Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 580.

DONcoinDEV

newbie

Activity: 37

Merit: 0

Quote from: SummersideGuy on September 29, 2017, 08:41:47 AM

Quote from: DONcoinDEV on September 29, 2017, 06:11:04 AM

i just installed windows 7 64 bit
when i click on .bat file EthDcrMiner64.exe has stopped working..
even i am facing this same error on all miners..

but in another partition of SSD's windos 10 64 miner working fine..

i have another problem in windows 7 64 bit out of 5 GPUs 1 GPU showing yellow and 4 GPUs showing correct.

how to fix this 2 probles?

Windows 7 does not work with Claymore + Blockchain drivers

so which driver is good for windows 7 64 bit?

and if i install new drivers will my 5th GPU will detect ?

el.list.jt

newbie

Activity: 2

Merit: 0

Quote from: Call_Me_Bambi on September 28, 2017, 05:52:45 PM

Quote from: el.list.jt on September 28, 2017, 05:34:00 PM

Hello i need help with using Claymore miner i'm currently using 1 EVGA GEFORCE GTX 1060 and 3 RX 580 Red Dragon PowerColor. It was mining good yesterday it was generating 25/Mhs per the red dragon and 15/Mhs for the EVGA. I have the ASRock Pro 110 BTC motherboard which supports up to 13/GPU. I was using Jaxx as a wallet but i'm going to be switching to Exodus which i read was alot better. Please help me with the directions or what i need to do to make this mine again or any other way. I was mining ETH not classic. In red it shows

ETH: Share Rejected!
Socket was closed remotely (by pool)
ETH Job Timeout, disconnect, retry in 20 sec...

and it keeps on repeating itselft.

It says the pool i was connected to is cn1.ethermine.org:14444

I don't see a "cn1" server on the Ethmine pool for ETH or ETC, only for Zcash and the config for that is "cn1-zcash.flypool.org:3333".
For ETH it would be, for example, "eu1.ethermine.org:4444", or "asia1.ethermine.org:4444"
If you post your full Claymore config we may be able to help more.

Please see the information below. The only thing i updated was the wallet address and my name. Thanks
EthDcrMiner64.exe -epool eth-eu1.nanopool.org:9999 -ewal 0xef830d6772ece5c5dbc55d7469e526a8376e8d03/Elito/YOUR_EMAIL -epsw x -mode 1 -ftime 10

Please let me know what is the best mining software to use with the current rig that i have in place. Thanks

SummersideGuy

sr. member

Activity: 518

Merit: 250

I am a meat Popsicle

Quote from: DONcoinDEV on September 29, 2017, 06:11:04 AM

i just installed windows 7 64 bit
when i click on .bat file EthDcrMiner64.exe has stopped working..
even i am facing this same error on all miners..

but in another partition of SSD's windos 10 64 miner working fine..

i have another problem in windows 7 64 bit out of 5 GPUs 1 GPU showing yellow and 4 GPUs showing correct.

how to fix this 2 probles?

Windows 7 does not work with Claymore + Blockchain drivers

DONcoinDEV

newbie

Activity: 37

Merit: 0

i just installed windows 7 64 bit
when i click on .bat file EthDcrMiner64.exe has stopped working..
even i am facing this same error on all miners..

but in another partition of SSD's windos 10 64 miner working fine..

i have another problem in windows 7 64 bit out of 5 GPUs 1 GPU showing yellow and 4 GPUs showing correct.

how to fix this 2 probles?

Didldak

full member

Activity: 150

Merit: 100

Oh boy!

Confirming the overclock issue. Got six values for OC in config.txt. During the first time run of CM miner, only 1st GPU get's OC'ed. When I close and reopen the miner, everything works fine.

Demarsac

sr. member

Activity: 504

Merit: 272

Quote from: jang430 on September 29, 2017, 04:40:39 AM

Does v10 support ETH and ZCash Dual mine? Under Windows. Also, I have a mixture of 5 GTX 1070s, and 6 RX 580s.

No

These 2 cannot be combined for dual mining

jang430

newbie

Activity: 32

Merit: 0

Does v10 support ETH and ZCash Dual mine? Under Windows. Also, I have a mixture of 5 GTX 1070s, and 6 RX 580s.

Yohow

member

Activity: 66

Merit: 10

Which are the best pools for mining Ethereum Classic? May be Nanopool? Etc.ethermine? And the best Wallet for ETC? I'm thinking to change to ETC+DCR since ETH profitability falls. Many thanks in advance

veliki_dex

newbie

Activity: 4

Merit: 0

Quote from: rodyw on September 28, 2017, 08:49:05 AM

Quote from: veliki_dex on September 28, 2017, 06:55:54 AM

Hi all, I have problem with version 10, after blockchain driver update, overclock from claymore not working properly.
On boot and first start of miner only first card gets overclocked, and if I manually close miner and start it again it works properly.
I use -r 1 flag so if I set -minspeed miner reboot entire PC, and same thing happens again

Did you update the driver from a previous version or did you removed the old driver first with DDU? Maybe there are some leftovers from your previous driver.

I used DDU, I'll try clean install tomorrow

Yohow

member

Activity: 66

Merit: 10

Quote from: DONcoinDEV on September 28, 2017, 10:40:05 AM

Quote from: Yohow on September 27, 2017, 11:13:06 PM

Quote from: Vann on September 27, 2017, 06:33:25 PM

Quote from: DONcoinDEV on September 27, 2017, 05:53:55 PM

when i mine only ETC i get 26mh/s single rx 470

if dual mine etc+dcr only 20 for ETC and 600 in DCR

is that normal

You can adjust the secondary coin intensity with the +/- keys while dual mining. Once you find the best intensity that maximizes the hash rate of the second coin without lowering the ETH hash rate, you can set it in your command line or configuration file with the -dcri parameter.

My RX 470 Shappire Nitro Plus 8GB reaches 28.8~29 MH/s on ETH (-dcri 23)

u mean like this

EthDcrMiner64.exe -epool us1.ethpool.org:3333 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F.YourWorkerName -epsw x -dpool stratum+tcp://yiimp.ccminer.org:3252 -dwal DsUt9QagrYLvSkJHXCvhfiZHKafVtzd7Sq4 -dpsw x -dcri 23

Correct!

Call_Me_Bambi

sr. member

Activity: 574

Merit: 261

Quote from: el.list.jt on September 28, 2017, 05:34:00 PM

Hello i need help with using Claymore miner i'm currently using 1 EVGA GEFORCE GTX 1060 and 3 RX 580 Red Dragon PowerColor. It was mining good yesterday it was generating 25/Mhs per the red dragon and 15/Mhs for the EVGA. I have the ASRock Pro 110 BTC motherboard which supports up to 13/GPU. I was using Jaxx as a wallet but i'm going to be switching to Exodus which i read was alot better. Please help me with the directions or what i need to do to make this mine again or any other way. I was mining ETH not classic. In red it shows

ETH: Share Rejected!
Socket was closed remotely (by pool)
ETH Job Timeout, disconnect, retry in 20 sec...

and it keeps on repeating itselft.

It says the pool i was connected to is cn1.ethermine.org:14444

I don't see a "cn1" server on the Ethmine pool for ETH or ETC, only for Zcash and the config for that is "cn1-zcash.flypool.org:3333".
For ETH it would be, for example, "eu1.ethermine.org:4444", or "asia1.ethermine.org:4444"
If you post your full Claymore config we may be able to help more.

el.list.jt

newbie

Activity: 2

Merit: 0

Hello i need help with using Claymore miner i'm currently using 1 EVGA GEFORCE GTX 1060 and 3 RX 580 Red Dragon PowerColor. It was mining good yesterday it was generating 25/Mhs per the red dragon and 15/Mhs for the EVGA. I have the ASRock Pro 110 BTC motherboard which supports up to 13/GPU. I was using Jaxx as a wallet but i'm going to be switching to Exodus which i read was alot better. Please help me with the directions or what i need to do to make this mine again or any other way. I was mining ETH not classic. In red it shows

ETH: Share Rejected!
Socket was closed remotely (by pool)
ETH Job Timeout, disconnect, retry in 20 sec...

and it keeps on repeating itselft.

It says the pool i was connected to is cn1.ethermine.org:14444

kkourmousis

member

Activity: 119

Merit: 10

Quote from: Claymore on September 28, 2017, 11:07:06 AM

1. I still cannot reproduce this issue, I described what tests I did: https://bitcointalksearch.org/topic/m.21966972
If you have ste-by-step guide how to reproduce this issue - let me know.
2. I'm not sure if it is possible to fix this issue at all, since all these issues are from buggy ADL.

Thank for your reply.

Regarding problem #1, I will try to think what is different between my case and what you tried. It is not a big problem though, since a simple -minspeed parameter can solve the issue

As for problem #2, thank you very much for the deads up. Knowing that we are stuck with those ADL bugs is way better than having false hopes

Keep up the good work

Quote from: NewbieMiner17 on September 28, 2017, 10:22:02 AM

Man on a mission I like it Grin

Well it seems like "Mission Impossible" Cool

Joker_SK

newbie

Activity: 4

Merit: 0

Hello :-)
im pretty sure i have missed something, but im really noob on linux, managed to get my RX460 rig running on xubuntu 16.04.3and amd gpu-pro 17.30 drivers.
For some reason i cannot change the voltages and clock, not even the power limit is working. Interesting enough, i can set the temp limit, change fanspeed and i can see the temps etc.
What am i missing here friends?

NavyCuda

member

Activity: 107

Merit: 10

I have a gtx 970 mining on claymore’s 9.8 in ubuntu 14.04. Uptime/runtime is somehwere north of two months. Hashrate still is good, but I’m wondering should I occasionally restart the miner or let it keep running until it crashes or the power goes out?

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: kkourmousis on September 28, 2017, 08:51:10 AM

As I said, I am not happy to see that those problems are getting noticed by more users everyday. For myself, lowering the voltages seems to did the trick but I still experience some freezes now and then (I guess that I didn't lower them enough).
I am hoping that with so many cases around, Mr. Claymore can verify the existence of the problem.
What I would like to hear from Mr. Claymore is if there are any thoughts for a solution and what I would love to hear is an ETA if one exists.

