Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 670.

H0RNET

newbie

Activity: 7

Merit: 0

Quote from: S1lent on August 16, 2017, 08:15:01 AM

Hello guys,

I'm new to the ethermining community, trying to read everything and get it to work by myself. If I read through the topics and see those logs, I see I have a much different screen than all of you guys.

First my miner restarted itself because of my 2nd gpu, but disabling got the miner to run. But I only get the following lines:

ETH: 08/16/17-14:12:39 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 19.296 Mh/s, Total Shares: 3, Rejected: 0, Time: 00:09
ETH: GPU0 19.296 Mh/s, GPU1 off
ETH: 08/16/17-14:12:41 - SHARE FOUND - (GPU 0)
ETH: Share accepted (31 ms)!

This keeps repeating over and over.

Nothing else is basically happening. The GPU seems to work, but I'm not sure if what is happening is good, or that I did something wrong and that nothing is actually happening.

Sorry for my incompetence, don't slaughter me

try -r 0 -di 0

S1lent

newbie

Activity: 2

Merit: 0

Hello guys,

I'm new to the ethermining community, trying to read everything and get it to work by myself. If I read through the topics and see those logs, I see I have a much different screen than all of you guys.

First my miner restarted itself because of my 2nd gpu, but disabling got the miner to run. But I only get the following lines:

ETH: 08/16/17-14:12:39 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 19.296 Mh/s, Total Shares: 3, Rejected: 0, Time: 00:09
ETH: GPU0 19.296 Mh/s, GPU1 off
ETH: 08/16/17-14:12:41 - SHARE FOUND - (GPU 0)
ETH: Share accepted (31 ms)!

This keeps repeating over and over.

Nothing else is basically happening. The GPU seems to work, but I'm not sure if what is happening is good, or that I did something wrong and that nothing is actually happening.

Sorry for my incompetence, don't slaughter me

InfinyTank

newbie

Activity: 25

Merit: 0

Hi all! Please give advice! I am trying to enjoy my rig as this is my computer too for almost everything, at least until I don't buy another one. I have 4x Rx580, but I would like to be able to watch movies/videos on my main card. I have tried "-ethi" parameter on this card, but it seems it doesn't work, or maybe I have added it incorrectly, in my command line for this I have set -ethi 5,8,8,8 as 8 is the maximum ether mining intensity and I lowered the first card. It looks nice, but in reality does not work. I wouldn't like to turn off the card completely with pressing "0". Please help!

okiagr

newbie

Activity: 10

Merit: 0

AMD Blockchain driver + Claymore 9.8
Gigabyte RX 580 moded

- setting a target temperature value: if the temp is higher, the fan speed is increased but does not decrease when the temp lowers. For other cards in the temp limit, fans are constant
- voltage in bat file not working
- clock speed triggers fluctuation: it goes to 2100 (or whatever set) and back to 1000 and so on. If not set, it works.

chronek

sr. member

Activity: 273

Merit: 250

BD People Are Legend

Quote from: StephdeLyon on August 16, 2017, 08:01:56 AM

put the stock GC bios or try on 3-4 cards ?

I lost original bios so can not try it, tryed on 3 cards - the same crash

StephdeLyon

newbie

Activity: 44

Merit: 0

Quote from: chronek on August 16, 2017, 07:46:32 AM

I changed for new amd official win7-crimson-relive-beta-blockchain-workloads-aug11 driver and patched with atimdag-patcher 1.4.5 (bios modded only mem straps),
Claymore 9.8 crashing at start (just after listing cards and "POLO/SOLO version" caption). It crash with stock settings or changed with OverdriveNTool 0.1.3....

Have anyone similar problem? Is that driver problem, claymore problem, other problem? was working before - 5x rx480, win7 x64

same problem for me but stock cards, same driver 17.7.2, no overclocking
ok on 3 cards , but crashes with 4 at the same moment.

don't know why...

put the stock GC bios or try on 3-4 cards ?

chronek

sr. member

Activity: 273

Merit: 250

BD People Are Legend

I changed for new amd official win7-crimson-relive-beta-blockchain-workloads-aug11 driver and patched with atimdag-patcher 1.4.5 (bios modded only mem straps),
Claymore 9.8 crashing at start (just after listing cards and "POLO/SOLO version" caption, in log after "start building OpenCL program for GPU 0..").
It crash with stock settings or changed with OverdriveNTool 0.1.3....

Have anyone similar problem? Is that driver problem, claymore problem, other problem? was working before - 5x rx480, win7 x64

cdrx

full member

Activity: 441

Merit: 109

Some say it works, some say is not working with RX 580s. Do you mean unofficial DAG fix or B*eta for Blo*chain C*ompute ?

yuslav

member

Activity: 112

Merit: 10

Quote from: cdrx on August 16, 2017, 07:01:40 AM

Claymore 9.8
AMD Driver 17.7.2

3x Gigabyte RX 580 Gaming 8 GB

When changing from mining to devfee mining -if I am mining other DAG than devfee DAG I am having problems when dev finishes mining as Wattman settings (voltage) and hashrate is changed - my card starts to consume same power as it would not be undervolted... Am I the only one with this issue ? I finally managed to have stable settings 1150 2150 900 or 950 and not working because of devfee mining... Undecided

Why 17.7.2?

New drivers

StephdeLyon

newbie

Activity: 44

Merit: 0

Quote from: TechPark on August 16, 2017, 05:36:07 AM

Quote from: StephdeLyon on August 16, 2017, 03:09:56 AM

Quote from: StephdeLyon on August 16, 2017, 02:46:15 AM

Quote from: TechPark on August 15, 2017, 06:52:47 PM

Quote from: StephdeLyon on August 15, 2017, 01:57:15 PM

hello
i have a big problem with the last version and all over miners. works with 3 cards and when i want to put 4 gpu cards on my rig, it crashes...
all the same cards, Under win10 fresh installed, AMD driver 17.4.4, stock cards, psu 1200w seasonic prime on asrock H81 rev2

risers are ok because:
- gpu 1+2+3 => ok
- gpu 1+2+4 => ok
- gpu 1+2+3+4 => ko...

claymore start well and detect the 4 gpu's but crashed before to start mining, just after GPU detect.

please help me !!

- Make sure the card is not sharing power with another card
- Make sure each riser not sharing its power with another riser
- Run all cards on stock BIOS and stock seetings
- Uninstall MSI AB or similar software
- Run DDU in safe mode
- Reinstall AMD driver, the latest
- Run Claymore with minimal settings -cvdcc 1000 -mvdcc 1500

Share results and screenshots from GPU-Z

hello,
i did everything and its still the same problem... im running now Under 4 cards and it's crashing.
Under GPUZ i don't see any problem and all the cards are detected. no time to post screenshots for the moment.
any idea ?

i put under 2 cards, i've got another problem about drivers, perhaps it's my problem, with 2 cards, on pciexpress 1 and 2,
one cards is Under Crimson 17.7.2 / whql /win10 64 drivers (opencl ticked)
and the second one is only whql / win10 64 drivers (opencl not ticked)

Did you run DDU? be honest...

of course i did it !
i had to go to my job this morning, not enought time sorry.
here is the screenshot with one card, it seem that there an exclamation behind my card. Conflict between windows drivers and AMD driver ??
do i have to use DDU each time i add a card and re install crimson AMD drivers 17.7.2 ?
https://www.noelshack.com/2017-33-3-1502867786-capture.png

i tried to use simplemining and it does not work well at all... only 10mhs with 3 cards and gpu core often low at 300 instead of 1236, really strange.

cdrx

full member

Activity: 441

Merit: 109

Claymore 9.8
AMD Driver 17.7.2

3x Gigabyte RX 580 Gaming 8 GB

When changing from mining to devfee mining -if I am mining other DAG than devfee DAG I am having problems when dev finishes mining as Wattman settings (voltage) and hashrate is changed - my card starts to consume same power as it would not be undervolted... Am I the only one with this issue ? I finally managed to have stable settings 1150 2150 900 or 950 and not working because of devfee mining... Undecided

Wicard

newbie

Activity: 54

Merit: 0

Quote from: Vann on August 15, 2017, 10:44:17 PM

Quote from: Call_Me_Bambi on August 15, 2017, 10:39:09 PM

Quote from: Tuca on August 15, 2017, 10:13:57 PM

Quote from: Call_Me_Bambi on August 15, 2017, 09:39:28 PM

I've tried out the new official beta drivers on a small test rig, there was no need to apply the 'atikmdag-patcher' patch.
With 17.7.1 drivers I get 59Mh/s with beta drivers I get 61Mh/s.

http://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-Beta-for-[Suspicious link removed]pute-Release-Notes.aspx

Does msi afterburner works with this driver?

Afterburner 440beta12 did not work, but it has not worked before and took a bit of tweaking to get it work. It's getting late - or should I say early - and dont have the energy right now to mess with it more, will play around with it a bit later on.

You have to use Afterburner beta 16 with the new drivers.

http://forums.guru3d.com/showpost.php?p=5459908&postcount=637

Hi All,

I have installed the new beta driver and Afterburner beta 16 and found the following,

Using Claymore 9.8 gave me a hell of high wattages use, so I have opt back to 9.7 to try and it's better on wattage use.

I'm mining ETC and with the DAG @ 143 I had 52.2 MH on 2 x RX480 Sapphire after install of beta drivers I have 59-60.1 MH

Thanks claymore for your great work on this miner.

yuslav

member

Activity: 112

Merit: 10

Quote from: Tuca on August 15, 2017, 10:13:57 PM

Does msi afterburner works with this driver?

preferably OverdriveNtool

Shaggy888

newbie

Activity: 33

Merit: 0

Quote from: TechPark on August 16, 2017, 05:38:02 AM

Quote from: Shaggy888 on August 16, 2017, 03:36:34 AM

I have been reading this forum a lot lately and thought I would join the community.

I have installed the new BETA drivers on my 7 GPU rig (mix of RX 480's/580's 4gb/8gb) and have seen a noticeable improvement. Went from 172Mh/s to 184Mh/s
I have to use WattMan and Afterburner combined to reduce volts and underclock/overclock - anyone have any better suggestions? (WattMan is a nightmare!!)

I have also noticed slight erratic behavior at first with these new drivers, a card or 2 would dip and then come back - perhaps teething issues as it appears to be running a bit more consistently now.

Claymore - Keep up the good work man!

Which link did you use to install the driver?
What is the driver number in Device manager?
Run DDU and reinstall the driver.
You do not have to install AMD settings and use Wattman at all.
MSI AB does that all...

I used the link below:
http://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-Beta-for-[Suspicious link removed]pute-Release-Notes.aspx
Driver number in device manager shows as 22.19.659.0 with date 08.08.2017
Thanks, I will try using DDU and do a clean install of the drivers soon and see if it helps with MSI AB, the clock options are grayed out also with the 4.4.0 beta version - for now the rig seems to be running smoothly so will avoid poking at it for now.

Edit: Seems the link gets broken when I paste, but was the one from a page or 2 ago.

Call_Me_Bambi

sr. member

Activity: 574

Merit: 261

Quote from: TechPark on August 15, 2017, 10:34:52 PM

Quote from: Call_Me_Bambi on August 15, 2017, 09:39:28 PM

I've tried out the new official beta drivers on a small test rig, there was no need to apply the 'atikmdag-patcher' patch.
With 17.7.1 drivers I get 59Mh/s with beta drivers I get 61Mh/s.

http://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-Beta-for-Blockchain-Compute-Release-Notes.aspx

What are your cards?

Three cards in this rig RX580 , RX480 and a R9 270x. The RX580 & RX480 have modded BIOS.

Funny thing though, tried the new beta driver in one of my 6 card rigs, a mix of RX480's & RX580's with moded BIOS, after beta driver installation all but one card was seen by Catalyst/Claymore - running the 'atikmdag-patcher' made the 6th card visible, but there was absolutely no change in hashrate ?

Edit: Hashrate before beta drivers installed 156Mh/s, hashrate after beta drivers installed 156Mh/s.

TechPark

full member

Activity: 238

Merit: 100

Quote from: Shaggy888 on August 16, 2017, 03:36:34 AM

I have been reading this forum a lot lately and thought I would join the community.

I have installed the new BETA drivers on my 7 GPU rig (mix of RX 480's/580's 4gb/8gb) and have seen a noticeable improvement. Went from 172Mh/s to 184Mh/s
I have to use WattMan and Afterburner combined to reduce volts and underclock/overclock - anyone have any better suggestions? (WattMan is a nightmare!!)

I have also noticed slight erratic behavior at first with these new drivers, a card or 2 would dip and then come back - perhaps teething issues as it appears to be running a bit more consistently now.

Claymore - Keep up the good work man!

Which link did you use to install the driver?
What is the driver number in Device manager?
Run DDU and reinstall the driver.
You do not have to install AMD settings and use Wattman at all.
MSI AB does that all...

TechPark

full member

Activity: 238

Merit: 100

Quote from: StephdeLyon on August 16, 2017, 03:09:56 AM

Quote from: StephdeLyon on August 16, 2017, 02:46:15 AM

Quote from: TechPark on August 15, 2017, 06:52:47 PM

Quote from: StephdeLyon on August 15, 2017, 01:57:15 PM

hello
i have a big problem with the last version and all over miners. works with 3 cards and when i want to put 4 gpu cards on my rig, it crashes...
all the same cards, Under win10 fresh installed, AMD driver 17.4.4, stock cards, psu 1200w seasonic prime on asrock H81 rev2

risers are ok because:
- gpu 1+2+3 => ok
- gpu 1+2+4 => ok
- gpu 1+2+3+4 => ko...

claymore start well and detect the 4 gpu's but crashed before to start mining, just after GPU detect.

please help me !!

- Make sure the card is not sharing power with another card
- Make sure each riser not sharing its power with another riser
- Run all cards on stock BIOS and stock seetings
- Uninstall MSI AB or similar software
- Run DDU in safe mode
- Reinstall AMD driver, the latest
- Run Claymore with minimal settings -cvdcc 1000 -mvdcc 1500

Share results and screenshots from GPU-Z

hello,
i did everything and its still the same problem... im running now Under 4 cards and it's crashing.
Under GPUZ i don't see any problem and all the cards are detected. no time to post screenshots for the moment.
any idea ?

i put under 2 cards, i've got another problem about drivers, perhaps it's my problem, with 2 cards, on pciexpress 1 and 2,
one cards is Under Crimson 17.7.2 / whql /win10 64 drivers (opencl ticked)
and the second one is only whql / win10 64 drivers (opencl not ticked)

Did you run DDU? be honest...

TechPark

full member

Activity: 238

Merit: 100

Quote from: ?? on ??

Quote from: Mapuo on August 16, 2017, 02:31:39 AM

Does the undervolt via bat file work with official amd beta?

Undervolt does not seem to work with these latest AMD Beta Drivers and laters Claymore v9.8

We need a quick hot fix from Claymore.

Is there any way to officially report bugs ?

It works fine with AB beta. Read a few pages back....

TechPark

full member

Activity: 238

Merit: 100

Quote from: StephdeLyon on August 16, 2017, 02:46:15 AM

Quote from: TechPark on August 15, 2017, 06:52:47 PM

Quote from: StephdeLyon on August 15, 2017, 01:57:15 PM

hello
i have a big problem with the last version and all over miners. works with 3 cards and when i want to put 4 gpu cards on my rig, it crashes...
all the same cards, Under win10 fresh installed, AMD driver 17.4.4, stock cards, psu 1200w seasonic prime on asrock H81 rev2

risers are ok because:
- gpu 1+2+3 => ok
- gpu 1+2+4 => ok
- gpu 1+2+3+4 => ko...

claymore start well and detect the 4 gpu's but crashed before to start mining, just after GPU detect.

please help me !!

- Make sure the card is not sharing power with another card
- Make sure each riser not sharing its power with another riser
- Run all cards on stock BIOS and stock seetings
- Uninstall MSI AB or similar software
- Run DDU in safe mode
- Reinstall AMD driver, the latest
- Run Claymore with minimal settings -cvdcc 1000 -mvdcc 1500

Share results and screenshots from GPU-Z

hello,
i did everything and its still the same problem... im running now Under 4 cards and it's crashing.
Under GPUZ i don't see any problem and all the cards are detected. no time to post screenshots for the moment.
any idea ?

No time for screenshots? It does not take time at all...
What does take time is thinking about your problem and coming up with a solution with very limited information....

kkourmousis

member

Activity: 119

Merit: 10

Quote from: Shaggy888 on August 16, 2017, 03:36:34 AM

I have been reading this forum a lot lately and thought I would join the community.

I have installed the new BETA drivers on my 7 GPU rig (mix of RX 480's/580's 4gb/8gb) and have seen a noticeable improvement. Went from 172Mh/s to 184Mh/s
I have to use WattMan and Afterburner combined to reduce volts and underclock/overclock - anyone have any better suggestions? (WattMan is a nightmare!!)

I have also noticed slight erratic behavior at first with these new drivers, a card or 2 would dip and then come back - perhaps teething issues as it appears to be running a bit more consistently now.

Claymore - Keep up the good work man!

Thanks for the heads up

Can you tell us if you are able to undervolt/overclock via Claymore's Dual Miner directly (through input parameters in the bat file) ?
In the beta driver's description it says
This driver is not intended for graphics or gaming workloads
Can you tell us anything on this? Try watching some porn or something

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 670. (Read 6590565 times)