Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1100.

beanladen

newbie

Activity: 1

Merit: 0

Quote from: Claymore on April 11, 2016, 10:51:50 AM

Quote from: blastbob on April 11, 2016, 10:39:25 AM

My antivirus removed the file as soon as it was available.

So ill keep off until some more comments are available

I pack my miners to prevent disassembling.

Hello Claymore. I have 1 issue when using your miner.
Everything work fine until devfee mining.
My rig stop mining every 1 hour when devfee mining appear. devfee not working so my rig mining too.
So I have to restart miner every 1 hour.
Can you help me with this problems.
I'm using 5x gigabyte g1 gaming rig. AMD 16.7.2 driver.
https://s18.postimg.org/496jwb0xl/Untitled.jpg

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: qqqq on October 02, 2016, 06:13:45 PM

Quote from: Claymore on October 02, 2016, 01:58:55 AM

Quote from: qqqq on October 01, 2016, 05:42:05 PM

Claymore, is there any workaround for gtx 1080 (372.90 / win 10) and not getting 5 Mhs ?

Yes, Windows 10 Anniversary + latest drivers wddm 2.1.

After update on genoil 20 mh\s, your miner don't run and says that Opencl.dll is not found (Why Opencl for Nvidia Huh

). I have updated to 1607 Win 10 (Anniversary) and didn't touch the drivers.

Don't forget that the miner supports both OpenCL and CUDA, linking is static so opencl.dll is required.
It's another bug of Win10 when it eats that dll, if you search for "opencl.dll" in this thread you'll find similar posts like yours, for example:
https://bitcointalk.org/index.php?topic=1433925.msg16262905;topicseen#msg16262905

goen

member

Activity: 77

Merit: 10

Quote from: citronick on September 28, 2016, 10:59:59 AM

Quote from: adamvp on September 28, 2016, 10:55:43 AM

Quote from: goen on September 28, 2016, 04:47:59 AM

Claymore,
i got many Share Accepted and SHARE FOUND msg when i use dagger hashimoto.
i didnt get so many msg if using ethpool.

is this normal?

ethpool is solo, right?

I mine at ethpool and I can say that its not outright "solo" - however behaves like solo.

The devs call it "predictable solo mining"

if you have a few hundred MHs or more, ethpool IMHO is best pool to be, as you get 5++ coins per every round.

okay i will compare the result between them.
thanks guys..

voidwalker

newbie

Activity: 29

Merit: 0

Claymore, how about adding a mirror with direct http links with easy to remember file names ? (for easy downloading with wget on linux)

Lion BItcoin Shop

hero member

Activity: 588

Merit: 500

BitcoreService.com

anyone get problem to conect pool with claymore? i can't connect my claymore after update my win 10 Huh

the firewall off, and the security system is off too

qqqq

legendary

Activity: 1596

Merit: 1011

Quote from: Claymore on October 02, 2016, 01:58:55 AM

Quote from: qqqq on October 01, 2016, 05:42:05 PM

Claymore, is there any workaround for gtx 1080 (372.90 / win 10) and not getting 5 Mhs ?

Yes, Windows 10 Anniversary + latest drivers wddm 2.1.

After update on genoil 20 mh\s, your miner don't run and says that Opencl.dll is not found (Why Opencl for Nvidia Huh

). I have updated to 1607 Win 10 (Anniversary) and didn't touch the drivers.

maxmad_x

sr. member

Activity: 546

Merit: 250

It takes a lot to build but not much to lose

Quote from: Hurtman on October 01, 2016, 05:20:00 PM

Quote from: maxmad_x on October 01, 2016, 04:42:28 PM

Quote from: Hurtman on October 01, 2016, 03:07:52 PM

Quote from: scryptr on October 01, 2016, 02:27:07 PM

Quote from: Hurtman on October 01, 2016, 12:02:15 PM

in GTX 980
Dual mining ETH+DCR
ETH=19 mh/s
DCR=197 mh/s

if i only DCR mining = 1750 mh/s

INCREASE DECRED INTENSITY--

You can increase the intensity for your secondary coin with the "dcri" flag. I have mine set at "dcri 75", more than twice the default value of "dcri 30". This will more than double your hash rate for Decred (DCR), and have little effect on your Ethereum (ETH) hash rate. The cards from nVidia are very good for this, my 980ti gets a hash rate over 500MH/s on SiaCoin (SC). --scryptr

Tried different settings, double mining not profitable.
The main ethereum power strongly falls. On SIA twice

Hey Bro,
Depending upon your cards you will have to find the best setting of dcri flag. Start low (20 or something like that ) and use "+" key to slowly increase until the ether mining starts to fall more than 5%. If you want keep an eye on power consumption. In certain situations dual mining may not be profitable more as your power consumption increases / AC power needed to keep mining cool increases / more downtime because of throttling after some time of mining etc. So just find your Efficiency (max) on the curve and then use that setting thereafter.

Single:
ETH=19
DCR=1750

Dual:
ETH=17
DCR=210

It is better to get something one

I guess you can use whattomine.com to find the right combo for you. Thats the last advice

Nippy-ua

newbie

Activity: 48

Merit: 0

Quote from: Claymore on April 11, 2016, 10:30:36 AM

Claymore's Dual Ethereum+Decred AMD+NVIDIA GPU Miner.

- systems with up to 32 GPUs are supported now (with some minor limitations).

Thanks BRO
it remains to solve the problem with the drivers...

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: cptfisher on October 02, 2016, 11:04:26 AM

-U --cuda-extragpu-mem 4096 --cuda-streams 1 --cuda-block-size 64 --cuda-grid-size 4096
for genoil
for ccminer i use 1.8.2 with -i 23 no special parameter (but also not specifing intensity is giving me same results)

Ok, I'll check it soon, though in my tests I always use stock settings, no OC, no changing power limits, no undervolting, no modded bios etc, it is not important when compare two miners.

cptfisher

hero member

Activity: 649

Merit: 505

-U --cuda-extragpu-mem 4096 --cuda-streams 1 --cuda-block-size 64 --cuda-grid-size 4096

for genoil

for ccminer i use 1.8.2 with -i 23 no special parameter (but also not specifing intensity is giving me same results)

settings :

70 % power limit

+ 212 core

+ 756 mem

60% fan speed

Temp limit 92 degrees ( videocards at 63 degrees anyway so no problem) power approximately 350 - 370 w from the wall (3x 1070 gtx)

alterantively i could specify no param to genoil and get 70 mhs to ethereum and 240 from ccminer with same card specs.

raising power limit and core or mem does not yeld any significant improvement but raising the engery consumed. alternatively there is also possibility to run x11revo at 11mhs and eth at 9 mhs OR 23 mhs Eth and 6 mhs x11 revo for each card . same settings. Pretty good considering that just x11rev gives 36 mh max on 3 cards ( so 12 mhs per card). power is lower . 320 w

also i wanted to ask why if i put 50 % power the cores do not turbo bost and hangs at low speed _ they should stay at 1400 - 1500 according to oc but they chill at 1000 slowing greatly eht (happens both with u and genoil... with cc miner instead card does not sit but keep working at full speed)

else 1070 gtx would be best card for eth. 70w @ 34 mhs by solving this issue

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: cptfisher on October 02, 2016, 07:05:54 AM

at the moment claymore you should improve the code for libry coin... im speaking as nvidia user... not profitable to use your miner....
genoil + ccminer running at same time on windows will produce approximately 13% more than your miner and for free
3 x 1070 gtx @ 70 % power will produce 36 mhas eth and 610 lbry coin ... and no fee involved (except the pool fee dwarf pool... suprnova has no fee if i remember.) 365 w from the wall ( approximaterly 330 w REAL considering psu efficency. 100w /gpu considering 30w for system)
24h tested stable
alternatively we can give more priority to eth and produce with same settings 67 Eth and 270 lbry

Ok, I'll check it. Can you send the command lines for both miners? If I run both Genoil+ccminer1.8.3 I get only 18.8MH/s ETH + 71MH/s LBC (single stock 1070). If I start ccminer1.8.3 only, I see 278MH/s LBC.

Quote from: Odissey on October 02, 2016, 09:37:29 AM

Good day. Tell me what kind of error and whether it affects what the realties.
ETH: Received error: {"id":4,"result":null,"error":[21,"jobnotfound"]}

Stale share response. Probably your pool does not accept stale shares, which is not good for ETH.

Odissey

newbie

Activity: 1

Merit: 0

Good day. Tell me what kind of error and whether it affects what the realties.

ETH: Received error: {"id":4,"result":null,"error":[21,"jobnotfound"]}

sealofsun

sr. member

Activity: 420

Merit: 250

How to overclock memory to 2275MHz? I tried and maximum was 2250MHz (via Asus GPU Tweak II) rx480

cptfisher

hero member

Activity: 649

Merit: 505

at the moment claymore you should improve the code for libry coin... im speaking as nvidia user... not profitable to use your miner....

genoil + ccminer running at same time on windows will produce approximately 13% more than your miner and for free

3 x 1070 gtx @ 70 % power will produce 36 mhas eth and 610 lbry coin ... and no fee involved (except the pool fee dwarf pool... suprnova has no fee if i remember.) 365 w from the wall ( approximaterly 330 w REAL considering psu efficency. 100w /gpu considering 30w for system)

24h tested stable

alternatively we can give more priority to eth and produce with same settings 67 Eth and 270 lbry

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: jewelparty on October 02, 2016, 03:31:37 AM

Quote from: qqqq on October 01, 2016, 05:42:05 PM

Claymore, is there any workaround for gtx 1080 (372.90 / win 10) and not getting 5 Mhs ?

Would say it's ok if yours was 1070, but it's 1080.
I'm on GTX 970 Ti and Win 10 Anniversary x64 and get 4 Mhs (which i don't think it's ok). Drivers don't change it, latest or 352.84.

For 9xx on Win10 you should use old drivers like 352.xx and miner cuda 6.5.
From OP:

Code:

NVIDIA DRIVERS:
9xx cards in Windows 7 x64: just use latest/recent drivers from Nvidia website (for example, 368.81). Note that latest 372.54 is slower than 368.81.
9xx cards in Windows 10 x64: you have to use old drivers (for example, 352.xx) and miner built for cuda6.5.
10xx cards in Windows 7 x64: just use latest 372.54 drivers from Nvidia website.
10xx cards in Windows 10 x64: just use latest 372.54 drivers from Nvidia website, note that you must have Win10 Anniversary update.

Quote from: yslyung on October 02, 2016, 03:48:05 AM

@claymore, eth + SC or eth+lbc is 2%fee...
eth +dcr 1%fee?
that's according to op on 1st page. mind to clarify?
thx.

From OP or Readme:

Quote

This miner is free-to-use, however, current developer fee is 1% for Ethereum-only mining mode (-mode 1) and 2% for Ethereum+Decred mining mode (-mode 0)

Well, if you think it is not clear, I will change it to:
current developer fee is 1% for Ethereum-only mining mode (-mode 1) and 2% for dual mining mode (-mode 0)

Za1n

legendary

Activity: 1078

Merit: 1011

Is it just me or does EthMan display 1 extra GPU under the "Total Working GPUs:" summary when displayed on the webpage?

yslyung

legendary

Activity: 1500

Merit: 1002

Mine Mine Mine

@claymore, eth + SC or eth+lbc is 2%fee...
eth +dcr 1%fee?
that's according to op on 1st page. mind to clarify?

thx.

jewelparty

newbie

Activity: 1

Merit: 0

Quote from: qqqq on October 01, 2016, 05:42:05 PM

Claymore, is there any workaround for gtx 1080 (372.90 / win 10) and not getting 5 Mhs ?

Would say it's ok if yours was 1070, but it's 1080.
I'm on GTX 970 Ti and Win 10 Anniversary x64 and get 4 Mhs (which i don't think it's ok). Drivers don't change it, latest or 352.84.

agis6

newbie

Activity: 27

Merit: 0

Quote from: adaseb on October 02, 2016, 02:41:08 AM

In the Remote Monitor

Under RUNNING TIME what does the number inside the parenthesis mean?

Like

64:00 (1)

It shows how many time the remote manager has reconnected to the miner, during the time the remote manager has been running.
Reconnects can be because of miner restarts, computer restarts, etc.

citronick

legendary

Activity: 1834

Merit: 1080

---- winter*juvia -----

Quote from: adaseb on October 02, 2016, 02:41:08 AM

In the Remote Monitor

Under RUNNING TIME what does the number inside the parenthesis mean?

Like

64:00 (1)

I think its the number of times miner was restarted due to GPU hang...

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1100. (Read 6590718 times)