Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 265. (Read 6590718 times)

good idea. but need more improvements. like how can i see the images of the rig after post the result? and the additional notes? and why 512KB rom is to big?

You should have login to users edit their results and etc.

But i think it will be done soon.

GJ anyways

Dear Claymore,

thanks for the updated version, but i have error for NVML cannot detect temperature as well as CUDA error.
Below the sample result logs:

=========================================================================
22:25:30:131   294c   gpu 8 nvidia powlim set ok (85%, previous value was 100%)
22:25:30:177   294c   gpu 8 nvidia setcoreclock set ok (1733MHz, previous value was 1683MHz)
22:25:30:271   294c   gpu 8 nvidia memclock set ok (6355MHz, previous value was 5505MHz)
22:25:30:302   294c   gpu 9 nvidia powlim set ok (85%, previous value was 100%)
22:25:30:349   294c   gpu 9 nvidia setcoreclock set ok (1632MHz, previous value was 1582MHz)
22:25:30:396   294c   gpu 9 nvidia memclock set ok (6355MHz, previous value was 5505MHz)
22:25:30:412   294c   gpu 10 nvidia powlim set ok (70%, previous value was 100%)
22:25:30:459   294c   gpu 10 nvidia setcoreclock set ok (1763MHz, previous value was 1733MHz)
22:25:30:506   294c   gpu 10 nvidia memclock set ok (5555MHz, previous value was 5005MHz)
22:25:47:018   294c   CUDA error 9 #102 - 46
22:25:47:097   294c   CUDA error 9 #102a - 46
22:25:47:097   294c   CUDA error 9 #103 - 46
22:25:47:097   294c   CUDA error 9 #105 - 46
22:25:47:097   294c   CUDA error 10 #102 - 46
22:25:47:112   294c   CUDA error 10 #102a - 46
22:25:47:128   294c   CUDA error 10 #103 - 46
22:25:47:128   294c   CUDA error 10 #105 - 46
22:25:47:300   2988   NVML: cannot get current temperature, error 999 (an internal driver error occurred)
22:25:47:315   2988   NVML: cannot get fan speed, error 999 (an internal driver error occurred)
22:25:47:519   2988   NVML: cannot get current temperature, error 999 (an internal driver error occurred)
22:25:47:519   2988   NVML: cannot get fan speed, error 999 (an internal driver error occurred)
22:25:47:644   2988   NVML: cannot get current temperature, error 999 (an internal driver error occurred)
22:25:47:644   2988   NVML: cannot get fan speed, error 999 (an internal driver error occurred)
22:25:47:753   2988   NVML: cannot get current temperature, error 999 (an internal driver error occurred)
22:25:47:753   2988   NVML: cannot get fan speed, error 999 (an internal driver error occurred)
22:25:47:878   2988   NVML: cannot get current temperature, error 999 (an internal driver error occurred)
22:25:47:878   2988   NVML: cannot get fan speed, error 999 (an internal driver error occurred)
22:25:47:987   2988   NVML: cannot get current temperature, error 999 (an internal driver error occurred)



best regards,

hi,
please submit your updated hashrates to
https://gpustats.com
thank you

I have been successfully using claymore on Windows 10 for 3 months. However, I wanted to switch to Linux for the sake stability. I tried both HiveOS and SimpleOS. However, apparently claymore connects to ethermine and then the shares get rejected and it disconnects and tries again. It was exactly the same result in both HiveOS and SimpleOS. I also tried to start the miner manually myself, in order to rule out the possibility that it might be due to some bad config, however, it was still the same result.

Here is the screenshot:
https://ibb.co/ncW5wx

I would really appreciate any input on this.

Thanks for the updated version @Claymore!

Quick question...on Linux [HiveOS] when I run two claymore dual instances [v11.6] eth only mode (split up a 10 card rig // -di 01234 in one mining eth and -di 56789 in the other mining etc) claymore reports the temps and fan settings for all 10 cards in both instances and I get OpenCL hangs. If I run one instance of claymore with all 10 cards its stable -- no OpenCL hangs.

I assume I get the OpenCL hangs when running two instances due to both instances trying to query temps & fan speeds at the same time. Is there a setting I am missing that only queries/controls the cards enabled in the instance 

My 1060 3gb could no longer mine since today because of the DAG, not unexpected, I knew it was coming.

My problem:
I'm now using integrated graphics for windows and my GPU is sitting quietly in the PCIe slot, no load, no VRAM usage, nothing.
Yet when I try and run the miner again i get the same problem of not enough VRAM. By using integrated graphics for windows I freed up 300-400mb of VRAM for my GPU, is that still not enough??

v11.7:

- added temperature management and overclock support for recent Nvidia cards in Windows: "-tt", "-powlim", "-cclock", "-mclock", "-tt", "-fanmax", "-fanmin" options are supported for Nvidia too.
- now "y" key also disables CrossFire.
- added "-y" option.
- fixed issue with miner restart that was required sometimes to apply overclock settings for AMD cards.
- fixed issue with rejected shares when "-esm 3" option is used.
- Linux version: fixed issue with remote management.
- some changes in watchdog routines to improve ability to restart miner after various OpenCL fails.
- a few minor bug fixes and improvements.

PS. For Nvidia "-cclock" and "-mclock" options also support delta mode, for example, "-mclock +400", see readme for details.

add -di 1 to your bat file (same line as the rest)

Switch to windows 7 or linux, you'll be good for another while.

same here .. it was inevitable .. 3gb zotacs were near end of dag file size

Hello, is it possible to add Cryptonight light V7,

my favourite software is Claymore, and if you can help us out and add this cryptinight light V7 support, as many coin now use this algo to fight ASIC.

But today it stop mine on GTX 1060 3gb((

Ceгoдня c yтpa yжe нe дoбывaeт эфиp видeoкapтa gtx 1060 c 3gb нa win10

http://priscree.ru/img/266398352ae8ab.jpg

3GB Zotacs DAG file too big again .. thanks for the extra month xx

Great Mining Program.  One of my favorites.   

It seems that after running troublefree for 3 weeks there were 3 machines that all died within 2 hours with 3 different problems.

is the GPU connected to a monitor? try to plug them or remove then observe

how many GPU's of 1070 getting 2mhs?

Are you using risers? try to plug them in PCIe x16 slot

these are only basics that you could try

One one of my new rigs i am using claymore's miner with my GTX 1070 but am only getting 2 MHs. Any ideas?
I've already tried overclocking but its still the same. It's strange because i can mining ZEC at the expected hashrate of. 400+ h/s. Just when mining ETH with claymore that hashrate is so low.

That's a last effort I think, this was working, and now 2 more miners have since gone down. What's going on with 11.6, some kind of time bomb?

CJ

Start with basic troubleshoot, use 1 card only, install it on PCIe x16, Uninstall/Reinstall driver, then run miner

if successful then add other GPU's

Thanks but that's not it. I added another exclusion anyway. 

Can you think of anything else to check?  Already reinstalled the Claymore software.

CJ