?
Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1044. (Read 6590718 times)
December 08, 2016, 02:21:41 AM
One question: "No DAG files" - is that mean that 2gb cards will be able to mine forever ?
?
December 08, 2016, 01:41:50 AM
no no
my claymore´s turn off the pc every time that im try to execute
what is the problem ?
my claymore´s turn off the pc every time that im try to execute
what is the problem ?
eth+xmr suport ?
What are the eth options plus other currencies?
Ethereum + Decred
Ethereum + SC
Ethereum + LBC
that said I would like to figure out which one is the most profitable maybe some of you have an answer for that.
In my case none of the above. Just eth was about the same or a little more profitable as any combo even though the drop in eth hashrate from dual mining was small (~5% I think). It was pretty close in terms of $$ but not worth the hassle IMO. Cool idea in theory though.
December 07, 2016, 09:48:07 PM
no no
my claymore´s turn off the pc every time that im try to execute
what is the problem ?
my claymore´s turn off the pc every time that im try to execute
what is the problem ?
eth+xmr suport ?
What are the eth options plus other currencies?
Ethereum + Decred
Ethereum + SC
Ethereum + LBC
that said I would like to figure out which one is the most profitable maybe some of you have an answer for that.
December 07, 2016, 09:23:34 PM
This is my eth.bat
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -r -1 -allpools 1 -ewal mywalletnumber.workerx -epsw x
obs : im already disable windows defender but my windows 10 continue to shutdown asfter im execute the eth.bat
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -r -1 -allpools 1 -ewal mywalletnumber.workerx -epsw x
obs : im already disable windows defender but my windows 10 continue to shutdown asfter im execute the eth.bat
December 07, 2016, 09:00:15 PM
no no
my claymore´s turn off the pc every time that im try to execute
what is the problem ?
my claymore´s turn off the pc every time that im try to execute
what is the problem ?
eth+xmr suport ?
What are the eth options plus other currencies?
December 07, 2016, 08:59:06 PM
no no
my claymore´s turn off the pc every time that im try to execute
what is the problem ?
my claymore´s turn off the pc every time that im try to execute
what is the problem ?
eth+xmr suport ?
December 07, 2016, 08:44:56 PM
eth+xmr suport ?
December 07, 2016, 07:55:52 PM
Dear Friends
How im can configure claymore´s for multi-gpu?
with one gpu work well
but im put a second vga card and the calymore´s close
and what ius the best coin to miner with ethereum ?
thanks
Almir
How im can configure claymore´s for multi-gpu?
with one gpu work well
but im put a second vga card and the calymore´s close
and what ius the best coin to miner with ethereum ?
thanks
Almir
December 07, 2016, 08:01:53 AM
Hello there new to the forum, new to mining, been learning a lot, great miner Mr. Claymore but I do have a problem, every thing is working fine but for some reason the rig resets every so often, some times every 15 minutes some times it will run no problem for 12 hours, the issue is always related to the dev fees, it show this in the screen:
ETH: Stratum - Cannot connect to US1.ethermine.org:4444
DevFee: ETH: Startum - Failed to connect, retry in 20 sec...
Then I get the GPU temps, then I get
Miner thread hangs, need to restart miner
It is very annoying, any posible solutions to this
Running 6 R9 390 on an Asrock H81 dual 1300 PSU 12 of memory, Celeron cpu, Ubuntu 14.
Any help would be greatly appreciated
Did read the readme file
Thanks
ETH: Stratum - Cannot connect to US1.ethermine.org:4444
DevFee: ETH: Startum - Failed to connect, retry in 20 sec...
Then I get the GPU temps, then I get
Miner thread hangs, need to restart miner
It is very annoying, any posible solutions to this
Running 6 R9 390 on an Asrock H81 dual 1300 PSU 12 of memory, Celeron cpu, Ubuntu 14.
Any help would be greatly appreciated
Did read the readme file
Thanks
December 06, 2016, 10:38:58 AM
I hope some can help me.. I have 2 rx480 cards currently hashing Zcash.. They're getting 180 Sols which is inline with what they are supposed to do.. I just tried switching over to mining ether instead on nanopool with claymore 7.4 and my 2 cards are only hashing at 22Mh/s.. From the research I've done, these cards should be doing 31 Mh/s. I'm using the following in my start file:
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eth-us-east1.nanopool.org:9999 -mport 0 -ewal MYWALLET.WORKER -epsw x
Any help is appreciated.
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eth-us-east1.nanopool.org:9999 -mport 0 -ewal MYWALLET.WORKER -epsw x
Any help is appreciated.
The stock card/bios should give you 24-25Mh/s. You can modify/optimize your card's bios to reach 30-31Mh/s and also lower the wattage.
The hashrate can be enhanced by ctrl+c>ctrl+v timings in BIOS, what about the wattage? How can it be lowered?
You can play with the memory timings and overclock the memory frequency (and undervolt it). For lower wattage you can lower the clock and voltage of your GPU. The exact settings/modifications are different for each type of cards.
These modifications can give you better hashrate for ETH-only mining. It is unstable for ETH+DCR/SIA/LBRY dual mining and don't forget that you won't get higher hashrate with the same settings if you're mining with Equihash or other algos. These guidelines are good for Ethash.
Ah!
I am glad to read this.
This explains why I have BSOD or gpu crash.
When I mine the zcash with my settings for ETH. Undecided Undecided Undecided
December 06, 2016, 10:34:02 AM
I hope some can help me.. I have 2 rx480 cards currently hashing Zcash.. They're getting 180 Sols which is inline with what they are supposed to do.. I just tried switching over to mining ether instead on nanopool with claymore 7.4 and my 2 cards are only hashing at 22Mh/s.. From the research I've done, these cards should be doing 31 Mh/s. I'm using the following in my start file:
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eth-us-east1.nanopool.org:9999 -mport 0 -ewal MYWALLET.WORKER -epsw x
Any help is appreciated.
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eth-us-east1.nanopool.org:9999 -mport 0 -ewal MYWALLET.WORKER -epsw x
Any help is appreciated.
The stock card/bios should give you 24-25Mh/s. You can modify/optimize your card's bios to reach 30-31Mh/s and also lower the wattage.
The hashrate can be enhanced by ctrl+c>ctrl+v timings in BIOS, what about the wattage? How can it be lowered?
Hello
I have rx480. And I followed this tutorial.: https://www.youtube.com/watch?v=Mwb67g4skGM
Then I lower the voltage with watman
And I have 31+ mh / s
I hope to help you.
December 06, 2016, 10:30:26 AM
I hope some can help me.. I have 2 rx480 cards currently hashing Zcash.. They're getting 180 Sols which is inline with what they are supposed to do.. I just tried switching over to mining ether instead on nanopool with claymore 7.4 and my 2 cards are only hashing at 22Mh/s.. From the research I've done, these cards should be doing 31 Mh/s. I'm using the following in my start file:
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eth-us-east1.nanopool.org:9999 -mport 0 -ewal MYWALLET.WORKER -epsw x
Any help is appreciated.
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eth-us-east1.nanopool.org:9999 -mport 0 -ewal MYWALLET.WORKER -epsw x
Any help is appreciated.
The stock card/bios should give you 24-25Mh/s. You can modify/optimize your card's bios to reach 30-31Mh/s and also lower the wattage.
The hashrate can be enhanced by ctrl+c>ctrl+v timings in BIOS, what about the wattage? How can it be lowered?
You can play with the memory timings and overclock the memory frequency (and undervolt it). For lower wattage you can lower the clock and voltage of your GPU. The exact settings/modifications are different for each type of cards.
These modifications can give you better hashrate for ETH-only mining. It is unstable for ETH+DCR/SIA/LBRY dual mining and don't forget that you won't get higher hashrate with the same settings if you're mining with Equihash or other algos. These guidelines are good for Ethash.
December 06, 2016, 10:29:26 AM
...
I created a reboot.bat file in the claymore folder With this command.
Shutdown / r / f / t 1
I created a reboot.bat file in the claymore folder With this command.
Shutdown / r / f / t 1
change the reboot bat to just :
shutdown /r /t 5
I think you are putting spaces after the backslash, and that's causing the problem.
OK that works .
But how do we get claymore to start automatically?
it's possible ?
thank you
Simply add your start.bat shortcut to
Code:
C:\Users\YOURUSER\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\startup\
big thx
December 06, 2016, 10:01:34 AM
Hi! ALL!!
What people are mining with their GPU rigs at this days of prices so low?
What people are mining with their GPU rigs at this days of prices so low?
December 06, 2016, 06:46:41 AM
I hope some can help me.. I have 2 rx480 cards currently hashing Zcash.. They're getting 180 Sols which is inline with what they are supposed to do.. I just tried switching over to mining ether instead on nanopool with claymore 7.4 and my 2 cards are only hashing at 22Mh/s.. From the research I've done, these cards should be doing 31 Mh/s. I'm using the following in my start file:
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eth-us-east1.nanopool.org:9999 -mport 0 -ewal MYWALLET.WORKER -epsw x
Any help is appreciated.
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eth-us-east1.nanopool.org:9999 -mport 0 -ewal MYWALLET.WORKER -epsw x
Any help is appreciated.
The stock card/bios should give you 24-25Mh/s. You can modify/optimize your card's bios to reach 30-31Mh/s and also lower the wattage.
The hashrate can be enhanced by ctrl+c>ctrl+v timings in BIOS, what about the wattage? How can it be lowered?
December 06, 2016, 02:36:34 AM
I hope some can help me.. I have 2 rx480 cards currently hashing Zcash.. They're getting 180 Sols which is inline with what they are supposed to do.. I just tried switching over to mining ether instead on nanopool with claymore 7.4 and my 2 cards are only hashing at 22Mh/s.. From the research I've done, these cards should be doing 31 Mh/s. I'm using the following in my start file:
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eth-us-east1.nanopool.org:9999 -mport 0 -ewal MYWALLET.WORKER -epsw x
Any help is appreciated.
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eth-us-east1.nanopool.org:9999 -mport 0 -ewal MYWALLET.WORKER -epsw x
Any help is appreciated.
The stock card/bios should give you 24-25Mh/s. You can modify/optimize your card's bios to reach 30-31Mh/s and also lower the wattage.
December 05, 2016, 09:36:45 PM
How many miners and which graphics cars are finally out of work due to high electricity? Just curious and patiently waiting for this shit to start correcting itself.
Best wishes
https://s13.postimg.org/dh2gtmj4n/Untitled.png
Best wishes
https://s13.postimg.org/dh2gtmj4n/Untitled.png
hold until Feb 2017
December 05, 2016, 09:26:43 PM
I hope some can help me.. I have 2 rx480 cards currently hashing Zcash.. They're getting 180 Sols which is inline with what they are supposed to do.. I just tried switching over to mining ether instead on nanopool with claymore 7.4 and my 2 cards are only hashing at 22Mh/s.. From the research I've done, these cards should be doing 31 Mh/s. I'm using the following in my start file:
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eth-us-east1.nanopool.org:9999 -mport 0 -ewal MYWALLET.WORKER -epsw x
Any help is appreciated.
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eth-us-east1.nanopool.org:9999 -mport 0 -ewal MYWALLET.WORKER -epsw x
Any help is appreciated.
December 05, 2016, 08:51:43 PM
Hi, I have a new problem.
When I mine, one or two miners will decrease hashrate a day later.
I start at 24Mh/s and end up at 4Mh/s (or 9 sometimes), the only way to fix it is to close down the miner and re-open it.
Any suggestion on how to fix this?
Miner: RX 480 4gb running Claymore (latest) dual mining.
Crimson 16.9.2 ( or whatever the latest are), I've tried multiple drivers, no effect.
When I mine, one or two miners will decrease hashrate a day later.
I start at 24Mh/s and end up at 4Mh/s (or 9 sometimes), the only way to fix it is to close down the miner and re-open it.
Any suggestion on how to fix this?
Miner: RX 480 4gb running Claymore (latest) dual mining.
Crimson 16.9.2 ( or whatever the latest are), I've tried multiple drivers, no effect.
Use the remote manager and enter the target/expected hashrate there. Make it work for you by executing restart miner command or osmething of that sort.
December 05, 2016, 08:49:38 PM
How many miners and which graphics cars are finally out of work due to high electricity? Just curious and patiently waiting for this shit to start correcting itself.
Best wishes
Best wishes
Jump to: