Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 339. (Read 6590718 times)

Was dual mining Keccak on 3x 8gb 580s at -dcri 6 and 3x at -dcri 8 without a problem.  Restarted rig, and the 3 at -dcri 6 can't mine stable on any intensity.  Ones at -dcri 8 kept going just fine.

The mysteries of hardware.

Yes you can

Coincidence after Claymore affirmed that Phoenix (being Phoenix faster) stole his kernels (he found out by disassembling the miner, and looking at code, which then can be used) ?

Don't get me wrong, both developers do an excellent job, and this "miners wars" only is good for us.

Across 1.5ghs on various rigs I gained ~15-20mhs total going from 11.1 to 11.3.

570 rigs gained 4-5mhs
580 rigs gained 1-2mhs

Not sure why that is...

RTFM

Auto DCRI is only for single mining.

I do not see high cpu usage but v11.2 seems to work very good only with small amount of GPUs and unpredictable on big (13) on linux.

Claymore, please add more statistic for invalid shares. (GPU#11 got invalid share....)
Like this:
Total Speed: 365.564 Mh/s, Total Shares: 2664, Rejected: 1, Invalid shares: 0, Time: 08:21
and per GPU like this:
Total Shares: 2636(205+214+238+217+216+220+225+217+239+229+204+212), Rejected: 1(0+0+0+0+0+0+0+1+0+0+0+0), Invalid shares: 1(0+0+0+0+0+0+0+0+0+0+0+1)
Thanks in advance!

Just run 11.3

I have 2 x RX580 with 8 Gb (bios mods) and 3 x  RX470 with 8Gb (no BIOS mods) in my rig.

For testing I've choose auto detect -dcri value and miner detect value of 30 for all 5 cards. For RX580 -dcri 30 is the wright choice for best ETH+DCR mining output. But for rx470's -dcri 30 is not the best one, the best one is 24.

I believe the miner is not able to chose best -dcri value for different type of cards in one rig?

However it is a useful option to help find best setup.

Thank you Claymore.

Thanks, let me try this out.

I did memory bios flash to the max, if turn off doesn't work I will 're flash to lower MHz.

GPU hangs are most often from to a high overclock, especially on the memory or too much undervolt for that card. Sometimes draining all the power from the capacitors also helps reset the GPU's and risers after a crash. Shutdown down the rig, cutoff the power to the PSU with the switch on the back and press the power button to drain all the power. Then after 1-2 minutes turn the rig back on.

Hi,
I am new to the mining and downloaded latest version today. I am having some problem with GPU1 as it shows 32 mhs at start but then goes to 0 mhs.

Afterwards it re-starts and do the same, if anyone know the solution then please let me know.

Not sure how to attach files so please have a look at the cut /paste below from log file.

Thanks to Claymore for putting it together and others for helping out.


13:14:20:989   a74   ETH: 03/10/18-13:14:20 - New job from eu1.ethermine.org:4444
13:14:21:005   a74   target: 0x0000000112e0be82 (diff: 4000MH), epoch 174(2.36GB)
13:14:21:005   a74   ETH - Total Speed: 45.994 Mh/s, Total Shares: 1, Rejected: 0, Time: 00:00
13:14:21:020   a74   ETH: GPU0 13.936 Mh/s, GPU1 32.057 Mh/s
13:14:24:052   a74   buf: {"id":0,"jsonrpc":"2.0","result":["0x4fa286e89ea9cb5a918c69bcb81627931044886e5e755d66da83ae571becb38d","0x32a2478e57a4b36e5f5e5420e5443a5a82dac6ff01a0548737fada91d743d7d0","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x4fcf4f"]}

13:14:30:912   a74   buf: {"id":3,"jsonrpc":"2.0","result":["0xd8fb349a22f7d97de8577d48867720fbe1b85fd8c2cde9ff0b6b4e11415f2f1a","0x32a2478e57a4b36e5f5e5420e5443a5a82dac6ff01a0548737fada91d743d7d0","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x4fcf50"]}

13:14:30:959   a74   buf: {"id":6,"jsonrpc":"2.0","result":true}

13:14:31:881   a74   buf: {"id":0,"jsonrpc":"2.0","result":["0x5bc8361f3be366fecc2d3d87c9473dab362dd8cdbfd6b9789816ffcfeb5d7255","0x32a2478e57a4b36e5f5e5420e5443a5a82dac6ff01a0548737fada91d743d7d0","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x4fcf51"]}

13:14:31:881   a74   ETH: 03/10/18-13:14:31 - New job from eu1.ethermine.org:4444
13:14:31:897   a74   target: 0x0000000112e0be82 (diff: 4000MH), epoch 174(2.36GB)
13:14:31:897   a74   ETH - Total Speed: 13.946 Mh/s, Total Shares: 1, Rejected: 0, Time: 00:01
13:14:31:913   a74   ETH: GPU0 13.946 Mh/s, GPU1 0.000 Mh/s
13:14:40:851   a74   ETH: checking pool connection...
13:14:40:851   a74   sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}


13:15:30:906   a74   buf: {"id":6,"jsonrpc":"2.0","result":true}

13:15:30:968   a74   ETH: checking pool connection...
13:15:30:968   a74   sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

13:15:31:031   a74   buf: {"id":3,"jsonrpc":"2.0","result":["0x791a6a55e7a1627a35a3f696fbdaeeb2062a4009a6c53c5f1d41e8c42c816d82","0x32a2478e57a4b36e5f5e5420e5443a5a82dac6ff01a0548737fada91d743d7d0","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x4fcf54"]}

13:15:32:140   1354   em hbt: 15, fm hbt: 47,
13:15:32:140   1354   watchdog - thread 0 (gpu0), hb time 62
13:15:32:140   1354   watchdog - thread 1 (gpu0), hb time 359
13:15:32:156   1354   watchdog - thread 2 (gpu1), hb time 66313
13:15:32:156   1354   WATCHDOG: GPU 1 hangs in OpenCL call, exit
13:15:32:172   1354   watchdog - thread 3 (gpu1), hb time 65765
13:15:32:172   1354   WATCHDOG: GPU 1 hangs in OpenCL call, exit
13:15:32:297   1354   Quit, please wait...
13:15:43:236   1354   Restarting OK, exit...

what driver are you using

Becuase it only has a MOM file.

 

working !

THNX bro...

Confirm on v11.3 EthMan is now working correctly with a Core i3-6100 and 13 RX 580 8GB cards. CPU utilization when down from ~35% to ~8%. I Also got a ~1 MH/s ETH and ~7 MH/s KEC speed bump dual mining from v11.2 with the Adrenaline 18.3.1 drivers. Thank you for the update!

Please change the folder setup in the zip file. It causes the location names to be too long for windows once extracted.

Hi,

does the automatic dcri detection only work with ASM1 or also in ASM2 Mode?

wow, this is cool. now those "why do they have 30mh/s, mine can't although bios modded" will be lessen, cause these guys dont know how to tune dcri in eth only mode.

cpu consumption improved greatly. from 50% above, now its 5% below. this should lessen electricity consumption.

i do wish we can manually control fan during runtime next update.

thanks.

why now windows and any other av delete file on download ,i cant even extract it

The DAG file of ETH is large. So it is slow.

Awesome. Steady updates from claymore. version 11.3 seems more stable on my system, probably because of less CPU usage.
Now i don't feel so bad giving him so much dev fees.