Author

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 293. (Read 6590718 times)

newbie
Activity: 1
Merit: 0
What is the easiest method to push an update to the Claymore mining software for 50+ Linux rigs?

I still haven't found out a method that doesn't give me arthritis lol.
full member
Activity: 154
Merit: 100
finally, I am able to get 30 MH/s on all my MSI Armor RX 580 8GB on standard Driver  Wink Cool
jr. member
Activity: 63
Merit: 1

- I mine ETH fork on my 2GB cards. For devfee miner tries to mine ETH and it fails because ETH cannot be mined on 2GB cards.
- Use "-allcoins exp -allpools 1" options.


Will it work for 3GB cards?

It should.

The 3G cards are usually slow.
legendary
Activity: 1246
Merit: 1024

- I mine ETH fork on my 2GB cards. For devfee miner tries to mine ETH and it fails because ETH cannot be mined on 2GB cards.
- Use "-allcoins exp -allpools 1" options.


Will it work for 3GB cards?

It should.
newbie
Activity: 22
Merit: 0

- I mine ETH fork on my 2GB cards. For devfee miner tries to mine ETH and it fails because ETH cannot be mined on 2GB cards.
- Use "-allcoins exp -allpools 1" options.


Will it work for 3GB cards?
newbie
Activity: 11
Merit: 0
Hello Guys,

I have several rigs and I'm getting similar errors on most of the. Sometimes they restart, sometimes they simply hang and need to restart them manually.

Any tips?


Code:
13:33:03:419 1984 watchdog - thread 15 (gpu7), hb time 500
13:33:06:419 1e90 buf: {"id":0,"jsonrpc":"2.0","result":["0x07bbac4cfde74aee05eeabf4c393517fc8c272ec99c9cb25f044c88aeb8a62a9","0x3c08da512cf85dc7dd15483f1ebf529b55eb2c4ebc2182a808eebe109eab0e5c","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x5140b5"]}

13:33:06:419 1e90 ETH: 03/26/18-13:33:06 - New job from eu1.ethermine.org:4444
13:33:06:419 1e90 target: 0x0000000112e0be82 (diff: 4000MH), epoch 177(2.38GB)
13:33:06:419 1e90 ETH - Total Speed: 254.834 Mh/s, Total Shares: 546, Rejected: 0, Time: 02:22
13:33:06:419 1e90 ETH: GPU0 31.831 Mh/s, GPU1 31.888 Mh/s, GPU2 31.904 Mh/s, GPU3 31.585 Mh/s, GPU4 31.909 Mh/s, GPU5 31.903 Mh/s, GPU6 31.911 Mh/s, GPU7 31.904 Mh/s
13:33:08:982 1e90 ETH: checking pool connection...
13:33:08:982 1e90 sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

13:33:09:013 1e90 buf: {"id":3,"jsonrpc":"2.0","result":["0x07bbac4cfde74aee05eeabf4c393517fc8c272ec99c9cb25f044c88aeb8a62a9","0x3c08da512cf85dc7dd15483f1ebf529b55eb2c4ebc2182a808eebe109eab0e5c","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x5140b5"]}

13:33:18:999 1e90 ETH: checking pool connection...
13:33:18:999 1e90 sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

13:33:19:030 1e90 buf: {"id":3,"jsonrpc":"2.0","result":["0x07bbac4cfde74aee05eeabf4c393517fc8c272ec99c9cb25f044c88aeb8a62a9","0x3c08da512cf85dc7dd15483f1ebf529b55eb2c4ebc2182a808eebe109eab0e5c","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x5140b5"]}

13:33:20:608 196c GPU0 t=48C fan=80%, GPU1 t=46C fan=80%, GPU2 t=49C fan=80%, GPU3 t=44C fan=82%, GPU4 t=50C fan=79%, GPU5 t=49C fan=80%, GPU6 t=50C fan=79%, GPU7 t=47C fan=79%
13:33:20:937 176c checked ETH share on CPU, spent 9ms
13:33:20:937 176c sent: {"id":10,"method":"eth_submitWork","params":["0x0f4c22081b1b7612","0x07bbac4cfde74aee05eeabf4c393517fc8c272ec99c9cb25f044c88aeb8a62a9","0x3ff1330d0d7dfbd8a7106f2d6656164f25e0ba7339b9ebe808229b08f2957cbe"]}

13:33:20:937 176c ETH: put share nonce f4c22081b1b7612
13:33:20:952 1e90 ETH: 03/26/18-13:33:20 - SHARE FOUND - (GPU 0)
13:33:20:983 1e90 buf: {"id":10,"jsonrpc":"2.0","result":true}

13:33:20:983 1e90 ETH: Share accepted (47 ms)!

13:33:22:343 1e90 sent: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0xf306cad", "0x00000000000000000000000000000000000000000000000000000000a30ad63b"]}

13:33:22:374 1e90 buf: {"id":6,"jsonrpc":"2.0","result":true}

13:33:29:016 1e90 ETH: checking pool connection...
13:33:29:016 1e90 sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

13:33:29:047 1e90 buf: {"id":3,"jsonrpc":"2.0","result":["0x07bbac4cfde74aee05eeabf4c393517fc8c272ec99c9cb25f044c88aeb8a62a9","0x3c08da512cf85dc7dd15483f1ebf529b55eb2c4ebc2182a808eebe109eab0e5c","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x5140b5"]}

13:33:36:235 1984 em hbt: 15, fm hbt: 109,
13:33:36:235 1984 watchdog - thread 0 (gpu0), hb time 562
13:33:36:235 1984 watchdog - thread 1 (gpu0), hb time 265
13:33:36:235 1984 watchdog - thread 2 (gpu1), hb time 94
13:33:36:235 1984 watchdog - thread 3 (gpu1), hb time 390
13:33:36:235 1984 watchdog - thread 4 (gpu2), hb time 94
13:33:36:235 1984 watchdog - thread 5 (gpu2), hb time 390
13:33:36:235 1984 watchdog - thread 6 (gpu3), hb time 109
13:33:36:235 1984 watchdog - thread 7 (gpu3), hb time 406
13:33:36:235 1984 watchdog - thread 8 (gpu4), hb time 390
13:33:36:235 1984 watchdog - thread 9 (gpu4), hb time 94
13:33:36:235 1984 watchdog - thread 10 (gpu5), hb time 94
13:33:36:235 1984 watchdog - thread 11 (gpu5), hb time 390
13:33:36:235 1984 watchdog - thread 12 (gpu6), hb time 390
13:33:36:235 1984 watchdog - thread 13 (gpu6), hb time 94
13:33:36:235 1984 watchdog - thread 14 (gpu7), hb time 94
13:33:36:235 1984 watchdog - thread 15 (gpu7), hb time 390
13:33:39:032 1e90 ETH: checking pool connection...
13:33:39:032 1e90 sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

13:33:39:064 1e90 buf: {"id":3,"jsonrpc":"2.0","result":["0x07bbac4cfde74aee05eeabf4c393517fc8c272ec99c9cb25f044c88aeb8a62a9","0x3c08da512cf85dc7dd15483f1ebf529b55eb2c4ebc2182a808eebe109eab0e5c","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x5140b5"]}

13:33:42:361 1e90 sent: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0xf300a98", "0x00000000000000000000000000000000000000000000000000000000a30ad63b"]}

13:33:42:392 1e90 buf: {"id":6,"jsonrpc":"2.0","result":true}

newbie
Activity: 165
Merit: 0
Can you make shorter name for Claymore folder and zip? I can't extract them on Win10.
legendary
Activity: 1246
Merit: 1024
Claymore is crashing at startup ('EthDcrMiner64.exe has stopped working) unless I have a working monitor attached to the motherboard HDMI port.
I have set up several rigs with the Radeon Blockchain driver and always just used the onboard GPU during setup. I decided to try Adrenaline and OverdriveNTool for a new build but can't figure out how to get around this problem. If the rig reboots and the monitor is asleep, this problem will occur and there is no way to fix it remotely. I have tied all BIOS settings for the onboard GPU.

You sure onboard GPU is turned off in the BIOS. If not, just put an HDMI dummy dongle on it. The computer will think there is a monitor on the port.
jr. member
Activity: 82
Merit: 3
Claymore is crashing at startup ('EthDcrMiner64.exe has stopped working) unless I have a working monitor attached to the motherboard HDMI port.
I have set up several rigs with the Radeon Blockchain driver and always just used the onboard GPU during setup. I decided to try Adrenaline and OverdriveNTool for a new build but can't figure out how to get around this problem. If the rig reboots and the monitor is asleep, this problem will occur and there is no way to fix it remotely. I have tied all BIOS settings for the onboard GPU.
member
Activity: 146
Merit: 10
whats next on 11.6? anyone knows?
legendary
Activity: 1281
Merit: 1003
ok, i sold a gpu on ebay, with no returns but they returned it anyway. when i sent the gpu out i could get 30mh tweaked. when i got the card back the most i can get weith the rx 580 is 15mh has somthing changed in the etheruem or software or is my card now slightly burnt out?

Guessing you have tried to flash the BIOS with the one you use to get 30MHs?
Did you make a note of the serial number of the one you sold?... maybe the buyer returned the same model but different/faulty card.

or he change the bios, or you did not use the blockchain driver ?
newbie
Activity: 23
Merit: 0
ok, i sold a gpu on ebay, with no returns but they returned it anyway. when i sent the gpu out i could get 30mh tweaked. when i got the card back the most i can get weith the rx 580 is 15mh has somthing changed in the etheruem or software or is my card now slightly burnt out?

Guessing you have tried to flash the BIOS with the one you use to get 30MHs?
Did you make a note of the serial number of the one you sold?... maybe the buyer returned the same model but different/faulty card.
newbie
Activity: 91
Merit: 0
ok, i sold a gpu on ebay, with no returns but they returned it anyway. when i sent the gpu out i could get 30mh tweaked. when i got the card back the most i can get weith the rx 580 is 15mh has somthing changed in the etheruem or software or is my card now slightly burnt out?

Likely your card. Mine still 30mhs
newbie
Activity: 6
Merit: 0
Hello.
Question reguarding monitor.

NameIP:PortRunning TimeEthereum StatsDecered StatsGPU TemperaturePoolVersionComments
500289:57 (0)142.339 MH/s, 11337/1/1 (0.01%)0.000 MH/s, 0/0 (0.00%eu1.ethermine.org:14444 (0); (0)11.5 - ETH
500302:22 (14)184.490 MH/s, 379/0/0 (0.00%)0.000 MH/s, 0/0 (0.00%)(49C:0% )(48C:0% )(53C:96% )(52C:0% )(49C:0% )(51C:0% )eu1.ethermine.org:14444 (0); (0)11.5 - ETH



Where one instance of miner outputs temps perfectly, other doesn't. The bat files are identical, just changed the rig name.

Thiese both rigs uses AMD cards. Using Blockhain driver and custom bios. (Bioses are identical as well) Last version I was using 10.0 didn't show temps on AMD at all on monitor, was working perfectly on our nvidia rigs.

Code:
EthDcrMiner64.exe -epool eu1.ethermine.org:14444 -ewal wallet.RIG03 -epsw x
is the bat file.
Can anyone help understand why monitor can't show temps?

P.S. Due security conserns I removed IP addresses.
full member
Activity: 203
Merit: 100
ok, i sold a gpu on ebay, with no returns but they returned it anyway. when i sent the gpu out i could get 30mh tweaked. when i got the card back the most i can get weith the rx 580 is 15mh has somthing changed in the etheruem or software or is my card now slightly burnt out?

hero member
Activity: 840
Merit: 503
Just updated since 11.0 to 11.5. Rigs working more stable. thank you Claymore
jr. member
Activity: 170
Merit: 6
i try to use -cvddc option in start.bat file to allocate 825mV to my rx470
the core voltage in bios is dynamic
but it does not work and with the option in start.bat file still GPU-Z show 1000mV
on the wall same
i have to use a program such as sapphire trixx to undervolt each card for -175mV

no reason found yet!!!

Show your .bat file please.
Maybe it will tell someone the reason.

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eth-eu1.nanopool.org:9999 -ewal walletXXX.workerXXX/[email protected] -epsw x -mode 1 -ftime 10 -cvddc 825 -mvddc 900


Sorry, It looks correct to me.
Maybe someone else will see something I don't.
That's pretty much the way I use them, other than I also set both clock and voltages.
The other difference is I have mine in the config.txt file and not on the command line, although I don't
see how that should make a difference.




newbie
Activity: 197
Merit: 0
i try to use -cvddc option in start.bat file to allocate 825mV to my rx470
the core voltage in bios is dynamic
but it does not work and with the option in start.bat file still GPU-Z show 1000mV
on the wall same
i have to use a program such as sapphire trixx to undervolt each card for -175mV

no reason found yet!!!

Show your .bat file please.
Maybe it will tell someone the reason.

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eth-eu1.nanopool.org:9999 -ewal walletXXX.workerXXX/[email protected] -epsw x -mode 1 -ftime 10 -cvddc 825 -mvddc 900
jr. member
Activity: 170
Merit: 6
i try to use -cvddc option in start.bat file to allocate 825mV to my rx470
the core voltage in bios is dynamic
but it does not work and with the option in start.bat file still GPU-Z show 1000mV
on the wall same
i have to use a program such as sapphire trixx to undervolt each card for -175mV

no reason found yet!!!

Show your .bat file please.
Maybe it will tell someone the reason.
newbie
Activity: 197
Merit: 0
i try to use -cvddc option in start.bat file to allocate 825mV to my rx470
the core voltage in bios is dynamic
but it does not work and with the option in start.bat file still GPU-Z show 1000mV
on the wall same
i have to use a program such as sapphire trixx to undervolt each card for -175mV

no reason found yet!!!
Jump to: