Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 609. (Read 6590565 times)
September 08, 2017, 06:06:22 PM
I'm trying to diagnose a pool configuration problem with Awesome Miner and Mining Pool Hub. Is there any way to log or view what the actual full command line is that was used to be launch Claymore?
September 08, 2017, 05:58:21 PM
Update. Vega 56
36MH/s 135W at wall (wattmeter)
-15% powerlimit (But I guess it's not usefull because I reduce a lot the GPU clock, I 'll check the effect of this later
Core 925
Mem 970
Fan 80%
https://imgur.com/a/VCXm7
36MH/s 135W at wall (wattmeter)
-15% powerlimit (But I guess it's not usefull because I reduce a lot the GPU clock, I 'll check the effect of this later
Core 925
Mem 970
Fan 80%
https://imgur.com/a/VCXm7
September 08, 2017, 05:44:38 PM
Just receive my RX VEGA 56 (Thanks LDLC.com and the discount Sapphire RX VEGA 56 (405€) )
Fresh install win 10 + last driver, after a few tests, I got 35 MH/s for something like 150W
What I can tell :
AfterBurner do not like Vega
WattMan is not really friendly
Voltage control seems not to work great
I'll try to improve that and test blockchain drivers etc ...
Fresh install win 10 + last driver, after a few tests, I got 35 MH/s for something like 150W
What I can tell :
AfterBurner do not like Vega
WattMan is not really friendly
Voltage control seems not to work great
I'll try to improve that and test blockchain drivers etc ...
I tested it: was 205watts for 35.5mhs - at perfect share find times for 35.5mhs (-5% powertune and 930mhz HBM2, P6 and P7 states set 1030, fan 3600rpm)!
And -24% powertune was 31mhs at correct share found times for 31.5mhs at the pool - using 165watts.
PSU used is 90% efficiency, so actual power draw was 184.5watts for 35.5mhs and 148.5watts for 31mhs. I suppose, a more efficient PSU would help. LOL
May try Blockchain drivers, but apparently those are for RX 580s and RX 570s - so don't expect any improvement.
Over 950mhz and 980mhz HBM2 speed: correct shares were severely impaired from the pool (pretty crap) - unstable.
Not really good for mining, but excellent for PC gaming. Up to 18% faster than a GTX 1070 when PC gaming with the undervolt and overclock
September 08, 2017, 05:25:22 PM
Just receive my RX VEGA 56 (Thanks LDLC.com and the discount Sapphire RX VEGA 56 (405€) )
Fresh install win 10 + last driver, after a few tests, I got 35 MH/s for something like 150W
What I can tell :
AfterBurner do not like Vega
WattMan is not really friendly
Voltage control seems not to work great
I'll try to improve that and test blockchain drivers etc ...
Fresh install win 10 + last driver, after a few tests, I got 35 MH/s for something like 150W
What I can tell :
AfterBurner do not like Vega
WattMan is not really friendly
Voltage control seems not to work great
I'll try to improve that and test blockchain drivers etc ...
September 08, 2017, 04:42:47 PM
Hello boys... Why i getting this error ?
"Received unknown response: {"id":null,"method":"mining.notify","params":["1695",
"0xe794400c315d44b7117b6f0e437046c97d0761906d51ef307b48c51fc1c9706d","0x6d29f6dd
1270e49744bd5377ec86395b2de2abbe54bae16281b8e39b35538dcd","0x0000000394427b08175
efa9a9eb59b9123e2969bf19bf272b20787ed022fbe6c",true]}"
Mining working ... i geting shares etc but i dont like this msg ... is red
Its ok ? Or i need change smth ?
My "bat"
"ethdcrminer64 -mode 1 -epool stratum+tcp://exppool.servehttp.com:8010 -ewal 0x8eF5a92f03D34532e94C299f04e21601400591F9 -epsw x -eworker GTX1060 -allcoins 1 -esm 0"
I tried change esm to 1 or 2... nothing help
Ty for help
"Received unknown response: {"id":null,"method":"mining.notify","params":["1695",
"0xe794400c315d44b7117b6f0e437046c97d0761906d51ef307b48c51fc1c9706d","0x6d29f6dd
1270e49744bd5377ec86395b2de2abbe54bae16281b8e39b35538dcd","0x0000000394427b08175
efa9a9eb59b9123e2969bf19bf272b20787ed022fbe6c",true]}"
Mining working ... i geting shares etc but i dont like this msg ... is red
Its ok ? Or i need change smth ?My "bat"
"ethdcrminer64 -mode 1 -epool stratum+tcp://exppool.servehttp.com:8010 -ewal 0x8eF5a92f03D34532e94C299f04e21601400591F9 -epsw x -eworker GTX1060 -allcoins 1 -esm 0"
I tried change esm to 1 or 2... nothing help
Ty for help
September 08, 2017, 04:40:30 PM
I don't know if it is specific to me, but I also have issues installing drivers in win10 for vega. I get one driver installation, after that something always goes wrong and I have to reinstall windows.
Awesome it's not just me. I have the same issue's that I get 1 installed fine anything after that it's a 50/50 chance that the driver installs correctly for the other 9 Vega gpu's. I haven't tried another driver yet besides the Aug23 blockchain driver. Have you? Trying to compare notes to see what else to test to try and get them hashing. I've spent WAY to much time on get more that 1 Vega GPU working...
I'm running 2x Vega FE. The public drivers I've run are Vega FE release drivers, Vega FE beta(public) and the aug. 23 block chain drivers.
I got both cards up to 42.4Mh/s last night. Windows updated and restarted the computer and I can't get them past 36mh/s now. Very frustrating.
Windows update usually installs newest GPU drivers. So just uninstall your drivers with DDU in safe mode, reinstall proper drivers, and disable windows update.
Windows update did not change the display drivers according to radeon control.
September 08, 2017, 04:36:38 PM
i installed this driver
Win10-64Bit-Crimson-ReLive-Beta-Blockchain-Workloads-Aug23
but in device manager no drivers and when i tried start miner miner also saying no amd gpu
how to fix it?
and should i install AMD ReLive also for mining
Win10-64Bit-Crimson-ReLive-Beta-Blockchain-Workloads-Aug23
but in device manager no drivers and when i tried start miner miner also saying no amd gpu
how to fix it?
and should i install AMD ReLive also for mining
Did you run the pixel patcher, needed if gpu bios has been flashed (and maybe if using latest Blockchain drivers - I'm not sure).
https://www.monitortests.com/forum/Thread-AMD-ATI-Pixel-Clock-Patcher
"1.4.4: Added patch for BIOS signature check."
September 08, 2017, 04:17:56 PM
Hi again! With new amd bc drivers (23 aug) and Clay 10.0 I flashed UberMix 3.1 straps to these cards (Asus Dual OC). They are working fine but 1162/1960/900mV - 28 mh per card.
Sudden OpenCL errors happens.
I think, we have to calm down and wait for new Clay release
Sudden OpenCL errors happens.
I think, we have to calm down and wait for new Clay release
Try UberMix v2.3. I have Asus Dual OC as well (but 480's instead of your 580's) with Samsung memory and it works better with v2.3 than v3.1.
Asus Dual are quite unstable with mem clocks 2000 and up, which is quite strange, but I guess the main problem is in their VRM's design.
September 08, 2017, 04:06:24 PM
i installed this driver
Win10-64Bit-Crimson-ReLive-Beta-Blockchain-Workloads-Aug23
but in device manager no drivers and when i tried start miner miner also saying no amd gpu
how to fix it?
and should i install AMD ReLive also for mining
Win10-64Bit-Crimson-ReLive-Beta-Blockchain-Workloads-Aug23
but in device manager no drivers and when i tried start miner miner also saying no amd gpu
how to fix it?
and should i install AMD ReLive also for mining
Did you run the pixel patcher, needed if gpu bios has been flashed (and maybe if using latest Blockchain drivers - I'm not sure).
https://www.monitortests.com/forum/Thread-AMD-ATI-Pixel-Clock-Patcher
"1.4.4: Added patch for BIOS signature check."
and should i install AMD ReLive?
If you mean the Relive module in the driver installer then no since has nothing to do with mining and would just be a waste to install unless you are going to Capture, stream and share. But if you are talking about the blockchain driver (relive) it will bring better hashrate for ETH but the power consumption will be a little higher.
September 08, 2017, 03:58:29 PM
i installed this driver
Win10-64Bit-Crimson-ReLive-Beta-Blockchain-Workloads-Aug23
but in device manager no drivers and when i tried start miner miner also saying no amd gpu
how to fix it?
and should i install AMD ReLive also for mining
Win10-64Bit-Crimson-ReLive-Beta-Blockchain-Workloads-Aug23
but in device manager no drivers and when i tried start miner miner also saying no amd gpu
how to fix it?
and should i install AMD ReLive also for mining
Did you run the pixel patcher, needed if gpu bios has been flashed (and maybe if using latest Blockchain drivers - I'm not sure).
https://www.monitortests.com/forum/Thread-AMD-ATI-Pixel-Clock-Patcher
"1.4.4: Added patch for BIOS signature check."
and should i install AMD ReLive?
September 08, 2017, 03:45:33 PM
I tried plugging pcie riser to pci slot and killed my rx 480 8gb 
( /slitwrists
( /slitwristsnot sure I understand what you did...maybe you just killed the pcie slot on the motherboard ? try your GPU in another computer !
No. I plugged a PCIE riser 1x to 16x, the 1x connector in to a PCI slot (different than pci express) they do fit in there the same. When I powered on the pc, smoke started coming out of the pci slot so I pulled it out quickly but it was too late. The damage was done. Ive tried connecting it to a pcie slot on to different pc's and both are unable to recognize the graphic card. Either in device manager or amd driver download. Error 175 or 182 on amd code.
Probably should have googled is it safe to use pcie risers in pci slot.
September 08, 2017, 03:44:41 PM
I don't know if it is specific to me, but I also have issues installing drivers in win10 for vega. I get one driver installation, after that something always goes wrong and I have to reinstall windows.
Awesome it's not just me. I have the same issue's that I get 1 installed fine anything after that it's a 50/50 chance that the driver installs correctly for the other 9 Vega gpu's. I haven't tried another driver yet besides the Aug23 blockchain driver. Have you? Trying to compare notes to see what else to test to try and get them hashing. I've spent WAY to much time on get more that 1 Vega GPU working...
I'm running 2x Vega FE. The public drivers I've run are Vega FE release drivers, Vega FE beta(public) and the aug. 23 block chain drivers.
I got both cards up to 42.4Mh/s last night. Windows updated and restarted the computer and I can't get them past 36mh/s now. Very frustrating.
Windows update usually installs newest GPU drivers. So just uninstall your drivers with DDU in safe mode, reinstall proper drivers, and disable windows update.
September 08, 2017, 03:43:22 PM
Gigabyte Nvidia Geforce GTX 1050 Ti 4GB
clock: +100
mem: +1000
power: 80
-
temp 60-64 celsius
fan 40-50 % (silent)
13.0 - 13.9 MH / S
pictures:
http://www.budafox.com/gpu.gif
http://budafox.com/amao.jpg
clock: +100
mem: +1000
power: 80
-
temp 60-64 celsius
fan 40-50 % (silent)
13.0 - 13.9 MH / S
pictures:
http://www.budafox.com/gpu.gif
http://budafox.com/amao.jpg
September 08, 2017, 03:43:01 PM
i installed this driver
Win10-64Bit-Crimson-ReLive-Beta-Blockchain-Workloads-Aug23
but in device manager no drivers and when i tried start miner miner also saying no amd gpu
how to fix it?
and should i install AMD ReLive also for mining
Win10-64Bit-Crimson-ReLive-Beta-Blockchain-Workloads-Aug23
but in device manager no drivers and when i tried start miner miner also saying no amd gpu
how to fix it?
and should i install AMD ReLive also for mining
Did you run the pixel patcher, needed if gpu bios has been flashed (and maybe if using latest Blockchain drivers - I'm not sure).
https://www.monitortests.com/forum/Thread-AMD-ATI-Pixel-Clock-Patcher
"1.4.4: Added patch for BIOS signature check."
September 08, 2017, 03:24:24 PM
I tried plugging pcie riser to pci slot and killed my rx 480 8gb ( /slitwrists
( /slitwristsnot sure I understand what you did...maybe you just killed the pcie slot on the motherboard ? try your GPU in another computer !
No. I plugged a PCIE riser 1x to 16x, the 1x connector in to a PCI slot (different than pci express) they do fit in there the same. When I powered on the pc, smoke started coming out of the pci slot so I pulled it out quickly but it was too late. The damage was done. Ive tried connecting it to a pcie slot on to different pc's and both are unable to recognize the graphic card. Either in device manager or amd driver download. Error 175 or 182 on amd code.
burned card can be replaced.. i did it 2 times
September 08, 2017, 03:08:30 PM
I tried plugging pcie riser to pci slot and killed my rx 480 8gb ( /slitwrists
( /slitwristsnot sure I understand what you did...maybe you just killed the pcie slot on the motherboard ? try your GPU in another computer !
No. I plugged a PCIE riser 1x to 16x, the 1x connector in to a PCI slot (different than pci express) they do fit in there the same. When I powered on the pc, smoke started coming out of the pci slot so I pulled it out quickly but it was too late. The damage was done. Ive tried connecting it to a pcie slot on to different pc's and both are unable to recognize the graphic card. Either in device manager or amd driver download. Error 175 or 182 on amd code.
September 08, 2017, 02:40:27 PM
I tried plugging pcie riser to pci slot and killed my rx 480 8gb ( /slitwrists
( /slitwristsThat's an expensive lesson to learn. PCI-E and PCI slots are NOT the same! Sorry.
its stupid that pcie can even fit in to a PCI slot. I'm surprised more ppl aren't making the same mistake!
September 08, 2017, 01:54:12 PM
I don't know if it is specific to me, but I also have issues installing drivers in win10 for vega. I get one driver installation, after that something always goes wrong and I have to reinstall windows.
Awesome it's not just me. I have the same issue's that I get 1 installed fine anything after that it's a 50/50 chance that the driver installs correctly for the other 9 Vega gpu's. I haven't tried another driver yet besides the Aug23 blockchain driver. Have you? Trying to compare notes to see what else to test to try and get them hashing. I've spent WAY to much time on get more that 1 Vega GPU working...
I'm running 2x Vega FE. The public drivers I've run are Vega FE release drivers, Vega FE beta(public) and the aug. 23 block chain drivers.
I got both cards up to 42.4Mh/s last night. Windows updated and restarted the computer and I can't get them past 36mh/s now. Very frustrating.
I agree... well I will attempt to get 10 going again tonight possibly and will try the latest drivers instead of the blockchain drivers to see if that may potentially fix the issue.
September 08, 2017, 01:48:11 PM
I tried plugging pcie riser to pci slot and killed my rx 480 8gb ( /slitwrists
( /slitwristsThat's an expensive lesson to learn. PCI-E and PCI slots are NOT the same! Sorry.
September 08, 2017, 01:46:04 PM
I tried plugging pcie riser to pci slot and killed my rx 480 8gb ( /slitwrists
( /slitwristsnot sure I understand what you did...maybe you just killed the pcie slot on the motherboard ? try your GPU in another computer !
Jump to: