Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1230. (Read 6590565 times)
July 10, 2016, 11:10:51 PM
How profitable is mining Siacoin, comparing to Decred? Any information....
July 10, 2016, 10:18:58 PM
Someone please help! When I try to mine with RX480, the miner crashes. A have 3 card - 2x270X and 1xRX480. If i try to mine with only 270X, there is no problem, but if I try to mine with all 3 or just with the polaris - the miner crashes. I post last rows from log file:
01:40:59:271 d20 Total cards: 3
01:40:59:287 d20 Initializing...
01:40:59:303 d20 GPU #0 recognized as Radeon RX 480
01:40:59:303 d20 GPU #1 recognized as Radeon 270/270X
01:40:59:318 d20 GPU #2 recognized as Radeon 270/270X
01:40:59:318 d20 POOL/SOLO version
01:40:59:318 d20 b167
01:40:59:350 d20 start building OpenCL program...
I don't know what happened, I was mining with RX480 for 1 day, but then I try some intensity changes and after all I cannot mine with RX480 anymore...
01:40:59:271 d20 Total cards: 3
01:40:59:287 d20 Initializing...
01:40:59:303 d20 GPU #0 recognized as Radeon RX 480
01:40:59:303 d20 GPU #1 recognized as Radeon 270/270X
01:40:59:318 d20 GPU #2 recognized as Radeon 270/270X
01:40:59:318 d20 POOL/SOLO version
01:40:59:318 d20 b167
01:40:59:350 d20 start building OpenCL program...
I don't know what happened, I was mining with RX480 for 1 day, but then I try some intensity changes and after all I cannot mine with RX480 anymore...
Claymore, please help. I reinstall Windows and no change, still can't mine. ;(
same problem here with 2x 7970 and one rx480, something to do with opencl, anyone having the same issue ??
July 10, 2016, 10:14:45 PM
Anyway to add worker name to Claymore? Seems to work with GOminer
"address=YOUR_WALLET_ADDRESS&worker=YOUR_WORKER_NAME&email=YOUR_EMAIL"
-edit- copypaste from nanopool help
Thanks works only in config.txt however, not in the bat file
After much testing if you have any Tahiti based cards like 7950/7970/280x , you should just mine SIA directly. You will make almost double over ETH.
Pitcairn or Hawaii based cards like 270x,370,290 and the results aren't as good.
However it uses about 25% more power to mine SIA than ETH.
Pitcairn or Hawaii based cards like 270x,370,290 and the results aren't as good.
However it uses about 25% more power to mine SIA than ETH.
what speeds are you getting with those Tahitis? Can you mine only SIA with claymore´s?
7970/280x get 900MH/s
I think anyone claiming to make more on sia alone rather than mining ether has their calculations wrong. Also the only interest in sia is the fact you can dual mine it.
Probably more profitable for 1 more day until the difficulty adjusts 50%
July 10, 2016, 10:13:20 PM
Dual mining over just sia is marginal at best and then you have to take in account of the added heat and strain on the gpu's (its summer). Pretty soon the profits on sia will vanish after the next diff update and then its dual mine or eth only, maybe feathercoin.
July 10, 2016, 10:11:00 PM
It crashes at DAG creation. Usually due to overclocking or weak PSU. Also try "-gser 2" option if you have several cards like in your log.
Hey, played around with it. -gser 2 did not make a difference, but if I remove SIA minning and it works. Is there anyway to make both work?
On eth it is running no problems.
Thanks
-Art
Just started first tests with eth+sia miner, no problems with my 2x295 rig. Single 295x2 47MH eth + 1.4GH sc, 445 watts from the wall. Testing continues...
Can you give me some info on your set up please.
I got 2 2x295 with a 1325W platinum power supply. My first thought was the power, but then I tried one card and same crash.
How much ram are you running? what operating system? you should be hashing 50 - 51 (if you are hashing lower, check the temp of the card, it should be below 74 or you're throttling. Right now mine 2 are on Claymore mining eth and hashing 115 in the miner and around 95 - 115 in ethpool.
Can i see the code you use in the Start file? how did you set up your virtual memory? min/max?
Thank you
-Art
July 10, 2016, 09:22:36 PM
I think anyone claiming to make more on sia alone rather than mining ether has their calculations wrong. Also the only interest in sia is the fact you can dual mine it.
July 10, 2016, 08:53:57 PM
After much testing if you have any Tahiti based cards like 7950/7970/280x , you should just mine SIA directly. You will make almost double over ETH.
Pitcairn or Hawaii based cards like 270x,370,290 and the results aren't as good.
However it uses about 25% more power to mine SIA than ETH.
Pitcairn or Hawaii based cards like 270x,370,290 and the results aren't as good.
However it uses about 25% more power to mine SIA than ETH.
what speeds are you getting with those Tahitis? Can you mine only SIA with claymore´s?
July 10, 2016, 08:50:18 PM
Anyway to add worker name to Claymore? Seems to work with GOminer
Depends on what pool you are using? Sia.nanopool you use &worker=your_worker at the end of your address, no space. Ethermine and ethpool is .your_worker after eth address. July 10, 2016, 08:20:28 PM
Anyway to add worker name to Claymore? Seems to work with GOminer
"address=YOUR_WALLET_ADDRESS&worker=YOUR_WORKER_NAME&email=YOUR_EMAIL"
-edit- copypaste from nanopool help
July 10, 2016, 08:04:17 PM
Anyway to add worker name to Claymore? Seems to work with GOminer
July 10, 2016, 07:58:12 PM
Anyone have the syntax for nano pool and gominer?
July 10, 2016, 07:01:31 PM
What amd catalyst version is everybody using for LINUX?
I find that 15.12 results in very low hashrates about 60-70% of what I get in Windows.
I'm running Ubuntu Mate 15.10 with fglrx-15.302 (which should be 15.12) on 2 rigs and not noticing maybe 1mh drop on v5.0 dual mining. But temps do go up by 4-5 degrees. I also have 1 windows rig. I find that 15.12 results in very low hashrates about 60-70% of what I get in Windows.
July 10, 2016, 06:53:30 PM
What amd catalyst version is everybody using for LINUX?
I find that 15.12 results in very low hashrates about 60-70% of what I get in Windows.
On Linux only AMDGPU-PRO ver. 16.30 ubuntu 16.04 I find that 15.12 results in very low hashrates about 60-70% of what I get in Windows.
July 10, 2016, 06:33:15 PM
What amd catalyst version is everybody using for LINUX?
I find that 15.12 results in very low hashrates about 60-70% of what I get in Windows.
I find that 15.12 results in very low hashrates about 60-70% of what I get in Windows.
July 10, 2016, 06:14:53 PM
Hi Claymore (and other fellow miners!) love the miner however I am having an issue with one of my rigs (out of 11 - the other 10 are not doing this). This rig's actual hashrate (as determined by accepted shares to my pool) is about 25 MH/s slower than both what is reported to the pool and what is seen on the miner console. The number reported by the miner console is consistent with the number and type of cards in the rig and as close to what I get using either ehtminer or QT miner so it seems as if the 25 MH/s is just disappearing. No issues with stales or rejects it just seems to be finding less shares than what the hashrate should find and has demonstrated with other miners. This happens over long periods of time (>48 hours) so its not luck variations on shares found.
Anyone seen this issue before / have any solutions?
Anyone seen this issue before / have any solutions?
July 10, 2016, 06:04:05 PM
Who can help me
EthDcrMiner64.exe CRASHED!!!
Win 7/64 Crymson 16.7.2 RX 480
eth-proxy mode
Config:
# WARNING! Remove "#" characters to enable lines, with "#" they are disabled and will be ignored by miner! Check README for details.
# WARNING! Miner loads options from this file only if there are not any options in the command line!
-
14:26:05:048 1250 Unsupported Overdrive version 7
AND CRASH!
PLS HELP!!!!!!!!!!
I'm just guessing but your last line in log could be that your using unsupported drivers.EthDcrMiner64.exe CRASHED!!!
Win 7/64 Crymson 16.7.2 RX 480
eth-proxy mode
Config:
# WARNING! Remove "#" characters to enable lines, with "#" they are disabled and will be ignored by miner! Check README for details.
# WARNING! Miner loads options from this file only if there are not any options in the command line!
-
14:26:05:048 1250 Unsupported Overdrive version 7
AND CRASH!
PLS HELP!!!!!!!!!!
On Linux only AMDGPU-PRO ver. 16.30 ubuntu 16.04
Windows 7-10 driver version 16.20.1035.1001-160705a-304296E known as Crimson-16.7.1
In Windows7 with mem clock 2250MHz core clock def.(1290) I have 28MH/s per RX 480
Im install 16.7.1 and again miner crashed!!
BUT run default start.bat All works!!!!!!!
When im connect my eth-proxy 0.0.5 MINER CRASHED!!!!
But if connect with ethminer to eth-proxy All works!
SOMEBODY HELP!!!!!
NOW how a can correctly connect to my eth-proxy? with command-line?
?? July 10, 2016, 05:48:58 PM
@Claymore:
what does this mean in logs (I set -r 1 to reboot in case of issues):
This issue occured on both my Linux rigs at the same moment. It was repeated (rebooted) 3 times before continued mining. I also found that at the same time nanopool had hashrate drop, so it looks like some issue with the pool.
What concerns me, that an issue with the secondary coin pool resulted in reboot (restart) when it should be sufficient to restart some threads (they are not GPU/OpenCL related). Maybe makes sense to restart just miner if it is not a hardware/OpenCL issue, and reboot only when there are problems with GPU?
what does this mean in logs (I set -r 1 to reboot in case of issues):
Code:
23:13:49:189 71a94780 watchdog - dminer threads hangs
23:13:49:189 71a94780 em hbt: 1, dm hbt: 120073, fm hbt: 80,
23:13:49:189 71a94780 Miner thread hangs, need to restart miner!
23:13:49:189 71a94780 Rebooting
This issue occured on both my Linux rigs at the same moment. It was repeated (rebooted) 3 times before continued mining. I also found that at the same time nanopool had hashrate drop, so it looks like some issue with the pool.
What concerns me, that an issue with the secondary coin pool resulted in reboot (restart) when it should be sufficient to restart some threads (they are not GPU/OpenCL related). Maybe makes sense to restart just miner if it is not a hardware/OpenCL issue, and reboot only when there are problems with GPU?
July 10, 2016, 05:41:44 PM
After much testing if you have any Tahiti based cards like 7950/7970/280x , you should just mine SIA directly. You will make almost double over ETH.
Pitcairn or Hawaii based cards like 270x,370,290 and the results aren't as good.
Could you please give some numbers?Pitcairn or Hawaii based cards like 270x,370,290 and the results aren't as good.
For me ETH+SIA is more profitable at the moment than SIA only using other miner. Did not try, but assuming that SIA only gives doubled hash rate comparing to SIA hashrate in dual mode. Just because in ETH+SIA the 1st part gives more income than the 2nd. If prices change it may change too.
So what is your hash rate for SIA only (gominer), ETH+SIA (CDM), or you compared to ETH only profit (CDM)?
July 10, 2016, 05:39:57 PM
Hi all
pls help, the problem is:
sc:job timeout, disconnect, try out in
what is wrong?
Make sure your pool info is correct for Sia and it's in the right format. Post your config or command line for more help.pls help, the problem is:
sc:job timeout, disconnect, try out in
what is wrong?
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eth-ru.dwarfpool.com:8008 -ewal 0x373aed1d5f4A2e4F437A993a6300BbE243cc4a83 -eworker 49 -epsw x -dpool sia-eu1.nanopool.org:9980/miner/header?address=e0a5937aeb8fbee93fec388d3b07110e5b87d10fb61c3f16055ee9a4d1f480d02ba7eb00b66a -dcoin sia -dcri 120
You're missing http:// in your sia pool address.
-dpool http://sia-eu1.nanopool.org:9980/
July 10, 2016, 05:26:28 PM
It crashes at DAG creation. Usually due to overclocking or weak PSU. Also try "-gser 2" option if you have several cards like in your log.
Hey, played around with it. -gser 2 did not make a difference, but if I remove SIA minning and it works. Is there anyway to make both work?
On eth it is running no problems.
Thanks
-Art
Just started first tests with eth+sia miner, no problems with my 2x295 rig. Single 295x2 47MH eth + 1.4GH sc, 445 watts from the wall. Testing continues...
Jump to: