Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 418.

Teress

full member

Activity: 224

Merit: 102

Quote from: Stoukie on February 12, 2018, 05:12:54 AM

Quote from: Teress on February 12, 2018, 04:46:27 AM

I tried almost 10 XVG blake2s pools, but problem is on all of them. After a while, sometimes imediately, sometimes after half an hour, or hours, it disconnects. Even on small pools with quite no miners. So I think the problem could be in Claymore itself. Currently I have no pool running stable for a long time found. To antmine or unim absolutelly impossible to connect.

Can someone share which pool is running ok for them, for how long?

Try Unimining, was down for a few hours last night but otherwise running fine...

-dpool stratum+tcp://pool.unimining.net:5770

To check your stats:

https://www.unimining.net/?address=

thanks, but unimining was ok yesterday but today no way to connect Sad

And when I have luck miner connects to some pool, it disconnects after few minutes with:

Socket was closed remotely (by pool)
B2S: Job timeout

Strange is, that pool disconnects all my miners at the same time with same Job timeout error.

Mapuo

hero member

Activity: 910

Merit: 1002

Quote from: Teress on February 12, 2018, 04:46:27 AM

I tried almost 10 XVG blake2s pools, but problem is on all of them. After a while, sometimes imediately, sometimes after half an hour, or hours, it disconnects. Even on small pools with quite no miners. So I think the problem could be in Claymore itself. Currently I have no pool running stable for a long time found. To antmine or unim absolutelly impossible to connect.

Can someone share which pool is running ok for them, for how long?

Ahashpool is stable. And not scam like zpool.

mshordja

member

Activity: 146

Merit: 10

anyone has tried to mine SHIELD with dual?

Stoukie

jr. member

Activity: 30

Merit: 1

Quote from: Teress on February 12, 2018, 04:46:27 AM

I tried almost 10 XVG blake2s pools, but problem is on all of them. After a while, sometimes imediately, sometimes after half an hour, or hours, it disconnects. Even on small pools with quite no miners. So I think the problem could be in Claymore itself. Currently I have no pool running stable for a long time found. To antmine or unim absolutelly impossible to connect.

Can someone share which pool is running ok for them, for how long?

Try Unimining, was down for a few hours last night but otherwise running fine...

-dpool stratum+tcp://pool.unimining.net:5770

To check your stats:

https://www.unimining.net/?address=

dollos

newbie

Activity: 30

Merit: 0

Quote from: FFI2013 on February 10, 2018, 02:55:46 PM

Quote from: Claymore on February 10, 2018, 01:29:08 PM

Quote from: MegoBasha on February 10, 2018, 01:24:55 PM

Hi
how to min XVG Blak2s alone?
Thanks
Mego

From FAQ:

- How to mine Decred or Sia ONLY with this Ethereum Dual miner?
No way. It is Ethereum miner with extra bonus coins. To mine extra coins only use other miners.

It would be awesome if you could package all your miners in one and maybe switch algos on the fly

That here is prob one of the best suggestions i have seen on this thread....

Stoukie

jr. member

Activity: 30

Merit: 1

Quote from: Haruderty on February 12, 2018, 04:31:37 AM

Quote from: Vann on February 12, 2018, 12:02:49 AM

Quote from: buddhasource on February 11, 2018, 11:29:38 PM

So this is what I am getting on MSI Armor Rx 580 8GB OC.

Per card in dual mining mode
ETH : 31.43Mh/s Blake2s : 15300Mh/s (XVG)
Estimated daily earning is 14XVG
( This is according to what to mine)

Comparing to lyra2rev2 single mining
lyra2rev2 22741.0 Kh/s
Estimated daily earning is ~30XVG
This is based on what I am getting now.

I now plan to keep only 30% of my hash power for XVG single mode mining and rest in Dual mining with Eth.

You must be using the wrong Verge calculator. The daily earnings for XVG with 15300 MH/s on Blake2s is 141 XVG.

http://whattomine.com/coins/220-xvg-blake-2s?utf8=%E2%9C%93&hr=15300&p=405.0&fee=3&cost=0.12&hcost=0.0&commit=Calculate

1530MH is for one card.

Confirmed, I get around 1400Mh/s on my Asus RX580 8gig OC per card dual mining XVG on Unimining pool, -dcri 45 currently so I could push up the intensity a bit to increase hashrate but feel 1400 is not bad.

Teress

full member

Activity: 224

Merit: 102

I tried almost 10 XVG blake2s pools, but problem is on all of them. After a while, sometimes imediately, sometimes after half an hour, or hours, it disconnects. Even on small pools with quite no miners. So I think the problem could be in Claymore itself. Currently I have no pool running stable for a long time found. To antmine or unim absolutelly impossible to connect.

Can someone share which pool is running ok for them, for how long?

sadyas

member

Activity: 74

Merit: 10

Quote from: Chiko.Chavez on February 11, 2018, 05:20:23 PM

Uniminingpools last 3 payouts have not worked, XVG pool is offline now also.

It is back to normal now.

Haruderty

full member

Activity: 140

Merit: 100

Quote from: Vann on February 12, 2018, 12:02:49 AM

Quote from: buddhasource on February 11, 2018, 11:29:38 PM

So this is what I am getting on MSI Armor Rx 580 8GB OC.

Per card in dual mining mode
ETH : 31.43Mh/s Blake2s : 15300Mh/s (XVG)
Estimated daily earning is 14XVG
( This is according to what to mine)

Comparing to lyra2rev2 single mining
lyra2rev2 22741.0 Kh/s
Estimated daily earning is ~30XVG
This is based on what I am getting now.

I now plan to keep only 30% of my hash power for XVG single mode mining and rest in Dual mining with Eth.

You must be using the wrong Verge calculator. The daily earnings for XVG with 15300 MH/s on Blake2s is 141 XVG.

http://whattomine.com/coins/220-xvg-blake-2s?utf8=%E2%9C%93&hr=15300&p=405.0&fee=3&cost=0.12&hcost=0.0&commit=Calculate

1530MH is for one card.

sexontoast

newbie

Activity: 27

Merit: 1

Quote from: sexontoast on February 09, 2018, 02:56:34 AM

Weird issue with multiple AMD RX580's
The switches are only working on the first card so guessing its a syntax error on my behalf,
Could anyone assist (only using 3 of the 8 cards here)

epsw x -mode 1 -ftime 10 -di 0,1,2 -cclock 1150,1150,1150 -mclock 1980,1980,1980 -cvddc 950,950,950 -mvddc 950,950,950

So why would only CARD 0 use the overclock / under clock switches ? other 2 cards are using default values.

- System
Biostar BTC250 Pro (12 GPU)
8GB DDR4
50GB PageFile
Intel Celeron
8 x RX580 4GB Pulse
4 x eVGA SC 1070

Can anyone help with this, I have tried
epsw x -mode 1 -ftime 10 -di 0,1,2 -cclock 1150,1150,1150 -mclock 1980,1980,1980 -cvddc 950,950,950 -mvddc 950,950,950
epsw x -mode 1 -ftime 10 -di 012 -cclock 1150,1150,1150 -mclock 1980,1980,1980 -cvddc 950,950,950 -mvddc 950,950,950

Only the voltage on the first card is changed Sad

Chiko.Chavez

newbie

Activity: 21

Merit: 0

Anyone else get a lot less ETH shares when connected to Uni pool as opposed to Ant pool? I do realise the whole 'luck' factor side of things but I feel like a need to hang a horse shoe on my rig when connected to Uniminepool.

EatSleepMining

newbie

Activity: 11

Merit: 0

Quote from: Earl_Vadim on February 12, 2018, 01:45:23 AM

NEW pool http://verge-pool.online FOR VERGE ONLY...
Welcome!!! Port 5500

dead pool

Stoukie

jr. member

Activity: 30

Merit: 1

Unimining was down for a few hours, got socket disconnects, but up again and finding shares.

cvson_vip

newbie

Activity: 2

Merit: 0

coinmarketcal.com

Experimenter

jr. member

Activity: 76

Merit: 2

Quote from: Earl_Vadim on February 12, 2018, 01:45:23 AM

NEW pool http://verge-pool.online FOR VERGE ONLY...
Welcome!!! Port 5500

I just switched a few machines to this pool. Connected right away, so far looks good.

P.S. Antminepool still seem to have problems ("Server full"), at least for me.

bubbagump

jr. member

Activity: 104

Merit: 3

Quote from: Vann on February 12, 2018, 12:02:49 AM

Quote from: buddhasource on February 11, 2018, 11:29:38 PM

So this is what I am getting on MSI Armor Rx 580 8GB OC.

Per card in dual mining mode
ETH : 31.43Mh/s Blake2s : 15300Mh/s (XVG)
Estimated daily earning is 14XVG
( This is according to what to mine)

Comparing to lyra2rev2 single mining
lyra2rev2 22741.0 Kh/s
Estimated daily earning is ~30XVG
This is based on what I am getting now.

I now plan to keep only 30% of my hash power for XVG single mode mining and rest in Dual mining with Eth.

You must be using the wrong Verge calculator. The daily earnings for XVG with 15300 MH/s on Blake2s is 141 XVG.

http://whattomine.com/coins/220-xvg-blake-2s?utf8=%E2%9C%93&hr=15300&p=405.0&fee=3&cost=0.12&hcost=0.0&commit=Calculate

It looks like they just mistyped and added an extra zero on their per card hashrate. I highly doubt that they're actually getting 15.3 GH per card.

valev1

newbie

Activity: 26

Merit: 0

Quote from: hungq8 on February 12, 2018, 02:53:36 AM

NEW pool http://verge-pool.online FOR VERGE ONLY...
Welcome!!! Port 5500

Pool no block found

it's a new pool, needs time and hash power, very soon will start to find blocks

hungq8

newbie

Activity: 4

Merit: 0

NEW pool http://verge-pool.online FOR VERGE ONLY...
Welcome!!! Port 5500

Pool no block found

preda

sr. member

Activity: 756

Merit: 250

So which pool for verge dual mining?

igotfits

full member

Activity: 298

Merit: 100

Figured out how to sync up, click on the red circle at the bottom and uncheck auto-connect input this URL: e3.verge-electrum.com click OK and done. SYNCED up immediately

https://coinguides.org/verge-electrum-wallet-offline-fix/

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 418. (Read 6590718 times)