Hi, is anyone else having an issue with the new versions (6.0 and 6.1) not detecting all cards for temp monitoring?
One of my rigs has 2 x 480x cards (plugged straight into 16x slots on the mainboard).
Rig is mining fine on both cards, but the temp is monitored for only one card. Both cards are detected fine in windows (10), and also in wattman (I can control them in wattman fine), and behave otherwise as you would expect, but one is refusing to show its temp in the miner.
Nothing odd in the logfile, apart from the lack of temp from GPU1 :
21:11:33:748 11e8 GPU #0: Ellesmere, 8192 MB available, 36 compute units
21:11:33:763 11e8 GPU #1: Ellesmere, 8192 MB available, 36 compute units
21:11:33:779 11e8 ETH - Total Speed: 50.334 Mh/s, Total Shares: 4, Rejected: 0, Time: 00:01
21:11:33:779 11e8 ETH: GPU0 25.477 Mh/s, GPU1 24.857 Mh/s
21:11:33:779 11e8 Incorrect ETH shares: none
21:11:33:779 11e8 Pool switches: ETH - 0, SC - 0
21:11:33:779 11e8 Current ETH share target: 0x0000000556f9b3f0 (diff: 804MH), epoch #69
21:11:33:794 11e8 GPU0 t=62C fan=57%
Any ideas? (incidentally powerlimit is set low for the moment, so hashrate is a little down on normal)
I have another rig mining happily with 5 x 480's, all their temps detect fine with 6.0 and 6.1.
I have tried using -gser 2 without success.
Thanks in advance.
Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1167. (Read 6590565 times)
August 17, 2016, 07:27:33 AM
August 17, 2016, 06:32:57 AM
I have Nvidia 2Gb card
it's unable to load a DAG with dualminer v.6.0
will it's be fixed, or better to forgot about?
Thank you.
it's unable to load a DAG with dualminer v.6.0
will it's be fixed, or better to forgot about?
Thank you.
August 17, 2016, 06:20:22 AM
on 6.1.3, after starting my fans resets to autospeed, but if I set the option -tt 0 I can`t keep track of temperatures
Try this:
https://mega.nz/#!HphjhRyI!ynSMiXk4NfNWsLbjmD03noY93Zk5mboCq1UacB-S570
Excellent !!! everything is working
August 17, 2016, 06:09:23 AM
on 6.1.3, after starting my fans resets to autospeed, but if I set the option -tt 0 I can`t keep track of temperatures
Try this:
https://mega.nz/#!HphjhRyI!ynSMiXk4NfNWsLbjmD03noY93Zk5mboCq1UacB-S570
August 17, 2016, 06:02:04 AM
It works for me also. Exactly speed like genoil 21 mhs with 1080 MSI (Win 7x64, 372.54). CPU load is ok.
Previously, I used version 5.3 and MSI AF for speed control and overclocking,
"timeout /t 60
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool http://185.86.79.245:8545 -mode 1 -ethi 16 -esm 1 -tstop 89 -gser 1"
on 6.1.3, after starting my fans resets to autospeed, but if I set the option -tt 0 I can`t keep track of temperatures
August 17, 2016, 05:56:53 AM
FWIW, I just tried using a fixed fan speed with -ttli and it solves the flapping issue I mentioned earlier. About the only downside to this is that some cards are 'wasting' power at fan speeds that are higher than they need, but really not that big a deal.
For those interested in trying it, I basically set the fan speed to a fixed 80% of max:
-tt -80
And then an a intensity target of 70c:
-ttli 70
For those interested in trying it, I basically set the fan speed to a fixed 80% of max:
-tt -80
And then an a intensity target of 70c:
-ttli 70
August 17, 2016, 05:51:53 AM
It works for me also. Exactly speed like genoil 21 mhs with 1080 MSI (Win 7x64, 372.54). CPU load is ok.
3 GTX 970 works fine too with exactly CPU load like genoil and maybe a bit less. Thank you.
3 GTX 970 works fine too with exactly CPU load like genoil and maybe a bit less. Thank you.
August 17, 2016, 05:43:11 AM
Thanks It works !!!! 
But now I have a fan speed control problem
But now I have a fan speed control problem
It's a good idea to tell me more details if you want some help. And PM me the log file.
August 17, 2016, 05:30:53 AM
Hi, I tried the version 6.1b2, it does not work with PARITY
6.1beta2 shows this
This must work, let me know if it works for you:
https://mega.nz/#!vgpgkKCS!Zj_MMGh4axSBCIpNzJ9wbb1a75mZ-Tu7GZdXEHZzIsI
Thanks It works !!!!
But now I have a fan speed control problem
August 17, 2016, 05:10:27 AM
I cant do dual mining with siacoin.
Here is my Config:
-epool us1.ethermine.org:4444
-ewal 0x7f644a86ebf47309616ae93401aa05640aebdc7a
-epsw x
-dpool stratum+tcp://siamining.com:7777
-dwal 30d7afa7d36bf9345be342d9a93dd60375caaaf40eedf45ab4ef7988c4b1f77ae06568bb394d
-dpsw x
-esm 1
-mode 0
-tt 70
-eworker JoRen07
-dcri 30
-ethi 4
-dcoin sia
Anything i missed why i couldnt dual mine?
Thanks in advance!
Here is my Config:
-epool us1.ethermine.org:4444
-ewal 0x7f644a86ebf47309616ae93401aa05640aebdc7a
-epsw x
-dpool stratum+tcp://siamining.com:7777
-dwal 30d7afa7d36bf9345be342d9a93dd60375caaaf40eedf45ab4ef7988c4b1f77ae06568bb394d
-dpsw x
-esm 1
-mode 0
-tt 70
-eworker JoRen07
-dcri 30
-ethi 4
-dcoin sia
Anything i missed why i couldnt dual mine?
Thanks in advance!
August 17, 2016, 04:57:29 AM
Hi, I tried the version 6.1b2, it does not work with PARITY
6.1beta2 shows this
This must work, let me know if it works for you:
https://mega.nz/#!vgpgkKCS!Zj_MMGh4axSBCIpNzJ9wbb1a75mZ-Tu7GZdXEHZzIsI
August 17, 2016, 03:33:58 AM
Has anyone tried changing clocks and power limit in Ubuntu? Can you lower the power consumption in Ubuntu, using -powlim or it doesn't work? So far I haven't seen a software that can change graphics card's power consumption in Linux.
August 17, 2016, 03:26:42 AM
Hello, I need an answer! Is AMD Catalyst required to mine with Ubuntu? I just downloaded the latest AMD drivers and it's mining well... Do I also need the catalyst?
NO its not nesesary
August 17, 2016, 03:08:03 AM
Hello, I need an answer! Is AMD Catalyst required to mine with Ubuntu? I just downloaded the latest AMD drivers and it's mining well... Do I also need the catalyst?
August 17, 2016, 02:26:39 AM
Code:
**** with Claymore's Dual Miner
2016-08-15 10:25:09 TRACE rpc Request: {"method": "eth_getWork", "params": [], "id":0}
2016-08-15 10:25:09 DEBUG rpc Response: Some("{\"jsonrpc\":\"2.0\",\"error\":{\"code\":-32600,\"message\":\"Invalid request\",\"data\":null},\"id\":null}")
2016-08-15 10:25:10 TRACE rpc Request: {"method": "eth_getWork", "params": [], "id":0}
2016-08-15 10:25:10 DEBUG rpc Response: Some("{\"jsonrpc\":\"2.0\",\"error\":{\"code\":-32600,\"message\":\"Invalid request\",\"data\":null},\"id\":null}")
**** with Ethminer
2016-08-15 10:25:30 TRACE rpc Request: {"id":1,"jsonrpc":"2.0","method":"eth_getWork"}
2016-08-15 10:25:30 DEBUG rpc Response: Some("{\"jsonrpc\":\"2.0\",\"result\":[\"0xcc906703772e5e65d85abb672dc363bc91f866d7b01b61c0877c40d2edc92b49\",\"0x46862965466b5f8011ebefb35a0d1a0b7290c3ba38c11e916c74c347e00ed903\",\"0x00000000001c72ad64007a6db5d3515a0db95a130c9293553de655fde6328914\",\"0x1fa7e4\"],\"id\":1}")
2016-08-15 10:25:32 TRACE rpc Request: {"id":1,"jsonrpc":"2.0","method":"eth_getWork"}
2016-08-15 10:25:32 DEBUG rpc Response: Some("{\"jsonrpc\":\"2.0\",\"result\":[\"0xcc906703772e5e65d85abb672dc363bc91f866d7b01b61c0877c40d2edc92b49\",\"0x46862965466b5f8011ebefb35a0d1a0b7290c3ba38c11e916c74c347e00ed903\",\"0x00000000001c72ad64007a6db5d3515a0db95a130c9293553de655fde6328914\",\"0x1fa7e4\"],\"id\":1}")
2016-08-15 10:25:33 TRACE rpc Request: {"id":1,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x62f2","0x0d2d291fe73cba1bfc69c5605a3d3e0af93a2f8c7d210d53cb4c1c263cd3d525"]}
Technically, RPC command in Claymore's Dual Miner is not an issue.
Actually, I have tested with RPC command windows in the parity UI, this command is working well.
but, with Miner, it shows as the error.
I feel as some kind of line termination code error ? or something, strange error has been happening,
Headers are not displayed here.. The Content-Type needs to be set, as already mentioned before
Thank you for your comment,
I have missed your post which has made before,
Thank you.
Ok, I changed requests a bit, please test this build:
https://mega.nz/#!6kJ0lLrD!OVklt9Rxq4ernAMi39CrzPEck_OmngItQVdzKb-067k
Hi, I tried the version 6.1b2, it does not work with PARITY
you can connect to my solo node and try its synced and work whis genoil,or if you want I can give full access to the my VPS ....ip node http://185.86.79.245:8545
August 17, 2016, 01:48:48 AM
I have a small problem/question.
