Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 170.

big_daddy

hero member

Activity: 1680

Merit: 583

xUSD - The PRIVATE stable coin - Haven Protocol

Quote from: Fluchtzwerg on December 27, 2018, 08:16:28 AM

Hi guys!

My Brave Browser is complaining about the 12.0 windows version being harmful. I've never had that warning on the older versions, is this the new Brave version being overprotective or has the file been compromised somehow?

I have no problems downloading the "mega" file via Mozilla, usually Chrome gives headache when downloading miners
so try Mozilla, or even Explorer should be good

Fluchtzwerg

newbie

Activity: 3

Merit: 0

Hi guys!

My Brave Browser is complaining about the 12.0 windows version being harmful. I've never had that warning on the older versions, is this the new Brave version being overprotective or has the file been compromised somehow?

user0071

newbie

Activity: 11

Merit: 0

My miner is randomly turning completely off. Kernal Power error 41

So here's the situation. 5 GPU (2 570, 3 580) with a 1000w corsair HX1000i

Machine has been running great for the past 5 months. Swapped out a 580 that a friend wanted with a 470. Hard drive crashed, so i got my backup files and reinstalled windows ect. Saved the config file for Overdriven so i have the same clocks and everything. Even when running WITHOUT the new gpu (so 4 cards pulling 600 from the wall), it will crash and give me the kernal power error. The only difference between software in the old install and the new install is I used radeon adrenaline 18.12 instead of 18.9. Could the new driver be the problem? When the computer does restart, i get the radeon warning that default settings have been applied to the GPUS. Even with the overclock, I am getting 0 memory errors in hwinfo. I'm HOPING the answer is to DDU and go back to 18.9, but are there any other reasons ya'll can think of? Is there a way to see which gpu is causing the crash?

deforester

newbie

Activity: 20

Merit: 0

Winter is upon us and I need to either turn on an extra heater or dual mine Grin

Got free electricity, so I'm still mining ETH with my 6 RX580. Is there anything worth to dual mine to just hodl?

Dark Oopa

newbie

Activity: 83

Merit: 0

with memory at only 1850Mhz, 27Mhs is not bad

DrX

member

Activity: 233

Merit: 20

Quote from: Breesus on December 25, 2018, 04:41:02 PM

Quote from: big_daddy on December 25, 2018, 03:24:38 PM

Quote from: Breesus on December 25, 2018, 05:40:13 AM

Quote from: big_daddy on December 22, 2018, 11:54:40 AM

Quote from: Breesus on December 22, 2018, 05:45:27 AM

Quote from: big_daddy on December 21, 2018, 06:51:42 PM

Quote from: Breesus on December 21, 2018, 01:59:28 PM

hey guys, got a weird one today.

We built a new mining rig with rx 470 4GB (MSI Gaming X, Samsung memory and yeah, we're lucky enough to have free electricity), we copied the 1500 memory straps from 1500 to 2000 (like we always do), but for some odd reason we can't OC our cards memory above 1850Mhz without having the good old GPU#X got incorrect share etc... which means our cards are stuck around 27.2Mh/s.

You guys got any idea what the problem might be ? We have downvolted anything yet so our cards are definitely not power starved, I'm just a bit confused.

First of all, you have free elec
Even if those cards are doing 15Mh/s youll have good profit...

But ok

What is your config? Win ver., driver ver., etc

Yeah, I'm definitely not complaining about our situation (the rig belongs to me and my brother), I just thought I could squeeze a lil bit more out of our cards since I saw a lot of people having around 30mh/s with the same cards.

So we're using Windows 10 (with the latest update), the latest Claymore version as well and the latest stable AMD drivers (18.12.2). In terms of hardware we are using :

ASrock H81 Pro BTC 2.0
4GB of DDR3
a 1000W Aerocool Gold+ PSU
a Celeron G1840 CPU
and of course 6* MSI Gaming X RX 470@4GB

I managed to slightly increase the memory clock to 1860Mhz but I can't go beyond that.

those cards are bios modded or you are using an afterburner to set the clocks?

Hey and sorry for the late reply (Xmas and stuff!). We tried to things:

1. No bios mod, we simply increased the clocks and we ended up with ~25Mh/s with the clocks around 2050Mhz but with a shit ton of GPU#x got incorrect shares

2. We then bios mod the card ourselves (using Polaris Bios Editor), copying the 1500 strap values from 1500 to 2000. (we also tried with the 1750 values from 1750 to 2000 as well), and this is the situation where we are at at the moment, with 27.2Mh/s and a few GPU errors here and there on our GPU2.

This is our rig stats btw: https://ethermine.org/miners/f6c10F2CB2A2161efb43e4e0eabee60629329d5a/dashboard

Any advices would be much appreciated !

try the driver versions 18.xxxx
and with the compute patcher turn all the gpus in one shot to the compute mode and share if you get better results

We're already on the latest stable driver version, the 18.12.2 with everything on compute mode. We just tried the latest Clayrmore version (12.0), didn't make much difference, still stuck at 27.2mh/s on average with our memory clocks at 1850mhz

Did you read the guide by Mattthev?

https://bitcointalksearch.org/topic/guidetutorialxmrethhow-to-mod-bios-rx470570480580-vega-mining-1954245

Breesus

newbie

Activity: 50

Merit: 0

Quote from: big_daddy on December 25, 2018, 03:24:38 PM

Quote from: Breesus on December 25, 2018, 05:40:13 AM

Quote from: big_daddy on December 22, 2018, 11:54:40 AM

Quote from: Breesus on December 22, 2018, 05:45:27 AM

Quote from: big_daddy on December 21, 2018, 06:51:42 PM

Quote from: Breesus on December 21, 2018, 01:59:28 PM

hey guys, got a weird one today.

We built a new mining rig with rx 470 4GB (MSI Gaming X, Samsung memory and yeah, we're lucky enough to have free electricity), we copied the 1500 memory straps from 1500 to 2000 (like we always do), but for some odd reason we can't OC our cards memory above 1850Mhz without having the good old GPU#X got incorrect share etc... which means our cards are stuck around 27.2Mh/s.

You guys got any idea what the problem might be ? We have downvolted anything yet so our cards are definitely not power starved, I'm just a bit confused.

First of all, you have free elec
Even if those cards are doing 15Mh/s youll have good profit...

But ok

What is your config? Win ver., driver ver., etc

Yeah, I'm definitely not complaining about our situation (the rig belongs to me and my brother), I just thought I could squeeze a lil bit more out of our cards since I saw a lot of people having around 30mh/s with the same cards.

So we're using Windows 10 (with the latest update), the latest Claymore version as well and the latest stable AMD drivers (18.12.2). In terms of hardware we are using :

ASrock H81 Pro BTC 2.0
4GB of DDR3
a 1000W Aerocool Gold+ PSU
a Celeron G1840 CPU
and of course 6* MSI Gaming X RX 470@4GB

I managed to slightly increase the memory clock to 1860Mhz but I can't go beyond that.

those cards are bios modded or you are using an afterburner to set the clocks?

Hey and sorry for the late reply (Xmas and stuff!). We tried to things:

1. No bios mod, we simply increased the clocks and we ended up with ~25Mh/s with the clocks around 2050Mhz but with a shit ton of GPU#x got incorrect shares

2. We then bios mod the card ourselves (using Polaris Bios Editor), copying the 1500 strap values from 1500 to 2000. (we also tried with the 1750 values from 1750 to 2000 as well), and this is the situation where we are at at the moment, with 27.2Mh/s and a few GPU errors here and there on our GPU2.

This is our rig stats btw: https://ethermine.org/miners/f6c10F2CB2A2161efb43e4e0eabee60629329d5a/dashboard

Any advices would be much appreciated !

try the driver versions 18.xxxx
and with the compute patcher turn all the gpus in one shot to the compute mode and share if you get better results

We're already on the latest stable driver version, the 18.12.2 with everything on compute mode. We just tried the latest Clayrmore version (12.0), didn't make much difference, still stuck at 27.2mh/s on average with our memory clocks at 1850mhz

big_daddy

hero member

Activity: 1680

Merit: 583

xUSD - The PRIVATE stable coin - Haven Protocol

Quote from: king_pin on December 25, 2018, 03:43:17 PM

Weirdly enough a few days ago a couple of my 4GB GPUs (380/480) started saying there is not enough memory for DAG creation. Claymore's new v12 fixed that, but I it makes me wonder what the problem was?
The rigs are running Win10, Beta-Blockchain drivers and something like 4 out of ~50 4G rigs had this issue... wtf

same issue here
and the answer was only the v.12, talking on ETH mining, the other daggerhashimoto coins was rurring without any problems on the previous clay version

king_pin

sr. member

Activity: 416

Merit: 250

Weirdly enough a few days ago a couple of my 4GB GPUs (380/480) started saying there is not enough memory for DAG creation. Claymore's new v12 fixed that, but I it makes me wonder what the problem was?
The rigs are running Win10, Beta-Blockchain drivers and something like 4 out of ~50 4G rigs had this issue... wtf

big_daddy

hero member

Activity: 1680

Merit: 583

xUSD - The PRIVATE stable coin - Haven Protocol

Quote from: Breesus on December 25, 2018, 05:40:13 AM

Quote from: big_daddy on December 22, 2018, 11:54:40 AM

Quote from: Breesus on December 22, 2018, 05:45:27 AM

Quote from: big_daddy on December 21, 2018, 06:51:42 PM

Quote from: Breesus on December 21, 2018, 01:59:28 PM

hey guys, got a weird one today.

We built a new mining rig with rx 470 4GB (MSI Gaming X, Samsung memory and yeah, we're lucky enough to have free electricity), we copied the 1500 memory straps from 1500 to 2000 (like we always do), but for some odd reason we can't OC our cards memory above 1850Mhz without having the good old GPU#X got incorrect share etc... which means our cards are stuck around 27.2Mh/s.

You guys got any idea what the problem might be ? We have downvolted anything yet so our cards are definitely not power starved, I'm just a bit confused.

First of all, you have free elec
Even if those cards are doing 15Mh/s youll have good profit...

But ok

What is your config? Win ver., driver ver., etc

Yeah, I'm definitely not complaining about our situation (the rig belongs to me and my brother), I just thought I could squeeze a lil bit more out of our cards since I saw a lot of people having around 30mh/s with the same cards.

So we're using Windows 10 (with the latest update), the latest Claymore version as well and the latest stable AMD drivers (18.12.2). In terms of hardware we are using :

ASrock H81 Pro BTC 2.0
4GB of DDR3
a 1000W Aerocool Gold+ PSU
a Celeron G1840 CPU
and of course 6* MSI Gaming X RX 470@4GB

I managed to slightly increase the memory clock to 1860Mhz but I can't go beyond that.

those cards are bios modded or you are using an afterburner to set the clocks?

Hey and sorry for the late reply (Xmas and stuff!). We tried to things:

1. No bios mod, we simply increased the clocks and we ended up with ~25Mh/s with the clocks around 2050Mhz but with a shit ton of GPU#x got incorrect shares

2. We then bios mod the card ourselves (using Polaris Bios Editor), copying the 1500 strap values from 1500 to 2000. (we also tried with the 1750 values from 1750 to 2000 as well), and this is the situation where we are at at the moment, with 27.2Mh/s and a few GPU errors here and there on our GPU2.

This is our rig stats btw: https://ethermine.org/miners/f6c10F2CB2A2161efb43e4e0eabee60629329d5a/dashboard

Any advices would be much appreciated !

try the driver versions 18.xxxx
and with the compute patcher turn all the gpus in one shot to the compute mode and share if you get better results

Breesus

newbie

Activity: 50

Merit: 0

Quote from: big_daddy on December 22, 2018, 11:54:40 AM

Quote from: Breesus on December 22, 2018, 05:45:27 AM

Quote from: big_daddy on December 21, 2018, 06:51:42 PM

Quote from: Breesus on December 21, 2018, 01:59:28 PM

hey guys, got a weird one today.

We built a new mining rig with rx 470 4GB (MSI Gaming X, Samsung memory and yeah, we're lucky enough to have free electricity), we copied the 1500 memory straps from 1500 to 2000 (like we always do), but for some odd reason we can't OC our cards memory above 1850Mhz without having the good old GPU#X got incorrect share etc... which means our cards are stuck around 27.2Mh/s.

You guys got any idea what the problem might be ? We have downvolted anything yet so our cards are definitely not power starved, I'm just a bit confused.

First of all, you have free elec
Even if those cards are doing 15Mh/s youll have good profit...

But ok

What is your config? Win ver., driver ver., etc

Yeah, I'm definitely not complaining about our situation (the rig belongs to me and my brother), I just thought I could squeeze a lil bit more out of our cards since I saw a lot of people having around 30mh/s with the same cards.

So we're using Windows 10 (with the latest update), the latest Claymore version as well and the latest stable AMD drivers (18.12.2). In terms of hardware we are using :

ASrock H81 Pro BTC 2.0
4GB of DDR3
a 1000W Aerocool Gold+ PSU
a Celeron G1840 CPU
and of course 6* MSI Gaming X RX 470@4GB

I managed to slightly increase the memory clock to 1860Mhz but I can't go beyond that.

those cards are bios modded or you are using an afterburner to set the clocks?

Hey and sorry for the late reply (Xmas and stuff!). We tried to things:

1. No bios mod, we simply increased the clocks and we ended up with ~25Mh/s with the clocks around 2050Mhz but with a shit ton of GPU#x got incorrect shares

2. We then bios mod the card ourselves (using Polaris Bios Editor), copying the 1500 strap values from 1500 to 2000. (we also tried with the 1750 values from 1750 to 2000 as well), and this is the situation where we are at at the moment, with 27.2Mh/s and a few GPU errors here and there on our GPU2.

This is our rig stats btw: https://ethermine.org/miners/f6c10F2CB2A2161efb43e4e0eabee60629329d5a/dashboard

Any advices would be much appreciated !

Frizz23

hero member

Activity: 1162

Merit: 500

Quote from: big_daddy on December 25, 2018, 01:22:02 AM

Quote from: Frizz23 on December 24, 2018, 05:43:54 PM

what do you mine in dual guys?

Still waiting for a good dual perspective one
Cause, ruining gpus with dual and paying more elec bills is not so smart thing to do in this bear

I used to do xvg back in the day, turned out great cause of herbalife style followers and the huge pump.
But these days, I just dont know...

big_daddy

hero member

Activity: 1680

Merit: 583

xUSD - The PRIVATE stable coin - Haven Protocol

Quote from: Frizz23 on December 24, 2018, 05:43:54 PM

what do you mine in dual guys?

Still waiting for a good dual perspective one
Cause, ruining gpus with dual and paying more elec bills is not so smart thing to do in this bear

Frizz23

hero member

Activity: 1162

Merit: 500

what do you mine in dual guys?

br2459

full member

Activity: 269

Merit: 102

I second that ProPow. Will help us small miner keep competitive.

mu_enrico

copper member

Activity: 2324

Merit: 2142

Slots Enthusiast & Expert

Dear oh lord @Claymore, please support ProgPow.. hopefully with all previous cards (both AMD and NVIDIA) supported.
Me still using your software, happily pay for dev fee.
This is my Christmas wish!

miner582

newbie

Activity: 41

Merit: 0

Merry Christmas everyone,

First, thanks to Claymore for this new update.

Second and last, why people talk about loyalty, I am still using claymore in all my rigs, if the market is not good enough right now this is a complete different issue, so I appreciatte all you guys keep in crypto world.

Regards

xelbyb

jr. member

Activity: 101

Merit: 1

Quote from: Claymore on December 24, 2018, 05:15:46 AM

v12.0 for Linux is available for downloading too.

for xmr can you expect from you?

FFI2013

hero member

Activity: 906

Merit: 507

Quote from: adaseb on December 24, 2018, 03:15:37 AM

I guess one indicator proving that GPU mining is almost dead is the lack of replies in this thread whenever Claymore released a new version of his software.

Been over 12 hours since V12 is released and I am counting only 7 replies.

If this was a year ago, I would of had to go thru 7 pages of replies instead of 7.

Either way, Claymore thanks for keeping up the developement and reduced fees.

No I think it's everyone is either running phoenixminer or finminer because miners who where loyal and called out anyone who tried to go around claymore's dev have been asking for a update for months now with no reply same as his CN miner

sxemini

member

Activity: 1558

Merit: 69

Quote from: Mr Duong on December 24, 2018, 07:55:12 AM

Quote from: Claymore on December 23, 2018, 01:16:48 PM

v12.0:

- zero devfee for all 2GB and 3GB cards in all operating systems.
- reduced devfee for dual mode, now it is 1%, same as for ETH-only mode.
- a bit reduced required GPU memory (both AMD and NVIDIA) so you can mine ETH a bit longer on cards that don't have enough memory.
- added version for CUDA 10.0, it is a bit faster for latest 20xx NVIDIA cards.
- a few minor bug fixes and improvements.

Linux version will be available a bit later.

oh funny No fee for VGA 2G 3G cannot mining ETH,ETC

You can mine other coins like callisto with this cards Roll Eyes

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 170. (Read 6590718 times)