Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 137.

Bojcha

hero member

Activity: 848

Merit: 500

Now that's something.. -rxboost

lexele

full member

Activity: 190

Merit: 100

Quote from: lexele on May 19, 2019, 02:33:26 PM

Quote from: weenkky on May 17, 2019, 07:00:08 PM

Quote from: lexele on May 17, 2019, 05:59:46 PM

Quote from: encycrypto on May 17, 2019, 05:41:49 PM

Quote from: weenkky on May 17, 2019, 04:01:59 PM

my tests Claymore v14.4
1050 Ti ~ 17.7 strap 5
1060 6Gb ~ 26.5 to 27.6 strap 1 (depends on card)
1070 ~ 33.5 to 34.7 strap 1 (depends on card)
1080 ~ 44.3 strap 2 (without pill)

Any estimate of 1080 ti? I think it should be at about 48 if the basic 1080 is at 44.

I did some quick tests and got 48/49 with 1080TI while Pill gives 52@160W.
1070 arround 34@100W.

I wonder If it will be stable over night.

Are you sure about 34@100W on 1070? I mine Ethereum and one 1070 gives 33.6@110W, another 34.7@114W

Sorry for replying late,
Well it's what I read in GPU-Z and it's consistent with the read at the wall, but the 1070s are not alone on the rig so hard to say at +-10W. Power at 50% and mem +600 (Micron)

Ok, just to be sure I run the settings again and that's what I got for 1070( MSI aero and colorful, both Micvron mem):

PW:50%
Core: +220
Mem: +600
Strap: 4
33.6@95W

PW:53% same strap, core and mem
34.05@100W

big_daddy

hero member

Activity: 1680

Merit: 583

xUSD - The PRIVATE stable coin - Haven Protocol

do you have to flash the cards back to bios standard or you can use the new Clay on bios modded cards too?
and is good to run the last AMD drivers?

UnclWish

sr. member

Activity: 1484

Merit: 253

Quote from: taras700 on May 19, 2019, 01:39:07 PM

in version 12.0 my rx 580 8gb asus cards work stably at 1150/2200 and give out 30.5 mh in this version in the same way. but when I put the strap function then the farm just hangs. tell me what values are better to put on my cards? The cards have the original BIOS
-----------------------------------------------------------------------------------------------------------
в вepcии 12.0 мoи кapты rx 580 8gb asus paбoтaют cтaбильнo пpи 1150/2200 и выдaют 30.5 mh в этoй вepcии тoчнo тaк жe. нo кoгдa я cтaвлю фyнкцию strap тo фepмa пpocтo зaвиcaeт. пoдcкaжитe кaкиe знaчeния лyчшe cтaвить нa мoиx кapтax? B кapтax y мeня opигинaльный биoc

Пpoбyй cнaчaлa -strap 1@2000.
Cмoтpишь cкopocть/cтaбильнocть, пoтoм пoднимaй чacтoтy -strap 1@2050, -strap 1@2100 и т.д.
Moжнo пoлyчить ycкopeниe и бeз иcпoльзoвaния cтpaпoв мaйнepa. Для этoгo пpocтo дoбaвь в cтpoкy зaпycкa -rxboost 1.

evlo

jr. member

Activity: 155

Merit: 4

Quote from: rednoW on May 19, 2019, 12:09:47 PM

latest nvidia kernel boost (not straps but kernel!) made it on par with phoenix.
Now we need the same for polaris. Phoenix has faster kernel 1 and kernel 3, and the speed now is the same due to straps in Claymore's
If you (some way) bring those straps to phoenix it will be even faster.
For example, rx570 8gb micron 1220/2250@855mv (83watt gpu-z) is capable of 34.4mhs with such combination.

wtf, what strap are you using to get that?

Coinseeker18

newbie

Activity: 22

Merit: 0

Hi; I´m testing the las version with strap in my rig with 3 1080ti 1 1070 and 2 vegas with the pill and i have an incosistent hashrate from 200 Mh to 296 mhs. What can I do? my parameter are strap 1 for all cards intensity 33.

lexele

full member

Activity: 190

Merit: 100

Quote from: weenkky on May 17, 2019, 07:00:08 PM

Quote from: lexele on May 17, 2019, 05:59:46 PM

Quote from: encycrypto on May 17, 2019, 05:41:49 PM

Quote from: weenkky on May 17, 2019, 04:01:59 PM

my tests Claymore v14.4
1050 Ti ~ 17.7 strap 5
1060 6Gb ~ 26.5 to 27.6 strap 1 (depends on card)
1070 ~ 33.5 to 34.7 strap 1 (depends on card)
1080 ~ 44.3 strap 2 (without pill)

Any estimate of 1080 ti? I think it should be at about 48 if the basic 1080 is at 44.

I did some quick tests and got 48/49 with 1080TI while Pill gives 52@160W.
1070 arround 34@100W.

I wonder If it will be stable over night.

Are you sure about 34@100W on 1070? I mine Ethereum and one 1070 gives 33.6@110W, another 34.7@114W

Sorry for replying late,
Well it's what I read in GPU-Z and it's consistent with the read at the wall, but the 1070s are not alone on the rig so hard to say at +-10W. Power at 50% and mem +600 (Micron)

mu_enrico

copper member

Activity: 2324

Merit: 2142

Slots Enthusiast & Expert

Quote from: encycrypto on May 19, 2019, 11:42:03 AM

Have you recorded the power consumption of the card while it's mining? 13 Mh/s is not a good amount of hash, specially if you've to pay more in electric bill than earning of Ethereum!
I'm planning to get more of those tiny cards if they consume less power.

So I have 1 RX 560 and 3 RX 550 in my PC, the total hashrate is 53.5Mh/s, and the power is 300W. I'm just a casual miner who casually mines Ethash coins (including shitcoins). My PC was rarely off anyway, so profitability is not the most important thing for me at the moment.

However, who knows if my favorite shitcoins will moon and make this activity suddenly worth it Grin

taras700

newbie

Activity: 26

Merit: 0

in version 12.0 my rx 580 8gb asus cards work stably at 1150/2200 and give out 30.5 mh in this version in the same way. but when I put the strap function then the farm just hangs. tell me what values are better to put on my cards? The cards have the original BIOS
-----------------------------------------------------------------------------------------------------------
в вepcии 12.0 мoи кapты rx 580 8gb asus paбoтaют cтaбильнo пpи 1150/2200 и выдaют 30.5 mh в этoй вepcии тoчнo тaк жe. нo кoгдa я cтaвлю фyнкцию strap тo фepмa пpocтo зaвиcaeт. пoдcкaжитe кaкиe знaчeния лyчшe cтaвить нa мoиx кapтax? B кapтax y мeня opигинaльный биoc

tale01

newbie

Activity: 121

Merit: 0

Hi Dev,
When fijiboost ? Wink

it mean R9 Fury HBM RAM (only one memory type: Hynix)

rednoW

legendary

Activity: 1510

Merit: 1003

latest nvidia kernel boost (not straps but kernel!) made it on par with phoenix.
Now we need the same for polaris. Phoenix has faster kernel 1 and kernel 3, and the speed now is the same due to straps in Claymore's
If you (some way) bring those straps to phoenix it will be even faster.
For example, rx570 8gb micron 1220/2250@855mv (83watt gpu-z) is capable of 34.4mhs with such combination.

encycrypto

member

Activity: 294

Merit: 53

Quote from: mu_enrico on May 19, 2019, 08:18:11 AM

Tried v14.5 and "-rxboost 1" gave me improved hashrate.
Both my RX550 and RX560 stable with the following settings:
- cvddc/mvddc: 850/850
- cclock/mclock: 1100/1900
- strap: 2
- rxboost: 1

Hash ~13.4 Mh/s
I'm satisfied with the power consumption/performance so far, so I'm going to leave my PC mine ETH while idle Grin

Have you recorded the power consumption of the card while it's mining? 13 Mh/s is not a good amount of hash, specially if you've to pay more in electric bill than earning of Ethereum!

I'm planning to get more of those tiny cards if they consume less power.

evlo

jr. member

Activity: 155

Merit: 4

I wonder if it is possible to destroy card using strap. 2 of my nvidias now crash even without straps, while before they worked for months with no issue ...

dagarair

sr. member

Activity: 847

Merit: 383

Quote from: UnclWish on May 19, 2019, 04:10:00 AM

Good! With 14.5b version and -rxboost option gives on 1 card +1,5% and on 2nd card +3,5%. Finally Claymore's miner became faster Phoenix with double kernels. Using my straps on RX 580 8G hynix MJR.
Excellent work!

It's need to find new best -dcri value or it stays the same as on 12.0 version?
EDIT: New -dcri values increased a bit speed!

I hope Claymore took care of Eliovp because without his selflessness this would of never came to be. Just sayin!

mu_enrico

copper member

Activity: 2324

Merit: 2142

Slots Enthusiast & Expert

Tried v14.5 and "-rxboost 1" gave me improved hashrate.
Both my RX550 and RX560 stable with the following settings:
- cvddc/mvddc: 850/850
- cclock/mclock: 1100/1900
- strap: 2
- rxboost: 1

Hash ~13.4 Mh/s
I'm satisfied with the power consumption/performance so far, so I'm going to leave my PC mine ETH while idle Grin

Lunga Chung

member

Activity: 277

Merit: 23

Consumption looks just a little bit higher, but overall good gain

thereal_kirilvvbg

newbie

Activity: 8

Merit: 0

Quote from: fluxy12 on May 19, 2019, 04:09:35 AM

Quote from: fluxy12 on May 19, 2019, 04:02:23 AM

Quote from: thereal_kirilvvbg on May 19, 2019, 04:00:19 AM

Guys,

Can you help me?

"Driver is not installed! Trying to install it...
The boot configuration data store could not be opened.
Access is denied.
Failed, you must run miner with admin rights."

Miner still works, but I cannot see any change in hashrates.

Right click on EthDcrMiner64/properties/compatibility/tick "launch with admin rights"/apply

you're done

Also you must put this on your config "-driver install"

Thanks Fluxy12,

It worked - and after restart driver is already install, so I had to remove "-drive install".

evlo

jr. member

Activity: 155

Merit: 4

Ah, nvidia straps are gonna really be fun
I dunno why my gpu2 can't take any OC now, same memory as all the others, but that card always took less OC IIRC
Seems like I will need to do same card GUID to OC to Strap tool Sad

VasilyS

member

Activity: 618

Merit: 21

Quote from: ?? on ??

тoлькo для windows 10, вepнo???

Ha win7 и 8 paбoтaeт пpeкpacнo. Test of Claymore 14 in Russian language is in this article: https://www.cryptoprofi.info/?p=2956. Miner is working perfectly, but to acheive stability I'm using option -sintensity 10.

Rasty

newbie

Activity: 4

Merit: 0

Quote from: fluxy12 on May 19, 2019, 04:02:23 AM

Right click on EthDcrMiner64/properties/compatibility/tick "launch with admin rights"/apply

you're done

Thanks you a lot!

i have ~54-55 mh with -strap 4. with other straps PC are died and restarting.

With 1080Ti needs to use EthPill? or without it?

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 137. (Read 6590565 times)