Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 362. (Read 6590718 times)

Hi,

Thanks for join.

At current hasrate +120 GH/s, approximate time to mine the first block would be 2-4 days, if it's more people join the pool, more hasrate, then we will need less time to mine the first block.

The beginnings are always difficult ... I hope more people join.

hello, I have an issue regarding my miners.. when I remotely connect to my RIGS with third party applications such as team viewer or anydesk.. GPU0 shows 0,00 hashes and claymore restarts.. What might be causing the problem ?

I moved my 3 rigs to your pool as well

update:

mining for an hour no earned xvg.... https://premiumminer.com/?address=D7smhMa6RQYTtX8WyfB3s829doEojRV8wT

I have 3 gpu and want to specify -mvddc 870 for only 2 of them and leave the third at the default specified in the bios

Is -mvddc 0,870,870 correct ? I.e. the first gpu is to take the value specified in the bios

hello, I have an issue regarding my miners.. when I remotely connect to my RIGS with third party applications such as team viewer or anydesk.. GPU0 shows 0,00 hashes and claymore restarts.. What might be causing the problem ?

This is new pool and we must wait to find a first block. Currently hash power is about 131.9 GH/s so first block must be find in next two days. https://premiumminer.com/site/mining

Then we will see what is real earnings from this pool. If more people join this pool and with increasing hash power, finding next blocks will be easier and much quicker.

As I said I am here from last night and will be in next 7 days. After that period I will share my observations about this pool.

https://premiumminer.com/?address=DSGtv2EUE5xGmtZYtdBEWupnL4QcjKY9D3

mining for an hour no earned xvg.... https://premiumminer.com/?address=D7smhMa6RQYTtX8WyfB3s829doEojRV8wT

People just seem to think that open air rigs aren't susceptible to collecting dust, but a can of compressed air always does wonders for things - especially if you are not using a typical external rack rig setup.  It's especially true for enclosed rigs that have been running more than a full year, although in some situations I have found 'dusting' is needed every six months.

Another thing people seem to miss is that even though a card can hold a specific overclock for graphics work, that doesn't mean that running in almost 100% compute mode it is the best setting.  Typically we stress the cards much more than even the best graphics-based benchmarking tools by running the compute intensive miner 24x7 on our GPU cards.

Just using my single-card rig as an example: it's a GTX1060/6GB Gigabyte card that will easily hold +230 core clock offset, but I have backed it down to +220 and later +210 because Claymore is much more stable and tends to get better quantity of shares at that setting.  It would run with +225 forever, but it would get those messages about invalid shares, and regardless of what many people think - 99% of the problems we're having trace back to one of two problems: either OC is set too high or there is a problem with a riser card(s).  Some of them are better than others, and if you run into a batch with problems it is likely going to affect the whole group, not just one riser.  That other 1% can be elusive, but almost every problem can be cured by backing off overclock by 5% or swapping out the riser for the "problem card".

Swapping 50 GHs to your pool.
Antmine, for me, it gives with 40% less.
Nlpool was good, now it's way worse than antminepool.
I hoe your pool can make some difference.

I am having an issue after I extract the Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v11.1 for Windows.  I use 7-zip and after I extract the files I cannot run or access any of the files.  I did notice that 7-zip says the host os uses fat while I have NTFS.  Should I use a different program to extract the files?  I did try winrar as well.

Thank you.

60 Ghs changed to stratum+tcp://mine.premiumminer.com:5766
C'mon ppl, let's bring some more power to this pool, hopefully we will have a place where to mine Verge as we should.
I don't mind to pay fees, but I hate when pools like unimining and antmine steal from us.
I did love NLPOOL but.. is not what it was.
Thanks!

I'll give you a chance. Just keep your promise in next 7 days. I am pretty tired from false fees and/or obvious steal or incompetent mining pool owners.

I'm launching a new pool for XVG Blake2s. 0% FEE during beta, then 1% FEE. No more hidden fees ever. Many pool advertise 0% FEE but they steal 30% - 50% of what we mine.
Multiple premium servers, high availability and load balancing. I've been testing for days but I need real load conditions.

If you can, give me a chance.

https://premiumminer.com

Thanks!