Author

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1393. (Read 6590718 times)

full member
Activity: 141
Merit: 100
ZOHEM | DECENTRALISED USER BEHAVIOUR DATA PROTOCOL
I switched back to the regular miner since the difficulty rose and price fell a little for DCR. The profits are 30% less now then a few days ago for DCR.



 90% likely Decred will be less than worthless within 7-10 days if not sooner. The market was already very small for it and now we are increasing the supply for sale dramatically while not bringing new buyers, and exponentially making it beyond reasonably difficult to mine for those who were in that community before we arrived. If it can recover after we stop mining it due to being less valuable than the devfee and lost eth hash it costs us to get, then the extreme low prices coming to it over the next week will look like the golden age to the original Decred folks.  Until we start mining it again after the recovery..
legendary
Activity: 3808
Merit: 1723
I switched back to the regular miner since the difficulty rose and price fell a little for DCR. The profits are 30% less now then a few days ago for DCR.

I would be nice to have a X11 + ETH miner.
newbie
Activity: 42
Merit: 0
Code:
ethpool: 
   EthDcrMiner64.exe -epool us1.ethpool.org:3333 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F -epsw x -dpool http://dcr.suprnova.cc:9111 -dwal Redhex.my -dpsw x
   you can also specify "-esm 1" option to enable "qtminer" mode, in this mode pool will display additional information about shares (accepted/rejected).

 dwarfpool:
   EthDcrMiner64.exe -epool eth-eu.dwarfpool.com:8008 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F -epsw x -dpool http://dcr.suprnova.cc:9111 -dwal Redhex.my -dpsw x
   you can also specify "-eworker YourWorkerName" option.

so we should change the ETH address that clear. but then there is Redhex.my ?

i dont see where to put worker name for suprnova at all.

can anybody explain ?

Redhex.my is his username.worker for supernova
legendary
Activity: 1526
Merit: 1000
the grandpa of cryptos
Code:
ethpool: 
   EthDcrMiner64.exe -epool us1.ethpool.org:3333 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F -epsw x -dpool http://dcr.suprnova.cc:9111 -dwal Redhex.my -dpsw x
   you can also specify "-esm 1" option to enable "qtminer" mode, in this mode pool will display additional information about shares (accepted/rejected).

 dwarfpool:
   EthDcrMiner64.exe -epool eth-eu.dwarfpool.com:8008 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F -epsw x -dpool http://dcr.suprnova.cc:9111 -dwal Redhex.my -dpsw x
   you can also specify "-eworker YourWorkerName" option.

so we should change the ETH address that clear. but then there is Redhex.my ?

i dont see where to put worker name for suprnova at all.

can anybody explain ?
hero member
Activity: 700
Merit: 500
Getting much lower DCR rejects (and it looks like the exact same eth hashrate) with -ethi 8 . Went from 15-25% rejects with -ethi 16 to ~5% with -ethi 8.
hero member
Activity: 1988
Merit: 593
Nicehash pool x11 good pay again, new dualminer ETH+x11 need  Wink http://www.whattomine.com
member
Activity: 114
Merit: 10
Hello Claymore.
Planned version for Linux?
Best Regards
member
Activity: 80
Merit: 10

1. It seems GPU thread hangs, so its speed is not updated. I will add timestamp on latest speed value and miner will show "0" speed if that time is too old. Also I will add watchdog for miner autorestart.

Please make choice of restarting whole computer. When GPU hangs (repeating exactly same hashrate for 3+ times) and I restart miner, GPU that was hanging starts hashing with exactly half speed. GPU reset via TRIXX has no effect. If I reboot, than everything is normal again. Thx.


+1 Sometimes just restarting doesn't help. It could be an option

-forcereboot X

X - number of attempts to restart the thread with no effect. If X=0 then "never"
legendary
Activity: 1764
Merit: 1024
v2.0 with Stratum for Decred and many improvements/fixes wil be available within 24 hours.

Features like Nvidia support? :O
donator
Activity: 1610
Merit: 1325
Miners developer
v2.0 with Stratum for Decred and many improvements/fixes wil be available within 24 hours.
hero member
Activity: 768
Merit: 505
Miner in the dough a little more than a day. It's okay for now. Over time, fading farm name on the pool. Usually after work to the author.
Supernova and stable work https: //dcr.maxminers.net and https://pool.mn/dcr. Less mistakes.

If you mean, that the miner suddenly stops sending worker name, then I confirm. Just saw this. It should be rig1 and rig2. But actually looks like an empty name.



I confirm this also.


Not even just dropping workername .... could even get the shares to my balance... even though miner said he is happely sending shares ... claymore pls fix this... restarting the client here and than cannot be the solution
sr. member
Activity: 736
Merit: 262
Me, Myself & I

1. It seems GPU thread hangs, so its speed is not updated. I will add timestamp on latest speed value and miner will show "0" speed if that time is too old. Also I will add watchdog for miner autorestart.

Please make choice of restarting whole computer. When GPU hangs (repeating exactly same hashrate for 3+ times) and I restart miner, GPU that was hanging starts hashing with exactly half speed. GPU reset via TRIXX has no effect. If I reboot, than everything is normal again. Thx.
legendary
Activity: 1316
Merit: 1021
2009 Alea iacta est
I am using the 1.2 version now. For the old version such as 1.0, I got lots of invalid shares. I change the intensity to 15 instead of 16 in Eth mining. Is that the intended function of the intensity?

eth -intensity  15 rejects 0

dcr -intensity 20

dcr diff 64 supr rejects 0

i think its about balance between the intensitys....

and ofcorse diff 64

sr. member
Activity: 661
Merit: 250
Testing on 4 280x @1050/1500
dcri 25

After 2 hours :
~79.5M on ETH + ~990M on DCR
0 rejected on ETH, ~14% rejected on DCR

~100w more at wall ( 1035w )

With official ETH miner, i'm at ~81-82M

See more after night.

17.4% rejected after 11h30 running ...
Not sure it's a good deal finally.

Better with changing suprnova port for DCR.
7.69% rejected after 45mn.
legendary
Activity: 2702
Merit: 1030
Yes I am a pirate, 300 years too late!
Can the miner be configured to work with ethermine.org/

Sure, i'm using it on ether mine.org

works fine!

Can you paste your cmd file?  Do you remove the password cmd?  I couldn't get it to work

Thanks
thDcrMiner64.exe -dbg 1 -esm 1 -epool us1.ethermine.org:4444 -ewal walletaddress.workername -epsw x

Seems to be working, takes a while for them to show up..  Thanks!!
sr. member
Activity: 294
Merit: 250
I am using the 1.2 version now. For the old version such as 1.0, I got lots of invalid shares. I change the intensity to 15 instead of 16 in Eth mining. Is that the intended function of the intensity?
newbie
Activity: 1
Merit: 0
    v 1.2
    important for R9 290/X 390/X, tested at 3x290.
    Consumption as compared to ether only above -20%, cards temperature- 5%.
    eth 0% rejected, dcr 5% (2 hour)
                     
                                  profit for 1 day:


  • dcri 20   eth 93      dcr 930     eth 9.7  $    dcr 1.258 $ = 10.958$
  • dcri 30   eth 91.6   dcr 1373    eth 9.56 $   dcr 1.912 $ = 11.472$
  • dcri 40   eth 87.7   dcr 1755    eth 9.15 $   dcr 2.438 $ = 11.588$
  • dcri 50   eth 82.8   dcr 2070    eth 8.64 $   dcr 2.876 $ = 11.516$
  • dcri 60   eth 77.9   dcr 2337    eth 8.13 $   dcr 3.255 $ = 11.385$
  • dcri 100  eth 62     dcr 3103    eth 6.47 $   dcr 4.321 $ = 10.791$

$ figures may vary due to different counting different calculators

He was counting on the exchange rate:
1 eth -8.5$
1 dcr -1.5$
newbie
Activity: 42
Merit: 0
Can the miner be configured to work with ethermine.org/

Sure, i'm using it on ether mine.org

works fine!

Can you paste your cmd file?  Do you remove the password cmd?  I couldn't get it to work

Thanks
thDcrMiner64.exe -dbg 1 -esm 1 -epool us1.ethermine.org:4444 -ewal walletaddress.workername -epsw x
legendary
Activity: 2702
Merit: 1030
Yes I am a pirate, 300 years too late!
Can the miner be configured to work with ethermine.org/

Sure, i'm using it on ether mine.org

works fine!

Can you paste your cmd file?  Do you remove the password cmd?  I couldn't get it to work

Thanks
legendary
Activity: 1764
Merit: 1024
Still no comment on Nvidia OCL support?

Don't hate the brand, hate the coins. Cry
Jump to: