Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 416. (Read 6590565 times)

Thank you for the reply,

I'm afraid I do not have this problem.
I can see all these settings in the command line on top.

I have also 100% keccak rejects on all other pools I tried and different coin.

Good evening! Anybody trying to mine smartcash (keccak) as a dual coin? Trying this pool https://pool-eu.smartcash.cc but no matter what DCRI setting I use (4, 5, 6, 7) I get 100% Keccak rejects.

I had similiar issue. I had this in config file but after loading the miner in was not in command line. Check if u have this "-tstop 85 -tt 65 -fanmin 50 -fanmax 100 -cclock 1200 -mclock 2150 -cvddc 925 -mvddc 925" in the end of command lien after starting the miner" For some reason i had to rewrite "start" to work it again. Happend after switching to v 11

Greetings miners,
I just started new pool for XVG on blake2s algo(for ETH+XVG dual). I will be more than happy if you help to test it and see if everything is okay. We set up only 0.5% fee and in next days or week expect more coins to mine or even few more algos.

BTCstratum+tcp://verge.ehu.bg:5766 BTC

Kind Regards!
Enjoy  

Hi everybody,

I have the following problem.

I have a rig with 7 RX580 mining ETH only with Claymore Miner.

For more than a month I used the following:

-tstop 85 -tt 65 -fanmin 50 -fanmax 100 -cclock 1200 -mclock 2150 -cvddc 925 -mvddc 925

And worked fine by drawing around 850-900Watt.

Suddenly something changed and now is hitting 1400Watt and I can't figure out why.

I used this driver
Win10-64Bit-Crimson-ReLive-Beta-Blockchain-Workloads-Aug23

but I also tried
win10-64bit-radeon-software-adrenalin-edition-18.2.1-feb1 (i compute mode)

and Miner version 10.4, miner 10.6 and today I tried v11.00


No matter what I try the clock and voltage settings are been ignored.

I noticed in the README file it says:
Note: for some drivers versions AMD blocked underclocking for some reason, you can overclock only.

Which drivers do not block?
And why since I didn't change drivers that started happening?

Any ideas?

Thank you
Initcode

Will do, thanks!

Some info for you guys: https://www.bleepingcomputer.com/news/security/satori-botnet-is-now-attacking-ethereum-mining-rigs/

Use -mport 0

mport   remote monitoring/management port. Default value is -3333 (read-only mode), specify "-mport 0" to disable remote monitoring/management feature

Got also had a working rig with 12 radeon r9 390 stabile running, but power use is high, i need 3 PSU to run it
At this time 3 cards are down (power supply cable burns out), rest still works

I also had a second rig with 10GPUs with the 4pin connector riser cards an an asus p10ws stabile for weeks

@Claymore. Seems someone tried to hack my rig. Is it something besides readonly I can do to maximize the security?

21:07:13:777   16c   srv_thr cnt: 1, IP: 185.62.188.88
21:07:13:933   16c   recv: 347
21:07:13:933   16c   srv pck: 347
21:07:13:933   16c   Remote management: read-only mode, command miner_file ignored. Remote IP: 185.62.188.88
21:07:13:933   16c   srv bs: 0
21:07:16:527   67c   ETH: checking pool connection...
21:07:16:527   67c   send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

21:07:16:558   67c   got 243 bytes
21:07:16:558   67c   buf: {"jsonrpc":"2.0","id":0,"result":["0x7cb5899436b86f505c1cc5e84dc220ea0c6e76dbd777843acd6d457a88cab564","0xa74dd84414948aba4bfd6580908dbf9c32a494aa336609746d19a35bb4cccb24","0x000000006df37f675ef6eadf5ab9a2072d44268d97df837e6748956e5c6c2116"]}

21:07:16:558   67c   parse packet: 242
21:07:16:558   67c   ETH: job is the same
21:07:16:558   67c   new buf size: 0
21:07:18:965   9c   srv_thr cnt: 1, IP: 185.62.188.88
21:07:19:012   67c   got 243 bytes
21:07:19:012   67c   buf: {"jsonrpc":"2.0","id":0,"result":["0xeea17940990748fd89c454e57072aaf185d9c1785a5885480afd15f60041cbf0","0xa74dd84414948aba4bfd6580908dbf9c32a494aa336609746d19a35bb4cccb24","0x000000006df37f675ef6eadf5ab9a2072d44268d97df837e6748956e5c6c2116"]}

21:07:19:012   67c   parse packet: 242
21:07:19:012   67c   ETH: job changed
21:07:19:012   67c   new buf size: 0
21:07:19:012   67c   ETH: 02/12/18-21:07:19 - New job from etc-eu1.nanopool.org:19999
21:07:19:012   67c   target: 0x000000006df37f67 (diff: 10000MH), epoch 179(2.40GB)
21:07:19:012   67c   ETH - Total Speed: 180.527 Mh/s, Total Shares: 71, Rejected: 0, Time: 01:19
21:07:19:012   67c   ETH: GPU0 29.654 Mh/s, GPU1 30.187 Mh/s, GPU2 30.176 Mh/s, GPU3 30.185 Mh/s, GPU4 30.168 Mh/s, GPU5 30.156 Mh/s
21:07:19:324   9c   recv: 48
21:07:19:324   9c   srv pck: 48
21:07:19:324   9c   Remote management: read-only only, command miner_reboot ignored. Remote IP: 185.62.188.88
21:07:19:324   9c   srv bs: 0
21:07:22:825   67c   send: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0xac31053", "0x00000000000000000000000000000000000000000000000000000000da52f972"]}


Anyone else gotten this? When u look up the ip adress, no one else but the one and only Hitler appears.

With my calculations Blake much more profitable than keccak. Is there any limitations for adding myr-gr or timetravel algo to dual mode?

I installed "WHQL-Win7-64Bit-Radeon-Software-Crimson-ReLive-17.4.4-May3" (without software because I use RX560 which do not support compute mode)
Earlier I had installed newest beta 18 and older one from aug.. Top speeds were with Adrenalin beta but monitor problem was issue. Every time I was installing software also, and system was unstable and monitor problem was there. After few day efforts  , decided to install without software and it was solution, but seed was few percent lower. Stability was great, and I could overclock.

Try different drivers, but if you can, buy HDMI plugs. Test my theory with 2 monitors on two cards. Shut down PC, connect monitor and power up.

There are many variables Whattomine does not account for, I can not understand how people don't comprehend this.
It blows me away that people are astounded/annoyed when the whattomine projected payout differs from their real world payout.

Nicehash doesn't mine coins directly, you are selling your hashpower to the highest bidder. You will never reach the earnings of the most profitable coin for the algorithm.

go to the first page of this thread and use link from Mega you'll likely to have better luck there

Hi guys, anyone is experiencing issue, when enabled dual mode, hash rate drop significantly?

i have two rigs 6x rx570/2x rx 580+4x rx 570, single mining getting 174, dual mining 171+7500 xvg so these two are fine.
3rd rig (1x rx 580+ 5x rx570, same batch file) is getting 180 single mining, but in dual hash drops to 139+7000 xvg..anyone knows why it can happen? i tried to change -ethi or asm mode without an luck,...


thank you

wait couple of minutes, it will connect eventually.
I tweet them about the this issue but no answer yet, maybe you want to tweet them too so we can push the issue to be fixed.

My guess is that all these XVG pools were not ready to get all Claymore dual mining traffic !!!

not able to connect to antmine pool for Verge mining 9008 nor 9009 port
everytime i get

Server full message

Only able to mine Shield on Antimine in dual

Hello,

i justed tested for 24 hours XVG (blake2s) in claymore dual at nicehash.


Efficiency 100%  !!

0.00% rejected   !!

BUT:



Calculated (and paid) BTC / USD from Nicehash is about 35% of that what is calculated in whattomine!

if i would have mined DCR on coinemine like last month i would have made more BTC/USD!!

SO IN THE END:

FIRST and LAST TIME I TRIED NICEHASH!!

ANY new Information of a stabil and correct paying XVG Pool?