I just started mining for the first time, and on Ubuntu. When I run the miner, it says "ADL not found!" but keeps mining normally. What does that error msg mean and how do I fix it?
I just started mining for the first time, and on Ubuntu. When I run the miner, it says "ADL not found!" but keeps mining normally. What does that error msg mean and how do I fix it?
August 17, 2016, 01:47:07 AM
v6 haves some pretty nice features. Controlling fans, overclocking, target temperatures and mining intensity, I just love it. Keep up the good work.
I would like to see some improvements on the remote manager as well, like changing -dcri and some sort of security, so that others can't get access.
I would like to see some improvements on the remote manager as well, like changing -dcri and some sort of security, so that others can't get access.
August 17, 2016, 12:39:25 AM
MSI GTX 1070 getting 27MH/s with DaggerHashimoto and 0.38 GH/s with Decreed dual mining
is this good?
is this good?
whats the power usage, it seems 480s are a lot more power efficient dual mining than 1070s which is shame becase you can barely find any 480s for sale
August 17, 2016, 12:16:19 AM
New 372.54 Nvidia drivers released today. No fix for maxwell win 10 poor eth performance unfortunately......
Tested here too, same hashrate still.
Claymore, can you please work this out?
Would be nice if besides our AMD rig, we could use your miner on our Nvidia one too.
The problem is not in the miner. The problem is in nvidia drivers. You have to use old drivers on Win10, new drivers don't work as they must do. But old drivers don't support cuda 7.5 which is used by the miner. So I have to release at least two versions of miner - for cuda 7.5 and for cuda 6.5. It's annoying, especially because I see less hashrate on cuda 6.5.
@claymore. Still locks up with rx470. This round made it 10hr 42 min. Always locks up on the Dev fee switch at random times of course. Opencl hang. Have to shut computer down with power switch anytime this miner hangs which I feel is odd. The graphics card I am using for monitor isn't the rx470. Not sure what can be done but looks like I'll go back to genoil. That miner doesn't have any loss in hash rate over 24hr and it just works. Claymore can you do something like genoil where you can throw the opencl.dll into same directory as miner and it use that instead. Seems to do the trick.
Best Regards
d57heinz
If you think that the problem is in drivers you can place driver files to the folder with miner. But it seems you mine not ETH and not EXP, so miner has to rebuild DAG every time and I don't see any ways to fix it if it hangs on your system. Perhaps you really need different miner for your coin.
I have mutiple versions of 470 cards , MSI, XFX, and a few Saphire OC cards all 4GB and they all work flawlessley with Calymore not the latest version the last one.
version of miner or display driver.. IM on 16.8.2 hotfix and v6cdm.. Couldnt get last version to work either. Could you give some more info on your command line setup.. Are you serializing? or using a different intensity by chance. TIA
Could be that its due to being a mix in my system of old and new.. I got a new msi mobo today with 7 pcie so i will start that build off with the rx470 by itself to eliminate any issue my home pc may have Thanks for letting me know that at least someone is having a good exp with the miner and the new amd cards. gives me hope. Now i just have to figure out why genoil works and this one dont. I let genoil run for 4 days and it never glitched. hmmmm
Best Regards
d57heinz
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eth-us-west1.nanopool.org:9999 -ewal xxxxxxxxxxxxxxxxxxxxxxxxxxxx/Marvell9.57/[email protected] -allpools 1 -allcoins 1 -dpool stratum+tcp://sia-us-west1.nanopool.org:7777 -dwal xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx/Marvell9.57/[email protected] -dcoin sia -dcri 40 -tt 75
that's what I'm using for my 470s
the 8GB card arrived today and it gets 23mhs stock vs the 20 mhs stock on the 4 gig cards
I also installed the hotfix 16.8.2 over 7.3 and it fixed the issue with upping mem freq over 1700 , all 470s can get to 2050 mem now
Right now I upped the mem to 1750 for all cards and the 8 gig card gets to 24 mhs eth and 467 sia , all the 4 GB cards arfe 21.2 and 427 sia.
I think I could get these cards way higer with a custom bios though all in all they are decent cards with no 480s in stock
August 16, 2016, 10:45:41 PM
Back to genoil, cause 6.1 not work for me and 6.0 is waste my electricity.
You mine ETH solo? Not with Parity? Because I got reports about problems with Parity, I changed requests a bit in v6.1, it could cause problems with older version. Changed it to original version, please try this:
https://mega.nz/#!r8IWGIZS!zHiYJ0N2Ywes6ReWoe-VWjMmDCiIfmUGrDInB2nDtJE
Linked with cuda 7.5, just copy .exe it to main miner folder.
No, with geth 1.4.9 for ETC and 1.4.10 for ETH.
6.1beta2 shows this
Code:
ETH: Received error: {"jsonrpc":"2.0","error":{"code":-32700,"message":"json: ca
nnot unmarshal string into Go value of type rpc.JSONRequest"}}Jump to: