Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1150.

dagarair

sr. member

Activity: 847

Merit: 383

Quote from: xeridea on August 26, 2016, 10:18:09 AM

Quote from: dagarair on August 26, 2016, 05:35:47 AM

I just got in 6 x MSI 480 Gaming X 8 GB Cards. Quickly installed them and newest drivers 16.8.2 and show:

ETH / SIA or DCR - 24.5mh and 370 SIA/DCR on default intensity and 1300 Watts at the plug.

ETH / SOLO - 24.5 1170 Watts at plug

What setting do you use on your 480 to undervolt those to a stable undervolt? Like I said I just got them so don't know how they will react =)

Thanks!

Depends on card, I have 2 Sapphire 470s (4GB and 8GB), and they are both stable at 0.955v. To get under 1v, I also have to lower memory voltage. I have an Power Color Red Devil 470, it is more around 0.97, it varies between 0.97 and 1.0v, I have it set at 1.03v, I guess they handle the voltage differently. So it depends on card. 480 would probably be similar. So I would start at around 1.03v, and see from their, when computer locks up, add about 30mv and test for stability, press s while mining to check for incorrect shares. Also I use ~40-60 DCRI, maybe higher for a 480, my first one I just ordered so I don't know yet. I get 24.3/450 with sia, and dcri 38 on a 470. I get about 160-170W at the wall per card.

Do you undervolt off of the bat file? If so would you mind sharing what you write in there? Thanks!

adamvp

hero member

Activity: 1246

Merit: 708

Sorry Claymore, You were right about Windows 10 focus miner stopping..
Could you tell me how to disable this feauture to prevent further mining breaks?

n0x1ous

newbie

Activity: 14

Merit: 0

Quote from: wishxy on August 26, 2016, 11:21:12 AM

I have good offer to buy brand new 6x Gigabyte RX 480. Any thoughts or experience?

if they are reference go for it. when undervolted and optimized for mining they dont run that hot or loud IMO

madmartyk

legendary

Activity: 2702

Merit: 1030

Yes I am a pirate, 300 years too late!

Quote from: wishxy on August 26, 2016, 11:21:12 AM

I have good offer for new 6x Gigabyte RX 480. Any thoughts or experience?

They run HOT and you have to have powered risers

wishxy

full member

Activity: 474

Merit: 101

I have good offer to buy brand new 6x Gigabyte RX 480. Any thoughts or experience?

joaocha

full member

Activity: 254

Merit: 100

Offtopic question, Can i use a Usb Pcie Riser on my notebook for gaming?
runing at 1x will a r9 290x or 390 work right?

xeridea

sr. member

Activity: 449

Merit: 251

Quote from: dagarair on August 26, 2016, 05:35:47 AM

I just got in 6 x MSI 480 Gaming X 8 GB Cards. Quickly installed them and newest drivers 16.8.2 and show:

ETH / SIA or DCR - 24.5mh and 370 SIA/DCR on default intensity and 1300 Watts at the plug.

ETH / SOLO - 24.5 1170 Watts at plug

What setting do you use on your 480 to undervolt those to a stable undervolt? Like I said I just got them so don't know how they will react =)

Thanks!

Depends on card, I have 2 Sapphire 470s (4GB and 8GB), and they are both stable at 0.955v. To get under 1v, I also have to lower memory voltage. I have an Power Color Red Devil 470, it is more around 0.97, it varies between 0.97 and 1.0v, I have it set at 1.03v, I guess they handle the voltage differently. So it depends on card. 480 would probably be similar. So I would start at around 1.03v, and see from their, when computer locks up, add about 30mv and test for stability, press s while mining to check for incorrect shares. Also I use ~40-60 DCRI, maybe higher for a 480, my first one I just ordered so I don't know yet. I get 24.3/450 with sia, and dcri 38 on a 470. I get about 160-170W at the wall per card.

asbator

member

Activity: 68

Merit: 10

Quote from: ?? on ??

Quote from: asbator on August 26, 2016, 07:20:56 AM

Claymore, how much can i expect from gtx 1080? i'm wonder what to buy for gaming rig

gtx 1080 is not good for ETH the memory is GDDR5X it does not work well on ETH (half speed cause of the memory architecture) but it will rock for games my opinion if you want to do both buy a 1070 especially gigabyte G1

Gigabyte made worst 1070, i had two and returned them because of NOISE.
Chceck this out: https://www.youtube.com/watch?v=awB3VivRPAo

d57heinz

legendary

Activity: 1453

Merit: 1011

Bitcoin Talks Bullshit Walks

Quote from: PPOC on August 26, 2016, 01:27:53 AM

Quote from: mikhan on August 26, 2016, 01:20:42 AM

So you got 6 x16-x1 risers? Have you tried x16-x16 riser if you got one? i got a gigabyte mb which recognized all 6 cards if two of them are installed directly to mb or using x16-x16 riser. A bug or feature, don't know.

Yep, using 6 x x16-x1 powered risers, the H81 BTC Pro MB only has on x16 on board and if i place a card directly in the slot then it covers one of the X1 slots. I don't have a x16 to x16 riser to test, but guess I'll order a couple to try. Just pissed, have 6 480's sitting around doing nothing and diff is shooting up daily!

That said, looked on Amazon for a x16 to x16 and they all have shit reviews, not a single one looks good, people saying it has shit contacts and a few fired the MB.

Any recommendations on a quality x16 to x16 riser?

Watch those 16x-16x. I just fried a vid card with one of those. Luckily it was a cheapo I used just to setup Windows. I suggest to do what I had to do with the Msi. load one card at a time. Rebooting between each card. Also what vid connection are you using For mine I had to connect a special monitor plug to it. Lookup on Amazon. They are from compulab "display emulator". Get the hdmi version and connect monitor to the dvi connection of same card or the card that is in the 16x slot. Those mobo will work with a 1x-16x in the 16x slot.

n0x1ous

newbie

Activity: 14

Merit: 0

Quote from: PPOC on August 26, 2016, 01:13:02 AM

Quote from: Masked_Immortal on August 26, 2016, 01:10:04 AM

Quote from: PPOC on August 25, 2016, 11:14:04 PM

Am I doing something wrong? I see many people here running 6 X RX480 on the BTC PRO MB and Win7 and Win10, I have the same setup using powered risers and with 6 cards can't even get to post. Most I got working is 4 cards. I have the MB running 295 X2 GPU, 3 of them for a total of 6 GPU's fine, but no dice with the 480's. Am I missing something?

How many GPU's do you have on device manager and what are their status?

I can only boot into windows with 4 CPUs plugged into MB, I see all 4. But when adding a 5th or 6th on the MB, fails to post. does not even get to load windows. No post. I tried win10, win7 and even EthOS which is linux based. Same symptoms, will not post with more then 4 GPUs. I even tried the H97 Anniversary MB, same thing, best I can get is 4 cards.

I had the same problem on H97 anniversary. The fix was to install Windows in UEFI mode and its been smooth sailing since.

asbator

member

Activity: 68

Merit: 10

Claymore, how much can i expect from gtx 1080? i'm wonder what to buy for gaming rig

adaseb

legendary

Activity: 3808

Merit: 1723

Quote from: sirslayer on August 26, 2016, 01:58:38 AM

Claymore, great job... newest version of your miner works with an old AMD 5850 with 1gb of ram (gpu1).. very low scores but im impressed that it havent crash my computer yet...
Grin

ETH: 08/25/16-23:51:21 - New job from us-east1.ethereum.miningpoolhub.com:17020
ETH - Total Speed: 10.720 Mh/s, Total Shares: 1, Rejected: 0, Time: 00:01
ETH: GPU0 10.388 Mh/s, GPU1 0.332 Mh/s
SC - Total Speed: 160.806 Mh/s, Total Shares: 1, Rejected: 0
SC: GPU0 155.822 Mh/s, GPU1 4.984 Mh/s
ETH: 08/25/16-23:51:23 - SHARE FOUND - (GPU 0)
ETH: Share accepted (94 ms)!

