Topic: Claymore&#039;s Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 500. (Read 6590718 times)

Quote from: muzuca on December 23, 2017, 07:48:16 PM

Quote from: cryptoillusion1 on December 23, 2017, 05:20:08 PM

Quote from: muzuca on December 24, 2017, 05:46:33 AM

Hello guys

When i try to use the OC in the miner the OC settings only apply too GPU0 not GPU1 and so on.

Are this a bug in the program or do i something wrong?

My cards: RX 580
Driver: Win10-64Bit-Crimson-ReLive-Beta-Blockchain-Workloads-Aug23
atikmdag-patcher-1.4.6
Bios flashed: Yes

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal MYWALLET.rig1 -epsw x -mode 1 -tt 65 -fanmin 75 -fanmax 100 -cclock 1200 -mclock 2250 -cvddc 850 -mvddc 850 -dcri 8/12

When i OC with afterburner it work fine on all cards. But i want to use the miner to do it

You will need to specify the parameters for each GPU..e.g. -cclock 1200 ,1200,1200 if you have 3 gpu

It does the same with this Sad

-epsw x -mode 1 -tt 65,65 -fanmin 75,75 -fanmax 100,100 -cclock 1200,1200 -mclock 2250,2250 -cvddc 850,850 -mvddc 850,850 -dcri 8/12

I just try on another server but it dont work there :/
I have also try to put it into the config file
-epsw x
-mode 1
-tt 65,65
-fanmin 75,75
-fanmax 100,100
-cclock 1200,1200
-mclock 2250,2250
-cvddc 850,850
-mvddc 850,850
#-asm 0

But still only GPU0 there get the settings

Try to put just one value for each parameter or specify just in some of them, example:

-epsw x -mode 1 -tt 65 -fanmin 75 -fanmax 100 -cclock 1200 -mclock 2250 -cvddc 850 -mvddc 850 -dcri 12

Another thing that you may test is open and close the miner 3 times... after setting the dag file, close the miner and start agiam.

This process works for me.

Thanks for the replay but still no Sad

Card0: https://gyazo.com/93fd5d922694fb6ae03120cfec3aabfe
Card1: https://gyazo.com/3e48fbdb7db744450b793ea77dca0230

Did you mod the bios? What version of claymore are you using?

Try a different config for gpu1, just to test, like:

-cclock 1200, 1250 -mclock 2250, 2250 -cvddc 850,1000 -mvddc 850,1000

This is the same card that I have... and I’m using crimson beta Aug 23 and Claymore v10.2

It gives the same :/

I use 10.2 and the 23aug driver too.
And i have flashed the bios with this http://1stminingrig.com/best-bios-rom-for-sapphire-rx-580-8gb-special-edition-hynix-memory-31-mhs/

When the miner dosent run it seems that GPU1 are turned off. The LED light are off and the fans are off. Is this normal? And when the miner starts the card starts again

I think this is a normal behavior, only the led that in my case still on independent of the miner.

The link that you share support Hynix and Samsung memories, I didn’t see for Micron, that is your card.

There is a link to the Micron firmware in the comments section https://mega.nz/#F!oi4QERJb!CyJ8-6mNNe0NQApBL2vE0g

So, the next step in my opinion it's changing these configs direct in the bios using Polaris Editor... it's quite easy... I had to do that in some cards when I was using a old version of claymore.

Look my 580 nitro micron gpu config in Polaris: https://ibb.co/dJ4KX6

JKDK

newbie

Activity: 20

Merit: 0

Quote from: JKDK on December 24, 2017, 01:35:43 AM

Quote from: muzuca on December 23, 2017, 10:16:25 PM

Quote from: muzuca on December 23, 2017, 07:48:16 PM

Quote from: cryptoillusion1 on December 23, 2017, 05:20:08 PM

Quote from: JKDK on December 24, 2017, 01:35:43 AM

Hello guys

When i try to use the OC in the miner the OC settings only apply too GPU0 not GPU1 and so on.

Are this a bug in the program or do i something wrong?

My cards: RX 580
Driver: Win10-64Bit-Crimson-ReLive-Beta-Blockchain-Workloads-Aug23
atikmdag-patcher-1.4.6
Bios flashed: Yes

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal MYWALLET.rig1 -epsw x -mode 1 -tt 65 -fanmin 75 -fanmax 100 -cclock 1200 -mclock 2250 -cvddc 850 -mvddc 850 -dcri 8/12

When i OC with afterburner it work fine on all cards. But i want to use the miner to do it

You will need to specify the parameters for each GPU..e.g. -cclock 1200 ,1200,1200 if you have 3 gpu

It does the same with this Sad

-epsw x -mode 1 -tt 65,65 -fanmin 75,75 -fanmax 100,100 -cclock 1200,1200 -mclock 2250,2250 -cvddc 850,850 -mvddc 850,850 -dcri 8/12

I just try on another server but it dont work there :/
I have also try to put it into the config file
-epsw x
-mode 1
-tt 65,65
-fanmin 75,75
-fanmax 100,100
-cclock 1200,1200
-mclock 2250,2250
-cvddc 850,850
-mvddc 850,850
#-asm 0

But still only GPU0 there get the settings

Try to put just one value for each parameter or specify just in some of them, example:

-epsw x -mode 1 -tt 65 -fanmin 75 -fanmax 100 -cclock 1200 -mclock 2250 -cvddc 850 -mvddc 850 -dcri 12

Another thing that you may test is open and close the miner 3 times... after setting the dag file, close the miner and start agiam.

This process works for me.

Thanks for the replay but still no Sad

Card0: https://gyazo.com/93fd5d922694fb6ae03120cfec3aabfe
Card1: https://gyazo.com/3e48fbdb7db744450b793ea77dca0230

Did you mod the bios? What version of claymore are you using?

Try a different config for gpu1, just to test, like:

-cclock 1200, 1250 -mclock 2250, 2250 -cvddc 850,1000 -mvddc 850,1000

This is the same card that I have... and I’m using crimson beta Aug 23 and Claymore v10.2

It gives the same :/

I use 10.2 and the 23aug driver too.
And i have flashed the bios with this http://1stminingrig.com/best-bios-rom-for-sapphire-rx-580-8gb-special-edition-hynix-memory-31-mhs/

When the miner dosent run it seems that GPU1 are turned off. The LED light are off and the fans are off. Is this normal? And when the miner starts the card starts again

I think this is a normal behavior, only the led that in my case still on independent of the miner.

The link that you share support Hynix and Samsung memories, I didn’t see for Micron, that is your card.

There is a link to the Micron firmware in the comments section https://mega.nz/#F!oi4QERJb!CyJ8-6mNNe0NQApBL2vE0g

muzuca

member

Activity: 182

Merit: 13

Quote from: muzuca on December 23, 2017, 10:16:25 PM

Quote from: muzuca on December 23, 2017, 07:48:16 PM

Quote from: cryptoillusion1 on December 23, 2017, 05:20:08 PM

Hello guys

When i try to use the OC in the miner the OC settings only apply too GPU0 not GPU1 and so on.

Are this a bug in the program or do i something wrong?

My cards: RX 580
Driver: Win10-64Bit-Crimson-ReLive-Beta-Blockchain-Workloads-Aug23
atikmdag-patcher-1.4.6
Bios flashed: Yes

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal MYWALLET.rig1 -epsw x -mode 1 -tt 65 -fanmin 75 -fanmax 100 -cclock 1200 -mclock 2250 -cvddc 850 -mvddc 850 -dcri 8/12

When i OC with afterburner it work fine on all cards. But i want to use the miner to do it

You will need to specify the parameters for each GPU..e.g. -cclock 1200 ,1200,1200 if you have 3 gpu

It does the same with this Sad

-epsw x -mode 1 -tt 65,65 -fanmin 75,75 -fanmax 100,100 -cclock 1200,1200 -mclock 2250,2250 -cvddc 850,850 -mvddc 850,850 -dcri 8/12

I just try on another server but it dont work there :/
I have also try to put it into the config file
-epsw x
-mode 1
-tt 65,65
-fanmin 75,75
-fanmax 100,100
-cclock 1200,1200
-mclock 2250,2250
-cvddc 850,850
-mvddc 850,850
#-asm 0

But still only GPU0 there get the settings

Try to put just one value for each parameter or specify just in some of them, example:

-epsw x -mode 1 -tt 65 -fanmin 75 -fanmax 100 -cclock 1200 -mclock 2250 -cvddc 850 -mvddc 850 -dcri 12

Another thing that you may test is open and close the miner 3 times... after setting the dag file, close the miner and start agiam.

This process works for me.

Thanks for the replay but still no Sad

Card0: https://gyazo.com/93fd5d922694fb6ae03120cfec3aabfe
Card1: https://gyazo.com/3e48fbdb7db744450b793ea77dca0230

Did you mod the bios? What version of claymore are you using?

Try a different config for gpu1, just to test, like:

-cclock 1200, 1250 -mclock 2250, 2250 -cvddc 850,1000 -mvddc 850,1000

This is the same card that I have... and I’m using crimson beta Aug 23 and Claymore v10.2

It gives the same :/

I use 10.2 and the 23aug driver too.
And i have flashed the bios with this http://1stminingrig.com/best-bios-rom-for-sapphire-rx-580-8gb-special-edition-hynix-memory-31-mhs/

When the miner dosent run it seems that GPU1 are turned off. The LED light are off and the fans are off. Is this normal? And when the miner starts the card starts again

I think this is a normal behavior, only the led that in my case still on independent of the miner.

The link that you share support Hynix and Samsung memories, I didn’t see for Micron, that is your card.

Ursul0

sr. member

Activity: 857

Merit: 262

Quote from: muzuca on December 23, 2017, 07:48:16 PM

Quote from: cryptoillusion1 on December 23, 2017, 05:20:08 PM

Quote from: Rickirs on December 24, 2017, 01:47:19 AM

Hello guys

When i try to use the OC in the miner the OC settings only apply too GPU0 not GPU1 and so on.

Are this a bug in the program or do i something wrong?

My cards: RX 580
Driver: Win10-64Bit-Crimson-ReLive-Beta-Blockchain-Workloads-Aug23
atikmdag-patcher-1.4.6
Bios flashed: Yes

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal MYWALLET.rig1 -epsw x -mode 1 -tt 65 -fanmin 75 -fanmax 100 -cclock 1200 -mclock 2250 -cvddc 850 -mvddc 850 -dcri 8/12

When i OC with afterburner it work fine on all cards. But i want to use the miner to do it

You will need to specify the parameters for each GPU..e.g. -cclock 1200 ,1200,1200 if you have 3 gpu

It does the same with this Sad

-epsw x -mode 1 -tt 65,65 -fanmin 75,75 -fanmax 100,100 -cclock 1200,1200 -mclock 2250,2250 -cvddc 850,850 -mvddc 850,850 -dcri 8/12

I just try on another server but it dont work there :/
I have also try to put it into the config file
-epsw x
-mode 1
-tt 65,65
-fanmin 75,75
-fanmax 100,100
-cclock 1200,1200
-mclock 2250,2250
-cvddc 850,850
-mvddc 850,850
#-asm 0

But still only GPU0 there get the settings

Try to put just one value for each parameter or specify just in some of them, example:

-epsw x -mode 1 -tt 65 -fanmin 75 -fanmax 100 -cclock 1200 -mclock 2250 -cvddc 850 -mvddc 850 -dcri 12

Another thing that you may test is open and close the miner 3 times... after setting the dag file, close the miner and start again.

This process works for me.

Thanks for the replay but still no Sad

Card0: https://gyazo.com/93fd5d922694fb6ae03120cfec3aabfe
Card1: https://gyazo.com/3e48fbdb7db744450b793ea77dca0230

you should try to dance around your rig naked between 2nd and 3rd miner restart.
please also share your experience with us.

Valik

newbie

Activity: 4

Merit: 0

I hope you know that latest drivers won't work with HD 4xxx series.

Yeah, I've already seen that. I've removed the old card before writing the first post, and later I've removed Catalyst with DDU and did a 'clean' install of the new Radeon drivers.

Quote

- I see only one card instead of two in temperature management info.
Disable CrossFire, don't use Remote Desktop Connection.

I haven't been using either. There's only one card installed as of now, and the miner gives no temperature info at all.

Rickirs

member

Activity: 206

Merit: 20

Quote from: Valik on December 23, 2017, 05:44:09 PM

It's showing like I have two GPUs; one is my normal R390X, and another is "standard".
I have two screens, if that has something to do with...

There is some confusion here, so you are saying now your old card is not detected properly if you have both carts in use ?
I hope you know that latest drivers won't work with HD 4xxx series.

I am not sure if both can be worked together, my advice is that download relevant driver for your old card and unzip somewhere and from there manually update driver for "older one" using device manager.

Also, from the FAQs , I can see this...

Quote

- I see only one card instead of two in temperature management info.
Disable CrossFire, don't use Remote Desktop Connection.

JKDK

newbie

Activity: 20

Merit: 0

Quote from: muzuca on December 23, 2017, 10:16:25 PM

Quote from: muzuca on December 23, 2017, 07:48:16 PM

Quote from: cryptoillusion1 on December 23, 2017, 05:20:08 PM

Hello guys

When i try to use the OC in the miner the OC settings only apply too GPU0 not GPU1 and so on.

Are this a bug in the program or do i something wrong?

My cards: RX 580
Driver: Win10-64Bit-Crimson-ReLive-Beta-Blockchain-Workloads-Aug23
atikmdag-patcher-1.4.6
Bios flashed: Yes

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal MYWALLET.rig1 -epsw x -mode 1 -tt 65 -fanmin 75 -fanmax 100 -cclock 1200 -mclock 2250 -cvddc 850 -mvddc 850 -dcri 8/12

When i OC with afterburner it work fine on all cards. But i want to use the miner to do it

You will need to specify the parameters for each GPU..e.g. -cclock 1200 ,1200,1200 if you have 3 gpu

It does the same with this Sad

-epsw x -mode 1 -tt 65,65 -fanmin 75,75 -fanmax 100,100 -cclock 1200,1200 -mclock 2250,2250 -cvddc 850,850 -mvddc 850,850 -dcri 8/12

I just try on another server but it dont work there :/
I have also try to put it into the config file
-epsw x
-mode 1
-tt 65,65
-fanmin 75,75
-fanmax 100,100
-cclock 1200,1200
-mclock 2250,2250
-cvddc 850,850
-mvddc 850,850
#-asm 0

But still only GPU0 there get the settings

Try to put just one value for each parameter or specify just in some of them, example:

-epsw x -mode 1 -tt 65 -fanmin 75 -fanmax 100 -cclock 1200 -mclock 2250 -cvddc 850 -mvddc 850 -dcri 12

Another thing that you may test is open and close the miner 3 times... after setting the dag file, close the miner and start agiam.

This process works for me.

Thanks for the replay but still no Sad

Card0: https://gyazo.com/93fd5d922694fb6ae03120cfec3aabfe
Card1: https://gyazo.com/3e48fbdb7db744450b793ea77dca0230

Did you mod the bios? What version of claymore are you using?

Try a different config for gpu1, just to test, like:

-cclock 1200, 1250 -mclock 2250, 2250 -cvddc 850,1000 -mvddc 850,1000

This is the same card that I have... and I’m using crimson beta Aug 23 and Claymore v10.2

It gives the same :/

I use 10.2 and the 23aug driver too.
And i have flashed the bios with this http://1stminingrig.com/best-bios-rom-for-sapphire-rx-580-8gb-special-edition-hynix-memory-31-mhs/

When the miner dosent run it seems that GPU1 are turned off. The LED light are off and the fans are off. Is this normal? And when the miner starts the card starts again

muzuca

member

Activity: 182

Merit: 13

Quote from: muzuca on December 23, 2017, 07:48:16 PM

Quote from: cryptoillusion1 on December 23, 2017, 05:20:08 PM

Quote from: muzuca on December 23, 2017, 07:48:16 PM

Hello guys

When i try to use the OC in the miner the OC settings only apply too GPU0 not GPU1 and so on.

Are this a bug in the program or do i something wrong?

My cards: RX 580
Driver: Win10-64Bit-Crimson-ReLive-Beta-Blockchain-Workloads-Aug23
atikmdag-patcher-1.4.6
Bios flashed: Yes

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal MYWALLET.rig1 -epsw x -mode 1 -tt 65 -fanmin 75 -fanmax 100 -cclock 1200 -mclock 2250 -cvddc 850 -mvddc 850 -dcri 8/12

When i OC with afterburner it work fine on all cards. But i want to use the miner to do it

You will need to specify the parameters for each GPU..e.g. -cclock 1200 ,1200,1200 if you have 3 gpu

It does the same with this Sad

-epsw x -mode 1 -tt 65,65 -fanmin 75,75 -fanmax 100,100 -cclock 1200,1200 -mclock 2250,2250 -cvddc 850,850 -mvddc 850,850 -dcri 8/12

I just try on another server but it dont work there :/
I have also try to put it into the config file
-epsw x
-mode 1
-tt 65,65
-fanmin 75,75
-fanmax 100,100
-cclock 1200,1200
-mclock 2250,2250
-cvddc 850,850
-mvddc 850,850
#-asm 0

But still only GPU0 there get the settings

Try to put just one value for each parameter or specify just in some of them, example:

-epsw x -mode 1 -tt 65 -fanmin 75 -fanmax 100 -cclock 1200 -mclock 2250 -cvddc 850 -mvddc 850 -dcri 12

Another thing that you may test is open and close the miner 3 times... after setting the dag file, close the miner and start agiam.

This process works for me.

Thanks for the replay but still no Sad

Card0: https://gyazo.com/93fd5d922694fb6ae03120cfec3aabfe
Card1: https://gyazo.com/3e48fbdb7db744450b793ea77dca0230

Did you mod the bios? What version of claymore are you using?

Try a different config for gpu1, just to test, like:

-cclock 1200, 1250 -mclock 2250, 2250 -cvddc 850,1000 -mvddc 850,1000

This is the same card that I have... and I’m using crimson beta Aug 23 and Claymore v10.2

JKDK

newbie

Activity: 20

Merit: 0

Quote from: cryptoillusion1 on December 23, 2017, 05:20:08 PM

Hello guys

When i try to use the OC in the miner the OC settings only apply too GPU0 not GPU1 and so on.

Are this a bug in the program or do i something wrong?

My cards: RX 580
Driver: Win10-64Bit-Crimson-ReLive-Beta-Blockchain-Workloads-Aug23
atikmdag-patcher-1.4.6
Bios flashed: Yes

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal MYWALLET.rig1 -epsw x -mode 1 -tt 65 -fanmin 75 -fanmax 100 -cclock 1200 -mclock 2250 -cvddc 850 -mvddc 850 -dcri 8/12

When i OC with afterburner it work fine on all cards. But i want to use the miner to do it

You will need to specify the parameters for each GPU..e.g. -cclock 1200 ,1200,1200 if you have 3 gpu

It does the same with this Sad

-epsw x -mode 1 -tt 65,65 -fanmin 75,75 -fanmax 100,100 -cclock 1200,1200 -mclock 2250,2250 -cvddc 850,850 -mvddc 850,850 -dcri 8/12

I just try on another server but it dont work there :/
I have also try to put it into the config file
-epsw x
-mode 1
-tt 65,65
-fanmin 75,75
-fanmax 100,100
-cclock 1200,1200
-mclock 2250,2250
-cvddc 850,850
-mvddc 850,850
#-asm 0

But still only GPU0 there get the settings

Try to put just one value for each parameter or specify just in some of them, example:

-epsw x -mode 1 -tt 65 -fanmin 75 -fanmax 100 -cclock 1200 -mclock 2250 -cvddc 850 -mvddc 850 -dcri 12

Another thing that you may test is open and close the miner 3 times... after setting the dag file, close the miner and start again.

This process works for me.

Thanks for the replay but still no Sad

Card0: https://gyazo.com/93fd5d922694fb6ae03120cfec3aabfe
Card1: https://gyazo.com/3e48fbdb7db744450b793ea77dca0230

muzuca

member

Activity: 182

Merit: 13

Quote from: cryptoillusion1 on December 23, 2017, 05:20:08 PM

Hello guys

When i try to use the OC in the miner the OC settings only apply too GPU0 not GPU1 and so on.

Are this a bug in the program or do i something wrong?

My cards: RX 580
Driver: Win10-64Bit-Crimson-ReLive-Beta-Blockchain-Workloads-Aug23
atikmdag-patcher-1.4.6
Bios flashed: Yes

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal MYWALLET.rig1 -epsw x -mode 1 -tt 65 -fanmin 75 -fanmax 100 -cclock 1200 -mclock 2250 -cvddc 850 -mvddc 850 -dcri 8/12

When i OC with afterburner it work fine on all cards. But i want to use the miner to do it

You will need to specify the parameters for each GPU..e.g. -cclock 1200 ,1200,1200 if you have 3 gpu

It does the same with this Sad

-epsw x -mode 1 -tt 65,65 -fanmin 75,75 -fanmax 100,100 -cclock 1200,1200 -mclock 2250,2250 -cvddc 850,850 -mvddc 850,850 -dcri 8/12

I just try on another server but it dont work there :/
I have also try to put it into the config file
-epsw x
-mode 1
-tt 65,65
-fanmin 75,75
-fanmax 100,100
-cclock 1200,1200
-mclock 2250,2250
-cvddc 850,850
-mvddc 850,850
#-asm 0

But still only GPU0 there get the settings

Try to put just one value for each parameter or specify just in some of them, example:

-epsw x -mode 1 -tt 65 -fanmin 75 -fanmax 100 -cclock 1200 -mclock 2250 -cvddc 850 -mvddc 850 -dcri 12

Another thing that you may test is open and close the miner 3 times... after setting the dag file, close the miner and start again.

This process works for me.

JKDK

newbie

Activity: 20

Merit: 0

Quote from: cryptoillusion1 on December 23, 2017, 05:20:08 PM