Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1371.

omnik

sr. member

Activity: 569

Merit: 250

Trying v3.2 "out of the box"...

1x 270, 2x 270X rig, all clocked 920/1400.

42.572MHs

Basic bat, no additions.

spiete

member

Activity: 98

Merit: 10

What settings do i need to run pc with x1 r9 380x and x2 r7 370?

Thanks!

shacky

full member

Activity: 158

Merit: 100

Quote from: merc84 on April 21, 2016, 06:07:30 PM

Quote from: _javi_ on April 21, 2016, 11:02:27 AM

may someone post 15.12 dll files for OpenCL ? thanks

Here you go, just extract and copy/paste files into folder with the miner.
https://www.dropbox.com/s/7h19jw7xezpa2i7/Amd%2015.12%20dll.rar?dl=0

Thanks!! But Im not sure if this works with this miner. @Claymore can you confirm this?

9600

full member

Activity: 207

Merit: 112

Quote from: DMaster2008 on April 21, 2016, 06:29:08 PM

Quote from: 9600 on April 21, 2016, 06:01:18 PM

Stratum - connecting to 'dcr.suprnova.cc' <178.33.228.14> port 9112

It's not DCR stratum but DCR HTTP.
DCR Stratum at suprnova is on port 2252.

Quote from: 9600 on April 21, 2016, 06:01:18 PM

connecting to 'coinotron.com' <178.217.186.125> port 3334

It's not ETH stratum either. ETH stratum at coinotron is on port 3344.

*facepalm*

That is all.

DMaster2008

member

Activity: 66

Merit: 10

Quote from: 9600 on April 21, 2016, 06:01:18 PM

Stratum - connecting to 'dcr.suprnova.cc' <178.33.228.14> port 9112

It's not DCR stratum but DCR HTTP.
DCR Stratum at suprnova is on port 2252.

Quote from: 9600 on April 21, 2016, 06:01:18 PM

connecting to 'coinotron.com' <178.217.186.125> port 3334

It's not ETH stratum either. ETH stratum at coinotron is on port 3344.

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: 9600 on April 21, 2016, 06:01:18 PM

So this one's got me stumped.

Quote

DCR: Stratum - connecting to 'dcr.suprnova.cc' <178.33.228.14> port 9112
ETH: Stratum - Connected
DCR: Stratum - Connected
ETH: Authorized
ETH: Job timeout, disconnect, retry in 20 sec...
DCR: Job timeout, disconnect, retry in 20 sec...
ETH: Stratum - connecting to 'coinotron.com' <178.217.186.125> port 3334
ETH: Stratum - Connected
ETH: Authorized
DCR: Stratum - connecting to 'dcr.suprnova.cc' <178.33.228.14> port 9112
DCR: Stratum - Connected
ETH: Job timeout, disconnect, retry in 20 sec...
DCR: Job timeout, disconnect, retry in 20 sec...
ETH: Stratum - connecting to 'coinotron.com' <178.217.186.125> port 3334
ETH: Stratum - Connected
ETH: Authorized
DCR: Stratum - connecting to 'dcr.suprnova.cc' <178.33.228.14> port 9112
DCR: Stratum - Connected
ETH: Job timeout, disconnect, retry in 20 sec...
DCR: Job timeout, disconnect, retry in 20 sec...
ETH: Stratum - connecting to 'coinotron.com' <178.217.186.125> port 3334
ETH: Stratum - Connected
ETH: Authorized
ETH: Job timeout, disconnect, retry in 20 sec...
DCR: Stratum - connecting to 'dcr.suprnova.cc' <178.33.228.14> port 9112
DCR: Stratum - Connected

Wrong ports and/or protocols. It's a good idea to show your command line if you want to know more details.

merc84

hero member

Activity: 799

Merit: 1000

Quote from: _javi_ on April 21, 2016, 11:02:27 AM

may someone post 15.12 dll files for OpenCL ? thanks

Here you go, just extract and copy/paste files into folder with the miner.
https://www.dropbox.com/s/7h19jw7xezpa2i7/Amd%2015.12%20dll.rar?dl=0

9600

full member

Activity: 207

Merit: 112

So this one's got me stumped.

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool coinotron.com:3334 -ewal user.worker -esm 2 -epsw pass -dpool stratum+tcp://dcr.suprnova.cc:9112 -dwal user.worker -dpsw pass -allpools 1

Quote

DCR: Stratum - connecting to 'dcr.suprnova.cc' <178.33.228.14> port 9112
ETH: Stratum - Connected
DCR: Stratum - Connected
ETH: Authorized
ETH: Job timeout, disconnect, retry in 20 sec...
DCR: Job timeout, disconnect, retry in 20 sec...
ETH: Stratum - connecting to 'coinotron.com' <178.217.186.125> port 3334
ETH: Stratum - Connected
ETH: Authorized
DCR: Stratum - connecting to 'dcr.suprnova.cc' <178.33.228.14> port 9112
DCR: Stratum - Connected
ETH: Job timeout, disconnect, retry in 20 sec...
DCR: Job timeout, disconnect, retry in 20 sec...
ETH: Stratum - connecting to 'coinotron.com' <178.217.186.125> port 3334
ETH: Stratum - Connected
ETH: Authorized
DCR: Stratum - connecting to 'dcr.suprnova.cc' <178.33.228.14> port 9112
DCR: Stratum - Connected
ETH: Job timeout, disconnect, retry in 20 sec...
DCR: Job timeout, disconnect, retry in 20 sec...
ETH: Stratum - connecting to 'coinotron.com' <178.217.186.125> port 3334
ETH: Stratum - Connected
ETH: Authorized
ETH: Job timeout, disconnect, retry in 20 sec...
DCR: Stratum - connecting to 'dcr.suprnova.cc' <178.33.228.14> port 9112
DCR: Stratum - Connected

Nintendocore

full member

Activity: 201

Merit: 100

It is good that versions renovate regularly and less shortages stand.

sam1

newbie

Activity: 5

Merit: 0

Wait for finding meaning of life while mining ETH and DCR in next version

Pustul

sr. member

Activity: 350

Merit: 250

Quote from: Claymore on April 21, 2016, 04:33:14 PM

Quote from: Pustul on April 21, 2016, 04:20:13 PM

Quote from: Zulucia on April 21, 2016, 03:53:52 PM

Quote from: citronick on April 21, 2016, 02:28:52 PM

Quote from: sam1 on April 21, 2016, 01:17:15 PM

Quote from: citronick on April 21, 2016, 01:14:11 PM

anyone can help me understand this "--farm-recheck" ?

Check for new task every x.xxx seconds

thanks

so, faster GPUs can use --farm-recheck 200 or 100 ?

It is better to use 100, that is to check every 100ms.

Claymore, does the --farm-recheck really change the way the miner mines? Because on ethminer-genoil with stratum, it only modifiy the rate at which hashing speed is calculated. On your miner though, the display of the hashing speed is not affected by this it seems.

--farm-recheck is not supported my my miner. Moreover, it is for HTTP to work with Stratum proxy, my miner uses Stratum directly.

Ok, that's what I thought but the messages talking about it made me doubt it. Thank you for the confirmation!

Flexystar

full member

Activity: 1092

Merit: 227

Waiting linux port....

Reinstall OS on all rigs for use miner)) LOL? Shocked

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: Pustul on April 21, 2016, 04:20:13 PM

Quote from: Zulucia on April 21, 2016, 03:53:52 PM

Quote from: citronick on April 21, 2016, 02:28:52 PM

Quote from: sam1 on April 21, 2016, 01:17:15 PM

Quote from: citronick on April 21, 2016, 01:14:11 PM

anyone can help me understand this "--farm-recheck" ?

Check for new task every x.xxx seconds

thanks

so, faster GPUs can use --farm-recheck 200 or 100 ?

It is better to use 100, that is to check every 100ms.

Claymore, does the --farm-recheck really change the way the miner mines? Because on ethminer-genoil with stratum, it only modifiy the rate at which hashing speed is calculated. On your miner though, the display of the hashing speed is not affected by this it seems.

--farm-recheck is not supported by my miner. Moreover, it is for HTTP to work with Stratum proxy, my miner uses Stratum directly.

Pustul

sr. member

Activity: 350

Merit: 250

Quote from: Zulucia on April 21, 2016, 03:53:52 PM

Quote from: citronick on April 21, 2016, 02:28:52 PM

Quote from: sam1 on April 21, 2016, 01:17:15 PM

Quote from: citronick on April 21, 2016, 01:14:11 PM

anyone can help me understand this "--farm-recheck" ?

Check for new task every x.xxx seconds

thanks

so, faster GPUs can use --farm-recheck 200 or 100 ?

It is better to use 100, that is to check every 100ms.

Claymore, does the --farm-recheck really change the way the miner mines? Because on ethminer-genoil with stratum, it only modifiy the rate at which hashing speed is calculated. On your miner though, the display of the hashing speed is not affected by this it seems.

Zulucia

newbie

Activity: 73

Merit: 0

Quote from: citronick on April 21, 2016, 02:28:52 PM

Quote from: sam1 on April 21, 2016, 01:17:15 PM

Quote from: citronick on April 21, 2016, 01:14:11 PM

anyone can help me understand this "--farm-recheck" ?

Check for new task every x.xxx seconds

thanks

so, faster GPUs can use --farm-recheck 200 or 100 ?

It is better to use 100, that is to check every 100ms.

gami82

newbie

Activity: 7

Merit: 0

No "sent hashrate" on dwarfpool with v3.2 !?

Marvell1

legendary

Activity: 2408

Merit: 1102

Leading Crypto Sports Betting & Casino Platform

Quote from: revelacaogr on April 21, 2016, 03:30:23 PM

Quote from: Claymore on April 21, 2016, 03:00:04 PM

Problems on DCR pools forced me to check my code again and again to be sure that these problems are not related to the miner and I rewrote some routines to improve Stratum support for Decred.

v3.2:

- reduced number of rejected shares for Decred-Stratum.
- miner sends its current hashrate to pool, some pools have "reported hashrate" column and you can see miner hashrate there.
- miner shows how long it takes pool to accept share.
- option "-r 1" closes miner and calls "reboot.bat" if some GPU failed, so you can create "reboot.bat" to perform any actions.
- Bug fixes, a few minor improvements.

I'm still working on failover and other new features.

man u r very active...
u deserve every penny .....
thks again

great chancges, any thoughts on setting it up to work with that solo mining proxy ?

CorePrime95

full member

Activity: 190

Merit: 101

I tested Claymore's ethminer vs the regular ethminer
R390 @1100/1500 win7 64 and Crimson 15.12
Normal ethminer: ca. 30Mh/s
Claymore's ethminer: ca. 31.5Mh/s
Indeed a speedup of 5%, excellent!!

madmartyk

legendary

Activity: 2688

Merit: 1030

Yes I am a pirate, 300 years too late!

Woo Hoo back to dual mining (I was getting about 30% rejects with 3.1).

revelacaogr

legendary

Activity: 1316

Merit: 1021

2009 Alea iacta est

Quote from: Claymore on April 21, 2016, 03:00:04 PM

Problems on DCR pools forced me to check my code again and again to be sure that these problems are not related to the miner and I rewrote some routines to improve Stratum support for Decred.

v3.2:

- reduced number of rejected shares for Decred-Stratum.
- miner sends its current hashrate to pool, some pools have "reported hashrate" column and you can see miner hashrate there.
- miner shows how long it takes pool to accept share.
- option "-r 1" closes miner and calls "reboot.bat" if some GPU failed, so you can create "reboot.bat" to perform any actions.
- Bug fixes, a few minor improvements.

I'm still working on failover and other new features.

man u r very active...
u deserve every penny .....
thks again

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1371. (Read 6590565 times)