Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1102.

Trimegistus

legendary

Activity: 1564

Merit: 1027

I'm still on version 6.4

It has been stable for weeks now, so I don't see any reason why I should change.

Unless there is some mining speed improvement Grin

That was not the case with version 7.0, and a lot of folks felt that.

@Claymore, have made any improvements to the mining code?

PS: I run RX 480s

nevermind41

full member

Activity: 186

Merit: 100

@Claymore
I have some questions
I use your miner for solo mining. When I solo mine 7.0 version rigs find more block then 7.1. Because of this I turned back to 7.0. I think something is wrong with 7.1 for solo mining and also if there is an issue, I don't know it still exists in 7.2 too. I use geth windows for etc. I run it from a different pc from the rigs in lan.
Is it possible to put an option for GTX 1070 cards to disable fan speed monitoring from miner?
I have RX 470 and GTX 1070 but I still don't know Which ''-etha'' option must I use for my card. If you write optimized cards or slow cards, I will be glad.
My last question is about ''-etht'' Would you put more explanation about it? There aren't too much things and option in read me and mining forum communities. Because of this I need your help to use all the options for full optimization.

qqqq

legendary

Activity: 1596

Merit: 1011

Quote from: voidwalker on October 01, 2016, 11:12:43 AM

Quote from: Claymore on October 01, 2016, 11:00:09 AM

v7.2:

- added "-lidag" option to reduce intensity of DAG generation, it can help with OC or weak PSU.
- added temperature/fan monitoring for Linux version for gpu-pro drivers. Only monitoring is supported currently, not management.
- "r" key reloads pools from epools.txt and dpools.txt in runtime.
- fixed issue with wrong detection of card names.
- systems with up to 32 GPUs are supported now (with some minor limitations).
- Linux version: fixed issue with closing miner with "Ctrl-C".
- several minor improvements and bug fixes.
- EthMan: added "total online miners" and "total working gpus" info.
- EthMan: added color and font size options for the list of miners.

Thank you claymore, you're the best. I only wished you would open source ethman so we can make it a lot better.

+1

- added "-lidag" option to reduce intensity of DAG generation, it can help with OC or weak PSU.

Very useful option. Sometimes a few of my pc just freezes while DAG generation process. Especially one with (3xR9 290 2xR9 Nano).

I'm not using 7.1 because of wrong detection of card names but i guess 7.0 very stable right now. It mine for weeks without troubles.

Hurtman

full member

Activity: 180

Merit: 100

in GTX 980
Dual mining ETH+DCR
ETH=19 mh/s
DCR=197 mh/s

if i only DCR mining = 1750 mh/s

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: voidwalker on October 01, 2016, 11:12:43 AM

Quote from: Claymore on October 01, 2016, 11:00:09 AM

v7.2:

- added "-lidag" option to reduce intensity of DAG generation, it can help with OC or weak PSU.
- added temperature/fan monitoring for Linux version for gpu-pro drivers. Only monitoring is supported currently, not management.
- "r" key reloads pools from epools.txt and dpools.txt in runtime.
- fixed issue with wrong detection of card names.
- systems with up to 32 GPUs are supported now (with some minor limitations).
- Linux version: fixed issue with closing miner with "Ctrl-C".
- several minor improvements and bug fixes.
- EthMan: added "total online miners" and "total working gpus" info.
- EthMan: added color and font size options for the list of miners.

Thank you claymore, you're the best. I only wished you would open source ethman so we can make it a lot better.

With WireShark you can see JSON protocol details and create own even better tool in your favorite programming language. A few devs already did it, for example, there is app for Android.

voidwalker

newbie

Activity: 29

Merit: 0

Quote from: Claymore on October 01, 2016, 11:00:09 AM

v7.2:

- added "-lidag" option to reduce intensity of DAG generation, it can help with OC or weak PSU.
- added temperature/fan monitoring for Linux version for gpu-pro drivers. Only monitoring is supported currently, not management.
- "r" key reloads pools from epools.txt and dpools.txt in runtime.
- fixed issue with wrong detection of card names.
- systems with up to 32 GPUs are supported now (with some minor limitations).
- Linux version: fixed issue with closing miner with "Ctrl-C".
- several minor improvements and bug fixes.
- EthMan: added "total online miners" and "total working gpus" info.
- EthMan: added color and font size options for the list of miners.

Thank you claymore, you're the best. I only wished you would open source ethman so we can make it a lot better.

voidwalker

newbie

Activity: 29

Merit: 0

Quote from: wll1rah on October 01, 2016, 12:09:36 AM

Quote from: adamvp on September 28, 2016, 10:13:28 PM

Quote from: Claymore on September 28, 2016, 02:55:27 PM

Quote from: adamvp on September 28, 2016, 02:37:58 PM

another issue with Linux version, from few days it constantly switching SIA pools every 30-40minutes..
Windows version is ok, even if I revert rigs :S

Code:

SC: http error #28.
SC: Failed to check work on pool, retry in 10 sec..