1. I still cannot reproduce this issue, I described what tests I did: https://bitcointalksearch.org/topic/m.21966972
If you have ste-by-step guide how to reproduce this issue - let me know.
2. I'm not sure if it is possible to fix this issue at all, since all these issues are from buggy ADL.

DONcoinDEV

newbie

Activity: 37

Merit: 0

Quote from: Yohow on September 27, 2017, 11:13:06 PM

Quote from: Vann on September 27, 2017, 06:33:25 PM

Quote from: DONcoinDEV on September 27, 2017, 05:53:55 PM

when i mine only ETC i get 26mh/s single rx 470

if dual mine etc+dcr only 20 for ETC and 600 in DCR

is that normal

You can adjust the secondary coin intensity with the +/- keys while dual mining. Once you find the best intensity that maximizes the hash rate of the second coin without lowering the ETH hash rate, you can set it in your command line or configuration file with the -dcri parameter.

My RX 470 Shappire Nitro Plus 8GB reaches 28.8~29 MH/s on ETH (-dcri 23)

u mean like this

EthDcrMiner64.exe -epool us1.ethpool.org:3333 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F.YourWorkerName -epsw x -dpool stratum+tcp://yiimp.ccminer.org:3252 -dwal DsUt9QagrYLvSkJHXCvhfiZHKafVtzd7Sq4 -dpsw x -dcri 23

NewbieMiner17

newbie

Activity: 46

Merit: 0

Quote from: kkourmousis on September 28, 2017, 08:51:10 AM

I am sad to see that many people now have experienced the issues I have reported within the first few hours of Claymore V.10.0:

Quote from: kkourmousis on September 05, 2017, 03:10:55 AM

Sometimes miner can't reach maximum speed. I open the miner, clocks and voltages are being set properly but hashrate lies in the 225mh/s area. A simple miner restart resolves the issue
Computer freezes. This has happened 2 times in my rig and 1 time in my PC (same setup with 1 gpu only) in the last 2 days

For those that read the thread daily, you may remember I put great efforts in gathering other user's symptoms and finding the cause of the second problem (the freeze problem), in this post. I concluded that:

Quote from: kkourmousis on September 17, 2017, 05:33:55 PM

My "verdict" is that sometimes when the miner starts it causes a power consumption spike, which may be above your rig's max power. For me it happened almost always after a connection loss and sometimes after a gpu hang.
If you experience rig freezes with blockchain drivers and Claymore v.10.0, the miner could be causing spikes that are beyond your PSUs capabilities

As I said, I am not happy to see that those problems are getting noticed by more users everyday. For myself, lowering the voltages seems to did the trick but I still experience some freezes now and then (I guess that I didn't lower them enough).

I am hoping that with so many cases around, Mr. Claymore can verify the existence of the problem.

What I would like to hear from Mr. Claymore is if there are any thoughts for a solution and what I would love to hear is an ETA if one exists.

Man on a mission I like it Grin

kkourmousis

member

Activity: 119

Merit: 10

I am sad to see that many people now have experienced the issues I have reported within the first few hours of Claymore V.10.0:

Quote from: kkourmousis on September 05, 2017, 03:10:55 AM

Sometimes miner can't reach maximum speed. I open the miner, clocks and voltages are being set properly but hashrate lies in the 225mh/s area. A simple miner restart resolves the issue
Computer freezes. This has happened 2 times in my rig and 1 time in my PC (same setup with 1 gpu only) in the last 2 days

For those that read the thread daily, you may remember I put great efforts in gathering other user's symptoms and finding the cause of the second problem (the freeze problem), in this post. I concluded that:

Quote from: kkourmousis on September 17, 2017, 05:33:55 PM

My "verdict" is that sometimes when the miner starts it causes a power consumption spike, which may be above your rig's max power. For me it happened almost always after a connection loss and sometimes after a gpu hang.
If you experience rig freezes with blockchain drivers and Claymore v.10.0, the miner could be causing spikes that are beyond your PSUs capabilities

As I said, I am not happy to see that those problems are getting noticed by more users everyday. For myself, lowering the voltages seems to did the trick but I still experience some freezes now and then (I guess that I didn't lower them enough).

I am hoping that with so many cases around, Mr. Claymore can verify the existence of the problem.

What I would like to hear from Mr. Claymore is if there are any thoughts for a solution and what I would love to hear is an ETA if one exists.

rodyw

full member

Activity: 378

Merit: 102

Quote from: veliki_dex on September 28, 2017, 06:55:54 AM

Hi all, I have problem with version 10, after blockchain driver update, overclock from claymore not working properly.
On boot and first start of miner only first card gets overclocked, and if I manually close miner and start it again it works properly.
I use -r 1 flag so if I set -minspeed miner reboot entire PC, and same thing happens again

Did you update the driver from a previous version or did you removed the old driver first with DDU? Maybe there are some leftovers from your previous driver.

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 580. (Read 6590565 times)