Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1388.

dominuspro

full member

Activity: 201

Merit: 100

Quote from: citronick on April 17, 2016, 11:14:50 AM

Quote from: dominuspro on April 17, 2016, 11:04:05 AM

Quote from: citronick on April 17, 2016, 10:46:04 AM

Quote from: cryptoc19 on April 17, 2016, 10:38:20 AM

Does anyone have shares displayed correctly on ethermine.org ? I mean in the "Shares (Invalid / Valid / %)" column..
Claymore's miner does submit ( and only valids!

) and I am obviously getting paid for them, but they're not displayed like I said (tried both with v1.2 and with v2.0).

yes, i have same issue.

I am still paid but the dashboard (bottom page with graphs) doesn't report any hash and funny thing is the summary on top of the ethermine.org, it correctly sum up total mhs for all my rigs. I suspect its the way etherminer is coded but then again qtminer.exe works too, but not the dual miner.

Put -esm 1 in your bat Roll Eyes

thanks dominuspro for the tip.....

... but still dont work for me Sad

Mine 390 works without any problem on win7x64, crimson 15.12...
Everything reported properly poolside. It was allready with the first version of the miner.

bat file:

Code:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0xxxx.390 -epsw x -dpool stratum+tcp://dcr.suprnova.cc:2252 -dwal xxx.xxx1 -dpsw 1 -esm 1

Code:

ETH: 04/17/16-18:22:29 - New job (target 0x0000000112e0be82) from eu1.ethermine.org:4444
ETH - Total Speed: 31.997 Mh/s, Total Shares: 295, Rejected: 0, Time: 10:26
ETH: GPU0 31.997 Mh/s
DCR - Total Speed: 479.955 Mh/s, Total Shares: 2143, Rejected: 37
DCR: GPU0 479.955 Mh/s

citronick

legendary

Activity: 1834

Merit: 1080

---- winter*juvia -----

Quote from: dominuspro on April 17, 2016, 11:04:05 AM

Quote from: citronick on April 17, 2016, 10:46:04 AM

Quote from: cryptoc19 on April 17, 2016, 10:38:20 AM

Does anyone have shares displayed correctly on ethermine.org ? I mean in the "Shares (Invalid / Valid / %)" column..
Claymore's miner does submit ( and only valids!

) and I am obviously getting paid for them, but they're not displayed like I said (tried both with v1.2 and with v2.0).

yes, i have same issue.

I am still paid but the dashboard (bottom page with graphs) doesn't report any hash and funny thing is the summary on top of the ethermine.org, it correctly sum up total mhs for all my rigs. I suspect its the way etherminer is coded but then again qtminer.exe works too, but not the dual miner.

Put -esm 1 in your bat Roll Eyes

thanks dominuspro for the tip.....

... but still dont work for me Sad

dominuspro

full member

Activity: 201

Merit: 100

Quote from: citronick on April 17, 2016, 10:46:04 AM

Quote from: cryptoc19 on April 17, 2016, 10:38:20 AM

Does anyone have shares displayed correctly on ethermine.org ? I mean in the "Shares (Invalid / Valid / %)" column..
Claymore's miner does submit ( and only valids!

) and I am obviously getting paid for them, but they're not displayed like I said (tried both with v1.2 and with v2.0).

yes, i have same issue.

I am still paid but the dashboard (bottom page with graphs) doesn't report any hash and funny thing is the summary on top of the ethermine.org, it correctly sum up total mhs for all my rigs. I suspect its the way etherminer is coded but then again qtminer.exe works too, but not the dual miner.

Put -esm 1 in your bat Roll Eyes

citronick

legendary

Activity: 1834

Merit: 1080

---- winter*juvia -----

Quote from: cryptoc19 on April 17, 2016, 10:48:27 AM

Do you have the same problem using other miners (not Claymore's) ?

etherminer, qtminer all works ok.

But the Claymore v2 doesn't work.

However, on ETH and DCR mining, i am getting very good results on ethermine.org with no invalids.
DCR however gives me 8-9% invalids -- but this is probably due to zpool stratum which I mine DCR,
because other DCR pools, reports lower invalids %

I have replaced qtminer.exe on all my rigs with Claymore's DM v2, even at dual mining mode I am getting very stable performance from my 390s.

Trimegistus

legendary

Activity: 1565

Merit: 1027

I'm getting better results with this miner, compared to Genoil's or the Homestead versions.

My only problem is loosing 5% ETH shares when in dual mining mode.

But that might be related with the fact that I'm using a mix of 270x with 7950.

@Claymore, any progress optimizing your code for the 270x?

cryptoc19

newbie

Activity: 15

Merit: 0

Do you have the same problem using other miners (not Claymore's) ?

citronick

legendary

Activity: 1834

Merit: 1080

---- winter*juvia -----

Quote from: cryptoc19 on April 17, 2016, 10:38:20 AM

Does anyone have shares displayed correctly on ethermine.org ? I mean in the "Shares (Invalid / Valid / %)" column..
Claymore's miner does submit ( and only valids!

) and I am obviously getting paid for them, but they're not displayed like I said (tried both with v1.2 and with v2.0).

yes, i have same issue.

I am still paid but the dashboard (bottom page with graphs) doesn't report any hash and funny thing is the summary on top of the ethermine.org, it correctly sum up total mhs for all my rigs. I suspect its the way etherminer is coded but then again qtminer.exe works too, but not the dual miner.

MacT

full member

Activity: 141

Merit: 100

ZOHEM | DECENTRALISED USER BEHAVIOUR DATA PROTOCOL

Quote from: DuvajBalone on April 17, 2016, 03:04:49 AM

Quote from: zorvalth on April 16, 2016, 11:44:19 PM

@Claymore, Is it suppose to be better on R9 380 (tonga) cards?

48 hours of testing on equal rigs and the original miner and yours are making pretty much the same result.

Right not after 10 hours of the new version vs original qtminer:

Ballance: 0.4717089107482806 vs 0.4826856692655387

miners changed lead several time but the biggest lead was around 0.01 Ether

So there is no point of using this miner in ETH only mode, also power consumption is a little higher.

Most people are getting good gains with this miner with and without decred, a few are not. A new enhanced
qtminer seems to have come out today claiming 3-5% more hashrate, but only in ubuntu,

cryptoc19

newbie

Activity: 15

Merit: 0

Does anyone have shares displayed correctly on ethermine.org ? I mean in the "Shares (Invalid / Valid / %)" column..
Claymore's miner does submit ( and only valids!

) and I am obviously getting paid for them, but they're not displayed like I said (tried both with v1.2 and with v2.0).

olajos

newbie

Activity: 46

Merit: 0

Quote from: zorvalth on April 17, 2016, 09:47:24 AM

Quote from: olajos on April 17, 2016, 06:51:22 AM

Quote from: zorvalth on April 17, 2016, 06:27:59 AM

Quote from: olajos on April 17, 2016, 04:54:50 AM

Hello Claymore. i Have one rig with 2x380 and 1x290x
the 2 380 gives me different speed. why?
gpu0 380(20mh)
gpu1 380(18.9mh)
gpu2 290x (28.5mh)
the 2 cards are totally identical.
no matter that i am running on ether mode only or dual mining, with every version of your miner tried.

Minimize the miner and leave the desktop for a few minutes in idle, if you are using TeamViewer disconnect for a few minutes. Then check it again, they will be equal. Its not from his miner but because the others dont show separate hash for every card you dont notice it. One of the cards is being used to show the desktop.

ETH: GPU0 19.954 Mh/s, GPU1 18.990 Mh/s, GPU2 28.451 Mh/s

always get this. not matter the team viewer or anything.... i can send the log.

Are you sure they are exact make and model, same clock? Maybe the faster is samsung memory and the slower is elpida?

thanks dude
i found it. on one card there is elpida on the other card is hynix memory....
sorry for my ignorance....

zorvalth

full member

Activity: 223

Merit: 100

Quote from: olajos on April 17, 2016, 06:51:22 AM

Quote from: zorvalth on April 17, 2016, 06:27:59 AM

Quote from: olajos on April 17, 2016, 04:54:50 AM

Hello Claymore. i Have one rig with 2x380 and 1x290x
the 2 380 gives me different speed. why?
gpu0 380(20mh)
gpu1 380(18.9mh)
gpu2 290x (28.5mh)
the 2 cards are totally identical.
no matter that i am running on ether mode only or dual mining, with every version of your miner tried.

Minimize the miner and leave the desktop for a few minutes in idle, if you are using TeamViewer disconnect for a few minutes. Then check it again, they will be equal. Its not from his miner but because the others dont show separate hash for every card you dont notice it. One of the cards is being used to show the desktop.

ETH: GPU0 19.954 Mh/s, GPU1 18.990 Mh/s, GPU2 28.451 Mh/s

always get this. not matter the team viewer or anything.... i can send the log.

Are you sure they are exact make and model, same clock? Maybe the faster is samsung memory and the slower is elpida?

alevlaslo

hero member

Activity: 1988

Merit: 593

Quote from: AlexBoos on April 17, 2016, 07:18:02 AM

With pool Supernova has long been clear. There Ether and very poorly produced. Angry

on DCR

madmartyk

legendary

Activity: 2702

Merit: 1030

Yes I am a pirate, 300 years too late!

Quote from: knobson on April 17, 2016, 07:25:35 AM

!!! WARNING !!! You seem to be sending a large amount of INVALID shares ! Check your rigs, you might be mining the wrong algo and your hashrate could be displayed wrong! !!! WARNING !!!

Maybe it's something you did, I have been using the 2.0 for 12 hours now and everything is right where it should be.

knobson

hero member

Activity: 602

Merit: 500

!!! WARNING !!! You seem to be sending a large amount of INVALID shares ! Check your rigs, you might be mining the wrong algo and your hashrate could be displayed wrong! !!! WARNING !!!

AlexBoos

newbie

Activity: 41

Merit: 0

Quote from: alevlaslo on April 17, 2016, 06:00:49 AM

10 minutes on supernova stratum: 150 good shares, 100 bad

With pool Supernova has long been clear. There Ether and very poorly produced. Angry

olajos

newbie

Activity: 46

Merit: 0

Quote from: zorvalth on April 17, 2016, 06:27:59 AM

Quote from: olajos on April 17, 2016, 04:54:50 AM

Hello Claymore. i Have one rig with 2x380 and 1x290x
the 2 380 gives me different speed. why?
gpu0 380(20mh)
gpu1 380(18.9mh)
gpu2 290x (28.5mh)
the 2 cards are totally identical.
no matter that i am running on ether mode only or dual mining, with every version of your miner tried.

Minimize the miner and leave the desktop for a few minutes in idle, if you are using TeamViewer disconnect for a few minutes. Then check it again, they will be equal. Its not from his miner but because the others dont show separate hash for every card you dont notice it. One of the cards is being used to show the desktop.

ETH: GPU0 19.954 Mh/s, GPU1 18.990 Mh/s, GPU2 28.451 Mh/s

always get this. not matter the team viewer or anything.... i can send the log.

zorvalth

full member

Activity: 223

Merit: 100

Quote from: olajos on April 17, 2016, 04:54:50 AM

Hello Claymore. i Have one rig with 2x380 and 1x290x
the 2 380 gives me different speed. why?
gpu0 380(20mh)
gpu1 380(18.9mh)
gpu2 290x (28.5mh)
the 2 cards are totally identical.
no matter that i am running on ether mode only or dual mining, with every version of your miner tried.

Minimize the miner and leave the desktop for a few minutes in idle, if you are using TeamViewer disconnect for a few minutes. Then check it again, they will be equal. Its not from his miner but because the others dont show separate hash for every card you dont notice it. One of the cards is being used to show the desktop.

alevlaslo

hero member

Activity: 1988

Merit: 593

10 minutes on supernova stratum: 150 good shares, 100 bad

qqqq

legendary

Activity: 1596

Merit: 1011

After 12 hours on suprnova (2.0-2.2 %) Rej.

alevlaslo

hero member

Activity: 1988

Merit: 593

stratum+tcp://dcr.pool.mn:4800

only 1% rejects!

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1388. (Read 6590757 times)