Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1302.

Walrusbonzo

hero member

Activity: 682

Merit: 500

Quote from: alpsea on May 21, 2016, 03:25:58 PM

Crashed my psu. Working dual miner ( 4.3 ) after 1 hour.
My rig: 3x R7 370 . Psu coolermaster 600w.
-
Dual miner 4.3 calistirdiktan 1saat sonra psu yandı. Tam yanma aşamasında kokudan farkettik kartları zor kurtardık. Anakart ve psu pert.
Kartlarin cektigi watt hesaplamasini dikkatli yapmak lazim. Benim gibi ucu ucuna yeten psu kullananların riski büyük.

I feel your pain, had exactly the same problem running three cards on two PCs. One of the PCs the socket started to burn and it melted the pins like yours.

Fortunately, mine still lives. Grin

polylogic

sr. member

Activity: 546

Merit: 254

ʕʘ̅͜ʘ̅ʔ

@all guys who helped me

thanks alot! i got all rigs working now with 5x gpu using config 1

@claymore:

i cannot run with a 6th gpu, as far as i found out it: has to be a error in the code
not not sure but i guess your miner is based on one of them open source miners?
maybe its their code error...

well i coulnt change ubuntu language for some reason but im pretty sure its:

Segmentation fault (core dumped)

ubuntu doesnt write core file by delaut unless you enable it with

Code:

ulimit -c unlimited

so i was able to grab the core file.
not sure if i can post it publicly.. mind if i send you a pm with it ?

ill also try and talk to the ethereum guys since it happens on all miners

one thing i could try is ubuntu 14!? im using 15.10

merc84

hero member

Activity: 799

Merit: 1000

Quote from: vapourminer on May 21, 2016, 09:46:08 AM

You're creating a feedback loop with your current setup. PSU1 needs to power MB, CPU, and All Risers. SSD or HDD may not have to be on PSU1, I have it both ways and they work fine. PSU2,3,etc need to just power the cards.

See here https://www.reddit.com/r/litecoinmining/comments/1dvit7/the_powered_riser_problem_is_there_a_hardware/c9vmjpw

just google feedback loop powered risers and you'll find more info.

Googling more just serves to add more confusion to the situation, i read here https://bitcointalksearch.org/topic/m.14700098 a user has tested powered riser and they do not draw from the 12v supplied to the mb, therefore powering the risers and pcie from the 2nd psu should not cause mixing of the 12v from both psu.

adamvp

hero member

Activity: 1246

Merit: 708

to the power consumption,
Cause I tested it today..
I have on my rig with ethminer about 770w at the wall..
Today I tested with CM dual mode and.. Power consumption gets to the 870W.. so I stopped (because I have Corsair 850W only)
Maybe I will change something (replace some 280x by 380x) and I will try, so I have aditional question .. maybe this is not quiet right topic...
Do you think thermal paste changig (f.e to gelid gc-extreme ) could help with decreasing temperatures?

GRinvest

member

Activity: 114

Merit: 10

thank you it will be good

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: GRinvest on May 21, 2016, 05:33:33 PM

You can make a change to the pool without having to reboot?

Yes, applying epools.txt and dpools.txt without reboot will be done in next update, it will be available within 24 hours.

GRinvest

member

Activity: 114

Merit: 10

You can make a change to the EthMan without having to reboot? make the a pool manager

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: GRinvest on May 21, 2016, 05:27:03 PM

@ Claymore
What effect on GPU does the the frequent restart miner in program EthMan. when I want to replace pool ?

It's not a problem for GPU if miner restarts often. But why do you want to change pools frequently?

GRinvest

member

Activity: 114

Merit: 10

@ Claymore
What effect on GPU does the the frequent restart miner in program EthMan. when I want to replace pool ?

razorgames

member

Activity: 112

Merit: 10

Quote from: omnik on May 21, 2016, 03:26:32 PM

@ Claymore
I want to tryout https://minergate.com/ pool, which was one of my favorite from XMR mining, but I cant run your miner even with allpool option. Does your miner support this pool?

May want to watch them I have been waiting for over a month on payouts and they just say keep sending email. Not to mention how fked the system is with miscount shares and disappearing hashrate and stratum configuration problems.

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: omnik on May 21, 2016, 03:26:32 PM

@ Claymore
I want to tryout https://minergate.com/ pool, which was one of my favorite from XMR mining, but I cant run your miner even with allpool option. Does your miner support this pool?

It seems it supports HTTP only, so it is not supported. Anyway, mining Ethereum via HTTP is a bad idea.

Q_R_V

sr. member

Activity: 428

Merit: 250

Inactivity: 8963

Quote from: omnik on May 21, 2016, 03:27:45 PM

Quote from: alpsea on May 21, 2016, 03:25:58 PM

Crashed my psu. Working dual miner ( 4.3 ) after 1 hour.
My rig: 3x R7 370 . Psu coolermaster 600w.

What did you expect with CM 600W...

It's not fault of CM 600.
R7 370 can suck up to 150W when in dual. 75W can come from PCI-e 6 pin, so another 75W (6,25A) must flow through PCI-E slot from motherboard. And this is only for one card! Make it times 3 and you get almost 20A flowing through motherboard. Risers powered directly form psu are resonable idea in that case.

omnik

sr. member

Activity: 569

Merit: 250

Quote from: alpsea on May 21, 2016, 03:25:58 PM

Crashed my psu. Working dual miner ( 4.3 ) after 1 hour.
My rig: 3x R7 370 . Psu coolermaster 600w.

What did you expect with CM 600W...

omnik

sr. member

Activity: 569

Merit: 250

@ Claymore
I want to tryout https://minergate.com/ pool, which was one of my favorite from XMR mining, but I cant run your miner even with allpool option. Does your miner support this pool?

alpsea

copper member

Activity: 1274

Merit: 555

https://refpa28543.top/L?tag=d_286347m_1264c_&site

Crashed my psu. Working dual miner ( 4.3 ) after 1 hour.
My rig: 3x R7 370 . Psu coolermaster 600w.
-
Dual miner 4.3 calistirdiktan 1saat sonra psu yandı. Tam yanma aşamasında kokudan farkettik kartları zor kurtardık. Anakart ve psu pert.
Kartlarin cektigi watt hesaplamasini dikkatli yapmak lazim. Benim gibi ucu ucuna yeten psu kullananların riski büyük.

tolazy

full member

Activity: 196

Merit: 100

Quote from: dagarair on May 21, 2016, 01:33:24 PM

Quote from: tolazy on May 21, 2016, 12:36:52 PM

anyone this miner on windows 10 with a 390x ?
want to know if you get lower then 30mhs i'm on windows 7 atm

I get 30 Mh I have 2 x 6 card 390's on windows 10. Works like a champ.

ok thx. seen some that have lower mhs on windows 10

BenSF

newbie

Activity: 19

Merit: 0

Is there a mining pool that has both DCR and ETH that Auto exchanges to BTC? Mining Pool Hub is almost it but it does not have DCR.

ExcelThroughKnowledge

full member

Activity: 165

Merit: 100

can anyone fill me in how does solo mining work?

When we find a block, we definitely would get the reward just that we need time to solve as compared to pool?

Or when you find a block, there are also possibilities that others found the same block and is rushing for the solution together and it all depends on who gotten the solution first? hmm..? I'm currently pool mining but would wanna try out solo mining to see how it is..

Thanks in advance, sorry for such noob questions.. I'm still new!

dagarair

sr. member

Activity: 847

Merit: 383

Quote from: tolazy on May 21, 2016, 12:36:52 PM

anyone this miner on windows 10 with a 390x ?
want to know if you get lower then 30mhs i'm on windows 7 atm

I get 30 Mh I have 2 x 6 card 390's on windows 10. Works like a champ.

bradli

member

Activity: 82

Merit: 10

How can i fix load usage(100%) on gpu ?
It s move up and down.
Does Anyone know ?
http://prntscr.com/b6ry21
http://prntscr.com/b6rye4

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1302. (Read 6590757 times)