Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 616. (Read 6590565 times)

It depends on the card what seting gives the best result. The default value is 8. Only way to know is to add it and try different values.

Hello Vann, this setting is not specified actually in my bat, do you think it can be change something if i had it?

It's the ETH instensity. The command line options are listed in the readme and the OP.

Windows 10 v1703
8 RX 580 Gaming-X 8GB (Hynix)
Asus Prime Z270 P
Claymore 9.8

In june with my rig i got 240 MH/s to 242 MH/s, i change nothing and now, 3 month later the MH/s drop 230 MH/s, i tried aug 23 blockchain driver, the result, i got 248 MH/s, but unfortunately i met issue with stabilty not good.
On this topic I read this "It should be higher. Try increasing the -ethi to 8. My eight card mixed RX 570/570 4GB/8GB rig is getting 28.5 to almost 30 MH/s dual mining UBQ."

What is this setting? -ethi to 8

Recently bios modded two 4g rx 470's and afterburner adjustments. They both run at 27 mh/s but a couple times a saw them both, at the same time go up to 28.5 for a minute. Is something holding them back from staying at 28.5?

There is nothing that will work with win 7 in combination with the new block chain driver. it has an issue under windows 7 if you want to use it you will need windows 10
Your only solution is to mine another Ethash coin that is on a lower dag

So, i readed much posts and i am confused little, is latest claymore miner works with win7 blockchain drivers or what is best to use to have back results on our RX 400/500 models back to 30mh/s ?
I know there was much argue about that but there was also much incorrect answers so what is final conclusion, because i refuse to use win10, only win7.
What must be used to work with undervolt and etc?

I tested the blockchain drivers on one of rigs when they first came out but the increase of MH/s compared to increased wattage made it not worth it me.

I am very excited about V10.0! I spent about 8 hours last time trying to get the last drivers to work and lost a lot of hashtime.

I have a few questions.

Does the -cvddc and -mvddc commands work for the RX5xx series cards? I noticed in the readme from the correct versions and many of the past versions that this feature only works in the RX4xx series. Has the program been updated to work with the RX5xx series and this note is just outdated.

I have modified all of my BIOS myself with my limited understand and I hear people talking about setting the core clock, memory clock and voltages in the BIOS. I have a few questions about this.

For the core clock I assume that is under the GPU tab. This tab has a list of values which I assume to be the different states; should I be changing all the values except maybe the first one? or first 2? Does the last entry under GPU determine what the miner will use for clockspeed?

I thought I read somewhere that Claymore could use a high mV value from a previous state so I guess I should set them the same right? Should I also set all the GPU values the same? Except the first and possibly the second? Some clarification would be nice.

The same questions for memory clock. In the VBIOS there are usually only 3 fields; 300, 1000, 1750. Would I just change the 1750 value to what I want my memory clock speed to be?

Besides lowering the mV in the GPU and memory does it do any good to lower the amounts under POWERTUNE like TDP, TDC, Max Power Limit? What are the effects on Power Control Limit%?

Since I have had major problems with setting these commands in Claymore I thought it would be easier and save so much time to do all this in the BIOS.

On another note, the new blockchain driver raise the power usage of your cards alot. If your mod was tight you may have to change some things like power limit or max temp.

@claymore - Still have the issue even in 10. that If an instance of has more than 3 AMD cards I crash my Win 10 (I am running 7Nvidia 1070s and 5 AMD 580s (2 4mb 3 8mb)


What kind of logsdo we need to get?

I've changed Drivers.

I've reinstalled Windows.

I've rolled back Drivers and gone as far back to 9.4.

And ideas would be amazing I'd like to get allmy cards working again.

To the best of my limited knowledge the only difference between them is how much HBM2 they have.

1200W PSU is capable to draw 5-8% more from the wall up to 1300W comfortably.
This is what 92-95% efficiency means.

Somebody had noticed that when write "-erate" and "-estale" commands on start.bat the reported hashrate disappears on ethermine.org? I had to delete both commands and ethermine shows the reported hashrate again.

Thank you! 

What the heck... is it just me or there are no pages for beta 16 download. I went all the way through my download folder to find a link for AB beta 16 lol
Here you go buddy...when you open it just click on the refresh button and it will start to download.

http://office.guru3d.com/afterburner/MSIAfterburnerSetup440Beta16.rar

Can someone give me the link for afterburner beta 16 please?

don't know why wattman dont let me save changes I have win 10 and 3 cards, rx580,rx580 and rx480, I have another rig with is working fine, and another more wich one the gpu hung so i switch over before claymore, but in this rig 1, wattman don't save any change it I is a mistery, I'm using thw attman from the blockchain driver amd radeon

AFAIK, the Vega FE is a Workstation card that uses a different 'HBC' memory caching system, intended to work with large files in memory compared to the gaming cards which are optimized to produce the highest frame rates. The underlying architecture may be the same, but they are definitely not the same cards. Which is also why the Workstation cards cost almost double what the Vega gaming do.

https://pro.radeon.com/en-us/product/radeon-vega-frontier-edition

Plenty of people here have Vega 64. I encourage you to search and check other threads.
Cards are very heat sensitive. Running ETH only right now, I hit between 39-40 mh/s when cards are around 63c using drivers 17.8.2

Those numbers have been posted a number of times already.

I'm running vega FE (essentially RX Vega 64) and I can hold a constant 42.1Mh/s if weather permits.  My house is over 45C inside right now, so i've got mine turned down to keep temps in check.