This error code means "operation timeout".
I can say again and again: don't use Linux if you can use Windows! Most problems are related not to miner but to Linux itself and I have to find workarounds all the time.

Hmm Windows is too expensive, and is unstable if miner crash =windows crash and hard reset is necessary. If on linux fail = just kill the process

you can do the same on windows and it isn't to expensive since you can buy a POS tablet and use the product key from that, which you can get using slmgr or grab from the bios since they usually enable secure boot.

what is a POS tablet?

Quote from: tlmoscow on October 01, 2016, 08:57:17 AM

Quote

is it a known issue with rx 480 8gb that it takes 60-90 seconds after showing "POOL/SOLO version" for the miner to proceed to DAG generation?
happens on all my 4 rigs with windows 7/windows 10

Try to press anykey when miner window in focus...

I tried that, it's not because console scrolling is stuck. It's something else. Seems very random sometimes.

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

v7.2:

- added "-lidag" option to reduce intensity of DAG generation, it can help with OC or weak PSU.
- added temperature/fan monitoring for Linux version for gpu-pro drivers. Only monitoring is supported currently, not management.
- "r" key reloads pools from epools.txt and dpools.txt in runtime.
- fixed issue with wrong detection of card names.
- systems with up to 32 GPUs are supported now (with some minor limitations).
- Linux version: fixed issue with closing miner with "Ctrl-C".
- several minor improvements and bug fixes.
- EthMan: added "total online miners" and "total working gpus" info.
- EthMan: added color and font size options for the list of miners.

MantaMine

sr. member

Activity: 301

Merit: 250

Quote from: gorgamin on October 01, 2016, 06:02:28 AM

Claymore, any idea what the following might be?

4x RX470, win10:

10:56:51:597   1150   em hbt: 0, dm hbt: 0, fm hbt: 63,
10:56:51:597   1150   watchdog - thread 0, hb time 78
10:56:51:613   1150   watchdog - thread 1, hb time 219
10:56:51:613   1150   watchdog - thread 2, hb time 219
10:56:51:613   1150   watchdog - thread 3, hb time 94
10:56:51:613   1150   watchdog - thread 4, hb time 109
10:56:51:613   1150   watchdog - thread 5, hb time 234
10:56:51:613   1150   watchdog - thread 6, hb time 23828
10:56:51:628   1150   watchdog - thread 7, hb time 23688
10:56:51:628   1150   WATCHDOG: GPU error, you need to restart miner Sad

Faulty GPU, or Riser?
Thanks in advance, if you have a XMR address I'll buy you an untraceable beer^^

Did you set the virtual memory to the size recommended in the readme?

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: Joemid on October 01, 2016, 08:56:08 AM

Hello

Its possible that claymore bat send a email to me when miner stopped?

Thanks

You can execute .bat file in EthMan when miner stopped/disconnected/overheated or its hashrate is low. Probably you can send email from .bat.
Miner itself cannot send email, use pool for it.

tlmoscow

full member

Activity: 124

Merit: 100

Quote

is it a known issue with rx 480 8gb that it takes 60-90 seconds after showing "POOL/SOLO version" for the miner to proceed to DAG generation?
happens on all my 4 rigs with windows 7/windows 10

Try to press anykey when miner window in focus...

Joemid

newbie

Activity: 44

Merit: 0

Hello

Its possible that claymore bat send a email to me when miner stopped?

Thanks

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: voidwalker on October 01, 2016, 07:29:14 AM

is it a known issue with rx 480 8gb that it takes 60-90 seconds after showing "POOL/SOLO version" for the miner to proceed to DAG generation?
happens on all my 4 rigs with windows 7/windows 10

It depends on CPU speed, GPU name and number of GPUs, OpenCL recompiles kernels when necessary (for some cards). In past it worked faster, but currently miner has a lot of GPU code. I will reduce this delay, it's in my todo list.

voidwalker

newbie

Activity: 29

Merit: 0

is it a known issue with rx 480 8gb that it takes 60-90 seconds after showing "POOL/SOLO version" for the miner to proceed to DAG generation?
happens on all my 4 rigs with windows 7/windows 10

maxmad_x

sr. member

Activity: 546

Merit: 250

It takes a lot to build but not much to lose

Quote from: Snorremans on September 28, 2016, 04:48:33 PM

i give up and hope someone can help me...

i have 8x nvidia gtx 1080.
windows 7, cause its not yet working under ubuntu 16.04

i have installed cuda but keep getting errors....
i added one image which shows everything i can show or what is needed.
Newest drivers are installed etc etc.

dude. Did you install windows 10 anniversary edition? My problems got solved with that.