Your 5850 must have 2gb of RAM, with 1gb it would be impossible to mine.

dagarair

sr. member

Activity: 847

Merit: 383

I just got in 6 x MSI 480 Gaming X 8 GB Cards. Quickly installed them and newest drivers 16.8.2 and show:

ETH / SIA or DCR - 24.5mh and 370 SIA/DCR on default intensity and 1300 Watts at the plug.

ETH / SOLO - 24.5 1170 Watts at plug

What setting do you use on your 480 to undervolt those to a stable undervolt? Like I said I just got them so don't know how they will react =)

Thanks!

calculatorduck

member

Activity: 93

Merit: 10

Quote from: nhando on August 25, 2016, 07:11:01 PM

What are you guys getting hash rate wise for NVIDIA 1070 dual mining with SIA using Claymore?

I'm still experimenting, right now I have it at 26.7 mh/s for ETH with 715mh/s for SIA. EVGA FTW card.

sp_

legendary

Activity: 2954

Merit: 1087

Team Black developer

Your 5850 is a 2GB card. You can't mine etherum with 1GB cards.

mikhan

member

Activity: 84

Merit: 10

PPOC, try just reset the mb bios and play with gen1-2-3 settings in bios, it seems to be a common problem with h81 btc
personally i use very old x16-x16 risers left from litecoin epoch several years ago...

sirslayer

hero member

Activity: 540

Merit: 501

chickens and cryptos

Claymore, great job... newest version of your miner works with an old AMD 5850 with 1gb of ram (gpu1).. very low scores but im impressed that it havent crash my computer yet...
Grin

ETH: 08/25/16-23:51:21 - New job from us-east1.ethereum.miningpoolhub.com:17020
ETH - Total Speed: 10.720 Mh/s, Total Shares: 1, Rejected: 0, Time: 00:01
ETH: GPU0 10.388 Mh/s, GPU1 0.332 Mh/s
SC - Total Speed: 160.806 Mh/s, Total Shares: 1, Rejected: 0
SC: GPU0 155.822 Mh/s, GPU1 4.984 Mh/s
ETH: 08/25/16-23:51:23 - SHARE FOUND - (GPU 0)
ETH: Share accepted (94 ms)!

PPOC

hero member

Activity: 575

Merit: 500

Quote from: mikhan on August 26, 2016, 01:20:42 AM

So you got 6 x16-x1 risers? Have you tried x16-x16 riser if you got one? i got a gigabyte mb which recognized all 6 cards if two of them are installed directly to mb or using x16-x16 riser. A bug or feature, don't know.

Yep, using 6 x x16-x1 powered risers, the H81 BTC Pro MB only has on x16 on board and if i place a card directly in the slot then it covers one of the X1 slots. I don't have a x16 to x16 riser to test, but guess I'll order a couple to try. Just pissed, have 6 480's sitting around doing nothing and diff is shooting up daily!

That said, looked on Amazon for a x16 to x16 and they all have shit reviews, not a single one looks good, people saying it has shit contacts and a few fired the MB.

Any recommendations on a quality x16 to x16 riser?

mikhan

member

Activity: 84

Merit: 10

So you got 6 x16-x1 risers? Have you tried x16-x16 riser if you got one? i got a gigabyte mb which recognized all 6 cards if two of them are installed directly to mb or using x16-x16 riser. A bug or feature, don't know.

PPOC

hero member

Activity: 575

Merit: 500

Quote from: Masked_Immortal on August 26, 2016, 01:10:04 AM

Quote from: PPOC on August 25, 2016, 11:14:04 PM

Am I doing something wrong? I see many people here running 6 X RX480 on the BTC PRO MB and Win7 and Win10, I have the same setup using powered risers and with 6 cards can't even get to post. Most I got working is 4 cards. I have the MB running 295 X2 GPU, 3 of them for a total of 6 GPU's fine, but no dice with the 480's. Am I missing something?

How many GPU's do you have on device manager and what are their status?

I can only boot into windows with 4 CPUs plugged into MB, I see all 4. But when adding a 5th or 6th on the MB, fails to post. does not even get to load windows. No post. I tried win10, win7 and even EthOS which is linux based. Same symptoms, will not post with more then 4 GPUs. I even tried the H97 Anniversary MB, same thing, best I can get is 4 cards.

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1150. (Read 6590757 times)