x1 380x and x2 370
Got this settings
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eth-ru.dwarfpool.com:8008 -ewal 0xA0F5578094e713c58B901eC43FB58bbbD7A63372 -epsw x -eworker dw1
What does incorrect share means?
I didnt overclocked my GPUs.
Also 46 seconds for one round is okay? Or what 46 seconds mean?
And how do i check shares for last hour? Not for every time.
With genoil it has 0.2 (--farm-recheck 100) second for round.
Also did my config is set right? Or there is something that i can modify?
And do i need to run geth? Or dwarf proxy?
Thanks!
Update###
Is this okay that i got 1 rejected share after 5 minutes?
Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1368. (Read 6590757 times)
April 22, 2016, 02:54:29 PM
April 22, 2016, 02:30:50 PM
Is anybody getting paid what the calculator's say you should get paid? I am definitely not. If you are, which calculators and pools are you using?
I'm facing the same bullshit on ethermine... The displayed hashrate(poolside 76Mh) is nice and smooth, the calculated earning(pool calc) is a bit above 1eth/24h. I have checked it quite often in the last 4 days and the actual revenue is lower than it should be.
I should get the payment each day a bit earlier but those are the facts:
Thu Apr 21 2016 14:52:58 GMT+0200 (CEST)
Wed Apr 20 2016 12:47:05 GMT+0200 (CEST)
Tue Apr 19 2016 09:42:50 GMT+0200 (CEST)
Mon Apr 18 2016 07:51:57 GMT+0200 (CEST
I know those are the pools... But no way of going solo below 500Mh.
I have about 70Mh and show just below 1 ETH /Day that is what I have been getting.
Which pool are you at and is that 70mh/s the calculated hashrate at the pool? According to BChydro's calculator http://karldiab.com/EthereumMiningCalculator 73mh/s = 1 eth so it looks like you're getting paid what it shows. For comparison, using my numbers at nanopool (their approx calculator), it takes me 85mh/s to get 1 eth.
I have had my miners down to update the software.
Reported Hashrate: 70.4 MH/s
Note: This is the hashrate as reported by your miner to the pool.
Effective Current Hashrate: 72.2 MH/s
Note: The effective current hashrate is calculated according your submitted shares using a 60 minute window. If you start mining on the pool it will take up to 2 hours till the displayed hashrate is accurate. As this value depends on the luck of your miners deviations from your real hashrate are normal.
Effective Average Hashrate (last 24h): 68.1 MH/s
Note: The calculation of this indicator is similar to the effective current hashrate but using a 24 hour window.
April 22, 2016, 02:20:59 PM
For anyone who is interested in knowing how to get the dlls from any driver version. Download the specific driver you want the dll's for and start the install, after it has finished extracting select cancel, this will stop the install but the contents of the driver has already been unpacked. Then look for C:\AMD\Radeon-Crimson-15.12-With-DOTNet45-Win7-64Bit\Packages\Drivers\Display\W76A_INF\B297238
Here i have used 15.12 as an example but u get the idea
Here i have used 15.12 as an example but u get the idea
Thank you for the info! But how do you know if it has worked? I have same exact hashing speed with 15.12 dlls than I had with the installed 16.1.1 catalyst.
Btw, I've got 18.5 MH/s with a 7970, is it ok or is there some parameters I could try to up it a bit?
23mh/s is possible with 7970.
But be prepared to overclock it to 1100/1700MHz
With which miner settings
? I used to oc it to 1200-1600 for scrypt back in the day but it doesn't seem to affect eth that much.Clock speeds make a big difference on Eth, especially RAM. But I have also used a hex editor to change the RAM timings on my GFX card ROM. That helps a lot too. On my 7970, I got 2mh/s just from changing the RAM timings.
Here is my miner settings, with Cat 16.3.2
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eu1.nanopool.org:9999 -ewal 0x9c4545befe9bfec17ffcdfbebe34a7ecc80e9165 -epsw x -eworker Main -etha 1,1,1 -ethi 16,16,4 -wd 1 -mode 1 -r 0 -dbg -1
I use intensity of 4 on my display card so as not to make my PC unusable
Wow, that's a nice boost! And you also applied the oc with the custom rom? I used to use cgminer to do the oc.
Thank you for the settings! I thought you'd have much higher intensities! And you have better results with slow mode (etha 1) than fast?
On my 7950 etha 1 is definitely faster, I don't think it's any different on the 7970. I'm sure claymore could explain why that would be.
I applied an overclock to all three cards on the ROM, it's a safe stable overclock for gaming. But for Eth mining I use MSI Afterburner to get a bit more.
The 2x7950 default clocks are 825/1250, I modified ROM with 1080/1500 and overclock to 1130/1700(This card is sandwiched between the other two and runs hot) and 1190/1700(This is the bottom card and runs much cooler than the other two) with Afterburner. These get me 23 and 23.5mh/s respectively.
The 7970 I think had 1040/1400, I modified ROM with 1080/1500 and use afterburner to overclock to 1100/1700. When it wasn't the display card and in a cooler PC it would do 1240 on the core! But as the display card in my main PC, what I'm using to type this, it artifacts at 1140 on the core.
April 22, 2016, 02:19:18 PM
Is anybody getting paid what the calculator's say you should get paid? I am definitely not. If you are, which calculators and pools are you using?
I'm facing the same bullshit on ethermine... The displayed hashrate(poolside 76Mh) is nice and smooth, the calculated earning(pool calc) is a bit above 1eth/24h. I have checked it quite often in the last 4 days and the actual revenue is lower than it should be.
I should get the payment each day a bit earlier but those are the facts:
Thu Apr 21 2016 14:52:58 GMT+0200 (CEST)
Wed Apr 20 2016 12:47:05 GMT+0200 (CEST)
Tue Apr 19 2016 09:42:50 GMT+0200 (CEST)
Mon Apr 18 2016 07:51:57 GMT+0200 (CEST
I know those are the pools... But no way of going solo below 500Mh.
I have about 70Mh and show just below 1 ETH /Day that is what I have been getting.
Which pool are you at and is that 70mh/s the calculated hashrate at the pool? According to BChydro's calculator http://karldiab.com/EthereumMiningCalculator 73mh/s = 1 eth so it looks like you're getting paid what it shows. For comparison, using my numbers at nanopool (their approx calculator), it takes me 85mh/s to get 1 eth.
April 22, 2016, 02:13:57 PM
finally it runs with coinotron.
But after 1:04h run time the miner finds instead of green "share found!" only white "outdated share found - skip"
what does this mean?
Please, post here bat file to CoinotroneBut after 1:04h run time the miner finds instead of green "share found!" only white "outdated share found - skip"
what does this mean?
I just switched back to... I was there before Claymore came with this great miner
my bat:
Code:
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool coinotron.com:3344 -ewal user.rig -esm 2 -epsw password -dpool stratum+tcp://dcr.suprnova.cc:2252 -dwal user.rig -dpsw password -dcri 45 -allpools 1 -cclock 1165
pause
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool coinotron.com:3344 -ewal user.rig -esm 2 -epsw password -dpool stratum+tcp://dcr.suprnova.cc:2252 -dwal user.rig -dpsw password -dcri 45 -allpools 1 -cclock 1165
pause
change user.rig and password
Take care also on the -dcri and -cclock to suit your needs
April 22, 2016, 02:08:27 PM
For anyone who is interested in knowing how to get the dlls from any driver version. Download the specific driver you want the dll's for and start the install, after it has finished extracting select cancel, this will stop the install but the contents of the driver has already been unpacked. Then look for C:\AMD\Radeon-Crimson-15.12-With-DOTNet45-Win7-64Bit\Packages\Drivers\Display\W76A_INF\B297238
Here i have used 15.12 as an example but u get the idea
Here i have used 15.12 as an example but u get the idea
Thank you for the info! But how do you know if it has worked? I have same exact hashing speed with 15.12 dlls than I had with the installed 16.1.1 catalyst.
Btw, I've got 18.5 MH/s with a 7970, is it ok or is there some parameters I could try to up it a bit?
23mh/s is possible with 7970.
But be prepared to overclock it to 1100/1700MHz
With which miner settings
? I used to oc it to 1200-1600 for scrypt back in the day but it doesn't seem to affect eth that much.Clock speeds make a big difference on Eth, especially RAM. But I have also used a hex editor to change the RAM timings on my GFX card ROM. That helps a lot too. On my 7970, I got 2mh/s just from changing the RAM timings.
Here is my miner settings, with Cat 16.3.2
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eu1.nanopool.org:9999 -ewal 0x9c4545befe9bfec17ffcdfbebe34a7ecc80e9165 -epsw x -eworker Main -etha 1,1,1 -ethi 16,16,4 -wd 1 -mode 1 -r 0 -dbg -1
I use intensity of 4 on my display card so as not to make my PC unusable
Wow, that's a nice boost! And you also applied the oc with the custom rom? I used to use cgminer to do the oc.
Thank you for the settings! I thought you'd have much higher intensities! And you have better results with slow mode (etha 1) than fast?
April 22, 2016, 02:06:40 PM
finally it runs with coinotron.
But after 1:04h run time the miner finds instead of green "share found!" only white "outdated share found - skip"
what does this mean?
Please, post here bat file to Coinotrone But after 1:04h run time the miner finds instead of green "share found!" only white "outdated share found - skip"
what does this mean?
April 22, 2016, 02:01:39 PM
finally it runs with coinotron.
But after 1:04h run time the miner finds instead of green "share found!" only white "outdated share found - skip"
what does this mean?
But after 1:04h run time the miner finds instead of green "share found!" only white "outdated share found - skip"
what does this mean?
April 22, 2016, 01:55:03 PM
For anyone who is interested in knowing how to get the dlls from any driver version. Download the specific driver you want the dll's for and start the install, after it has finished extracting select cancel, this will stop the install but the contents of the driver has already been unpacked. Then look for C:\AMD\Radeon-Crimson-15.12-With-DOTNet45-Win7-64Bit\Packages\Drivers\Display\W76A_INF\B297238
Here i have used 15.12 as an example but u get the idea
Here i have used 15.12 as an example but u get the idea
Thank you for the info! But how do you know if it has worked? I have same exact hashing speed with 15.12 dlls than I had with the installed 16.1.1 catalyst.
Btw, I've got 18.5 MH/s with a 7970, is it ok or is there some parameters I could try to up it a bit?
23mh/s is possible with 7970.
But be prepared to overclock it to 1100/1700MHz
With which miner settings
? I used to oc it to 1200-1600 for scrypt back in the day but it doesn't seem to affect eth that much.Clock speeds make a big difference on Eth, especially RAM. But I have also used a hex editor to change the RAM timings on my GFX card ROM. That helps a lot too. On my 7970, I got 2mh/s just from changing the RAM timings.
Here is my miner settings, with Cat 16.3.2
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eu1.nanopool.org:9999 -ewal 0x9c4545befe9bfec17ffcdfbebe34a7ecc80e9165 -epsw x -eworker Main -etha 1,1,1 -ethi 16,16,4 -wd 1 -mode 1 -r 0 -dbg -1
I use intensity of 4 on my display card so as not to make my PC unusable
April 22, 2016, 01:50:41 PM
For anyone who is interested in knowing how to get the dlls from any driver version. Download the specific driver you want the dll's for and start the install, after it has finished extracting select cancel, this will stop the install but the contents of the driver has already been unpacked. Then look for C:\AMD\Radeon-Crimson-15.12-With-DOTNet45-Win7-64Bit\Packages\Drivers\Display\W76A_INF\B297238
Here i have used 15.12 as an example but u get the idea
Here i have used 15.12 as an example but u get the idea
Thank you for the info! But how do you know if it has worked? I have same exact hashing speed with 15.12 dlls than I had with the installed 16.1.1 catalyst.
Btw, I've got 18.5 MH/s with a 7970, is it ok or is there some parameters I could try to up it a bit?
23mh/s is possible with 7970.
But be prepared to overclock it to 1100/1700MHz
With which miner settings
? I used to oc it to 1200-1600 for scrypt back in the day but it doesn't seem to affect eth that much. April 22, 2016, 01:49:46 PM
Is anybody getting paid what the calculator's say you should get paid? I am definitely not. If you are, which calculators and pools are you using?
I'm facing the same bullshit on ethermine... The displayed hashrate(poolside 76Mh) is nice and smooth, the calculated earning(pool calc) is a bit above 1eth/24h. I have checked it quite often in the last 4 days and the actual revenue is lower than it should be.
I should get the payment each day a bit earlier but those are the facts:
Thu Apr 21 2016 14:52:58 GMT+0200 (CEST)
Wed Apr 20 2016 12:47:05 GMT+0200 (CEST)
Tue Apr 19 2016 09:42:50 GMT+0200 (CEST)
Mon Apr 18 2016 07:51:57 GMT+0200 (CEST
I know those are the pools... But no way of going solo below 500Mh.
I have about 70Mh and show just below 1 ETH /Day that is what I have been getting.
April 22, 2016, 01:24:32 PM
I am using "standard" settings for my 7970
GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100
And getting about 19.7 Mh/s on EHT (which is fine) but only 295 Mh/s on DCR, which is less than a fourth of what i could get solo mining DCR.
Already downgraded to 15.12 drivers.
What could it be? (i'm pretty noobish at mining)
What clocks are you using? For stock it's normal h/r.GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100
And getting about 19.7 Mh/s on EHT (which is fine) but only 295 Mh/s on DCR, which is less than a fourth of what i could get solo mining DCR.
Already downgraded to 15.12 drivers.
What could it be? (i'm pretty noobish at mining)
Oh; i thought i could get my standard DCR hash (about 1.3 Gh/s) PLUS my standard ETH hash. I guess it whould have been too good to be true
Stock clocks yep
April 22, 2016, 01:07:55 PM
I am using "standard" settings for my 7970
GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100
And getting about 19.7 Mh/s on EHT (which is fine) but only 295 Mh/s on DCR, which is less than a fourth of what i could get solo mining DCR.
Already downgraded to 15.12 drivers.
What could it be? (i'm pretty noobish at mining)
What clocks are you using? For stock it's normal h/r. GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100
And getting about 19.7 Mh/s on EHT (which is fine) but only 295 Mh/s on DCR, which is less than a fourth of what i could get solo mining DCR.
Already downgraded to 15.12 drivers.
What could it be? (i'm pretty noobish at mining)
April 22, 2016, 01:04:07 PM
I am using "standard" settings for my 7970
GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100
And getting about 19.7 Mh/s on EHT (which is fine) but only 295 Mh/s on DCR, which is less than a fourth of what i could get solo mining DCR.
Already downgraded to 15.12 drivers.
What could it be? (i'm pretty noobish at mining)
GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100
And getting about 19.7 Mh/s on EHT (which is fine) but only 295 Mh/s on DCR, which is less than a fourth of what i could get solo mining DCR.
Already downgraded to 15.12 drivers.
What could it be? (i'm pretty noobish at mining)
April 22, 2016, 12:55:22 PM
For anyone who is interested in knowing how to get the dlls from any driver version. Download the specific driver you want the dll's for and start the install, after it has finished extracting select cancel, this will stop the install but the contents of the driver has already been unpacked. Then look for C:\AMD\Radeon-Crimson-15.12-With-DOTNet45-Win7-64Bit\Packages\Drivers\Display\W76A_INF\B297238
Here i have used 15.12 as an example but u get the idea
Here i have used 15.12 as an example but u get the idea
Thank you for the info! But how do you know if it has worked? I have same exact hashing speed with 15.12 dlls than I had with the installed 16.1.1 catalyst.
Btw, I've got 18.5 MH/s with a 7970, is it ok or is there some parameters I could try to up it a bit?
23mh/s is possible with 7970.
But be prepared to overclock it to 1100/1700MHz
April 22, 2016, 12:48:16 PM
I use the miner v3.2 on coinotron for testing.
EthDcrMiner64.exe -mode 1 -epool coinotron.com:3344 -ewal user.pass -esm 2 -epsw x -dbg -1 -allpools 1
2 questions:
1. I get a message shortly after start bat: "CANNOT Parse JSON!" Is this a warning or an error?
2. Is "-allpools 1" necessary?
EthDcrMiner64.exe -mode 1 -epool coinotron.com:3344 -ewal user.pass -esm 2 -epsw x -dbg -1 -allpools 1
2 questions:
1. I get a message shortly after start bat: "CANNOT Parse JSON!" Is this a warning or an error?
2. Is "-allpools 1" necessary?
April 22, 2016, 12:29:35 PM
Is anybody getting paid what the calculator's say you should get paid? I am definitely not. If you are, which calculators and pools are you using?
I'm facing the same bullshit on ethermine... The displayed hashrate(poolside 76Mh) is nice and smooth, the calculated earning(pool calc) is a bit above 1eth/24h. I have checked it quite often in the last 4 days and the actual revenue is lower than it should be.
I should get the payment each day a bit earlier but those are the facts:
Thu Apr 21 2016 14:52:58 GMT+0200 (CEST)
Wed Apr 20 2016 12:47:05 GMT+0200 (CEST)
Tue Apr 19 2016 09:42:50 GMT+0200 (CEST)
Mon Apr 18 2016 07:51:57 GMT+0200 (CEST
I know those are the pools... But no way of going solo below 500Mh.
April 22, 2016, 12:29:26 PM
I use my own eth-proxy. with ethminer, the syntax to connect to my proxy is:
ethminer -G -F http://127.0.0.1:8080/rig1
How do I connect to my proxy and assign a worker name for ETH side of the miner?
ethminer -G -F http://127.0.0.1:8080/rig1
How do I connect to my proxy and assign a worker name for ETH side of the miner?
April 22, 2016, 11:33:50 AM
Is anybody getting paid what the calculator's say you should get paid? I am definitely not. If you are, which calculators and pools are you using?
April 22, 2016, 11:09:34 AM
Pool returned error #56.
DCR: Failed to check work on pool, retry in 20 sec...
DCR: Failed to check work on pool, retry in 20 sec...
try removing the -esm 0, and let the dualminer do auto detect
Jump to: