Hello guys, i have lately one problem, but i dont i havent any rejects, and dont know if this is important. Here is mine log
15:09:50:546 12e8 GPU #1 got incorrect share. If you see this warning often, make sure you did not overclock it too much!
15:18:19:083 cb0 ETH - Total Speed: 118.625 Mh/s, Total Shares: 338(79+92+85+82), Rejected: 0(0+0+0+0), Time: 01:46
15:18:19:083 cb0 ETH: GPU0 29.483 Mh/s, GPU1 29.716 Mh/s, GPU2 29.712 Mh/s, GPU3 29.714 Mh/s
15:18:19:083 cb0 Incorrect ETH shares: GPU1 1
15:27:52:856 cb0 Current -dcri values: -dcri 6,8,8,8
15:27:52:856 cb0 GPU0 t=51C fan=72%, GPU1 t=51C fan=74%, GPU2 t=49C fan=74%, GPU3 t=47C fan=75%
clyamore 11.4 (but 11.2 do same)
From one week this happend ONLY on gpu1
Havent any reject, mine question is why ?
msi rx 570 gaming-x , modded bios, 1150/2040 core / memory clock
Any suggestions ?
Thanks in advice
try to lower your clock a bit, however if the incorrect shares is not that often appeared then I guess its tolerable.
You will need to connect to a secure server using SSL .....read page 1 command line options -epool
I tried to follow the "readme". It cannot connect through SSL.
I think nanopool has no SSL yet, try ethermine instead and change the port to 5555 to activate SSL