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: kenshirothefist on October 01, 2016, 05:56:32 AM

Claymore, you could fix the issue when using NVIDIA GPUs without fans (watercooling, server-grade GPUs, etc.):

Ok, I see, you mean not to show messages. Ok, I will hide messages so they will appear in log file only.

Quote from: gorgamin on October 01, 2016, 06:02:28 AM

Claymore, any idea what the following might be?

4x RX470, win10:

10:56:51:597   1150   em hbt: 0, dm hbt: 0, fm hbt: 63,
10:56:51:597   1150   watchdog - thread 0, hb time 78
10:56:51:613   1150   watchdog - thread 1, hb time 219
10:56:51:613   1150   watchdog - thread 2, hb time 219
10:56:51:613   1150   watchdog - thread 3, hb time 94
10:56:51:613   1150   watchdog - thread 4, hb time 109
10:56:51:613   1150   watchdog - thread 5, hb time 234
10:56:51:613   1150   watchdog - thread 6, hb time 23828
10:56:51:628   1150   watchdog - thread 7, hb time 23688
10:56:51:628   1150   WATCHDOG: GPU error, you need to restart miner Sad

Faulty GPU, or Riser?
Thanks in advance, if you have a XMR address I'll buy you an untraceable beer^^

Probably riser if you don't overclock GPUs. Due to dev fee you already buy me a beer when you use my miner

gorgamin

newbie

Activity: 7

Merit: 0

Claymore, any idea what the following might be?

4x RX470, win10:

10:56:51:597   1150   em hbt: 0, dm hbt: 0, fm hbt: 63,
10:56:51:597   1150   watchdog - thread 0, hb time 78
10:56:51:613   1150   watchdog - thread 1, hb time 219
10:56:51:613   1150   watchdog - thread 2, hb time 219
10:56:51:613   1150   watchdog - thread 3, hb time 94
10:56:51:613   1150   watchdog - thread 4, hb time 109
10:56:51:613   1150   watchdog - thread 5, hb time 234
10:56:51:613   1150   watchdog - thread 6, hb time 23828
10:56:51:628   1150   watchdog - thread 7, hb time 23688
10:56:51:628   1150   WATCHDOG: GPU error, you need to restart miner Sad

Faulty GPU, or Riser?
Thanks in advance, if you have a XMR address I'll buy you an untraceable beer^^

kenshirothefist

sr. member

Activity: 457

Merit: 273

Claymore, you could fix the issue when using NVIDIA GPUs without fans (watercooling, server-grade GPUs, etc.):

Code:

NVML: cannot get fan speed, error 3
NVML: cannot get fan speed, error 3
NVML: cannot get fan speed, error 3
NVML: cannot get fan speed, error 3
NVML: cannot get fan speed, error 3
NVML: cannot get fan speed, error 3
NVML: cannot get fan speed, error 3
NVML: cannot get fan speed, error 3
NVML: cannot get fan speed, error 3
NVML: cannot get fan speed, error 3
NVML: cannot get fan speed, error 3
NVML: cannot get fan speed, error 3
NVML: cannot get fan speed, error 3
NVML: cannot get fan speed, error 3
NVML: cannot get fan speed, error 3
NVML: cannot get fan speed, error 3
GPU0 t=48C fan=0%, GPU1 t=76C fan=0%, GPU2 t=44C fan=0%, GPU3 t=71C fan=0%, GPU4 t=63C fan=0%, GPU5 t=52C fan=0%, GPU6 t=61C fan=0%, GPU7 t=50C fan=0%

Code:

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: alevlaslo on September 30, 2016, 11:39:04 PM

-logfile 0 do not working at 7.1

Where did you find "-logfile 0" option value? It must be filename, not "0" or "1" (or do you want to name file as "0"?). From readme:

Quote

-logfile debug log file name. After restart, miner will append new log data to the same file. If you want to clear old log data, file name must contain "noappend" string.
If missed, default file name will be used.

If you want to disable logging, use "-dbg -1".

Ziscadas

full member

Activity: 452

Merit: 100

Quote from: 36524s on September 30, 2016, 07:01:28 AM

I have flashed my bios and 4 out of my 5 cards are running at 29mh but 1 is running at 18. Is there an easy way of identifying which physical card it is using the Claymore mining app (which is awesome btw!!!)?

You can use -di command to activate just one card and see if that cards is working with the GPU usage in the MSI afterburner.

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1102. (Read 6590718 times)