Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1156.

ocminer

legendary

Activity: 2716

Merit: 1240

Quote from: CaptainMAD on August 23, 2016, 05:10:14 AM

I'm using the latest Claymore and mining on an XFX RX480 (8gb) - I have tried previous versions but still give the same problem

I'm getting 23.2Mh Ether and 460Mh Decred, 0 invalid on Eth, but always get in the region of 23% invalid on Decred.

I've tried different pool difficulty and intensity settings, but it's always around 23% invalid no matter what. Is this normal?

This is my startup.bat:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eth-eu.dwarfpool.com:8008 -ewal 0xremoved -epsw xxx -dpool http://dcr.suprnova.cc:9112 -dwal removed.dcr -dpsw xxx -ethi 20 -dcri 40

Try to use stratum for dcr instead of getwork, should give you much better results.

Claymore command for merged ETC + DCR:
ethdcrminer64.exe -epool etc-eu.suprnova.cc:3333 -ewal suprnova.1 -epsw x -esm 3 -dpool dcr.suprnova.cc:2252 -dwal suprnova.1 -dpsw x -allpools 1

espressodelisi

full member

Activity: 322

Merit: 100

I am running claymore 6.2 on linux, ubuntu 14.04. 2 r9 280x and one r9 270.
hashrate seems a little bit low, but not much to complain about. but it seems more stable than 5.3 version.

Thanks.

CaptainMAD

member

Activity: 90

Merit: 10

I'm using the latest Claymore and mining on an XFX RX480 (8gb) - I have tried previous versions but still give the same problem

I'm getting 23.2Mh Ether and 460Mh Decred, 0 invalid on Eth, but always get in the region of 23% invalid on Decred.

I've tried different pool difficulty and intensity settings, but it's always around 23% invalid no matter what. Is this normal?

This is my startup.bat:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eth-eu.dwarfpool.com:8008 -ewal 0xremoved -epsw xxx -dpool http://dcr.suprnova.cc:9112 -dwal removed.dcr -dpsw xxx -ethi 20 -dcri 40

I have not overclocked the card, and temperatures is a stable 69 degrees with 70% fan

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

About ADL in GPU-PRO drivers, just found a beautiful answer:

https://bugs.freedesktop.org/show_bug.cgi?id=96786

...
ADL is not supported in the amdgpu-pro driver. The same functionality can be accessed via standard Linux interfaces (e.g., hwmon for temperature and fan control, sysfs for clock control, etc..
...

So AMD decided not to worry about ADL support in new drivers for Linux. Excellent solution.

d57heinz

legendary

Activity: 1453

Merit: 1011

Bitcoin Talks Bullshit Walks

Quote from: YIz on August 22, 2016, 09:08:45 PM

Anyone knows what to expect from a 290 Tri-X running at 1.1GHz?

30-31.5 mhs depending on the card.

BR

Tomintx

member

Activity: 69

Merit: 10

Quote from: x201k120 on August 23, 2016, 03:03:14 AM

Quote from: Tomintx on August 23, 2016, 02:10:27 AM

I've had the Claymore miner running in Windows 7 for a month, on 2 GPU's. Quite happy.

Now I want to expand my little mining operation and add some Linux/Ubuntu machines.

I've had a terrible time getting the AMD drivers to work in Ubuntu 14.04. Ubuntu 16.04 does not support Crimson 15.12 and never will, according to what I've read.

- Are there plans to support the new AMDGPU drivers that are supported in 16.04 Ubuntu?

If anyone has a good set of instructions for bringing up a Linux machine to run Mining, I'd love to hear it. I'd even donate.

I've got $1K+ of hardware sitting idle because of this, and I'd prefer not to give Mr. Gates money for every machine I build.

Thoughts?

amdgpupro installation: http://support.amd.com/en-us/kb-articles/Pages/AMDGPU-PRO-Install.aspx

after that go for genoils ethminer: https://github.com/Genoil/cpp-ethereum/blob/master/README.md

Claymore Miner isn't working with amdgpu-pro yet.

