Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1313.

olajos

newbie

Activity: 46

Merit: 0

Quote from: Claymore on May 18, 2016, 09:15:52 AM

v4.3:

- added "EthMan" - an utility for remote monitoring/management.
- added "-estale" option to send stale shares for Ethereum, it can increase effective hashrate a bit.
- now all options can be stored in "config.txt" file.
- added "-ftime" option.
- added "-erate" option.
- added "-tstop" option.
- now miner sends hashrate to geth in solo mining mode.
- added "-mport" option for remote management.
- bug fixes.

Thank you Claymore.

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: Flexystar on May 18, 2016, 10:40:18 AM

What u mean in remote manager "Target MH" ?
Value for?

You can specify miner hashrate. If miner will report less hashrate, it will be in red color in the list.

cryptoc19

newbie

Activity: 15

Merit: 0

Quote from: Claymore on May 18, 2016, 09:15:52 AM

v4.3:

- added "EthMan" - an utility for remote monitoring/management.
- added "-estale" option to send stale shares for Ethereum, it can increase effective hashrate a bit.
- now all options can be stored in "config.txt" file.
- added "-ftime" option.
- added "-erate" option.
- added "-tstop" option.
- now miner sends hashrate to geth in solo mining mode.
- added "-mport" option for remote management.
- bug fixes.

thank you!
any performance tuning/improvements over 4.2?

Flexystar

full member

Activity: 1092

Merit: 227

What u mean in remote manager "Target MH" ?
Value for?

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

v4.3:

- added "EthMan" - an utility for remote monitoring/management.
- added "-estale" option to send stale shares for Ethereum, it can increase effective hashrate a bit.
- now all options can be stored in "config.txt" file.
- added "-ftime" option.
- added "-erate" option.
- added "-tstop" option.
- now miner sends hashrate to geth in solo mining mode.
- added "-mport" option for remote management.
- bug fixes.

spiete

member

Activity: 98

Merit: 10

I have 1x 380x and 2x 370

If i will mine both ether and decred will the profit for ether be reduced?

What m/hs will it be for mining decred with this GPUs?

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: Balbec on May 18, 2016, 12:32:49 AM

Quote from: Claymore on May 17, 2016, 07:01:06 AM

Quote from: Balbec on May 17, 2016, 05:20:05 AM

Dear Claymore! Tried to solomine I found -etht parameter couldn't set less than 200 ms. Is it normal? Thanks a lot for miner, happy using it.

It can be less up to about 10ms, but -etht is the pause between requests, so if HTTP request takes 200ms in your environment, you will not be able to check for new job faster.

Ok, I see it. The question is because using another miner before. It allows put the request-between time as low as you wrote. Such feature isn't pool-friendly, of course (we shouldn't help DDoSers). But node allows some experiments. And I have a bad luck with CDM.

Check readme:
...
note that this mode is not intended for proxy or HTTP pools
...

The miner supports all Stratum versions for Ethereum, so HTTP is necessary for solo mining only. Using a proxy will reduce effective hashrate by at least 1%. Using HTTP pools will reduce effective hashrate by at least 5%.

mandica

hero member

Activity: 693

Merit: 508

Quote from: dingyangangel on May 18, 2016, 01:23:51 AM

can't work in www.bw.com

That is bitcoin mining.

dingyangangel

newbie

Activity: 10

Merit: 0

can't work in www.bw.com

citronick

legendary

Activity: 1834

Merit: 1080

---- winter*juvia -----

Quote from: fredeq on May 18, 2016, 12:40:35 AM

Quote from: DragonSlayer on May 17, 2016, 08:05:28 PM

Any insight on why I am not able to connect to Supranova? Here are the command lines that I have tried. I am connecting fine to dcr. At the end, I want to dual mine with maximum dcr hash as possible.

Code:

EthDcrMiner64.exe -epool http://eth-us.suprnova.cc:3000/suprnova.5/50 -ewal TheKing.Miner2 -epsw 1234 -allpools 1 -dpool stratum+tcp://yiimp.ccminer.org:4252 -dwal Dsp5aV3vePqVtw5oLDEXQqmgnKBLwjdSCKZ -dpsw miner2

and

Code:

EthDcrMiner64.exe -epool http://eth.suprnova.cc:4000 -ewal TheKing.Miner2 -epsw 1234 -allpools 1 -dpool stratum+tcp://yiimp.ccminer.org:4252 -dwal Dsp5aV3vePqVtw5oLDEXQqmgnKBLwjdSCKZ -dpsw miner2

Thanks

Try the second line, but `ewal` should be `eworker`.

I feel ethermine.org is a better choice because its a prooven Stratum based pool and will work best with CDM which also prefers Stratum - this is just my humble opinion.
If you follow the format in CDM's example on Page 1, you get your rig working right away. Best of all, the pool does not require any registration - just use your ETH address and off you go!

fredeq

legendary

Activity: 1537

Merit: 1005

Quote from: DragonSlayer on May 17, 2016, 08:05:28 PM

Any insight on why I am not able to connect to Supranova? Here are the command lines that I have tried. I am connecting fine to dcr. At the end, I want to dual mine with maximum dcr hash as possible.

Code:

EthDcrMiner64.exe -epool http://eth-us.suprnova.cc:3000/suprnova.5/50 -ewal TheKing.Miner2 -epsw 1234 -allpools 1 -dpool stratum+tcp://yiimp.ccminer.org:4252 -dwal Dsp5aV3vePqVtw5oLDEXQqmgnKBLwjdSCKZ -dpsw miner2

and

Code:

EthDcrMiner64.exe -epool http://eth.suprnova.cc:4000 -ewal TheKing.Miner2 -epsw 1234 -allpools 1 -dpool stratum+tcp://yiimp.ccminer.org:4252 -dwal Dsp5aV3vePqVtw5oLDEXQqmgnKBLwjdSCKZ -dpsw miner2

Thanks

Try the second line, but `ewal` should be `eworker`.

Balbec

newbie

Activity: 45

Merit: 0

Quote from: Claymore on May 17, 2016, 07:01:06 AM

Quote from: Balbec on May 17, 2016, 05:20:05 AM

Dear Claymore! Tried to solomine I found -etht parameter couldn't set less than 200 ms. Is it normal? Thanks a lot for miner, happy using it.

It can be less up to about 10ms, but -etht is the pause between requests, so if HTTP request takes 200ms in your environment, you will not be able to check for new job faster.

Ok, I see it. The question is because using another miner before. It allows put the request-between time as low as you wrote. Such feature isn't pool-friendly, of course (we shouldn't help DDoSers). But node allows some experiments. And I have a bad luck with CDM.

DragonSlayer

full member

Activity: 181

Merit: 100

Any insight on why I am not able to connect to Supranova? Here are the command lines that I have tried. I am connecting fine to dcr. At the end, I want to dual mine with maximum dcr hash as possible.

Code:

EthDcrMiner64.exe -epool http://eth-us.suprnova.cc:3000/suprnova.5/50 -ewal TheKing.Miner2 -epsw 1234 -allpools 1 -dpool stratum+tcp://yiimp.ccminer.org:4252 -dwal Dsp5aV3vePqVtw5oLDEXQqmgnKBLwjdSCKZ -dpsw miner2

and

Code:

EthDcrMiner64.exe -epool http://eth.suprnova.cc:4000 -ewal TheKing.Miner2 -epsw 1234 -allpools 1 -dpool stratum+tcp://yiimp.ccminer.org:4252 -dwal Dsp5aV3vePqVtw5oLDEXQqmgnKBLwjdSCKZ -dpsw miner2

Thanks

WhyMe

sr. member

Activity: 661

Merit: 250

Quote from: eugeney on May 17, 2016, 02:53:19 PM

Quote from: WhyMe on May 17, 2016, 02:46:32 PM

How can we have email monitoring on dwarf with CDM ?
wallet/email ?
email in -epsw ?

Thanks

/your_wallet/worker/email

Thanks

Flexystar

full member

Activity: 1092

Merit: 227

Quote from: Claymore on May 17, 2016, 04:36:43 PM

I will check it and fix if necessary in next update, it will be available within 24 hours.

Yup, need fix, because only reboot fix frezzed miner at my incident. (

Thx.

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: Flexystar on May 17, 2016, 03:28:36 PM

So... i create files in prog dir:
reboot.bat
reboot.sh
reboot.bash

With reboot command in linux (uebuntu 14.04).

And....:

Code:

22:20:53:241 94710780 watchdog - thread 7, hb time 262
22:20:53:241 94710780 Starting "reboot.bat"...
22:20:53:241 94710780 File "reboot.bat" not found
22:20:53:400 777fe700 ETH: put share nonce 3fb3793822d

I will check it and fix if necessary in next update, it will be available within 24 hours.

Flexystar

full member

Activity: 1092

Merit: 227

So... i create files in prog dir:
reboot.bat
reboot.sh
reboot.bash

With reboot command in linux (uebuntu 14.04).

And....:

Code:

22:20:53:241 94710780 watchdog - thread 7, hb time 262
22:20:53:241 94710780 Starting "reboot.bat"...
22:20:53:241 94710780 File "reboot.bat" not found
22:20:53:400 777fe700 ETH: put share nonce 3fb3793822d

eugeney

hero member

Activity: 1036

Merit: 599

Quote from: WhyMe on May 17, 2016, 02:46:32 PM

How can we have email monitoring on dwarf with CDM ?
wallet/email ?
email in -epsw ?

Thanks

/your_wallet/worker/email

WhyMe

sr. member

Activity: 661

Merit: 250

How can we have email monitoring on dwarf with CDM ?
wallet/email ?
email in -epsw ?

Thanks

xnaldax

newbie

Activity: 34

Merit: 0

Quote from: spiete on May 17, 2016, 12:12:31 PM

Trying to set up local proxy.

1x380x and 2x 370

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -mode 1 -epool http://127.0.0.1:8085 -etha 0 -ethi 16 -etht 200

Proxy

# Host and port for your workers
HOST = "127.0.0.1"
PORT = 8085

# Main pool
POOL_HOST = "eth-ru.dwarfpool.com"
POOL_PORT = 8008

Hash is going but shares is not.

https://i.imgur.com/Hzqmt0D.jpg

What etha should i set for 380x and 370? Will it change something?

What is wrong with my config?

Do not use proxy (this miner has stratum support) Wink

start.bat
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool eth-eu.dwarfpool.com:8008 -ewal your_wallet/worker -epsw x

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1313. (Read 6590757 times)