Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1367. (Read 6590757 times)

I think optimisations for Fiji cards are still a todo. Claymore's last major release mainly improved slower cards.

with my hash this calc works fine

with this also:
http://ethereum-mining-calculator.com/

Is the only stratum port for suprnova diff 1 or am i missing something?

Result for me after a few hours (R9 Nano): more GPU load, more heat, same hashrate.
And repeated "outdated share found - skip"-messages.
Under these circumstances, no advantages and so I return to feeless genoil.

Yes, it says 2.5Eth at stock clock hashrates (for 15x 290), but you should earn about 5Eth. That calculator is totally wrong.  With overclocks, it's closer to 6Eth.

with stock clocks?
i dont think so

That calculator is completely wack.  You should get double the Ethereum output that it suggests.

For anyone interested, I am having best results/profitability on my R9 290 rigs with:
- AMD 15.7.1 Driver (only _extract_ installer package [do not install], load drivers thru Device Manager) - allows downclocking and results in the least GPU usage dips.
- Copy amdocl64.dll from AMD 15.12 to miner folder - brings up hashrate _very_ slightly
- Stilt's mining BIOS for 290 - lower power usage and slightly higher hashrate
- Downclock memory to 1125 (lower timing strap, results in the same performance as 1250 with lower power consumption)
- Overclock core as far as is stable (I use 1080mhz now; used to use 1100, but with increasing ambient temperatures have pulled back to 1080 for stability)
- decred intensity at 33 (lose ~300Kh/s Ethash in return for 50MH/s decred)

With version 3.2, I am getting ~0.5% DCR rejects, and essentially 0% Eth rejects.
31MH/s on Ethash and 500MH/s Decred for each GPU.
Ethereum pool effective hash is ~3% below reported (makes sense given tiny GPU usage dips and 2% devfee).

Best part is the stability.

Keep rockin' Claymore!

--

Claymore: Can you please add the share timer to rejected shares too?

--

revelacaogr/Lucky - Luciano: pool.mn doesn't actually have vardiff, their page header is lying.  Their stratum just stays at diff 1 permanently.  Only site with working vardiff I've seen is coinmine, but their reject rate is pretty bad from my testing.

That said, I'm using pool.mn right now as the profitability and reject rates have been the best.

0.3 for 2G is little

use this to see how much u mast earn +/-
http://cryptoage.com/en/%D0%B8%D0%BD%D1%81%D1%82%D1%80%D1%83%D0%BC%D0%B5%D0%BD%D1%82%D1%8B/%D0%BA%D0%B0%D0%BB%D1%8C%D0%BA-eth-dcr/2-uncategorised/568-claymore-double-mining-calculator-ethereum-decred.html

  Ok. Thank you. I'll try the pool "pool.mn" tomorrow. The "dcr.maxminers.net" I earned only about 0.3 DCR for half a day with about 2000 Mh / s

sorry pool.mn have auto vardiff and not maxminers
i prever pool.mn
1-1.5% rejects

dont change the driver
use  only the  opencl.dlls  from 15.12 end put it in the miners file...

I at Miner v3.2 has even 20-25% reject at the Suprnova ports:
Diff 1: http://dcr.suprnova.cc:9110
Diff 4: http://dcr.suprnova.cc:9111
  However, the dcr.maxminers.net:  „stratum+tcp://dcr.maxminers.net:7777“  I have only 0.84 rejected. Is it a problem exclusive to the pool ?

maxminers

Still getting around 10% rejection on DCR/Suprnova. Don't know if its miner's fault or Suprnova's. Can someone recommend a good DCR pool?

Problem solved as soon as I made the switch to Stratum.

Again, it is minor bug and you can mine. Start miner and wait.

Thank you for all the details! Haha I remember when I had the 7970 and 2x 290s in my mid tower, it was tight Led me to build a rig and add 2 more 290s and replace the three gpus in the tower by 270s to lower the heat. Anyway I ended up selling everything but the 7970 when altcoin mining became so unprofitable in 2014.

Back to eth mining I reinstalled the drivers after a nice cleanup and now the oc is working fine, I think my clocks were stuck before, that's why I didn't saw the difference. 1240 is really nice! I never was able to go beyond 1200 It seems 1650 memory is the max for my card. I've got 21.6 MH/s with 1150/1650, it's a nice improvement compared to stock! Oh and -etha 0 is definitively better for me, but maybe that's the reason you can oc more and in the end get a better hashrate.

I can see the rejects on the miners, very few.

Since loading the new version the 290x has 634 shares and 0 rejects, and the 280x's have 876 shares and 0 rejects

It's a minor bug, will be fixed in next update: miner sends incorrect version answer, then pool sends incorrect report about the error, therefore you see this warning. You still can mine, here is my command line that you can use as start point, very similar to sample from OP:

EthDcrMiner64.exe -epool coinotron.com:3344 -ewal Redhex.rig1 -esm 2 -epsw x -allpools 1

Thanks.  So you and dominuspro are both at ethermine.  I wish these pools would show rejects....maybe that's what is going on with dominuspro.