Can't hurt. I'll give it a try. Thanks!

x201k120

newbie

Activity: 2

Merit: 0

Quote from: Tomintx on August 23, 2016, 02:10:27 AM

I've had the Claymore miner running in Windows 7 for a month, on 2 GPU's. Quite happy.

Now I want to expand my little mining operation and add some Linux/Ubuntu machines.

I've had a terrible time getting the AMD drivers to work in Ubuntu 14.04. Ubuntu 16.04 does not support Crimson 15.12 and never will, according to what I've read.

- Are there plans to support the new AMDGPU drivers that are supported in 16.04 Ubuntu?

If anyone has a good set of instructions for bringing up a Linux machine to run Mining, I'd love to hear it. I'd even donate.

I've got $1K+ of hardware sitting idle because of this, and I'd prefer not to give Mr. Gates money for every machine I build.

Thoughts?

amdgpupro installation: http://support.amd.com/en-us/kb-articles/Pages/AMDGPU-PRO-Install.aspx

after that go for genoils ethminer: https://github.com/Genoil/cpp-ethereum/blob/master/README.md

Claymore Miner isn't working with amdgpu-pro yet.

thevictimofuktyranny

legendary

Activity: 1092

Merit: 1004

Made a Thread for all the Optimisations for Dual mining with Claymore Miner for ETH:

https://bitcointalksearch.org/topic/m.16010443

Tomintx

member

Activity: 69

Merit: 10

I've had the Claymore miner running in Windows 7 for a month, on 2 GPU's. Quite happy.

Now I want to expand my little mining operation and add some Linux/Ubuntu machines.

I've had a terrible time getting the AMD drivers to work in Ubuntu 14.04. Ubuntu 16.04 does not support Crimson 15.12 and never will, according to what I've read.

- Are there plans to support the new AMDGPU drivers that are supported in 16.04 Ubuntu?

If anyone has a good set of instructions for bringing up a Linux machine to run Mining, I'd love to hear it. I'd even donate.

I've got $1K+ of hardware sitting idle because of this, and I'd prefer not to give Mr. Gates money for every machine I build.

Thoughts?

z0n0

legendary

Activity: 1274

Merit: 1006

Quote from: Gagana on August 23, 2016, 01:37:53 AM

Quote from: z0n0 on August 22, 2016, 11:24:06 PM

Does any of you guys with R9 290 (Gigabyte) get ridiculous high temps?
Mine goes above 90C with fans at 100% :/ (default clocks).
It throttles a lot obviously.

Any idea how to solve this?

Check Core Voltage in MSI Afterburner.
Check fans really work.
Relax and return it to store, because it can be the chip degradation. And it cannot be fixed then. Only refund or change. I have got an MSI card with symptoms like yours. Unfortunately, it is from a flee market.

Fans work, checked voltage...
Problem is I bought it second hand used, no return possible Sad

EDIT: -li does help a bit, I'm losing on hash speed but at least temps are better.

Thanks anyway.

Gagana

member

Activity: 80

Merit: 10

Quote from: z0n0 on August 22, 2016, 11:24:06 PM

Does any of you guys with R9 290 (Gigabyte) get ridiculous high temps?
Mine goes above 90C with fans at 100% :/ (default clocks).
It throttles a lot obviously.

Any idea how to solve this?

Check Core Voltage in MSI Afterburner.
Check fans really work.
Relax and return it to store, because it can be the chip degradation. And it cannot be fixed then. Only refund or change. I have got an MSI card with symptoms like yours. Unfortunately, it is from a flee market.

thevictimofuktyranny

legendary

Activity: 1092

Merit: 1004

Quote from: weenston on August 23, 2016, 12:43:35 AM

I'm running Claymore 6.2 on Windows 10 (WMDD 2.1), GTX 970 with CUDA 6.5 and 347.52 driver. My hashrate for ETH is 4.3 and 172 Mh/s for Sia. I've tried a couple of different drivers but they usually all result in low hash rates. Anything else I can do aside from installing Windows 7?

Try these drivers, I not sure if they work on 970's, mainly for 1070's and 980's

Follow the readme file, you need to swap an Nvidia file are extracting drivers to the C drive on Windows

Release by Claymore:

https://drive.google.com/drive/folders/0B69wv2iqszefQVRfOEhWS0FCdUE

weenston

newbie

Activity: 3

Merit: 0

I'm running Claymore 6.2 on Windows 10 (WMDD 2.1), GTX 970 with CUDA 6.5 and 347.52 driver. My hashrate for ETH is 4.3 and 172 Mh/s for Sia. I've tried a couple of different drivers but they usually all result in low hash rates. Anything else I can do aside from installing Windows 7?

wpsd

newbie

Activity: 41

Merit: 0

z0n0

legendary

Activity: 1274

Merit: 1006

Does any of you guys with R9 290 (Gigabyte) get ridiculous high temps?
Mine goes above 90C with fans at 100% :/ (default clocks).
It throttles a lot obviously.

Any idea how to solve this?

adamvp

hero member

Activity: 1246

Merit: 708

Quote from: osram64 on August 22, 2016, 05:05:33 PM

Using Ver 5.1, dual mining ETH + DCR I am getting annoying behavior on one of my rigs. Would like to know what these lines mean:

04:57:27:598   f10   OC v5, Reset control for GPU 12, close miner right now if you want to use default control from Catalyst
04:57:28:927   abc   recv: 51
04:57:28:927   abc   srv pck: 50
04:57:28:942   abc   OC v5, Reset control for GPU 12, close miner right now if you want to use default control from Catalyst
04:57:28:958   abc   srv bs: 0

04:59:56:442   f10   WATCHDOG: GPU 0 hangs in OpenCL call, exit
04:59:56:442   f10   watchdog - thread 2, hb time 219
04:59:56:442   f10   watchdog - thread 3, hb time 47
04:59:56:442   f10   watchdog - thread 4, hb time 250
04:59:56:442   f10   watchdog - thread 5, hb time 63
04:59:56:458   f10   watchdog - thread 6, hb time 79
04:59:56:458   f10   watchdog - thread 7, hb time 250
04:59:57:473   f10   Restarting OK, exit...

Of 7 rigs, this one is constantly restarting the miner every 4 to 5 min.
This is not a power issue or faulty riser, I'd like to understand more the log file.
Claymore? Can you help?
GPU are not overclocked, running at stock speed.
All my rigs are on Win 10 Pro, 15.2 AMD drivers, This rig is AMD FX6200 16gb Ram

Cheers,
Franco

Try to look for "

Code:

[GPU #0] got incorrect share. If you see this warning often, make sure you did not overclock it too much!

(Let's press ctrl+f in notepad and just paste "incorrect")

I have similiar problems as you(my rigs works few hours not minutes...) :

Code:

21:36:11:765	1178	args: -dbg 1 -tt 74,74,74 -ttdcr 79 -fanmax 95 -dcoin sia 
21:36:11:, 765	1178	
21:36:11:765	1178	ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
21:36:11:765	1178	ş        Claymore's Dual ETH + DCR/SC GPU Miner v6.2 Beta        ş
21:36:11:765	1178	ČÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍĽ
21:36:11:765	1178	
21:36:11:984	1178	ETH: 2 pools are specified
21:36:11:984	1178	Main Ethereum pool is eth.coinmine.pl:4000
21:36:11:984	1178	SC: 4 pools are specified
21:36:11:984	1178	Main Siacoin pool is sia-eu1.nanopool.org:7777
21:36:12:624	1178	OpenCL platform: AMD Accelerated Parallel Processing
21:36:12:624	1178	OpenCL initializing...

21:36:12:624	1178	AMD Cards available: 3 
21:36:12:624	1178	GPU #0: Pitcairn, 2048 MB available, 16 compute units
21:36:12:624	1178	GPU #1: Tahiti, 3072 MB available, 32 compute units
21:36:12:624	1178	GPU #1 recognized as Radeon 280X/380X
21:36:12:624	1178	GPU #2: Pitcairn, 2048 MB available, 16 compute units
21:36:12:624	1178	POOL/SOLO version
21:36:12:624	1178	b210 
21:36:12:640	1178	start building OpenCL program...
21:36:22:156	1178	done
21:36:22:156	1178	GPU #0: set -etha as 1 (ETH algo for slow cards)
21:36:22:156	1178	GPU #1: set -etha as 0 (ETH algo for fast cards)
21:36:22:156	1178	GPU #2: set -etha as 1 (ETH algo for slow cards)
21:36:22:156	1178	cudaGetDeviceCount failed (35, CUDA driver version is insufficient for CUDA runtime version), probably no CUDA devices
21:36:22:156	1178	No NVIDIA CUDA GPUs detected.
21:36:22:156	1178	Total cards: 3 
21:36:22:265	e8c	ETH: Stratum - connecting to 'eth.coinmine.pl' <139.162.173.166> port 4000
21:36:22:327	1178	DUAL MINING MODE ENABLED: ETHEREUM+SIACOIN

21:36:22:327	1178	ETH: miner-proxy stratum mode
21:36:22:327	1178	Watchdog enabled
21:36:22:327	1178	Remote management is enabled on port 3333
21:36:22:327	1178	

21:36:22:359	e8c	send: {"id": 1, "method": "mining.subscribe", "params": []}

21:36:22:359	e8c	send: {"id": 2, "method": "mining.authorize", "params": ["5adamvp.1","x"]}

21:36:22:359	e8c	ETH: Stratum - Connected (eth.coinmine.pl:4000)
21:36:22:390	e80	 SC: Stratum - connecting to 'sia-eu1.nanopool.org' <185.71.66.31> port 7777
21:36:22:468	e8c	got 100 bytes
21:36:22:468	e8c	buf: {"error":null,"id":1,"result":[["mining.notify","deadbeefcafebabe9a28040000000000"],"7fff9d76",10]}

21:36:22:468	e8c	parse packet: 99
21:36:22:468	e8c	new buf size: 0
21:36:22:468	e80	send: {"id": 1, "method": "mining.subscribe", "params": []}

21:36:22:468	e80	send: {"id": 2, "method": "mining.authorize", "params": ["3bfc04fdd58075e87f2995806067885b5e95ebda8c5cacdf795cabd890b52ab7f18cb5f9aa83/eu1sia/[email protected]","x"]}

21:36:22:468	e80	 SC: Stratum - Connected (sia-eu1.nanopool.org:7777)
21:36:22:609	e8c	got 378 bytes
21:36:22:609	e8c	buf: {"id":null,"method":"mining.set_difficulty","params":[50]}
{"id":null,"method":"mining.notify","params":["c9db","0xd56f859c6f1183af75dfdc3a616a81f76f01d7cbb0efa7e0a40cfd5cf485e5e3","0xef86c183c51ed4fb2d1a7eec0a752fb2eeb1731d33ae58cb9bfe54880af23e7b","0x00000002dd01fc067918c87bb22ae2da831babaff47cc1f55b39398a682631f0",true]}
{"jsonrpc":"2:0","id":2,"result":true,"error":null}

21:36:22:609	e8c	parse packet: 58
21:36:22:609	e8c	remove first packet 319
21:36:22:609	e8c	new buf size: 319
21:36:22:609	e8c	parse packet: 266
21:36:22:609	e8c	eth: job changed
21:36:22:609	e8c	remove first packet 52
21:36:22:609	e8c	new buf size: 52
21:36:22:609	e8c	parse packet: 51
21:36:22:609	e8c	ETH: Authorized
21:36:22:609	e8c	new buf size: 0
21:36:22:734	348	Setting DAG epoch #70...
21:36:22:827	e80	got 377 bytes
21:36:22:827	e80	buf: {"jsonrpc":"2.0","id":1,"result":true}
{"id":6,"jsonrpc":"2.0","params":["0","0x00000000000005be705af909145515803abcf9ab0cc7c778e4bd5adf07eec71a00000000000000003154bb5700000000e1e0947b54e6c673d4449a980e1324a25859f1836fd3f34bb53a3eae3bb849a5","0x0000000015fd7fe17964955fdef1ed34a2a73ae91e5fe71947db5116127c069e"],"method":"mining.notify"}
{"jsonrpc":"2.0","id":2,"result":true}

ddddddddd
21:38:54:062	1178	watchdog - thread 2, hb time 172
21:38:54:062	1178	watchdog - thread 3, hb time 0
21:38:54:062	1178	watchdog - thread 4, hb time 156
21:38:54:062	1178	watchdog - thread 5, hb time 16
21:38:56:531	e80	got 299 bytes
21:38:56:531	e80	buf: {"id":6,"jsonrpc":"2.0","params":["4","0x00000000000004e97159d865d8ce5f987ed33070aa12ab6ab4d39e046b66ad590000000000000000da54bb570000000041ff38b3641ff3662c2d84f8dc97bb008849f8f6e43b17ad414b050cdb23d98f","0x0000000015fd7fe17964955fdef1ed34a2a73ae91e5fe71947db5116127c069e"],"method":"mining.notify"}

21:38:56:531	e80	parse packet: 298
21:38:56:531	e80	sc: job changed
21:38:56:531	e80	new buf size: 0
21:38:56:531	e80	 SC: 08/22/16-21:38:56 - New job from sia-eu1.nanopool.org:7777
21:38:56:531	e80	target: 0x0000000015fd7fe1 (diff: 50GH)
21:38:57:078	1178	GPU 0 temp = 69, old fan speed = 66%, new fan speed = 64% 

cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"],"jsonrpc":"2.0","id":3}


21:52:32:905	654	parse packet: 242
21:52:32:908	654	eth: job is the same
21:52:32:910	654	new buf size: 0
21:52:35:173	654	DevFee: stop mining and disconnect
21:52:35:296	1178	GPU 0 temp = 72, old fan speed = 54%, new fan speed = 54% 

21:52:35:301	1178	Got incorrect temperature 511, ignore
21:52:35:304	1178	GPU 12 temp = 72, old fan speed = 45%, new fan speed = 45% 

21:52:35:321	1178	Got incorrect temperature 511, ignore
21:52:35:333	1178	GPU0 t=72C fan=54%, GPU1 t=0C fan=0%, GPU2 t=71C fan=45%
21:52:35:341	1178	em hbt: 0, dm hbt: 0, fm hbt: 172, 
21:52:35:343	1178	watchdog - thread 0, hb time 31718
21:52:35:350	1178	watchdog - thread 1, hb time 36703
21:52:35:362	1178	watchdog - thread 2, hb time 140
21:52:35:364	1178	watchdog - thread 3, hb time 328
21:52:35:366	1178	watchdog - thread 4, hb time 172
21:52:35:380	1178	watchdog - thread 5, hb time 31
21:52:35:684	141c	ETH: put share nonce 7458b0b0001cc934
21:52:35:685	141c	ETH round found 1 shares
21:52:35:687	e8c	ETH: 08/22/16-21:52:35 - SHARE FOUND - (GPU 2)
21:52:35:688	e8c	send: {"id": 4, "method": "mining.submit", "params": ["5adamvp.1","ca35","0x7458b0b0001cc934","0xd943ea7503e1ca7f9edf92be62154ba1e8f65d5e19540d3845427ec331a2239b","0xead3e404ddb054b0c65a210252fb39e7100ff3aa4d07c8c25275b6bdb8fbda16"]}

21:52:35:807	e8c	got 36 bytes
21:52:35:836	e8c	buf: {"id":4,"result":true,"error":null}

21:52:35:841	e8c	parse packet: 35
21:52:35:844	e8c	ETH: Share accepted (156 ms)!

21:52:35:847	e8c	new buf size: 0
21:52:38:403	1178	GPU 0 temp = 71, old fan speed = 54%, new fan speed = 54% 

21:52:38:409	1178	Got incorrect temperature 511, ignore
21:52:38:413	1178	GPU 12 temp = 72, old fan speed = 45%, new fan speed = 45% 

21:52:41:442	1178	GPU 0 temp = 71, old fan speed = 54%, new fan speed = 54% 

21:52:41:449	1178	Got incorrect temperature 511, ignore
21:52:41:453	1178	GPU 12 temp = 72, old fan speed = 45%, new fan speed = 45% 

21:52:43:380	e8c	send: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x1ac3a22", "0x00000000000000000000000000000000000000000000000000000000424c357c"]}

21:52:43:468	e8c	got 44 bytes
21:52:43:469	e8c	buf: {"jsonrpc":"2:0","id":null,"result":"True"}

21:52:43:469	e8c	parse packet: 43
21:52:43:470	e8c	new buf size: 0
21:52:44:489	1178	GPU 0 temp = 72, old fan speed = 54%, new fan speed = 54% 

21:52:44:536	1178	Got incorrect temperature 511, ignore
21:52:44:552	1178	GPU 12 temp = 70, old fan speed = 45%, new fan speed = 44% 

21:52:47:570	1178	GPU 0 temp = 72, old fan speed = 54%, new fan speed = 54% 

21:52:47:574	1178	Got incorrect temperature 511, ignore
21:52:47:577	1178	GPU 12 temp = 70, old fan speed = 44%, new fan speed = 43% 

21:52:50:620	1178	GPU 0 temp = 72, old fan speed = 54%, new fan speed = 54% 

21:52:50:641	1178	Got incorrect temperature 511, ignore
21:52:50:644	1178	GPU 12 temp = 72, old fan speed = 43%, new fan speed = 43% 

21:52:53:664	1178	GPU 0 temp = 71, old fan speed = 54%, new fan speed = 54% 

21:52:53:669	1178	Got incorrect temperature 511, ignore
21:52:53:677	1178	GPU 12 temp = 71, old fan speed = 43%, new fan speed = 43% 

21:52:55:332	e8c	got 267 bytes
21:52:55:332	e8c	buf: {"id":null,"method":"mining.notify","params":["ca36","0x7f2e0ff7dfadc06289f4293c418e674e8856e78f5371eef2f8212305544d8ca3","0xef86c183c51ed4fb2d1a7eec0a752fb2eeb1731d33ae58cb9bfe54880af23e7b","0x00000002dd01fc067918c87bb22ae2da831babaff47cc1f55b39398a682631f0",true]}

21:52:55:333	e8c	parse packet: 266
21:52:55:334	e8c	eth: job changed
21:52:55:335	e8c	new buf size: 0
21:52:55:336	e8c	ETH: 08/22/16-21:52:55 - New job from eth.coinmine.pl:4000
21:52:55:338	e8c	target: 0x00000002dd01fc06 (diff: 1500MH), epoch #70
21:52:55:341	e8c	ETH - Total Speed: 28.524 Mh/s, Total Shares: 22, Rejected: 0, Time: 00:16
21:52:55:345	e8c	ETH: GPU0 0.000 Mh/s, GPU1 17.279 Mh/s, GPU2 11.245 Mh/s
21:52:55:367	e8c	 SC - Total Speed: 427.856 Mh/s, Total Shares: 12, Rejected: 0
21:52:55:370	e8c	 SC: GPU0 0.000 Mh/s, GPU1 259.189 Mh/s, GPU2 168.667 Mh/s
21:52:56:717	1178	GPU 0 temp = 71, old fan speed = 54%, new fan speed = 54% 

21:52:56:763	1178	Got incorrect temperature 511, ignore
21:52:56:772	1178	GPU 12 temp = 70, old fan speed = 43%, new fan speed = 42% 

21:52:59:798	1178	GPU 0 temp = 70, old fan speed = 54%, new fan speed = 53% 

21:52:59:803	1178	Got incorrect temperature 511, ignore
21:52:59:806	1178	GPU 12 temp = 70, old fan speed = 42%, new fan speed = 41% 

21:53:02:824	1178	GPU 0 temp = 70, old fan speed = 53%, new fan speed = 52% 

21:53:02:828	1178	Got incorrect temperature 511, ignore
21:53:02:831	1178	GPU 12 temp = 69, old fan speed = 41%, new fan speed = 39% 

21:53:03:414	e8c	send: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x1378863", "0x00000000000000000000000000000000000000000000000000000000424c357c"]}

21:53:03:518	e8c	got 44 bytes
21:53:03:518	e8c	buf: {"jsonrpc":"2:0","id":null,"result":"True"}

21:53:03:519	e8c	parse packet: 43
21:53:03:520	e8c	new buf size: 0
21:53:05:861	1178	GPU 0 temp = 71, old fan speed = 52%, new fan speed = 52% 

21:53:05:902	1178	Got incorrect temperature 511, ignore
21:53:05:921	1178	GPU 12 temp = 70, old fan speed = 39%, new fan speed = 38% 

21:53:05:937	1178	Got incorrect temperature 511, ignore
21:53:05:942	1178	GPU0 t=71C fan=52%, GPU1 t=0C fan=0%, GPU2 t=70C fan=38%
21:53:05:943	1178	em hbt: 0, dm hbt: 0, fm hbt: 47, 
21:53:05:944	1178	watchdog - thread 0, hb time 62328
21:53:05:945	1178	WATCHDOG: GPU 0 hangs in OpenCL call, exit
21:53:05:946	1178	watchdog - thread 1, hb time 67313
21:53:05:947	1178	WATCHDOG: GPU 0 hangs in OpenCL call, exit
21:53:05:948	1178	watchdog - thread 2, hb time 219
21:53:05:949	1178	watchdog - thread 3, hb time 32
21:53:05:950	1178	watchdog - thread 4, hb time 32
21:53:05:951	1178	watchdog - thread 5, hb time 203
21:53:06:959	1178	Restarting OK, exit...

Yesterday I guess it was pool - related... because it happend when sia.nanopool stoped working, but one of my cards is a little faulty as you can see..
In event viewer I can saw:
Display driver amdkmdap stoped responding, but recover stability (but after that my miner hangs so I had to make hard reset)
.I
look further in my log and I wonder what it is:

Code:

  
21:53:05:902	1178	Got incorrect temperature 511, ignore
21:

Another strange thing is that works better before I upgraded to 6.2...
Can you give us any help Claymore?
*eth only mode seems to work ok..

YIz

hero member

Activity: 686

Merit: 502

Anyone knows what to expect from a 290 Tri-X running at 1.1GHz?

CryptoBitSeeker

newbie

Activity: 1

Merit: 0

Claymore - what do I need to change on my Stratum Server to satisfy your miner.

I've been playing with Sammy007's pool software and testing a few simple things.

When I choose your miner, it barks about a local pool or solo miner...what gives?

Thanks!

mikhan

member

Activity: 84

Merit: 10

i got 16.2eth+250sia on 280 (not X), 1100/1350 core/mem
friend's 7970s give about 17-18

Cryptozillah

hero member

Activity: 687

Merit: 502

What ETH hashrate are 7970 and 280x cards produce these days ?
I found some old hw laying around today and got hem running in a hurry right before my nightshift.

Driver: 15.12
OS: Win 8.1

Using:
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal ETHADRESS.WORKER -epsw x -allcoins 1

I get:
7970: 17.5Mhs
280x: 15.8Mhs
@stock clocks.

Overclcocking memory does not seem to have any hash increase on any of the cards using afterburner.

The cards should do over 20Mhs on ETH right ?

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1156. (Read 6590757 times)