Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 216.

RuslanK35

newbie

Activity: 4

Merit: 0

Good day everyone Wink

I have a few questions. Help me please.
1. How to set up ASM correctly? I have all AMD RX 570 RX 580 4GB cards, Eth only, Ethermine pool (is this the best pool for Eth?). Anyone uses ASM 2 for such cards? And about dcri. How best to prescribe fixed or in auto mode?
2. I use ssl Ethermine pool. Does SSL slow down the encryption process (more stale shares example )?
3. My config for Rx 570 580 4gb
EthDcrMiner64.exe -epool ssl://eu1.ethermine.org:5555 -ewal 0x1 -epsw x -cclock 1150 -cvddc 850,850,850,850,850,850 -mclock 2040,2050,2040,2050,2040,2040 -mvddc 850,850,850,850,850,850
Can you recommend what to add to it for stability and more efficiency.

Thank you for your help.

Ruster87

newbie

Activity: 13

Merit: 0

Quote from: bithead007 on June 27, 2018, 07:54:52 AM

Quote from: Ruster87 on June 24, 2018, 06:36:45 PM

Quote from: bithead007 on June 24, 2018, 12:11:26 PM

So I've got one machine with pretty bad mouse/sprite lagging. It starts when Ethereum mining starts. This machine was working fine and I had to rebuild it with a fresh Windows 10 install.

It's Windows 10, latest, all patches. ULPS is off, I have never used ethi so not thinking I need to start now. I did try ethi 1 and the hash rate dropped significantly and still lagging. Visual effects in Win 10 are off. I've tried everything I can think of and could use some ideas. GEForce software isn't installed (or at least I don't see it anyplace). Mix of RX580 cards and a couple of GTX 1060's. Radeon driver is the recent .5.1 and Nvidia is the latest one.

Help!

Thanks,
CJ

biostar board? check your task manager, is system interrupts cpu usage high?

Thanks, I already turned off PCI AER so that isn't it. Any other ideas?

CJ

I doubt so, how did you turn it off? check your event viewer if it is flooded with whea_error

maxime506

newbie

Activity: 45

Merit: 0

Quote from: MagicSmoker on June 27, 2018, 05:32:01 PM

So, I got a peculiar problem. I have an Onda D1800 mobo with (4) 2GB RX 560 that has been chugging away on MUSIC for months now with no issue. Today I shut it down just to plug it into a UPS and upon restarting it the first 2 GPUs are only hashing at ~0.3MH/s instead of the usual 14.2MH/s, but I'm drawing the same 300W from the wall, as if all 4 cards are going full blast. This was with 18.3.4 Adrenalin drivers, Windows 1709 and custom clocks/voltages applied through OverDrivenTool (cards are also BIOS-modded and pixel-patched). Oh, and Windows Update was blocked. After several restarts, checking compute mode is still enabled, that the cards don't have the infamous Error 43 or whatever it is that Windows reports when it stops recognizing them, etc., I decided to go full retard and unblock Windows Update. 3 hours later - yes, 3 hours - and I now have 18.5.1 Adrenalin, Windows 1803, and I even switched from v11.6 to v11.8 of your miner but still no joy.

I have occasionally had an issue where 1 or 2 cards hash at a lower rate - but not ~0.3MH/s - after a hard reboot from, e.g., a power outage, but simply restarting the rig a 2nd time and ensuring the correct profile is loaded for each card in OverDrivenTool solved it. I also could have sworn I saw a reference to the same problem of 1 or more cards hashing at an unusually low rate somewhere in this thread earlier, but I'm guessing it would have to be a few hundred pages back and while I do try to catch up on the last few pages of a long thread to make sure I'm not asking a redundant question, >100 pages is a bit much.

So, has this been seen before, or should I move on to the even more painful process of moving cards around to see if the issue follows the cards or the slots?

UPDATE - I just tried running xmr-stak 2.4.4 and all cards are hashing away normally, so the plot thickens.

Use blockchain driver instead. It's the best for 8 GPUs or fewer.

And add -eres 0 since 2gb cards are about to fail at Epoch 95.

MagicSmoker

full member

Activity: 420

Merit: 184

So, I got a peculiar problem. I have an Onda D1800 mobo with (4) 2GB RX 560 that has been chugging away on MUSIC for months now with no issue. Today I shut it down just to plug it into a UPS and upon restarting it the first 2 GPUs are only hashing at ~0.3MH/s instead of the usual 14.2MH/s, but I'm drawing the same 300W from the wall, as if all 4 cards are going full blast. This was with 18.3.4 Adrenalin drivers, Windows 1709 and custom clocks/voltages applied through OverDrivenTool (cards are also BIOS-modded and pixel-patched). Oh, and Windows Update was blocked. After several restarts, checking compute mode is still enabled, that the cards don't have the infamous Error 43 or whatever it is that Windows reports when it stops recognizing them, etc., I decided to go full retard and unblock Windows Update. 3 hours later - yes, 3 hours - and I now have 18.5.1 Adrenalin, Windows 1803, and I even switched from v11.6 to v11.8 of your miner but still no joy.

I have occasionally had an issue where 1 or 2 cards hash at a lower rate - but not ~0.3MH/s - after a hard reboot from, e.g., a power outage, but simply restarting the rig a 2nd time and ensuring the correct profile is loaded for each card in OverDrivenTool solved it. I also could have sworn I saw a reference to the same problem of 1 or more cards hashing at an unusually low rate somewhere in this thread earlier, but I'm guessing it would have to be a few hundred pages back and while I do try to catch up on the last few pages of a long thread to make sure I'm not asking a redundant question, >100 pages is a bit much.

So, has this been seen before, or should I move on to the even more painful process of moving cards around to see if the issue follows the cards or the slots?

UPDATE - I just tried running xmr-stak 2.4.4 and all cards are hashing away normally, so the plot thickens.

andreykx

newbie

Activity: 15

Merit: 0

Radeon R7 370, mining EXP - the miner crashes when starting to mine devfee.
Also, it detects the GPU as 3Gb, not 4Gb (still tries to mine devfee, though).

Adrenalin 18.5.1, Win7, 32Gb pagefile, env variables set.

Code:

22:20:10:206	1320	Check and remove old log files...
22:20:10:210	1320	args: -allcoins 1 -ewal ffca6794f123a989648d85d0657f750b4798283c/1 -epool exp-eu.dwarfpool.com:8018 
22:20:10:213	1320	
22:20:10:215	1320	ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
22:20:10:218	1320	º                Claymore's Dual GPU Miner - v11.8               º
22:20:10:221	1320	º              ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK             º
22:20:10:224	1320	ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ¼
22:20:10:228	1320	
22:20:10:230	1320	b591 
22:20:10:433	1320	ETH: 1 pool is specified
22:20:10:436	1320	Main Ethereum pool is exp-eu.dwarfpool.com:8018
22:20:10:439	1320	DCR: 0 pool is specified
22:20:10:680	1320	OpenCL platform: AMD Accelerated Parallel Processing
22:20:10:683	1320	OpenCL platform: Intel(R) OpenCL
22:20:10:687	1320	OpenCL initializing...

22:20:10:690	1320	AMD Cards available: 1 
22:20:10:693	1320	GPU #0: Pitcairn (AMD Radeon (TM) R7 370 Series), 3072 MB available, 16 compute units (pci bus 1:0:0)
22:20:10:696	1320	POOL/SOLO version
22:20:10:699	1320	Platform: Windows
22:20:10:749	1320	start building OpenCL program for GPU 0...
22:20:10:780	1320	done
22:20:11:001	1320	GPU #0: algorithm ASM 1
22:20:11:005	1320	cudaGetDeviceCount failed (35, CUDA driver version is insufficient for CUDA runtime version), probably no CUDA devices
22:20:11:008	1320	No NVIDIA CUDA GPUs detected.
22:20:11:012	1320	Total cards: 1 
22:20:15:098	1320	No NVIDIA cards in the list, NVML library will not be used.
22:20:16:154	1320	SSL: Imported 56 certificates from local storage
22:20:16:259	1320	No pool specified for Decred! Ethereum-only mining mode is enabled

22:20:16:265	1320	ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)

22:20:16:269	1320	ETH: eth-proxy stratum mode
22:20:16:273	1320	"-allcoins" option is set, default pools will be used for devfee, check "Readme" file for details.
22:20:16:277	1320	Watchdog enabled
22:20:16:281	1320	Remote management (READ-ONLY MODE) is enabled on port 3333
22:20:16:285	1320	

22:20:16:290	1320	You did not specify -dcri values directly, so they will be detected automatically
22:20:16:294	1320	Automatic detection of best -dcri values started, please wait...

22:20:16:356	15a4	ETH: Stratum - connecting to 'exp-eu.dwarfpool.com' <37.48.109.37> port 8018 (unsecure)
22:20:16:471	15a4	sent: {"worker": "eth1.0", "jsonrpc": "2.0", "params": ["ffca6794f123a989648d85d0657f750b4798283c/1", ""], "id": 2, "method": "eth_submitLogin"}

22:20:16:476	15a4	ETH: Stratum - Connected (exp-eu.dwarfpool.com:8018) (unsecure)
22:20:16:731	15a4	buf: {"id":2,"jsonrpc":"2.0","result":true}

22:20:16:736	15a4	ETH: Authorized
22:20:16:740	15a4	sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

22:20:16:883	15a4	buf: {"result":["0x847fb857fbc108b3609142f074bf020d8f1dbce72bca09d92c036b1e6485c7f8","0x1730dd810f27fdefcac730fcab75814b7286002ecf541af5cdf7875440203215","0x0000000225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"],"jsonrpc":"2.0","id":3}


22:20:16:930	13a8	Setting DAG epoch #41...
22:20:18:255	13a8	Setting DAG epoch #41 for GPU0
22:20:18:259	13a8	Create GPU buffer for GPU0
22:20:23:500	13a8	GPU0 DAG creation time - 5225 ms
22:20:23:505	13a8	Setting DAG epoch #41 for GPU0 done
22:20:26:894	15a4	ETH: checking pool connection...
22:20:26:898	15a4	sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

22:20:27:383	15a4	buf: {"result":["0x847fb857fbc108b3609142f074bf020d8f1dbce72bca09d92c036b1e6485c7f8","0x1730dd810f27fdefcac730fcab75814b7286002ecf541af5cdf7875440203215","0x0000000225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"],"jsonrpc":"2.0","id":3}


22:20:35:083	13a8	gd 0.80
22:20:36:893	15a4	sent: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0xe64673", "0x000000000000000000000000000000000000000000000000000000000daddfa5"]}

22:20:36:909	15a4	ETH: checking pool connection...
22:20:36:913	15a4	sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

22:20:37:420	15a4	buf: {"id":6,"jsonrpc":"2.0","result":true}


22:20:37:445	71c	GPU #0: apply best detected -dcri value: 64
22:20:37:451	71c	Automatic detection of best -dcri values completed
22:20:37:800	15a4	buf: {"result":["0x847fb857fbc108b3609142f074bf020d8f1dbce72bca09d92c036b1e6485c7f8","0x1730dd810f27fdefcac730fcab75814b7286002ecf541af5cdf7875440203215","0x0000000225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"],"jsonrpc":"2.0","id":3}


22:20:40:454	71c	em hbt: 0, fm hbt: 62, 
22:20:40:458	71c	watchdog - thread 0 (gpu0), hb time 16
22:20:40:461	71c	watchdog - thread 1 (gpu0), hb time 296
22:20:40:466	9c8	GPU0 t=61C fan=23%
22:20:44:448	15a4	buf: {"result":["0x3adaf121174d67059316817f020b0ec15f2badd6a12e5f7c107301a6064f9840","0x1730dd810f27fdefcac730fcab75814b7286002ecf541af5cdf7875440203215","0x0000000225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"],"jsonrpc":"2.0","id":0}


22:20:44:453	15a4	ETH: 06/27/18-22:20:44 - New job from exp-eu.dwarfpool.com:8018
22:20:44:457	15a4	target: 0x0000000225c17d04 (diff: 2000MH), epoch 41(1.32GB)
22:20:44:461	15a4	ETH - Total Speed: 15.127 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
22:20:44:467	15a4	ETH: GPU0 15.127 Mh/s

...

22:38:45:589	17bc	DevFee: ETH: Stratum - connecting to 'us1.ethermine.org' <18.219.59.155> port 5555 (SSL/TLS)
22:38:48:573	15a4	ETH: checking pool connection...
22:38:48:577	15a4	sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

22:38:49:607	15a4	buf: {"result":["0x11ec24fdab1318a342467c9aed4969ee16e9a27b3098ce480cf717396ce45441","0x1730dd810f27fdefcac730fcab75814b7286002ecf541af5cdf7875440203215","0x0000000225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"],"jsonrpc":"2.0","id":3}


22:38:49:607	17bc	cert subject: /OU=Domain Control Validated/OU=EssentialSSL Wildcard/CN=*.ethermine.org
22:38:49:614	17bc	cert issuer: /C=GB/ST=Greater Manchester/L=Salford/O=COMODO CA Limited/CN=COMODO RSA Domain Validation Secure Server CA
22:38:49:618	17bc	SSL/TLS encryption is enabled
22:38:49:624	17bc	sent: devfee auth
22:38:49:628	17bc	DevFee: ETH: Stratum - Connected (us1.ethermine.org:5555) (SSL/TLS)
22:38:49:793	17bc	buf: {"id":2,"jsonrpc":"2.0","result":true}

22:38:49:798	17bc	ETH: Authorized
22:38:49:802	17bc	sent: {"id":3,"jsonrpc":"2.0","method":"eth_getWork","params":[]}

22:38:49:977	17bc	buf: {"id":3,"jsonrpc":"2.0","result":["0xda86c705aecf1b87c6a3386c547cb80f0bed7321f3ddca788f6fbcd55c0a97ef","0x52341cf7371faf9a5a0105914ad69f04b0cabfc51d12a2a28a00d5b808ea4e5c","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x597e2c"]}

22:38:49:982	17bc	DevFee: start mining
22:38:50:347	16e0	Setting DAG epoch #195...
22:38:52:630	17bc	buf: {"id":0,"jsonrpc":"2.0","result":["0xf7b0d6beddcf5975970482482932ed0432a62382acae7b9db3f83c19f04059fd","0x52341cf7371faf9a5a0105914ad69f04b0cabfc51d12a2a28a00d5b808ea4e5c","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x597e2d"]}

22:38:52:635	17bc	DevFee: ETH: 06/27/18-22:38:52 - New job from us1.ethermine.org:5555
22:38:52:639	17bc	DevFee: target: 0x0000000112e0be82 (diff: 4000MH)
22:38:52:910	16e0	Setting DAG epoch #195 for GPU0
22:38:52:915	16e0	Create GPU buffer for GPU0
22:38:52:943	16e0	GPU0, OpenCL error -4 (0) - cannot create DAG on GPU

22:38:53:619	17bc	buf: {"id":0,"jsonrpc":"2.0","result":["0x11fa4716bbdfb4a6f89bd6e8d6a71eed0d6787463f83056b04d48fcd03e31df5","0x52341cf7371faf9a5a0105914ad69f04b0cabfc51d12a2a28a00d5b808ea4e5c","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x597e2d"]}

22:38:53:623	17bc	DevFee: ETH: 06/27/18-22:38:53 - New job from us1.ethermine.org:5555
22:38:53:628	17bc	DevFee: target: 0x0000000112e0be82 (diff: 4000MH)
22:38:55:947	16e0	Set global fail flag, failed GPU0
22:38:55:952	16e0	GPU 0 failed
22:38:55:957	13a8	Setting DAG epoch #195 for GPU0
22:38:55:978	13a8	GPU0, OpenCL error -4 (0) - cannot create DAG on GPU

22:38:57:714	15a4	sent: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x0", "0x000000000000000000000000000000000000000000000000000000000daddfa5"]}

22:38:58:588	15a4	ETH: checking pool connection...
22:38:58:592	15a4	sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

22:38:58:654	15a4	buf: {"id":6,"jsonrpc":"2.0","result":true}


22:38:58:983	13a8	Set global fail flag, failed GPU0
22:38:58:988	13a8	GPU 0 failed
22:38:59:642	15a4	buf: {"result":["0x11ec24fdab1318a342467c9aed4969ee16e9a27b3098ce480cf717396ce45441","0x1730dd810f27fdefcac730fcab75814b7286002ecf541af5cdf7875440203215","0x0000000225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"],"jsonrpc":"2.0","id":3}


22:39:08:603	15a4	ETH: checking pool connection...
22:39:08:607	15a4	sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

22:39:08:693	15a4	buf: {"result":["0x11ec24fdab1318a342467c9aed4969ee16e9a27b3098ce480cf717396ce45441","0x1730dd810f27fdefcac730fcab75814b7286002ecf541af5cdf7875440203215","0x0000000225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"],"jsonrpc":"2.0","id":3}


22:39:10:979	71c	em hbt: 0, fm hbt: 0, 
22:39:10:983	71c	watchdog - thread 0 (gpu0), hb time 14991
22:39:10:987	71c	watchdog - thread 1 (gpu0), hb time 14991
22:39:10:992	71c	WATCHDOG: GPU error, you need to restart miner :( 
22:39:12:264	71c	Restarting OK, exit...

If I change GPU_FORCE_64BIT_PTR to 1, however, it detects 4Gb of memory, but crashes on devfee silently:

Code:

23:32:52:812	9d0	Check and remove old log files...
23:32:52:816	9d0	args: -allcoins 1 -ewal ffca6794f123a989648d85d0657f750b4798283c/1 -epool exp-eu.dwarfpool.com:8018 
23:32:52:818	9d0	
23:32:52:821	9d0	ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
23:32:52:824	9d0	º                Claymore's Dual GPU Miner - v11.8               º
23:32:52:827	9d0	º              ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK             º
23:32:52:829	9d0	ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ¼
23:32:52:832	9d0	
23:32:52:834	9d0	b591 
23:32:53:037	9d0	ETH: 1 pool is specified
23:32:53:040	9d0	Main Ethereum pool is exp-eu.dwarfpool.com:8018
23:32:53:044	9d0	DCR: 0 pool is specified
23:32:53:756	9d0	OpenCL platform: AMD Accelerated Parallel Processing
23:32:53:759	9d0	OpenCL platform: Intel(R) OpenCL
23:32:53:762	9d0	OpenCL initializing...

23:32:53:766	9d0	AMD Cards available: 1 
23:32:53:770	9d0	GPU #0: Pitcairn (AMD Radeon (TM) R7 370 Series), 4096 MB available, 16 compute units (pci bus 1:0:0)
23:32:53:772	9d0	POOL/SOLO version
23:32:53:775	9d0	Platform: Windows
23:32:53:927	9d0	start building OpenCL program for GPU 0...
23:32:53:959	9d0	done
23:32:54:180	9d0	GPU #0: algorithm ASM 1
23:32:54:183	9d0	cudaGetDeviceCount failed (35, CUDA driver version is insufficient for CUDA runtime version), probably no CUDA devices
23:32:54:186	9d0	No NVIDIA CUDA GPUs detected.
23:32:54:192	9d0	Total cards: 1 
23:32:58:196	9d0	No NVIDIA cards in the list, NVML library will not be used.
23:32:59:252	9d0	SSL: Imported 56 certificates from local storage
23:32:59:277	151c	ETH: Stratum - connecting to 'exp-eu.dwarfpool.com' <37.48.109.37> port 8018 (unsecure)
23:32:59:346	151c	sent: {"worker": "eth1.0", "jsonrpc": "2.0", "params": ["ffca6794f123a989648d85d0657f750b4798283c/1", ""], "id": 2, "method": "eth_submitLogin"}

23:32:59:350	151c	ETH: Stratum - Connected (exp-eu.dwarfpool.com:8018) (unsecure)
23:32:59:357	9d0	No pool specified for Decred! Ethereum-only mining mode is enabled

23:32:59:363	9d0	ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)

23:32:59:367	9d0	ETH: eth-proxy stratum mode
23:32:59:370	9d0	"-allcoins" option is set, default pools will be used for devfee, check "Readme" file for details.
23:32:59:376	9d0	Watchdog enabled
23:32:59:381	9d0	Remote management (READ-ONLY MODE) is enabled on port 3333
23:32:59:384	9d0	

23:32:59:389	9d0	You did not specify -dcri values directly, so they will be detected automatically
23:32:59:395	9d0	Automatic detection of best -dcri values started, please wait...

23:32:59:403	151c	buf: {"id":2,"jsonrpc":"2.0","result":true}

23:32:59:407	151c	ETH: Authorized
23:32:59:411	151c	sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

23:32:59:464	151c	buf: {"result":["0x8760049f8aec78492cd3894359f383da88fea1040b924382ec459a625b30ca9d","0x1730dd810f27fdefcac730fcab75814b7286002ecf541af5cdf7875440203215","0x0000000225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"],"jsonrpc":"2.0","id":3}


23:32:59:522	1c8	Setting DAG epoch #41...
23:33:00:820	1c8	Setting DAG epoch #41 for GPU0
23:33:00:824	1c8	Create GPU buffer for GPU0
23:33:06:059	1c8	GPU0 DAG creation time - 5220 ms
23:33:06:064	1c8	Setting DAG epoch #41 for GPU0 done
23:33:09:477	151c	ETH: checking pool connection...
23:33:09:484	151c	sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

23:33:09:531	151c	buf: {"result":["0x8760049f8aec78492cd3894359f383da88fea1040b924382ec459a625b30ca9d","0x1730dd810f27fdefcac730fcab75814b7286002ecf541af5cdf7875440203215","0x0000000225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"],"jsonrpc":"2.0","id":3}


23:33:16:513	1c8	gd 0.72
23:33:17:053	143c	GPU #0: apply best detected -dcri value: 50
23:33:17:057	143c	Automatic detection of best -dcri values completed
23:33:19:477	151c	sent: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0xe6e9c5", "0x0000000000000000000000000000000000000000000000000000000017024390"]}

23:33:19:493	151c	ETH: checking pool connection...
23:33:19:496	151c	sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

23:33:19:526	151c	buf: {"id":6,"jsonrpc":"2.0","result":true}


23:33:19:572	151c	buf: {"result":["0x8760049f8aec78492cd3894359f383da88fea1040b924382ec459a625b30ca9d","0x1730dd810f27fdefcac730fcab75814b7286002ecf541af5cdf7875440203215","0x0000000225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"],"jsonrpc":"2.0","id":3}


23:33:23:061	143c	em hbt: 0, fm hbt: 62, 
23:33:23:065	143c	watchdog - thread 0 (gpu0), hb time 375
23:33:23:069	143c	watchdog - thread 1 (gpu0), hb time 94
23:33:23:073	1374	GPU0 t=60C fan=21%
23:33:29:507	151c	ETH: checking pool connection...
23:33:29:511	151c	sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

23:33:29:557	151c	buf: {"result":["0x8760049f8aec78492cd3894359f383da88fea1040b924382ec459a625b30ca9d","0x1730dd810f27fdefcac730fcab75814b7286002ecf541af5cdf7875440203215","0x0000000225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"],"jsonrpc":"2.0","id":3}


23:33:39:492	151c	sent: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0xe6db7a", "0x0000000000000000000000000000000000000000000000000000000017024390"]}

23:33:39:523	151c	ETH: checking pool connection...
23:33:39:526	151c	sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

23:33:39:541	151c	buf: {"id":6,"jsonrpc":"2.0","result":true}


23:33:39:587	151c	buf: {"result":["0x8760049f8aec78492cd3894359f383da88fea1040b924382ec459a625b30ca9d","0x1730dd810f27fdefcac730fcab75814b7286002ecf541af5cdf7875440203215","0x0000000225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"],"jsonrpc":"2.0","id":3}


23:33:49:538	151c	ETH: checking pool connection...
23:33:49:542	151c	sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

23:33:49:589	151c	buf: {"result":["0x8760049f8aec78492cd3894359f383da88fea1040b924382ec459a625b30ca9d","0x1730dd810f27fdefcac730fcab75814b7286002ecf541af5cdf7875440203215","0x0000000225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"],"jsonrpc":"2.0","id":3}


23:33:53:074	143c	em hbt: 0, fm hbt: 78, 
23:33:53:078	143c	watchdog - thread 0 (gpu0), hb time 546
23:33:53:082	143c	watchdog - thread 1 (gpu0), hb time 280
23:33:53:092	1374	GPU0 t=71C fan=36%
23:33:59:507	151c	sent: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0xe6cf80", "0x0000000000000000000000000000000000000000000000000000000017024390"]}

23:33:59:553	151c	ETH: checking pool connection...
23:33:59:557	151c	sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

23:33:59:562	151c	buf: {"id":6,"jsonrpc":"2.0","result":true}


23:33:59:605	151c	buf: {"result":["0x8760049f8aec78492cd3894359f383da88fea1040b924382ec459a625b30ca9d","0x1730dd810f27fdefcac730fcab75814b7286002ecf541af5cdf7875440203215","0x0000000225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"],"jsonrpc":"2.0","id":3}


23:34:00:008	151c	buf: {"result":["0xba936d1b05d0c0ff253ff031a420974f194515aee91177c59b2c88852d8bfe4e","0x1730dd810f27fdefcac730fcab75814b7286002ecf541af5cdf7875440203215","0x0000000225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"],"jsonrpc":"2.0","id":0}


23:34:00:012	151c	ETH: 06/27/18-23:34:00 - New job from exp-eu.dwarfpool.com:8018
23:34:00:015	151c	target: 0x0000000225c17d04 (diff: 2000MH), epoch 41(1.32GB)
23:34:00:020	151c	ETH - Total Speed: 15.133 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:01
23:34:00:024	151c	ETH: GPU0 15.133 Mh/s

...

23:50:58:254	159c	DevFee: ETH: Stratum - connecting to 'eth-eu.dwarfpool.com' <178.33.35.1> port 8008 (unsecure)
23:50:58:315	159c	sent: devfee auth
23:50:58:321	159c	DevFee: ETH: Stratum - Connected (eth-eu.dwarfpool.com:8008) (unsecure)
23:50:58:365	159c	buf: {"id":2,"jsonrpc":"2.0","result":true}

23:50:58:369	159c	ETH: Authorized
23:50:58:374	159c	sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

23:50:58:428	159c	buf: {"result":["0x8814f0c439ff96f13da15f2afea49e6a6854b77b1d98eff25f1b50c7cc5e152f","0x52341cf7371faf9a5a0105914ad69f04b0cabfc51d12a2a28a00d5b808ea4e5c","0x0000000225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"],"jsonrpc":"2.0","id":3}


23:50:58:432	159c	DevFee: start mining
23:50:58:753	1c8	Setting DAG epoch #195...
23:51:01:110	151c	ETH: checking pool connection...
23:51:01:114	151c	sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

23:51:01:162	151c	buf: {"result":["0xa5b9440908e75772f1aa4ff600bda31de52c0c425042685a83be233389ffa3c2","0x1730dd810f27fdefcac730fcab75814b7286002ecf541af5cdf7875440203215","0x0000000225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"],"jsonrpc":"2.0","id":3}


23:51:01:267	1c8	Setting DAG epoch #195 for GPU0
23:51:01:271	1c8	Create GPU buffer for GPU0
23:51:08:443	159c	DevFee: ETH: checking pool connection...
23:51:08:447	159c	sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

23:51:08:495	159c	buf: {"result":["0x8814f0c439ff96f13da15f2afea49e6a6854b77b1d98eff25f1b50c7cc5e152f","0x52341cf7371faf9a5a0105914ad69f04b0cabfc51d12a2a28a00d5b808ea4e5c","0x0000000225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"],"jsonrpc":"2.0","id":3}


23:51:10:479	159c	buf: {"result":["0x8a2c8dafdc3527a1e0dff1a35a193defa6c884eb8b4fa6f55f2c8522a8c8ad41","0x52341cf7371faf9a5a0105914ad69f04b0cabfc51d12a2a28a00d5b808ea4e5c","0x0000000225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"],"jsonrpc":"2.0","id":0}


23:51:10:484	159c	DevFee: ETH: 06/27/18-23:51:10 - New job from eth-eu.dwarfpool.com:8008
23:51:10:488	159c	DevFee: target: 0x0000000225c17d04 (diff: 2000MH)
23:51:11:126	151c	ETH: checking pool connection...
23:51:11:133	151c	sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

23:51:11:181	151c	buf: {"result":["0xa5b9440908e75772f1aa4ff600bda31de52c0c425042685a83be233389ffa3c2","0x1730dd810f27fdefcac730fcab75814b7286002ecf541af5cdf7875440203215","0x0000000225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"],"jsonrpc":"2.0","id":3}


23:51:11:417	1c8	GPU0 DAG creation time - 10057 ms
23:51:11:422	1c8	Setting DAG epoch #195 for GPU0 done

I include the miner in my software, so it's best when it works "by default".
Could it, for example, mine EXP devfee, like it used to do in v10.6? Or predict/handle the reallocation failure somehow?

Passing -allcoins -1 or -allcoins epoch works, but the first one annoyingly delays first hashrate results for the user, and supplying the epoch number is tricky. Also, I'm now sure how to avoid breaking things for users that don't need it.

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: Balthazar on June 27, 2018, 02:58:48 AM

Claymore
Users are still reporting random crashes in -esm 3 mode.
https://miningclub.info/threads/etherdig-net-pps-vs-hvpps-i-ne-tolko.40761/page-3#post-1022348
https://miningclub.info/threads/etherdig-net-pps-vs-hvpps-i-ne-tolko.40761/page-3#post-1034974
This may happen in 2-3 hours hours, few days or even not happen at all.
Typical description looks like "I've connected my farm there, and got my Claymore's miner crashed few hours later. So I switched to another pool".
There is no such problem with -esm 1 mode, as well as no issues with another software running in EthereumStratum mode. Ethminer is rock stable, for example... Though, on the other hand, it has some hardware compatibility issues.

Any log files or any way how to reproduce it? You already mentioned this issue in past, I checked sources and did some tests but could not find any problems related to "-esm 3" mode.

bithead007

newbie

Activity: 22

Merit: 0

Quote from: Ruster87 on June 24, 2018, 06:36:45 PM

Quote from: bithead007 on June 24, 2018, 12:11:26 PM

So I've got one machine with pretty bad mouse/sprite lagging. It starts when Ethereum mining starts. This machine was working fine and I had to rebuild it with a fresh Windows 10 install.

It's Windows 10, latest, all patches. ULPS is off, I have never used ethi so not thinking I need to start now. I did try ethi 1 and the hash rate dropped significantly and still lagging. Visual effects in Win 10 are off. I've tried everything I can think of and could use some ideas. GEForce software isn't installed (or at least I don't see it anyplace). Mix of RX580 cards and a couple of GTX 1060's. Radeon driver is the recent .5.1 and Nvidia is the latest one.

Help!

Thanks,
CJ

biostar board? check your task manager, is system interrupts cpu usage high?

Thanks, I already turned off PCI AER so that isn't it. Any other ideas?

CJ

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: androstan1234 on June 26, 2018, 02:08:07 PM

It looks like the miner hangs when switching to devfee mining:

Quote

ETH - Total Speed: 402.169 Mh/s, Total Shares: 333(33+22+30+21+28+23+23+25+21+21+37+49), Rejected: 0(0+0+0+0+0+0+0+0+0+0+0+0), Time: 01:06
ETH: GPU0 29.756 Mh/s, GPU1 30.996 Mh/s, GPU2 30.673 Mh/s, GPU3 30.417 Mh/s, GPU4 29.860 Mh/s, GPU5 29.126 Mh/s, GPU6 30.232 Mh/s, GPU7 30.252 Mh/s, GPU8 30.238 Mh/s, GPU9 30.201 Mh/s, GPU10 50.376 Mh/s, GPU11 50.043 Mh/s
Incorrect ETH shares: none
1 minute average ETH total speed: 402.443 Mh/s
Pool switches: ETH - 0
Current ETH share target: 0x00000000ffb34c02 (diff: 4300MH), epoch 195(2.52GB)
Max ETH share diff found: 97.799T
Current -dcri values: -dcri 8,10,8,18,20,10,8,10,8,12,30,30
GPU0 t=75C fan=100%, GPU1 t=73C fan=100%, GPU2 t=73C fan=100%, GPU3 t=67C fan=100%, GPU4 t=65C fan=59%, GPU5 t=68C fan=61%, GPU6 t=72C fan=100%, GPU7 t=74C fan=100%, GPU8 t=67C fan=44%, GPU9 t=66C fan=31%; GPU10 t=64C fan=40%, GPU11 t=67C fan=45%
ETH: 06/26/18-11:37:55 - SHARE FOUND - (GPU 5) (DIFF: 14.889G)
DevFee: ETH: Stratum - connecting to 'eth-eu.dwarfpool.com' <91.134.50.158> port 8008 (unsecure)
Minimal speed ("-minspeed" option) was set to 370 MH/s. Miner cannot reach this speed for 5 minutes, need to restart miner!
ETH: Connection lost, retry in 5 sec...
GPU #0: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 1:0:0)
GPU #1: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 2:0:0)
GPU #2: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 3:0:0)
GPU #3: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 4:0:0)
GPU #4: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 5:0:0)
GPU #5: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 7:0:0)
GPU #6: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 8:0:0)
GPU #7: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 9:0:0)
GPU #8: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 10:0:0)
GPU #9: Ellesmere (Radeon RX 580 Series), 8192 MB available, 36 compute units (pci bus 11:0:0)
GPU #10: GeForce GTX 1080 Ti, 11264 MB available, 28 compute units, capability: 6.1 (pci bus 12:0:0)
GPU #11: GeForce GTX 1080 Ti, 11264 MB available, 28 compute units, capability: 6.1 (pci bus 13:0:0)
ETH - Total Speed: 220.363 Mh/s, Total Shares: 334(33+22+30+21+29+25+23+25+22+23+38+50), Rejected: 0(0+0+0+0+0+0+0+0+0+0+0+0), Time: 01:25
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 29.869 Mh/s, GPU5 29.087 Mh/s, GPU6 0.000 Mh/s, GPU7 0.000 Mh/s, GPU8 30.337 Mh/s, GPU9 30.200 Mh/s, GPU10 50.549 Mh/s, GPU11 50.321 Mh/s
Incorrect ETH shares: none
1 minute average ETH total speed: 220.493 Mh/s
Pool switches: ETH - 0
Max ETH share diff found: 97.799T
Current -dcri values: -dcri 8,10,8,18,20,10,8,10,8,12,30,30
DevFee: ETH: Stratum - Connected (eth-eu.dwarfpool.com:8008) (unsecure)

Any idea how to prevent this?

20 log lines for 19 minutes? Try to apply this (from FAQ):

- Miner freezes if I put cursor to its window in Windows 10 until any key is pressed. Sometimes miner freezes randomly until any key is pressed.
You should make some changes in Windows:
https://superuser.com/questions/555160/windows-command-prompt-freezing-on-focus
https://superuser.com/questions/419717/windows-command-prompt-freezing-randomly?rq=1
https://superuser.com/questions/1051821/command-prompt-random-pause?rq=1

Ruster87

newbie

Activity: 13

Merit: 0

Quote from: gooppoop on June 26, 2018, 04:00:03 PM

Quote from: androstan1234 on June 26, 2018, 02:08:07 PM

It looks like the miner hangs when switching to devfee mining:

Quote

ETH - Total Speed: 402.153 Mh/s, Total Shares: 332, Rejected: 0, Time: 01:06
ETH: GPU0 29.765 Mh/s, GPU1 30.986 Mh/s, GPU2 30.675 Mh/s, GPU3 30.431 Mh/s, GPU4 29.839 Mh/s, GPU5 29.084 Mh/s, GPU6 30.319 Mh/s, GPU7 29.837 Mh/s, GPU8 30.286 Mh/s, GPU9 30.216 Mh/s, GPU10 50.664 Mh/s, GPU11 50.050 Mh/s
GPU0 t=75C fan=100%, GPU1 t=73C fan=100%, GPU2 t=72C fan=100%, GPU3 t=67C fan=100%, GPU4 t=65C fan=59%, GPU5 t=68C fan=61%, GPU6 t=72C fan=100%, GPU7 t=75C fan=100%, GPU8 t=67C fan=44%, GPU9 t=66C fan=31%; GPU10 t=64C fan=40%, GPU11 t=67C fan=45%
ETH: 06/26/18-11:37:34 - SHARE FOUND - (GPU 11) (DIFF: 9.114G)
ETH: Share accepted (109 ms)!
GPU #0: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 1:0:0)
GPU #1: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 2:0:0)
GPU #2: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 3:0:0)
GPU #3: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 4:0:0)
GPU #4: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 5:0:0)
GPU #5: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 7:0:0)
GPU #6: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 8:0:0)
GPU #7: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 9:0:0)
GPU #8: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 10:0:0)
GPU #9: Ellesmere (Radeon RX 580 Series), 8192 MB available, 36 compute units (pci bus 11:0:0)
GPU #10: GeForce GTX 1080 Ti, 11264 MB available, 28 compute units, capability: 6.1 (pci bus 12:0:0)
GPU #11: GeForce GTX 1080 Ti, 11264 MB available, 28 compute units, capability: 6.1 (pci bus 13:0:0)
ETH - Total Speed: 402.169 Mh/s, Total Shares: 333(33+22+30+21+28+23+23+25+21+21+37+49), Rejected: 0(0+0+0+0+0+0+0+0+0+0+0+0), Time: 01:06
ETH: GPU0 29.756 Mh/s, GPU1 30.996 Mh/s, GPU2 30.673 Mh/s, GPU3 30.417 Mh/s, GPU4 29.860 Mh/s, GPU5 29.126 Mh/s, GPU6 30.232 Mh/s, GPU7 30.252 Mh/s, GPU8 30.238 Mh/s, GPU9 30.201 Mh/s, GPU10 50.376 Mh/s, GPU11 50.043 Mh/s
Incorrect ETH shares: none
1 minute average ETH total speed: 402.443 Mh/s
Pool switches: ETH - 0
Current ETH share target: 0x00000000ffb34c02 (diff: 4300MH), epoch 195(2.52GB)
Max ETH share diff found: 97.799T
Current -dcri values: -dcri 8,10,8,18,20,10,8,10,8,12,30,30
GPU0 t=75C fan=100%, GPU1 t=73C fan=100%, GPU2 t=73C fan=100%, GPU3 t=67C fan=100%, GPU4 t=65C fan=59%, GPU5 t=68C fan=61%, GPU6 t=72C fan=100%, GPU7 t=74C fan=100%, GPU8 t=67C fan=44%, GPU9 t=66C fan=31%; GPU10 t=64C fan=40%, GPU11 t=67C fan=45%
ETH: 06/26/18-11:37:55 - SHARE FOUND - (GPU 5) (DIFF: 14.889G)
DevFee: ETH: Stratum - connecting to 'eth-eu.dwarfpool.com' <91.134.50.158> port 8008 (unsecure)
Minimal speed ("-minspeed" option) was set to 370 MH/s. Miner cannot reach this speed for 5 minutes, need to restart miner!
ETH: Connection lost, retry in 5 sec...
GPU #0: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 1:0:0)
GPU #1: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 2:0:0)
GPU #2: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 3:0:0)
GPU #3: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 4:0:0)
GPU #4: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 5:0:0)
GPU #5: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 7:0:0)
GPU #6: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 8:0:0)
GPU #7: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 9:0:0)
GPU #8: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 10:0:0)
GPU #9: Ellesmere (Radeon RX 580 Series), 8192 MB available, 36 compute units (pci bus 11:0:0)
GPU #10: GeForce GTX 1080 Ti, 11264 MB available, 28 compute units, capability: 6.1 (pci bus 12:0:0)
GPU #11: GeForce GTX 1080 Ti, 11264 MB available, 28 compute units, capability: 6.1 (pci bus 13:0:0)
ETH - Total Speed: 220.363 Mh/s, Total Shares: 334(33+22+30+21+29+25+23+25+22+23+38+50), Rejected: 0(0+0+0+0+0+0+0+0+0+0+0+0), Time: 01:25
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 29.869 Mh/s, GPU5 29.087 Mh/s, GPU6 0.000 Mh/s, GPU7 0.000 Mh/s, GPU8 30.337 Mh/s, GPU9 30.200 Mh/s, GPU10 50.549 Mh/s, GPU11 50.321 Mh/s
Incorrect ETH shares: none
1 minute average ETH total speed: 220.493 Mh/s
Pool switches: ETH - 0
Max ETH share diff found: 97.799T
Current -dcri values: -dcri 8,10,8,18,20,10,8,10,8,12,30,30
DevFee: ETH: Stratum - Connected (eth-eu.dwarfpool.com:8008) (unsecure)

Any idea how to prevent this?

Remove "-minspeed" option

I'm surprised you can sleep well at night with GPUS at those temperatures.

MaxMidnite

newbie

Activity: 143

Merit: 0

Quote from: Claymore on June 15, 2018, 07:37:14 AM

NOTE:
If you use old version of the miner (less than 10.2) and mine ETH or ETC - please upgrade and use v10.2 or higher. Old versions don't support DAG epoch higher than #199, this value can be lower if you use non-zero "-eres" option value (it is "2" by default).
See v10.2 description in "History.txt" for details.

Long time no see?

ermis1975

member

Activity: 198

Merit: 10

I have 2 1070 cards. I want to know the best claymore settings for mining with them.

Balthazar

legendary

Activity: 3108

Merit: 1359

Claymore

Users are still reporting random crashes in -esm 3 mode.

https://miningclub.info/threads/etherdig-net-pps-vs-hvpps-i-ne-tolko.40761/page-3#post-1022348
https://miningclub.info/threads/etherdig-net-pps-vs-hvpps-i-ne-tolko.40761/page-3#post-1034974

This may happen in 2-3 hours hours, few days or even not happen at all.

Typical description looks like "I've connected my farm there, and got my Claymore's miner crashed few hours later. So I switched to another pool".

There is no such problem with -esm 1 mode, as well as no issues with another software running in EthereumStratum mode. Ethminer is rock stable, for example... Though, on the other hand, it has some hardware compatibility issues.

skyline_king

sr. member

Activity: 602

Merit: 250

I want to know I have 2 GPU GPU0 1060 3gb and GPU1 1070ti
want to mine with GPU1 only and leave the GPU0 Idle
should i add -di 1 to your bat file (same line as the rest)

DireWolfM14

copper member

Activity: 2338

Merit: 4543

Join the world-leading crypto sportsbook NOW!

A reliable source recommends 2.6gb per card, plus another 10 or 12.

Quote from: bigdaddymccarron on June 26, 2018, 09:02:14 PM

Quote from: DireWolfM14 on June 25, 2018, 10:06:39 PM

@bigdaddymccarron, could it be your swap file is not big enough for the DAG files? I'm no expert on Ubuntu, but sometimes we overlook the simplest things.

I will check that, I saw something the other day that indicated it should be 22 gb.

bigdaddymccarron

member

Activity: 71

Merit: 20

Quote from: DireWolfM14 on June 25, 2018, 10:06:39 PM

@bigdaddymccarron, could it be your swap file is not big enough for the DAG files? I'm no expert on Ubuntu, but sometimes we overlook the simplest things.

I will check that, I saw something the other day that indicated it should be 22 gb.

Jeeperz74

newbie

Activity: 14

Merit: 0

Looks like my problems mining ETC have gone away. It must of been a pool problem and the miner is running smoothly now.

UnknownTraders

newbie

Activity: 56

Merit: 0

GPU hangs are usually due to running them faster than what the manufacturer has approved, principally on the memory or too much undervolt for that card. What may help is draining all the power from the condenser which also helps reset the GPU's and extenders after a crash. Switch off the gear, cut off the power to the power supply unit via the switch on the back and press the power button to drain all the power. Then wait about two minutes before turning it back on.

gooppoop

newbie

Activity: 11

Merit: 0

Quote from: androstan1234 on June 26, 2018, 02:08:07 PM

It looks like the miner hangs when switching to devfee mining:

Quote

ETH - Total Speed: 402.153 Mh/s, Total Shares: 332, Rejected: 0, Time: 01:06
ETH: GPU0 29.765 Mh/s, GPU1 30.986 Mh/s, GPU2 30.675 Mh/s, GPU3 30.431 Mh/s, GPU4 29.839 Mh/s, GPU5 29.084 Mh/s, GPU6 30.319 Mh/s, GPU7 29.837 Mh/s, GPU8 30.286 Mh/s, GPU9 30.216 Mh/s, GPU10 50.664 Mh/s, GPU11 50.050 Mh/s
GPU0 t=75C fan=100%, GPU1 t=73C fan=100%, GPU2 t=72C fan=100%, GPU3 t=67C fan=100%, GPU4 t=65C fan=59%, GPU5 t=68C fan=61%, GPU6 t=72C fan=100%, GPU7 t=75C fan=100%, GPU8 t=67C fan=44%, GPU9 t=66C fan=31%; GPU10 t=64C fan=40%, GPU11 t=67C fan=45%
ETH: 06/26/18-11:37:34 - SHARE FOUND - (GPU 11) (DIFF: 9.114G)
ETH: Share accepted (109 ms)!
GPU #0: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 1:0:0)
GPU #1: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 2:0:0)
GPU #2: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 3:0:0)
GPU #3: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 4:0:0)
GPU #4: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 5:0:0)
GPU #5: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 7:0:0)
GPU #6: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 8:0:0)
GPU #7: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 9:0:0)
GPU #8: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 10:0:0)
GPU #9: Ellesmere (Radeon RX 580 Series), 8192 MB available, 36 compute units (pci bus 11:0:0)
GPU #10: GeForce GTX 1080 Ti, 11264 MB available, 28 compute units, capability: 6.1 (pci bus 12:0:0)
GPU #11: GeForce GTX 1080 Ti, 11264 MB available, 28 compute units, capability: 6.1 (pci bus 13:0:0)
ETH - Total Speed: 402.169 Mh/s, Total Shares: 333(33+22+30+21+28+23+23+25+21+21+37+49), Rejected: 0(0+0+0+0+0+0+0+0+0+0+0+0), Time: 01:06
ETH: GPU0 29.756 Mh/s, GPU1 30.996 Mh/s, GPU2 30.673 Mh/s, GPU3 30.417 Mh/s, GPU4 29.860 Mh/s, GPU5 29.126 Mh/s, GPU6 30.232 Mh/s, GPU7 30.252 Mh/s, GPU8 30.238 Mh/s, GPU9 30.201 Mh/s, GPU10 50.376 Mh/s, GPU11 50.043 Mh/s
Incorrect ETH shares: none
1 minute average ETH total speed: 402.443 Mh/s
Pool switches: ETH - 0
Current ETH share target: 0x00000000ffb34c02 (diff: 4300MH), epoch 195(2.52GB)
Max ETH share diff found: 97.799T
Current -dcri values: -dcri 8,10,8,18,20,10,8,10,8,12,30,30
GPU0 t=75C fan=100%, GPU1 t=73C fan=100%, GPU2 t=73C fan=100%, GPU3 t=67C fan=100%, GPU4 t=65C fan=59%, GPU5 t=68C fan=61%, GPU6 t=72C fan=100%, GPU7 t=74C fan=100%, GPU8 t=67C fan=44%, GPU9 t=66C fan=31%; GPU10 t=64C fan=40%, GPU11 t=67C fan=45%
ETH: 06/26/18-11:37:55 - SHARE FOUND - (GPU 5) (DIFF: 14.889G)
DevFee: ETH: Stratum - connecting to 'eth-eu.dwarfpool.com' <91.134.50.158> port 8008 (unsecure)
Minimal speed ("-minspeed" option) was set to 370 MH/s. Miner cannot reach this speed for 5 minutes, need to restart miner!
ETH: Connection lost, retry in 5 sec...
GPU #0: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 1:0:0)
GPU #1: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 2:0:0)
GPU #2: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 3:0:0)
GPU #3: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 4:0:0)
GPU #4: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 5:0:0)
GPU #5: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 7:0:0)
GPU #6: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 8:0:0)
GPU #7: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 9:0:0)
GPU #8: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 10:0:0)
GPU #9: Ellesmere (Radeon RX 580 Series), 8192 MB available, 36 compute units (pci bus 11:0:0)
GPU #10: GeForce GTX 1080 Ti, 11264 MB available, 28 compute units, capability: 6.1 (pci bus 12:0:0)
GPU #11: GeForce GTX 1080 Ti, 11264 MB available, 28 compute units, capability: 6.1 (pci bus 13:0:0)
ETH - Total Speed: 220.363 Mh/s, Total Shares: 334(33+22+30+21+29+25+23+25+22+23+38+50), Rejected: 0(0+0+0+0+0+0+0+0+0+0+0+0), Time: 01:25
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 29.869 Mh/s, GPU5 29.087 Mh/s, GPU6 0.000 Mh/s, GPU7 0.000 Mh/s, GPU8 30.337 Mh/s, GPU9 30.200 Mh/s, GPU10 50.549 Mh/s, GPU11 50.321 Mh/s
Incorrect ETH shares: none
1 minute average ETH total speed: 220.493 Mh/s
Pool switches: ETH - 0
Max ETH share diff found: 97.799T
Current -dcri values: -dcri 8,10,8,18,20,10,8,10,8,12,30,30
DevFee: ETH: Stratum - Connected (eth-eu.dwarfpool.com:8008) (unsecure)

Any idea how to prevent this?

Remove "-minspeed" option

androstan1234

jr. member

Activity: 251

Merit: 6

It looks like the miner hangs when switching to devfee mining:

Quote

ETH - Total Speed: 402.153 Mh/s, Total Shares: 332, Rejected: 0, Time: 01:06
ETH: GPU0 29.765 Mh/s, GPU1 30.986 Mh/s, GPU2 30.675 Mh/s, GPU3 30.431 Mh/s, GPU4 29.839 Mh/s, GPU5 29.084 Mh/s, GPU6 30.319 Mh/s, GPU7 29.837 Mh/s, GPU8 30.286 Mh/s, GPU9 30.216 Mh/s, GPU10 50.664 Mh/s, GPU11 50.050 Mh/s
GPU0 t=75C fan=100%, GPU1 t=73C fan=100%, GPU2 t=72C fan=100%, GPU3 t=67C fan=100%, GPU4 t=65C fan=59%, GPU5 t=68C fan=61%, GPU6 t=72C fan=100%, GPU7 t=75C fan=100%, GPU8 t=67C fan=44%, GPU9 t=66C fan=31%; GPU10 t=64C fan=40%, GPU11 t=67C fan=45%
ETH: 06/26/18-11:37:34 - SHARE FOUND - (GPU 11) (DIFF: 9.114G)
ETH: Share accepted (109 ms)!
GPU #0: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 1:0:0)
GPU #1: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 2:0:0)
GPU #2: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 3:0:0)
GPU #3: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 4:0:0)
GPU #4: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 5:0:0)
GPU #5: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 7:0:0)
GPU #6: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 8:0:0)
GPU #7: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 9:0:0)
GPU #8: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 10:0:0)
GPU #9: Ellesmere (Radeon RX 580 Series), 8192 MB available, 36 compute units (pci bus 11:0:0)
GPU #10: GeForce GTX 1080 Ti, 11264 MB available, 28 compute units, capability: 6.1 (pci bus 12:0:0)
GPU #11: GeForce GTX 1080 Ti, 11264 MB available, 28 compute units, capability: 6.1 (pci bus 13:0:0)
ETH - Total Speed: 402.169 Mh/s, Total Shares: 333(33+22+30+21+28+23+23+25+21+21+37+49), Rejected: 0(0+0+0+0+0+0+0+0+0+0+0+0), Time: 01:06
ETH: GPU0 29.756 Mh/s, GPU1 30.996 Mh/s, GPU2 30.673 Mh/s, GPU3 30.417 Mh/s, GPU4 29.860 Mh/s, GPU5 29.126 Mh/s, GPU6 30.232 Mh/s, GPU7 30.252 Mh/s, GPU8 30.238 Mh/s, GPU9 30.201 Mh/s, GPU10 50.376 Mh/s, GPU11 50.043 Mh/s
Incorrect ETH shares: none
1 minute average ETH total speed: 402.443 Mh/s
Pool switches: ETH - 0
Current ETH share target: 0x00000000ffb34c02 (diff: 4300MH), epoch 195(2.52GB)
Max ETH share diff found: 97.799T
Current -dcri values: -dcri 8,10,8,18,20,10,8,10,8,12,30,30
GPU0 t=75C fan=100%, GPU1 t=73C fan=100%, GPU2 t=73C fan=100%, GPU3 t=67C fan=100%, GPU4 t=65C fan=59%, GPU5 t=68C fan=61%, GPU6 t=72C fan=100%, GPU7 t=74C fan=100%, GPU8 t=67C fan=44%, GPU9 t=66C fan=31%; GPU10 t=64C fan=40%, GPU11 t=67C fan=45%
ETH: 06/26/18-11:37:55 - SHARE FOUND - (GPU 5) (DIFF: 14.889G)
DevFee: ETH: Stratum - connecting to 'eth-eu.dwarfpool.com' <91.134.50.158> port 8008 (unsecure)
Minimal speed ("-minspeed" option) was set to 370 MH/s. Miner cannot reach this speed for 5 minutes, need to restart miner!
ETH: Connection lost, retry in 5 sec...
GPU #0: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 1:0:0)
GPU #1: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 2:0:0)
GPU #2: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 3:0:0)
GPU #3: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 4:0:0)
GPU #4: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 5:0:0)
GPU #5: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 7:0:0)
GPU #6: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 8:0:0)
GPU #7: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 9:0:0)
GPU #8: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 10:0:0)
GPU #9: Ellesmere (Radeon RX 580 Series), 8192 MB available, 36 compute units (pci bus 11:0:0)
GPU #10: GeForce GTX 1080 Ti, 11264 MB available, 28 compute units, capability: 6.1 (pci bus 12:0:0)
GPU #11: GeForce GTX 1080 Ti, 11264 MB available, 28 compute units, capability: 6.1 (pci bus 13:0:0)
ETH - Total Speed: 220.363 Mh/s, Total Shares: 334(33+22+30+21+29+25+23+25+22+23+38+50), Rejected: 0(0+0+0+0+0+0+0+0+0+0+0+0), Time: 01:25
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 29.869 Mh/s, GPU5 29.087 Mh/s, GPU6 0.000 Mh/s, GPU7 0.000 Mh/s, GPU8 30.337 Mh/s, GPU9 30.200 Mh/s, GPU10 50.549 Mh/s, GPU11 50.321 Mh/s
Incorrect ETH shares: none
1 minute average ETH total speed: 220.493 Mh/s
Pool switches: ETH - 0
Max ETH share diff found: 97.799T
Current -dcri values: -dcri 8,10,8,18,20,10,8,10,8,12,30,30
DevFee: ETH: Stratum - Connected (eth-eu.dwarfpool.com:8008) (unsecure)

Any idea how to prevent this?

nikdd

newbie

Activity: 1

Merit: 0

Why I cannot use Nvidia GTX 970 cards at full speed (18-22mh) instead of 3-6mh? I was tried so many solutions. I tested on Win7 and Simplemining ubuntu editions. In rare cases on win7 sometimes cards start mining at 17-18mh but in short time speed degrades to 3-4mh. Thank You in advance.

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 216. (Read 6590718 times)