Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1373.

revelacaogr

legendary

Activity: 1316

Merit: 1021

2009 Alea iacta est

Quote from: qqqq on April 21, 2016, 06:09:21 AM

Recently i got on my all pc and all ver of miner on different pools

Code:

Stratum - Cannot connect to dcr.suprnova.cc port 2252
DCR: Stratum - Failed to connect, retry in 20 sec...

Code:

Stratum - Cannot connect to dcr.pool.mn port 4800
DCR: Stratum - Failed to connect, retry in 20 sec...

and

Code:

DCR: Job timeout, disconnect, retry in 20 sec...

ETH with ethermine pool is ok!

Code:

DCR: Stratum - connecting to 'dcr.pool.mn' <136.243.50.159> port 4800
ETH: 04/21/16-14:13:42 - New job (target 0x0000000112e0be82) from eu1.ethermine
org:4444
ETH - Total Speed: 28.801 Mh/s, Total Shares: 115, Rejected: 0, Time: 04:36
ETH: GPU80 28.801 Mh/s
DCR - Total Speed: 792.021 Mh/s, Total Shares: 1063, Rejected: 0
DCR: GPU0 792.021 Mh/s
ETH: 04/21/16-14:13:57 - SHARE FOUND - (GPU 0)
ETH: Share accepted!
ETH: 04/21/16-14:14:00 - New job (target 0x0000000112e0be82) from eu1.ethermine
org:4444
ETH - Total Speed: 28.832 Mh/s, Total Shares: 116, Rejected: 0, Time: 04:36
ETH: GPU0 28.832 Mh/s
DCR - Total Speed: 792.884 Mh/s, Total Shares: 1063, Rejected: 0
DCR: GPU0 792.884 Mh/s
Stratum - Cannot connect to dcr.pool.mn port 4800
DCR: Stratum - Failed to connect, retry in 20 sec...

it trying to connect and then it show this error. All of this working a few hours ago, i even did.t touching my miners.

any news???

kanoptx

sr. member

Activity: 406

Merit: 250

www.cryptocompare.com

Quote from: Claymore on April 21, 2016, 11:01:50 AM

Quote from: kanoptx on April 21, 2016, 10:14:56 AM

hey claymore, could you make one of these for decred and expanse? it would be cool and it should work, right?

This miner works like a charm. I dont mind the fees at all since it increased my hashrate by more than 3% without counting decred! Grin

You can mine expanse and decred, check OP or readme file:

...
Ethereum forks mining:

EthDcrMiner64.exe -epool exp-us.dwarfpool.com:8018 -ewal 0xd69af2a796a737a103f12d2f0bcc563a13900e6f -epsw x -allcoins -1
...

Just set your address add decred parameters to this sample command line.

oh! sorry

didn't see it.

thank you for this kickass miner Cheesy

hashine

newbie

Activity: 29

Merit: 0

Claymore, thanks for nice work, can you add power limit option?

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: kanoptx on April 21, 2016, 10:14:56 AM

hey claymore, could you make one of these for decred and expanse? it would be cool and it should work, right?

This miner works like a charm. I dont mind the fees at all since it increased my hashrate by more than 3% without counting decred! Grin

You can mine expanse and decred, check OP or readme file:

...
Ethereum forks mining:

EthDcrMiner64.exe -epool exp-us.dwarfpool.com:8018 -ewal 0xd69af2a796a737a103f12d2f0bcc563a13900e6f -epsw x -allcoins -1
...

Just set your address add decred parameters to this sample command line.

kanoptx

sr. member

Activity: 406

Merit: 250

www.cryptocompare.com

hey claymore, could you make one of these for decred and expanse? it would be cool and it should work, right?

This miner works like a charm. I dont mind the fees at all since it increased my hashrate by more than 3% without counting decred! Grin

_javi_

hero member

Activity: 968

Merit: 624

Still a manic miner

may someone post 15.12 dll files for OpenCL ? thanks

citronick

legendary

Activity: 1834

Merit: 1080

---- winter*juvia -----

Quote from: revelacaogr on April 21, 2016, 09:30:15 AM

Quote from: qqqq on April 21, 2016, 06:09:21 AM

Recently i got on my all pc and all ver of miner on different pools

Code:

Stratum - Cannot connect  to dcr.suprnova.cc port 2252
 DCR: Stratum - Failed to connect, retry in 20 sec...

Code:

Stratum - Cannot connect  to dcr.pool.mn port 4800
 DCR: Stratum - Failed to connect, retry in 20 sec...

and

Code:

DCR: Job timeout, disconnect, retry in 20 sec...

ETH with ethermine pool is ok!

Code:

 DCR: Stratum - connecting to 'dcr.pool.mn' <136.243.50.159> port 4800
ETH: 04/21/16-14:13:42 - New job (target 0x0000000112e0be82) from eu1.ethermine
org:4444
ETH - Total Speed: 28.801 Mh/s, Total Shares: 115, Rejected: 0, Time: 04:36
ETH: GPU80 28.801 Mh/s
 DCR - Total Speed: 792.021 Mh/s, Total Shares: 1063, Rejected: 0
 DCR: GPU0 792.021 Mh/s
ETH: 04/21/16-14:13:57 - SHARE FOUND - (GPU 0)
ETH: Share accepted!
ETH: 04/21/16-14:14:00 - New job (target 0x0000000112e0be82) from eu1.ethermine
org:4444
ETH - Total Speed: 28.832 Mh/s, Total Shares: 116, Rejected: 0, Time: 04:36
ETH: GPU0 28.832 Mh/s
 DCR - Total Speed: 792.884 Mh/s, Total Shares: 1063, Rejected: 0
 DCR: GPU0 792.884 Mh/s
Stratum - Cannot connect  to dcr.pool.mn port 4800
 DCR: Stratum - Failed to connect, retry in 20 sec...

it trying to connect and then it show this error. All of this working a few hours ago, i even did.t touching my miners.

the same here i cant connect....

anyone knows?
now i use http..

i am pool mining DCRs at zpool.ca - it uses Stratum

Works well with v1.2, v2 and v3.

Rejects about 8-9%% - seems consistent and I dont know how to solve this - I did inform the zpool op about it though.

revelacaogr

legendary

Activity: 1316

Merit: 1021

2009 Alea iacta est

Quote from: qqqq on April 21, 2016, 06:09:21 AM

Recently i got on my all pc and all ver of miner on different pools

Code:

Stratum - Cannot connect  to dcr.suprnova.cc port 2252
 DCR: Stratum - Failed to connect, retry in 20 sec...

Code:

Stratum - Cannot connect  to dcr.pool.mn port 4800
 DCR: Stratum - Failed to connect, retry in 20 sec...

and

Code:

DCR: Job timeout, disconnect, retry in 20 sec...

ETH with ethermine pool is ok!

Code:

 DCR: Stratum - connecting to 'dcr.pool.mn' <136.243.50.159> port 4800
ETH: 04/21/16-14:13:42 - New job (target 0x0000000112e0be82) from eu1.ethermine
org:4444
ETH - Total Speed: 28.801 Mh/s, Total Shares: 115, Rejected: 0, Time: 04:36
ETH: GPU80 28.801 Mh/s
 DCR - Total Speed: 792.021 Mh/s, Total Shares: 1063, Rejected: 0
 DCR: GPU0 792.021 Mh/s
ETH: 04/21/16-14:13:57 - SHARE FOUND - (GPU 0)
ETH: Share accepted!
ETH: 04/21/16-14:14:00 - New job (target 0x0000000112e0be82) from eu1.ethermine
org:4444
ETH - Total Speed: 28.832 Mh/s, Total Shares: 116, Rejected: 0, Time: 04:36
ETH: GPU0 28.832 Mh/s
 DCR - Total Speed: 792.884 Mh/s, Total Shares: 1063, Rejected: 0
 DCR: GPU0 792.884 Mh/s
Stratum - Cannot connect  to dcr.pool.mn port 4800
 DCR: Stratum - Failed to connect, retry in 20 sec...

it trying to connect and then it show this error. All of this working a few hours ago, i even did.t touching my miners.

the same here i cant connect....

anyone knows?
now i use http..

buitanthanh1979

newbie

Activity: 13

Merit: 0

Quote from: Mrga666 on April 21, 2016, 08:46:36 AM

I need help from anybody,

I am a big noob and as such I don't know how to configure the .bat file.
I would like to use eu1.ethermine.org:4444 server and I have r9 390x2 graphics card (2x 390), Windows 10 x64 15.12 driver.

Someone please help, I will gift u 0.5 eth coin if you help me.

you use Dual Ethereum+Decred or solo Ethereum

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: phzi on April 21, 2016, 08:40:02 AM

Quote from: Claymore on April 21, 2016, 08:19:28 AM

A bit strange approach, is not it? Just send worker name as second param and it would work like a charm.

Eth's mining methods are more then a bit strange (and inconsistent between every implementation), indeed.

2 requests (fairly trivial I think):
- show eth/dcr when printing Authorized
- show response time in ms for work submition and response e.g. Share Accepted (80ms)

Well, I will send worker name as third param then.
Ok, your requests will be added in next update.

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: murders10 on April 21, 2016, 08:52:51 AM

Quote from: thesaltonsea on April 21, 2016, 07:57:05 AM

Quote from: Haryford on April 21, 2016, 06:21:21 AM

Quote from: restless on April 21, 2016, 06:14:44 AM

I tried to use -wd 1, but can't make it to close the miner
tried -r -1
tried -r 0
When I mistype pool name (simulating dns /connectivity problem) it just keeps retrying to connect every 20sec, won't close the miner Sad

My miner does not close. It will hang the system. So I use -wd 0 to disable the watchdog, and -r -1 not to restart.

.
+1 , after ver. 3.0 i found my rig 2 times freezed after a crash, i will test with -wd 0 and -r -1 now

+1 same here windows totally freezes and crash sometime i have no unplug it to restart Embarrassed

When GPU fails, often Windows cannot work properly anymore and often it cannot even reboot normally.

murders10

member

Activity: 84

Merit: 10

Quote from: thesaltonsea on April 21, 2016, 07:57:05 AM

Quote from: Haryford on April 21, 2016, 06:21:21 AM

Quote from: restless on April 21, 2016, 06:14:44 AM

I tried to use -wd 1, but can't make it to close the miner
tried -r -1
tried -r 0
When I mistype pool name (simulating dns /connectivity problem) it just keeps retrying to connect every 20sec, won't close the miner Sad

My miner does not close. It will hang the system. So I use -wd 0 to disable the watchdog, and -r -1 not to restart.

.
+1 , after ver. 3.0 i found my rig 2 times freezed after a crash, i will test with -wd 0 and -r -1 now

+1 same here windows totally freezes and crash sometime i have no unplug it to restart Embarrassed

Mrga666

newbie

Activity: 10

Merit: 0

I need help from anybody,

I am a big noob and as such I don't know how to configure the .bat file.
I would like to use eu1.ethermine.org:4444 server and I have r9 390x2 graphics card (2x 390), Windows 10 x64 15.12 driver.

Someone please help, I will gift u 0.5 eth coin if you help me.

phzi

hero member

Activity: 700

Merit: 500

Quote from: Claymore on April 21, 2016, 08:19:28 AM

A bit strange approach, is not it? Just send worker name as second param and it would work like a charm.

Eth's mining methods are more then a bit strange (and inconsistent between every implementation), indeed.

2 requests (fairly trivial I think):
- show eth/dcr when printing Authorized
- show response time in ms for work submition and response e.g. Share Accepted (80ms)

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: PandaPanda! on April 21, 2016, 08:03:35 AM

@Claymore, i'm using your latest beta release. Will the -wd 1 -r -1 switches work?

And I have a loop in my startup batch file. So I have to just have a blank reboot.bat file in order for it to jump back to my original batch file loop
?

"-wd 1 -r -1" will work.

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: phzi on April 21, 2016, 07:46:00 AM

Quote from: Claymore on April 20, 2016, 10:50:19 AM

Quote from: phzi on April 20, 2016, 10:31:41 AM

Stratum method is called, "eth_submitHashrate." I posted about this earlier in this thread as well (post #569).

See here (eth-proxy relaying method):
https://github.com/Atrides/eth-proxy/blob/d993fc8db84dc09f25b72a34ce69b6977c88ac64/mining_libs/getwork_listener.py#L58-L62

Edit:
Also see (ethminer creating eth_submitHashrate commands):
https://github.com/ethereum/libethereum/blob/8b389757cfc2757965671fa8e080b32aaf65771b/ethminer/MinerAux.h#L536
https://github.com/ethereum/libethereum/blob/6d65d5d1412013381324826ea583e8b3fa9f5f3c/ethminer/FarmClient.h#L37-L47

Yes I found "eth_submitHashrate" but I'd like to check some miner that sends this command to see how it works. There is no any documentation about it but it seems it has two params: first is the hashrate, second is filled by random and it's strange, it must be worker name so pool can know who reports the hashrate.

I confirmed with dr_pra that the 2nd param is ignored (at least by ethpool/ethermine). If more then one worker connects via a stratum proxy, submitted hashrate doesn't work. If a single worker is used on a connection, the hashrate is assosiated with that worker.

A bit strange approach, is not it? Just send worker name as second param and it would work like a charm.

PandaPanda!

newbie

Activity: 35

Merit: 0

@Claymore, i'm using your latest beta release. Will the -wd 1 -r -1 switches work?

And I have a loop in my startup batch file. So I have to just have a blank reboot.bat file in order for it to jump back to my original batch file loop
?

thesaltonsea

newbie

Activity: 64

Merit: 0

Quote from: Haryford on April 21, 2016, 06:21:21 AM

Quote from: restless on April 21, 2016, 06:14:44 AM

I tried to use -wd 1, but can't make it to close the miner
tried -r -1
tried -r 0
When I mistype pool name (simulating dns /connectivity problem) it just keeps retrying to connect every 20sec, won't close the miner Sad

My miner does not close. It will hang the system. So I use -wd 0 to disable the watchdog, and -r -1 not to restart.

.
+1 , after ver. 3.0 i found my rig 2 times freezed after a crash, i will test with -wd 0 and -r -1 now

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: PandaPanda! on April 21, 2016, 07:11:19 AM

@Claymore I have a request.

I've noticed that you have an auto restart option now when one of the GPUs stops talking to the miner. However, when the program restarts, it hangs at the POOL connection part (i'm mining in ETH only mode). What I usually have to do when I encounter this, is close the program, and then restart it manually, then it works.

I have automated batch files to start your miner. Can you please add a command line switch which just quits the program rather than restarting it automatically when a GPU fails? Would be a huge help to me (and probably many others). I love your miner, and praise it on the eth forums. Much thanks

Already done via "-r 1" option, but it's not included in public release yet, it will be included in next update. This option closes miner and calls "reboot.bat" to reboot system, you can change reboot.bat so miner will just be closed (as if you use "-r -1") or do some other actions instead of reboot.

I have just tested restarting by watchdog, it connects to a pool correctly after restarting, so I cannot reproduce the issue you describe. Actually miner just starts itself with the same command line, so I don't see any reasons why it can fail to connect to a pool after restarting.

PandaPanda!

newbie

Activity: 35

Merit: 0

Quote from: PandaPanda! on April 21, 2016, 07:11:19 AM

@Claymore I have a request.

I've noticed that you have an auto restart option now when one of the GPUs stops talking to the miner. However, when the program restarts, it hangs at the POOL connection part (i'm mining in ETH only mode). What I usually have to do when I encounter this, is close the program, and then restart it manually, then it works.

I have automated batch files to start your miner. Can you please add a command line switch which just quits the program rather than restarting it automatically when a GPU fails? Would be a huge help to me (and probably many others). I love your miner, and praise it on the eth forums. Much thanks

Never mind. I just found the updated command line switches list. I hope adding "-wd 1 -r -1" will do what i asked for above. Thanks

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1373. (Read 6590757 times)