Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 133. (Read 6590757 times)

Getting unknown option -rxboost 1

I downloaded the latested version , is it not copied correctly ? on the UI it stills says 14.0 beta

Ubuntu 18.04, 19.10 - linux driver, use claymore 12.0. I prefer use bios modded cards and not see why realtime straps better, its only additional load time and crash risks on my mind.

https://bitcointalksearch.org/topic/amd-mem-tweak-xl-readmodify-timingsppstraps-on-the-fly-5123724 -  AMD Mem Tweak - tool, which give same result, as rxboost (see --ref parameter), but i can test result in realtime, without restart miner. I`ve recieve ~+0.4 MH/card (rx480/580) with 10...15 value.

Claymore - best miner for me, for exammle, ethminer take +5 watt on Core (from 65W) with little low HR, but i`m change straps, overclock, underclock and downvolt with scripts, now tune memory. Change straps from miner for save some time with less control and understanding

HiveOs, SimpleMiningOs - just ubuntu based distros, which using tools and scripts, created by other peoples, but have nothing unique. It costs some money, i think only reason - their web interface, but i prefer email and telegram notification (easy create with scripts), remote management via ssh.

So what about my question ? Any advice ?

I am running Rxboost on ethOS (Linux), RX474 32.1mh/s , before 31.4mh/s

I am running Rxboost on ethOS (Linux), RX474 32.1mh/s , before 31.4mh/s

Excellent results on my MSI GTX 1066 ARMOR (Samsung +50 core clock +850 memory clock)
it was 24.5 now 26.8 MH / s
How can I disable the test mode of Windows 7?

Excellent results on my MSI GTX 1066 ARMOR (Samsung +50 core clock +850 memory clock)
it was 24.5 now 26.8 MH / s
How can I disable the test mode of Windows 7?

Microns strap 1,100 - 25.6 on best cards, while keeping <70w per card (by undervolting, but I guess it is now equal to PL70).
Did not get to samsung jet as I still have lot of stability problems.

Do you think, that maybe using PL instead of UV there is better stability with straps?

17:38:20:142   b14   GPU 0 temp = 50, old fan speed = 36, new fan speed = 25

17:38:20:149   b14   GPU 1 temp = 48, old fan speed = 36, new fan speed = 25

17:38:20:156   b14   GPU 2 temp = 53, old fan speed = 36, new fan speed = 25

17:38:20:164   b14   GPU 3 temp = 50, old fan speed = 0, new fan speed = 25

17:38:20:169   b14   GPU 4 temp = 48, old fan speed = 37, new fan speed = 25

17:38:20:176   b14   GPU 5 temp = 56, old fan speed = 37, new fan speed = 25

17:38:22:577   a1c   buf: {"jsonrpc":"2.0","id":0,"result":["0x753bed662cdbb1fe2a1715b2c3786651341f7d69ed56c7ea6f00de27515547a3","0x6223dcf8d1c28b47682d46067d41c04a4504c689bece7efb39c4f565f7298776","0x000000006df37f675ef6eadf5ab9a2072d44268d97df837e6748956e5c6c2116"]}

17:38:22:579   a1c   ETH: 05/22/19-17:38:22 - New job from eth-eu1.nanopool.org:9999
17:38:22:580   a1c   target: 0x000000006df37f67 (diff: 10000MH), epoch 260(3.03GB)
17:38:22:581   a1c   ETH - Total Speed: 29.111 Mh/s, Total Shares: 4, Rejected: 0, Time: 00:15
17:38:22:582   a1c   ETH: GPU0 4.744 Mh/s, GPU1 4.877 Mh/s, GPU2 4.874 Mh/s, GPU3 4.864 Mh/s, GPU4 4.865 Mh/s, GPU5 4.887 Mh/s
17:38:23:185   b14   GPU 0 temp = 49, old fan speed = 36, new fan speed = 25

17:38:23:192   b14   GPU 1 temp = 48, old fan speed = 36, new fan speed = 25

17:38:23:201   b14   GPU 2 temp = 52, old fan speed = 36, new fan speed = 25

17:38:23:208   b14   GPU 3 temp = 51, old fan speed = 0, new fan speed = 25

17:38:23:217   b14   GPU 4 temp = 48, old fan speed = 37, new fan speed = 25

17:38:23:223   b14   GPU 5 temp = 56, old fan speed = 37, new fan speed = 25

It increases refresh interval: https://en.wikipedia.org/wiki/Memory_refresh
This setting is not included in AMD straps so you cannot change it with straps.

Hi Guys,
Why are my 8cards setups crashing? The rig freezes immediatly after applying the first straps. When i remove the rxboost 1 it works fine. I dont have issues with my 5 and 6 cards setup.
The cards are 8x rx580 8gb. with Asrock h110.
Using Adrenalin 19.5.1 and Claymore 14.5

Please HELP!

Simplemining just implemented Rxboost on linux