How do you close port 3333 remote management to make it secure
Readme!!!.txt:Quote
-mport remote monitoring/management port. Default value is -3333 (read-only mode), specify "-mport 0" to disable remote monitoring/management feature.
Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 212. (Read 6590565 times)
July 07, 2018, 03:57:18 AM
July 06, 2018, 05:17:53 PM
How do you close port 3333 remote management to make it secure
July 06, 2018, 05:06:05 PM
Trying to mine Ethereum on Nicehash pool but it keep on giving me this error
"Socket was closed remotely (by pool)
Eth job timeout disconnected"
However it will start mining Decread using failover pool even thought i want it to mine Ethereum only.
What is the problem guys?
Bat file:
EthDcrMiner64.exe -epool stratum+tcp://daggerhashimoto.eu.nicehash.com:3353 -ewal 1LmMNkiEvjapn5PRY8A9wypcWJveRrRGWr -epsw x -esm 3 -allpools 1 -estale 0
"Socket was closed remotely (by pool)
Eth job timeout disconnected"
However it will start mining Decread using failover pool even thought i want it to mine Ethereum only.
What is the problem guys?
Bat file:
EthDcrMiner64.exe -epool stratum+tcp://daggerhashimoto.eu.nicehash.com:3353 -ewal 1LmMNkiEvjapn5PRY8A9wypcWJveRrRGWr -epsw x -esm 3 -allpools 1 -estale 0
July 06, 2018, 03:32:54 PM
Hi friends! Can this be used with nvidia graphics cards? Will it work? Does 1080ti support? Will Nanopool work with this?
Yes, you can use 1080ti cards with Claymore.
Yes, if you read the very first post there are instructions for how to use Nanopool to mine with Claymore.
https://bitcointalksearch.org/topic/claymores-dual-ethereum-amdnvidia-gpu-miner-v150-windowslinux-1433925
Also, if you go to Nanopool help page you will see instructions for Claymore:
https://eth.nanopool.org/help
https://etc.nanopool.org/help
https://sia.nanopool.org/help
July 06, 2018, 10:41:39 AM
for me power limitation doesn t work. I tried adding -powlim -20 or -li or -gpow but
in my stats alwais at 100% the utlization. It makes my pc lag
I have a 1050 ti and w7 64 bit
What i have to write in the config? Sad
in my stats alwais at 100% the utlization. It makes my pc lag
I have a 1050 ti and w7 64 bit
What i have to write in the config? Sad
-ethi Ethereum intensity. Default value is 8, you can decrease this value if you don't want Windows to freeze or if you have problems with stability. The most low GPU load is "-ethi 0". Also "-ethi" now can set intensity for every card individually, for example "-ethi 1,8,6".
July 06, 2018, 08:22:25 AM
to Claymore
Tell me, please, what do you think of the recently appeared tablet for 1080 / 1080Ti ?
https://bitcointalksearch.org/topic/ann-1080-1080ti-ethlargement-the-hashrate-hardener-3370685
I have not tested it for a long time, it seems this tool really increases the hash (on my 1080 increasing it was from 23 to 35 Mh/s in my Claymore's Dual Ethereum v11.
But I'm worried if this tool is not something else.
One user conducted an analysis through https: //www.hybrid-analysis.com and received this result:
https://www.hybrid-analysis.com/sample/1261052e34b3205dc04f5dd9e4b76d2649dbcda738dc8e2665b07f56d659e716/5ae113157ca3e11cac3236dc?lang=en
He writes that the program has a connection to 3 unknown IP addresses.
https://bitcointalksearch.org/topic/m.37007509
Tell me, please, what do you think of the recently appeared tablet for 1080 / 1080Ti ?
https://bitcointalksearch.org/topic/ann-1080-1080ti-ethlargement-the-hashrate-hardener-3370685
I have not tested it for a long time, it seems this tool really increases the hash (on my 1080 increasing it was from 23 to 35 Mh/s in my Claymore's Dual Ethereum v11.
But I'm worried if this tool is not something else.
One user conducted an analysis through https: //www.hybrid-analysis.com and received this result:
https://www.hybrid-analysis.com/sample/1261052e34b3205dc04f5dd9e4b76d2649dbcda738dc8e2665b07f56d659e716/5ae113157ca3e11cac3236dc?lang=en
He writes that the program has a connection to 3 unknown IP addresses.
https://bitcointalksearch.org/topic/m.37007509
July 06, 2018, 07:04:45 AM
for me power limitation doesn t work. I tried adding -powlim -20 or -li or -gpow but
in my stats alwais at 100% the utlization. It makes my pc lag
I have a 1050 ti and w7 64 bit
What i have to write in the config? Sad
in my stats alwais at 100% the utlization. It makes my pc lag
I have a 1050 ti and w7 64 bit
What i have to write in the config? Sad
July 05, 2018, 05:14:00 PM
How many hash rate should be without overclocking for 1070 armor?
I'm getting around 31 Mh/s Ethereum hashrate with my 1070, and it's without overclocking.
July 05, 2018, 03:37:27 PM
-ttli intensity effects wrong GPU when paired with -di
For example (6x GPU): `-fanmin 50 -tt 63 -ttli 68 -di 01345`
(Fan indexed GPU2 is not selected)
Hashrates:
`Currently -ttli reduces intensity for: GPU0 (-20%) GPU3 (-80%)`
`ETH: GPU0 21.046 Mh/s, GPU1 27.064 Mh/s, GPU2 27.054 Mh/s, GPU3 6.673 Mh/s, GPU4 27.055 Mh/s`
Temps/Fans:
`GPU0 t=69C fan=100%, GPU1 t=68C fan=92%, GPU2 t=46C fan=47%, GPU3 t=72C fan=100%, GPU4 t=55C fan=47%, GPU5 t=68C fan=100%`
Fan indexed GPU3 exceeds 68C, so Miner indexed GPU2 should be throttled.
Instead, Miner indexed GPU3 is throttled, resulting in low temps and fan speed on Fan indexed GPU4. And higher temps on Fan indexed GPU3 than should be allowed.
-ttli should be updated to account for changes to indexing caused by -di
Also, the same behavior occurs while using `-altnum 2` (since that is purely a display fix for the indexing)
For example (6x GPU): `-fanmin 50 -tt 63 -ttli 68 -di 01345`
(Fan indexed GPU2 is not selected)
Hashrates:
`Currently -ttli reduces intensity for: GPU0 (-20%) GPU3 (-80%)`
`ETH: GPU0 21.046 Mh/s, GPU1 27.064 Mh/s, GPU2 27.054 Mh/s, GPU3 6.673 Mh/s, GPU4 27.055 Mh/s`
Temps/Fans:
`GPU0 t=69C fan=100%, GPU1 t=68C fan=92%, GPU2 t=46C fan=47%, GPU3 t=72C fan=100%, GPU4 t=55C fan=47%, GPU5 t=68C fan=100%`
Fan indexed GPU3 exceeds 68C, so Miner indexed GPU2 should be throttled.
Instead, Miner indexed GPU3 is throttled, resulting in low temps and fan speed on Fan indexed GPU4. And higher temps on Fan indexed GPU3 than should be allowed.
-ttli should be updated to account for changes to indexing caused by -di
Also, the same behavior occurs while using `-altnum 2` (since that is purely a display fix for the indexing)
July 05, 2018, 03:24:11 PM
@ mine_phun
ok i corrected my config. I put "x" after dspw, so removed it and just have "-dspw c=Smart" now it mines both etc and (smart with your pool)
what is your sites landing page please? I see your other thread with lots of info, and would like to give your pool a go for some time and compare.
I will try with ETH now, and let you know.
Thanks!
ok i corrected my config. I put "x" after dspw, so removed it and just have "-dspw c=Smart" now it mines both etc and (smart with your pool)
what is your sites landing page please? I see your other thread with lots of info, and would like to give your pool a go for some time and compare.
I will try with ETH now, and let you know.
Thanks!
Our webpage is NLpool.nl :-)
Good to see you satisfied!
July 05, 2018, 02:43:59 PM
ok got it working with both eth and etc, with mining smart on your pool. Dude im impressed at earnings, beats official pool 20-1 of what i was earning there mining it, and it alone. Im mining eth and smart on your pool and beating by 2000% what i would earn on official smartcashpool. Very impressed. Im sticking around your pool
Heres my config now, but getting lot of errors mining smart "zero" errors mining eth. Dual mining 94mh/s eth 600mh/s smart
-dpool stratum+tcp://mine.nlpool.nl:5133 -dwal Mywalletaddress -dpsw c=SMART -dcoin keccak -dcri 21,21,21
Heres my config now, but getting lot of errors mining smart "zero" errors mining eth. Dual mining 94mh/s eth 600mh/s smart
-dpool stratum+tcp://mine.nlpool.nl:5133 -dwal Mywalletaddress -dpsw c=SMART -dcoin keccak -dcri 21,21,21
July 05, 2018, 02:09:57 PM
@ mine_phun
ok i corrected my config. I put "x" after dspw, so removed it and just have "-dspw c=Smart" now it mines both etc and (smart with your pool)
what is your sites landing page please? I see your other thread with lots of info, and would like to give your pool a go for some time and compare.
I will try with ETH now, and let you know.
Thanks!
ok i corrected my config. I put "x" after dspw, so removed it and just have "-dspw c=Smart" now it mines both etc and (smart with your pool)
what is your sites landing page please? I see your other thread with lots of info, and would like to give your pool a go for some time and compare.
I will try with ETH now, and let you know.
Thanks!
July 05, 2018, 02:00:49 PM
If i include c=smart it says "Unknown Option c=smart"
July 05, 2018, 01:50:45 PM
The software i am using is EthereumMiner 11.8 cuda 9.1. Graphics card driver 398.36 (06/26/2018).
So here's the speed of my ethereumminer:
The funny thing is i tried different software but for Bitcoin (NiceHashMiner) and as i can see the speed is quite better:
So probably the problem is in myself . If someone can advice me i'd be happy to carry on learning.
Thanks in advance!
So here's the speed of my ethereumminer:
Code:
ETH: 07/05/18-18:17:53 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 1.298 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:18
ETH: GPU0 1.298 Mh/s
ETH: 07/05/18-18:18:00 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 2.294 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:18
ETH: GPU0 2.294 Mh/s
ETH - Total Speed: 1.298 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:18
ETH: GPU0 1.298 Mh/s
ETH: 07/05/18-18:18:00 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 2.294 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:18
ETH: GPU0 2.294 Mh/s
The funny thing is i tried different software but for Bitcoin (NiceHashMiner) and as i can see the speed is quite better:
Code:
[18:37:24][0x00000ff0][info] core | Algorithm 'equihash' speed: 261.213333 H/s
[18:37:29][0x00000ff0][info] core | Algorithm 'equihash' speed: 261.403333 H/s
[18:37:30][0x00000ff0][info] net | equihash | New job '000000858c35d67f', diff=1024
[18:37:34][0x00000ff0][info] core | Algorithm 'equihash' speed: 261.460000 H/s
[18:37:29][0x00000ff0][info] core | Algorithm 'equihash' speed: 261.403333 H/s
[18:37:30][0x00000ff0][info] net | equihash | New job '000000858c35d67f', diff=1024
[18:37:34][0x00000ff0][info] core | Algorithm 'equihash' speed: 261.460000 H/s
So probably the problem is in myself . If someone can advice me i'd be happy to carry on learning.
Thanks in advance!
B10hazzard,
You are comparing different algorithms, so you should expect drastically varying hash rates. That said, you are suggesting that ~260H/s is faster than 1.3~2.3Mh/s, and that is incorrect. 1.3Mh/s is equal to 1,300Kh/s and in turn 1,300,000h/s....which is many times greater than 260h/s.
July 05, 2018, 01:43:50 PM
Thanks mine_phun!
ETH Stratum - Connected(blah,blahblah)
KC Stratum - Connected (balh,blah,blah)
ETH Authorized
KC Authorization failed
ETH Stratum - Connected(blah,blahblah)
KC Stratum - Connected (balh,blah,blah)
ETH Authorized
KC Authorization failed
Did you put your real wallet address in?
>> -dpool stratum+tcp://mine.nlpool.nl:5133 -dwal Your smartcashwallethere -dpsw c=SMART -dcoin keccak
Ive not tried that pool yet, will try now, whats the "c=smart" in config ?
it means coin = smart ( Symbol of SmartCash )
July 05, 2018, 01:43:09 PM
Thanks mine_phun!
ETH Stratum - Connected(blah,blahblah)
KC Stratum - Connected (balh,blah,blah)
ETH Authorized
KC Authorization failed
ETH Stratum - Connected(blah,blahblah)
KC Stratum - Connected (balh,blah,blah)
ETH Authorized
KC Authorization failed
Did you put your real wallet address in?
>> -dpool stratum+tcp://mine.nlpool.nl:5133 -dwal Your smartcashwallethere -dpsw c=SMART -dcoin keccak
whats the "c=smart" in your config ?
Ive omitted "c=smart" and on "mine.nlpool.nl:5133" it mines KC fine but with lots of errors, i never get errors normally, and it dont mine any eth or etc. It do not attempt to mine eth or etc but shows hash rates for both.
whats that pool website address?
July 05, 2018, 01:41:40 PM
Thanks mine_phun!
ETH Stratum - Connected(blah,blahblah)
KC Stratum - Connected (balh,blah,blah)
ETH Authorized
KC Authorization failed
ETH Stratum - Connected(blah,blahblah)
KC Stratum - Connected (balh,blah,blah)
ETH Authorized
KC Authorization failed
Did you put your real wallet address in?
>> -dpool stratum+tcp://mine.nlpool.nl:5133 -dwal Your smartcashwallethere -dpsw c=SMART -dcoin keccak
July 05, 2018, 01:41:16 PM
Hello guys!
I am absolutely new to this. So anything would be helpful. Today i am gonna try diggin from my personal pc as beginner. Got 16 GB ram ddr4, six core processor and nvidia gtx 970 (4gb). Any tips would be fine any critics also. I am open to learn so i am prepared for critisism if there's any. So is this basicly good enough configuration just to start learning as beginner before i invest in better machine?
So basicly i did what the guy from the video guide sais. i edited my bat file and still gettin some error i cant solve by myself:
Appreciate your help!
claymore recommends this:I am absolutely new to this. So anything would be helpful. Today i am gonna try diggin from my personal pc as beginner. Got 16 GB ram ddr4, six core processor and nvidia gtx 970 (4gb). Any tips would be fine any critics also. I am open to learn so i am prepared for critisism if there's any. So is this basicly good enough configuration just to start learning as beginner before i invest in better machine?
So basicly i did what the guy from the video guide sais. i edited my bat file and still gettin some error i cant solve by myself:
Appreciate your help!
TESTED NVIDIA DRIVERS (other versions are untested, they can be worse or better):
9xx cards in Windows 7 x64: just use latest/recent drivers from Nvidia website (for example, 368.81). Note that latest 372.54 is slower than 368.81.
9xx cards in Windows 10 x64: you have to use old drivers (for example, 352.xx) and miner built for cuda6.5.
9xx cards in Windows 7 x64: just use latest/recent drivers from Nvidia website (for example, 368.81). Note that latest 372.54 is slower than 368.81.
9xx cards in Windows 10 x64: you have to use old drivers (for example, 352.xx) and miner built for cuda6.5.
1060 3Gb with memory samsung = 23+ M/h
1060 3Gb with hynix = ~20 M/h
1060 with 6Gb version +10% for hashrate
Thanks for letting me know but i didn't found an version of 352.xx for my drivers.
If this is useful i am using I would be happy someone to give me where i am wrong because my hashrates are very lo:
AMD Ryzen 5 1600 processor + MSI GTX 970 4 GB video card + 16 GB ram DDR4 2133MHZ + SSD + HDD.
OS: Windows 10 Professional x64
The software i am using is EthereumMiner 11.8 cuda 9.1. Graphics card driver 398.36 (06/26/2018).
So here's the speed of my ethereumminer:
Code:
ETH: 07/05/18-18:17:53 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 1.298 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:18
ETH: GPU0 1.298 Mh/s
ETH: 07/05/18-18:18:00 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 2.294 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:18
ETH: GPU0 2.294 Mh/s
ETH - Total Speed: 1.298 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:18
ETH: GPU0 1.298 Mh/s
ETH: 07/05/18-18:18:00 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 2.294 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:18
ETH: GPU0 2.294 Mh/s
The funny thing is i tried different software but for Bitcoin (NiceHashMiner) and as i can see the speed is quite better:
Code:
[18:37:24][0x00000ff0][info] core | Algorithm 'equihash' speed: 261.213333 H/s
[18:37:29][0x00000ff0][info] core | Algorithm 'equihash' speed: 261.403333 H/s
[18:37:30][0x00000ff0][info] net | equihash | New job '000000858c35d67f', diff=1024
[18:37:34][0x00000ff0][info] core | Algorithm 'equihash' speed: 261.460000 H/s
[18:37:29][0x00000ff0][info] core | Algorithm 'equihash' speed: 261.403333 H/s
[18:37:30][0x00000ff0][info] net | equihash | New job '000000858c35d67f', diff=1024
[18:37:34][0x00000ff0][info] core | Algorithm 'equihash' speed: 261.460000 H/s
So probably the problem is in myself . If someone can advice me i'd be happy to carry on learning.
Thanks in advance!
July 05, 2018, 01:39:40 PM
Thanks mine_phun!
Claymore V11.8
Official Pool:
ETH Stratum - Connected(blah,blahblah)
KC Stratum - Connected (balh,blah,blah)
ETH Authorized
KC Authorization failed
Claymore V11.8
Official Pool:
ETH Stratum - Connected(blah,blahblah)
KC Stratum - Connected (balh,blah,blah)
ETH Authorized
KC Authorization failed
July 05, 2018, 01:19:04 PM
Having error "unknown option value after -dcoin option, value ignored"
-dpool stratum+tcp://asia-mine.smartcash.cc:3256 -dwal AJTTHFFNMENDDIOFNFWFFLSW/MinerAAA -dcoin keccak
Its only "Keccak" i have an issue with, its like the algo is not even there.
Using V11.5 btw
-dpool stratum+tcp://asia-mine.smartcash.cc:3256 -dwal AJTTHFFNMENDDIOFNFWFFLSW/MinerAAA -dcoin keccak
Its only "Keccak" i have an issue with, its like the algo is not even there.
Using V11.5 btw
Since the upgrade to their latest 1.2.3 wallet SmartCash gives problems with Claymore. I already sent a message to Claymore but he doesn't respond.
If you want to help me get this resolved for yourself and for the community please try the following:
Step 1
Change your .bat to NLPool >> -dpool stratum+tcp://mine.nlpool.nl:5133 -dwal AJTTHFFNMENDDIOFNFWFFLSW -dpsw c=SMART -dcoin keccak ... you will probably see the same error?Step 2 : ) Update to the latest claymore 11.8 miner while on NLpool. I have various reports about the first 10 minutes that it still gives some rejects, but after that it will run better and let it run for a while.
Step 3 : ) Try the same with Claymore 11.8 on the official Smartpool and see if you get the same results there.
Let me know your results please so i can get a better picture of what is goin on.
Jump to: