROM? Fans? etc....
Do you have a link for your PSU so I can see it?
A good PSU which I recommend for a rig with 6 x Rx
http://www.corsair.com/en/ax1200i-digital-atx-power-supply-1200-watt-80-plus-platinum-certified-fully-modular-psu-eu
Dear Friend
My PSU is a corsair 500w
Im have only motherboard, two units of rx470 , hd ssd , one fan of 120mm, Keyboard, mouse and monitor
***** ( im no have cd rom )
Thanks
Almir
This is your PSU? http://www.corsair.com/en/cx500-80-plus-bronze-certified-power-supply-na-refurbished
My advice: try with a different PSU, but choose one with some more Amps on the +12V rail, like this: http://www.corsair.com/en/ax860i-digital-atx-power-supply-860-watt-80-plus-platinum-certified-fully-modular-psu-eu
See if you have the same issue.
Good luck
Can not be the PSU. I have here a second pcu in my house.
And I PUT up a second PSU and plugged.
im put only the 2nd video card in this 2nd PSU.
The pc normally connected and recognized the two video cards
And when starting the claymore's the pc shutdown again
Thanks
Almir
The load start as soon as you start Claymore, find a bigger PSU and try it.
It consumes ~150W at peaks, google it and you will see. Do you have something else that consumes power? HDD? External HDD? CD ROM? Fans? etc....
Do you have a link for your PSU so I can see it?
A good PSU which I recommend for a rig with 6 x Rx
http://www.corsair.com/en/ax1200i-digital-atx-power-supply-1200-watt-80-plus-platinum-certified-fully-modular-psu-eu
Dear Friend
My PSU is a corsair 500w
Im have only motherboard, two units of rx470 , hd ssd , one fan of 120mm, Keyboard, mouse and monitor
***** ( im no have cd rom )
Thanks
Almir
This is your PSU? http://www.corsair.com/en/cx500-80-plus-bronze-certified-power-supply-na-refurbished
My advice: try with a different PSU, but choose one with some more Amps on the +12V rail, like this: http://www.corsair.com/en/ax860i-digital-atx-power-supply-860-watt-80-plus-platinum-certified-fully-modular-psu-eu
See if you have the same issue.
Good luck
December 08, 2016, 08:12:40 PM
Dear Friend
Can not be the PSU. I have here a second pcu in my house.
And I PUT up a second PSU and plugged.
im put only the 2nd video card in this 2nd PSU.
The pc normally connected and recognized the two video cards
And when starting the claymore's the pc shutdown again
Thanks
Almir
It consumes ~150W at peaks, google it and you will see. Do you have something else that consumes power? HDD? External HDD? CD ROM? Fans? etc....
Do you have a link for your PSU so I can see it?
A good PSU which I recommend for a rig with 6 x Rx
http://www.corsair.com/en/ax1200i-digital-atx-power-supply-1200-watt-80-plus-platinum-certified-fully-modular-psu-eu
Dear Friend
My PSU is a corsair 500w
Im have only motherboard, two units of rx470 , hd ssd , one fan of 120mm, Keyboard, mouse and monitor
***** ( im no have cd rom )
Thanks
Almir
This is your PSU? http://www.corsair.com/en/cx500-80-plus-bronze-certified-power-supply-na-refurbished
My advice: try with a different PSU, but choose one with some more Amps on the +12V rail, like this: http://www.corsair.com/en/ax860i-digital-atx-power-supply-860-watt-80-plus-platinum-certified-fully-modular-psu-eu
See if you have the same issue.
Good luck
Can not be the PSU. I have here a second pcu in my house.
And I PUT up a second PSU and plugged.
im put only the 2nd video card in this 2nd PSU.
The pc normally connected and recognized the two video cards
And when starting the claymore's the pc shutdown again
Thanks
Almir
It consumes ~150W at peaks, google it and you will see. Do you have something else that consumes power? HDD? External HDD? CD ROM? Fans? etc....
Do you have a link for your PSU so I can see it?
A good PSU which I recommend for a rig with 6 x Rx
http://www.corsair.com/en/ax1200i-digital-atx-power-supply-1200-watt-80-plus-platinum-certified-fully-modular-psu-eu
Dear Friend
My PSU is a corsair 500w
Im have only motherboard, two units of rx470 , hd ssd , one fan of 120mm, Keyboard, mouse and monitor
***** ( im no have cd rom )
Thanks
Almir
This is your PSU? http://www.corsair.com/en/cx500-80-plus-bronze-certified-power-supply-na-refurbished
My advice: try with a different PSU, but choose one with some more Amps on the +12V rail, like this: http://www.corsair.com/en/ax860i-digital-atx-power-supply-860-watt-80-plus-platinum-certified-fully-modular-psu-eu
See if you have the same issue.
Good luck
December 08, 2016, 05:45:52 PM
I'm having an issue with port 4444, it does not matter what I do it will not connect to port 4444, easy enough , change to port 14444, it works but as soon as the Dev Fees kick in they will try US1.ethermine.org:4444, they will fail to connect and restart Claymore all over again.
Is there any ways to change that? Could I have the Dev Fees go to another pool, on the smaller CPUs it does it, goes to ethpool or the other one, its driving me crazy.
I guess The rig looses some 30 min per day doing that.
Thanks
Is there any ways to change that? Could I have the Dev Fees go to another pool, on the smaller CPUs it does it, goes to ethpool or the other one, its driving me crazy.
I guess The rig looses some 30 min per day doing that.
Thanks
December 08, 2016, 03:22:29 PM
It consumes ~150W at peaks, google it and you will see. Do you have something else that consumes power? HDD? External HDD? CD ROM? Fans? etc....
Do you have a link for your PSU so I can see it?
A good PSU which I recommend for a rig with 6 x Rx
http://www.corsair.com/en/ax1200i-digital-atx-power-supply-1200-watt-80-plus-platinum-certified-fully-modular-psu-eu
Dear Friend
My PSU is a corsair 500w
Im have only motherboard, two units of rx470 , hd ssd , one fan of 120mm, Keyboard, mouse and monitor
***** ( im no have cd rom )
Thanks
Almir
This is your PSU? http://www.corsair.com/en/cx500-80-plus-bronze-certified-power-supply-na-refurbished
My advice: try with a different PSU, but choose one with some more Amps on the +12V rail, like this: http://www.corsair.com/en/ax860i-digital-atx-power-supply-860-watt-80-plus-platinum-certified-fully-modular-psu-eu
See if you have the same issue.
Good luck
Jump to: