Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 417.

Grinner888

newbie

Activity: 20

Merit: 0

Quote from: maksimad on February 12, 2018, 07:47:27 AM

Quote from: sexontoast on February 12, 2018, 05:22:17 AM

Quote from: sexontoast on February 09, 2018, 03:56:34 AM

Weird issue with multiple AMD RX580's
The switches are only working on the first card so guessing its a syntax error on my behalf,
Could anyone assist (only using 3 of the 8 cards here)

epsw x -mode 1 -ftime 10 -di 0,1,2 -cclock 1150,1150,1150 -mclock 1980,1980,1980 -cvddc 950,950,950 -mvddc 950,950,950

So why would only CARD 0 use the overclock / under clock switches ? other 2 cards are using default values.

- System
Biostar BTC250 Pro (12 GPU)
8GB DDR4
50GB PageFile
Intel Celeron
8 x RX580 4GB Pulse
4 x eVGA SC 1070

Can anyone help with this, I have tried
epsw x -mode 1 -ftime 10 -di 0,1,2 -cclock 1150,1150,1150 -mclock 1980,1980,1980 -cvddc 950,950,950 -mvddc 950,950,950
epsw x -mode 1 -ftime 10 -di 012 -cclock 1150,1150,1150 -mclock 1980,1980,1980 -cvddc 950,950,950 -mvddc 950,950,950

Only the voltage on the first card is changed Sad

Hello,

It is issue with AMD drivers. I had same problem with my rig. Cards are in default clock/voltage mode if you do not connect monitor to it. You can test it if you connect monitor to second card, or connect two monitors on two cards. You will notice that now those two cards can be overclocked.
Solution 1: Install clean AMD drivers (without catalyst), just drivers - Go to device manager and manually install drivers for each card. DDU uninstall is recommended!!!
Solution 2: Buy HDMI dummy on ebay and plug it in each card.

regards. Wink

Hi, how will you enable compute mode if you only install the drivers and not catalyst/crimson?

jrr

newbie

Activity: 24

Merit: 0

-ASM 2 option decrease my hashrate in about 5/6 Mh/s on both my xfx XXX 580 with 8GB and 4GB

ganzocrypt

newbie

Activity: 162

Merit: 0

Quote from: rsabluebulls on February 12, 2018, 02:25:06 PM

Quote from: ganzocrypt on February 12, 2018, 02:15:16 PM

Quote from: rsabluebulls on February 12, 2018, 02:06:32 PM

Hi, Is it worth mining a second coin on Sapphire Radeon Nitro+ RX580 4GB or rather ETH only. (I have 4x Sapphire Radeon Nitro+ RX580 4GB)

I'm currently mining on miningpoolhub and convert coins to ETH wallet.

I am struggling to setup command line for a second coin to test (not sure which 2nd coin is best/most profitably to mine?).

My command line to miningpoolhub looks as follows:

EthDcrMiner64.exe -r -1 -mport 13333 -epool europe.ethash-hub.miningpoolhub.com:17020 -ewal x10bulls.rsabluebulls -epsw x -esm 2 -allpools 1 -allcoins 1 -platform 1 -powlim -10

Thank you for your advise/assistance.

I think is valuable as XVG is down in price right now so it has the potential to go up, few weeks ago was at $0.2

For your card you just need to find a good balance between Eth intensity -ethi and XVG intensity -dcri

I am running Sapphire Pulse RX580 8G at ETC 30.5 Mh/s and XVG at 1800 Mh/s

Would you care to share your command line? also getting 30.5 Mh/s on ETH

I am mining ETC and XVG on a RX580 8Gb so numbers are different for you but you should be able to get some good ones. BTW the -ethi 15 and -dcri 60, the 8 was on another card for some testing.

EthDcrMiner64.exe -di 0 -epool eu1-etc.ethermine.org:4444 -ewal walletaddress.miner1 -epsw x -dpool stratum+tcp://xvg.eu1.unimining.net:5770 -dwal walletaddress -dpsw c=XVG -dcoin blake2s -tstop 85 -tt 65 -fanmin 60 -fanmax 100 -cclock 1280 -mclock 2150 -cvddc 850 -mvddc 850 -eres 2 -gser 2 -dcri 60 -etha 0 -ethi 15 -asm 2 -wd 1 -dbg -1 -platform 1

doughboi81

newbie

Activity: 1

Merit: 0

just added a new msi 1060 card to the rig and getting this error any ideas?

cudaGetDeviceCount return error 38
-> no CUDA-capable device is detected
No NVIDIA CUDA GPUs detected.
No AMD OPENCL or NVIDIA CUDA GPUs found, exit

rsabluebulls

newbie

Activity: 5

Merit: 0

Quote from: ganzocrypt on February 12, 2018, 02:15:16 PM

Quote from: rsabluebulls on February 12, 2018, 02:06:32 PM

Hi, Is it worth mining a second coin on Sapphire Radeon Nitro+ RX580 4GB or rather ETH only. (I have 4x Sapphire Radeon Nitro+ RX580 4GB)

I'm currently mining on miningpoolhub and convert coins to ETH wallet.

I am struggling to setup command line for a second coin to test (not sure which 2nd coin is best/most profitably to mine?).

My command line to miningpoolhub looks as follows:

EthDcrMiner64.exe -r -1 -mport 13333 -epool europe.ethash-hub.miningpoolhub.com:17020 -ewal x10bulls.rsabluebulls -epsw x -esm 2 -allpools 1 -allcoins 1 -platform 1 -powlim -10

Thank you for your advise/assistance.

I think is valuable as XVG is down in price right now so it has the potential to go up, few weeks ago was at $0.2

For your card you just need to find a good balance between Eth intensity -ethi and XVG intensity -dcri

I am running Sapphire Pulse RX580 8G at ETC 30.5 Mh/s and XVG at 1800 Mh/s

Would you care to share your command line? also getting 30.5 Mh/s on ETH

ganzocrypt

newbie

Activity: 162

Merit: 0

Quote from: rsabluebulls on February 12, 2018, 02:06:32 PM

Hi, Is it worth mining a second coin on Sapphire Radeon Nitro+ RX580 4GB or rather ETH only. (I have 4x Sapphire Radeon Nitro+ RX580 4GB)

I'm currently mining on miningpoolhub and convert coins to ETH wallet.

I am struggling to setup command line for a second coin to test (not sure which 2nd coin is best/most profitably to mine?).

My command line to miningpoolhub looks as follows:

EthDcrMiner64.exe -r -1 -mport 13333 -epool europe.ethash-hub.miningpoolhub.com:17020 -ewal x10bulls.rsabluebulls -epsw x -esm 2 -allpools 1 -allcoins 1 -platform 1 -powlim -10

Thank you for your advise/assistance.

I think is valuable as XVG is down in price right now so it has the potential to go up, few weeks ago was at $0.2

For your card you just need to find a good balance between Eth intensity -ethi and XVG intensity -dcri

I am running Sapphire Pulse RX580 8G at ETC 30.5 Mh/s and XVG at 1800 Mh/s with -ethi 8 and -dcri 60

rsabluebulls

newbie

Activity: 5

Merit: 0

Hi, Is it worth mining a second coin on Sapphire Radeon Nitro+ RX580 4GB or rather ETH only. (I have 4x Sapphire Radeon Nitro+ RX580 4GB)

I'm currently mining on miningpoolhub and convert coins to ETH wallet.

I am struggling to setup command line for a second coin to test (not sure which 2nd coin is best/most profitably to mine?).

My command line to miningpoolhub looks as follows:

EthDcrMiner64.exe -r -1 -mport 13333 -epool europe.ethash-hub.miningpoolhub.com:17020 -ewal x10bulls.rsabluebulls -epsw x -esm 2 -allpools 1 -allcoins 1 -platform 1 -powlim -10

Thank you for your advise/assistance.

adyspd

newbie

Activity: 30

Merit: 0

Hello guys,

Did anyone manage to user dual mine ETH/ETC + Keccak ? It's works perfect with blake2s but with Keccak I keep getting KC: Authorization failed : (null) . The worker name and password are 100% valid, I did test them with other miner and they work fine. Is there any trick? Am I missing some options?

Thanks.

Marvell2

full member

Activity: 1148

Merit: 132

Idk why people are running such high dsci , I run at 35 and get around 1000 with my 470s and 570s and 580s , If you want your cards to last a few years I would not crank it up so much

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: lfarkas on February 12, 2018, 12:47:52 PM

Quote from: lfarkas on February 12, 2018, 11:22:11 AM

the API.txt said that the communication is a json rpc 2.0 request/response. although the response do NOT contains the
"jsonrpc":"2.0"
part which is mandatory according to the specification:
http://www.jsonrpc.org/specification#response_object
jsonrpc
A String specifying the version of the JSON-RPC protocol. MUST be exactly "2.0".
would you update the response string?
regards.

what's more you also include "error": null, in case of success which is strictly forbidden:
error
This member is REQUIRED on error.
This member MUST NOT exist if there was no error triggered during invocation.

API.txt does not say that the communication is "a json rpc 2.0 request/response", read it carefully. Also I will not change anything because it can break compatibility with existing applications that use this protocol.
BTW, don't forget to notify pools that they work in a bad way too, for example, they use strickly forbidden thing, just check the miner log:

Quote

17:00:15:813 61c buf: {"id":1,"result":[[["mining.set_difficulty","20"],["mining.notify","56d55ebe2c1cbfbb3fe2058e34c25d92"]],"810001b7",4],"error":null}

lfarkas

newbie

Activity: 7

Merit: 0

Quote from: lfarkas on February 12, 2018, 11:22:11 AM

the API.txt said that the communication is a json rpc 2.0 request/response. although the response do NOT contains the
"jsonrpc":"2.0"
part which is mandatory according to the specification:
http://www.jsonrpc.org/specification#response_object
jsonrpc
A String specifying the version of the JSON-RPC protocol. MUST be exactly "2.0".
would you update the response string?
regards.

what's more you also include "error": null, in case of success which is strictly forbidden:
error
This member is REQUIRED on error.
This member MUST NOT exist if there was no error triggered during invocation.

groovytechno

newbie

Activity: 49

Merit: 0

Here is my update regarding my experience with ZPOOL.

Short story is: Very underwhelming and disappointing.

I threw 60 Gh/s at it for exactly 4 days straight. All of my rigs are running perfectly.

Total Earned: 1459.10726482 XVG

Whattomine says I should have been getting 592.699451 XVG per day, which should have brought me to over 2300 XVG, when in reality I have earned roughly 364 XVG with ZPOOL.

I'm trying UNIMINING now. Hopefully my experience with UNI will be better. I'll report my experiences with UNIMINING after another 4 days.

Thanks again, Claymore - V11 is kicking ass with ETH mining. I'm getting my best hashrate ever since your last update.

lfarkas

newbie

Activity: 7

Merit: 0

the API.txt said that the communication is a json rpc 2.0 request/response. although the response do NOT contains the
"jsonrpc":"2.0"
part which is mandatory according to the specification:
http://www.jsonrpc.org/specification#response_object
jsonrpc
A String specifying the version of the JSON-RPC protocol. MUST be exactly "2.0".
would you update the response string?
regards.

peterboy1

newbie

Activity: 168

Merit: 0

why is my verge earning in uminingpool is way off from whattomine's calculation? it says i can earn 6 xvg in an hour but its been 2 hours now, i still only have 5 total xvg earned.

my total b2s hashrate is 14900mh/s. pool reports my hashrate almost the same as my client's hashrate.

is there any better pool alternative?

thanks

miner05

newbie

Activity: 9

Merit: 0

Quote from: ganzocrypt on February 12, 2018, 10:29:57 AM

Hello,

cannot download the software from Google Drive since it say virus detected, which I know is not the case
Mega download is full so cannot download.

Any suggestion?

https://yadi.sk/d/gd3AqFbG3SKfUo

ganzocrypt

newbie

Activity: 162

Merit: 0

Hello,

cannot download the software from Google Drive since it say virus detected, which I know is not the case
Mega download is full so cannot download.

Any suggestion?

you_remind_me

newbie

Activity: 8

Merit: 0

Keccak-C next perhaps?

Deepcleen

member

Activity: 116

Merit: 10

Quote from: ?? on ??

Quote from: igotfits on February 12, 2018, 01:19:00 AM

Quote from: Vann on February 12, 2018, 01:02:49 AM

Quote from: buddhasource on February 12, 2018, 12:29:38 AM

So this is what I am getting on MSI Armor Rx 580 8GB OC.

Per card in dual mining mode
ETH : 31.43Mh/s Blake2s : 15300Mh/s (XVG)
Estimated daily earning is 14XVG
( This is according to what to mine)

Comparing to lyra2rev2 single mining
lyra2rev2 22741.0 Kh/s
Estimated daily earning is ~30XVG
This is based on what I am getting now.

I now plan to keep only 30% of my hash power for XVG single mode mining and rest in Dual mining with Eth.

You must be using the wrong Verge calculator. The daily earnings for XVG with 15300 MH/s on Blake2s is 141 XVG.

http://whattomine.com/coins/220-xvg-blake-2s?utf8=%E2%9C%93&hr=15300&p=405.0&fee=3&cost=0.12&hcost=0.0&commit=Calculate

whats the difference? isnt it the same coin? im a bit confused about this one.....

https://whattomine.com/coins/220-xvg-blake-2s

https://whattomine.com/coins/150-xvg-scrypt

wallet hasnt synced any advice?

Verge has multiple algorithms - https://whattomine.com/coins/220-xvg-blake-2s is the dual-minable one (Blake-2s); https://whattomine.com/coins/150-xvg-scrypt isn't (Scrypt).

The Dual miner is not optimised well for Vega yet.

maksimad

newbie

Activity: 2

Merit: 0

Quote from: sexontoast on February 12, 2018, 05:22:17 AM

Quote from: sexontoast on February 09, 2018, 03:56:34 AM

Weird issue with multiple AMD RX580's
The switches are only working on the first card so guessing its a syntax error on my behalf,
Could anyone assist (only using 3 of the 8 cards here)

epsw x -mode 1 -ftime 10 -di 0,1,2 -cclock 1150,1150,1150 -mclock 1980,1980,1980 -cvddc 950,950,950 -mvddc 950,950,950

So why would only CARD 0 use the overclock / under clock switches ? other 2 cards are using default values.

- System
Biostar BTC250 Pro (12 GPU)
8GB DDR4
50GB PageFile
Intel Celeron
8 x RX580 4GB Pulse
4 x eVGA SC 1070

Can anyone help with this, I have tried
epsw x -mode 1 -ftime 10 -di 0,1,2 -cclock 1150,1150,1150 -mclock 1980,1980,1980 -cvddc 950,950,950 -mvddc 950,950,950
epsw x -mode 1 -ftime 10 -di 012 -cclock 1150,1150,1150 -mclock 1980,1980,1980 -cvddc 950,950,950 -mvddc 950,950,950

Only the voltage on the first card is changed Sad

Hello,

It is issue with AMD drivers. I had same problem with my rig. Cards are in default clock/voltage mode if you do not connect monitor to it. You can test it if you connect monitor to second card, or connect two monitors on two cards. You will notice that now those two cards can be overclocked.
Solution 1: Install clean AMD drivers (without catalyst), just drivers - Go to device manager and manually install drivers for each card. DDU uninstall is recommended!!!
Solution 2: Buy HDMI dummy on ebay and plug it in each card.

regards. Wink

mshordja

member

Activity: 146

Merit: 10

Quote from: ?? on ??

Quote from: alikait on February 11, 2018, 12:22:52 PM

Quote from: KJCrypto on February 11, 2018, 12:15:40 PM

Anybody else getting a big ETH hash rate drop when dual mining Verge? I have played around with DCRI and it doesn't seem to effect the ETH hash rate much but I took a 26 mh/s hit when I started to dual mine Verge?

Same problem, dual mining doesn't affect my reported ETH hash rate but at my current speed of 480 MH/s reported I've only been getting 350 MH/s average for the last 24 hours. I had my DCRI at 20, dropped it down to 10 and we'll see how it does. I'll add more ram tomorrow to see if that could be the issue.

Keep me posted mate!

I had something similar 182MH/s reported hashrate at ethermine only average effective hashrate of 168MH/s. Now testing on nanopool!

please give feedback after your test. i have same issue.
thanks a lot

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 417. (Read 6590565 times)