Can i dual mine zec+ Ethereum with 1060 cards?
No.
Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 722. (Read 6590565 times)
July 26, 2017, 04:57:37 AM
July 26, 2017, 03:34:14 AM
Can i dual mine zec+ Ethereum with 1060 cards?
July 26, 2017, 01:39:51 AM
Quote
Terry Makedon @CatalystMaker
I sense a BIG day for Radeon Software tomorrow. Cant wait to let the cat out of the bag......
https://twitter.com/CatalystMaker/status/889946633575780352I sense a BIG day for Radeon Software tomorrow. Cant wait to let the cat out of the bag......
Lets all hope its a DAG fix
https://www.techrival.com/amd-radeon-software-17-7-2-brings-enhanced-sync/
July 26, 2017, 01:25:25 AM
I am dual mining on nanopool.. My primary server is US west (eth-us-west1.nanopool.org).. I get the below error once in a while..
Socket was closed remotely (by pool) ETH: Job timeout, disconnect, retry in 20 sec...
I tried restarting the router/modem.. Disconnected and reconnected the ethernet cable.. Nothing worked.. Tried switching the server to US east (eth-us-east1.nanopool.org) in the batch file and that worked.. Is there a way to specify a secondary server or something in the batch file? So claymore can automatically switch to other one if it keeps receiving the socket error?? Possible??
Socket was closed remotely (by pool) ETH: Job timeout, disconnect, retry in 20 sec...
I tried restarting the router/modem.. Disconnected and reconnected the ethernet cable.. Nothing worked.. Tried switching the server to US east (eth-us-east1.nanopool.org) in the batch file and that worked.. Is there a way to specify a secondary server or something in the batch file? So claymore can automatically switch to other one if it keeps receiving the socket error?? Possible??
July 25, 2017, 10:05:43 PM
Hi Mr Claymore,
I am using claymore miner as a 3rd party miner from nicehash. I have been using for a couple months.
However, This morning from ~1.45AM to ~4.15AM my mining work was 0 from all of my rigs. but all rigs was running ok.
seems like my wallet has been replaced temporarily for 2.5hrs, then reverted back.
I had suspicion that i had been hacked, then i remember clymore miner got management port enabled by default.
i know how to disable it, if it is used by command prompt. but clueless if it is run from nicehash GUI.
I already searched possible options from nicehash gui for disabling management port, extra launch param didnt work for me.
please help!
===Martin
I am using claymore miner as a 3rd party miner from nicehash. I have been using for a couple months.
However, This morning from ~1.45AM to ~4.15AM my mining work was 0 from all of my rigs. but all rigs was running ok.
seems like my wallet has been replaced temporarily for 2.5hrs, then reverted back.
I had suspicion that i had been hacked, then i remember clymore miner got management port enabled by default.
i know how to disable it, if it is used by command prompt. but clueless if it is run from nicehash GUI.
I already searched possible options from nicehash gui for disabling management port, extra launch param didnt work for me.
please help!
===Martin
You were hacked, as many other users I think. This morning on ethpool i saw few very suspicious miners
One of them was at 561 GH/s in one moment, mining block every 30 minutes. Other was on 300 GH/s ... few are still active I think, you can check this two :http://ethpool.org/miners/faf37383b55051e2e4c6835d58c7048637838420
http://ethpool.org/miners/97606dc346e7a23ebab1ddbcf6b50ee7b9bdd0cf
thanks for replying, i think i might have temporary solution for the time being, i switched off UPnP in my router so that nothing get fwd-ed to my rigs.
but i want to turn off management port completely off just to be sure.
===Martin
July 25, 2017, 09:55:36 PM
Hi all,
Please can you help me with this? I want to enable mixed GPU (Nvidia+AMD) mining in Claymore's.
Currently my rig setup is single GPU GTX 1070 (asus strix 08g).
I just bought a Sapphire RX 580 8GB to add on to my existing rig, for obvious reason RX580 is way cheaper in my country.
1. Should I create 2 start.bat files as if 2 miners, 1 for AMD and 1 for Nvidia? both will point to the same pool, same wallet
2. Or there is single line command line that can handle both mix brands (AMD Nvidia) GPU together? Can you show me the command line example? I read the Claymore's readme file but didn't see any options for it for mixed GPU.
Please can you help me with this? I want to enable mixed GPU (Nvidia+AMD) mining in Claymore's.
Currently my rig setup is single GPU GTX 1070 (asus strix 08g).
I just bought a Sapphire RX 580 8GB to add on to my existing rig, for obvious reason RX580 is way cheaper in my country.
1. Should I create 2 start.bat files as if 2 miners, 1 for AMD and 1 for Nvidia? both will point to the same pool, same wallet
2. Or there is single line command line that can handle both mix brands (AMD Nvidia) GPU together? Can you show me the command line example? I read the Claymore's readme file but didn't see any options for it for mixed GPU.
July 25, 2017, 08:39:06 PM
Quote
Terry Makedon @CatalystMaker
I sense a BIG day for Radeon Software tomorrow. Cant wait to let the cat out of the bag......
https://twitter.com/CatalystMaker/status/889946633575780352I sense a BIG day for Radeon Software tomorrow. Cant wait to let the cat out of the bag......
Lets all hope its a DAG fix
July 25, 2017, 07:30:54 PM
Is anyone using WebRoot's SecureAnywhere with Claymore's miner? Any time I try to run the miner with SecureAnywhere enabled after a certain amount of time execution stops, but if I completely disable SecureAnywhere the miner is able to run without issue. Now, I'd rather not have to disable my security software in order to be able to mine. I have added the ethdcrminer64.exe file in the main directory, the cuda7.5 directory and the cuda 6.5 directory to the exclude list, but the issue is still happening.
Does anyone have any suggestions, or am I stuck?
-Madrak
Does anyone have any suggestions, or am I stuck?
-Madrak
I haven't used SecureAnywhere for a little bit since my version expired and they wanted too much for renewals.
However, I used to use it and setup an exclusion. I excluded a whole folder like c:\claymore or whatever. I put all my claymore versions in sub folders under that. So I never had to worry about creating new exclusions.
I just got off the phone with their technical support, they weren't able to fix the issue, but did grab a snapshot of my system and extensive logs for review, so hopefully they will be able to find something. There is no way to exclude a whole directory anymore in the software and I'm not looking forward to the idea of excluding every file by hand. Hopefully they come up with something from the logs.
July 25, 2017, 05:58:09 PM
i`m testing smos and have a prop with overclocking
i`ve 1050 ti gpu
the problem is when i make a change on the website the miner repot to applay changes and it`s writing my oc settings
but the hash rate never changes
on windows the default hashrate is 11.5 - after over clock 13
on smos it`s only 11.5 and never changes
i downloaded the system 14-7-2017
with file name : simpleminer-NV-v1103-kernel4.11.4-nvidia375.66-i915fw.imgc
can some one help??
i`ve 1050 ti gpu
the problem is when i make a change on the website the miner repot to applay changes and it`s writing my oc settings
but the hash rate never changes
on windows the default hashrate is 11.5 - after over clock 13
on smos it`s only 11.5 and never changes
i downloaded the system 14-7-2017
with file name : simpleminer-NV-v1103-kernel4.11.4-nvidia375.66-i915fw.imgc
can some one help??
July 25, 2017, 04:40:57 PM
I have a 6GB HD 7970 GHz Edition, which claymore miner is only recognizing as a 3GB card. Is that slowing down my hashrate? Will it be a problem as the DAG increases? Finally, I’m on Windows, would the miner on Linux recognize the card correctly?
That 6GB HD 7970 is a rare gem. Sell it on eBay, they are fetching a huge penny.
But mine ZEC instead with your 7970, ETH no good for your GPU.
That is right. All my 7970/7950 are on ZEC now.
I’ll probably mine some more ETH until I have the minimum to withdraw from the pool and I’ll then try to mine some ZEC.
I also got 2 gtx 970s for pretty cheap, I guess ZEC will also be better for those
July 25, 2017, 03:50:48 PM
I hope nobody bought GTX 1080's or GTX 1080 TI's for mining and resale on 2nd hand market.
Rumours are that RX Vega is going to be very cheap, like Ryzen CPUs.
Gaming performance above GTX 1080.
Source:
https://www.youtube.com/watch?v=oKOwl-bZ-Yw
Rumours are that RX Vega is going to be very cheap, like Ryzen CPUs.
Gaming performance above GTX 1080.
Source:
https://www.youtube.com/watch?v=oKOwl-bZ-Yw
Not to mention Vega has some serious mining potential. Today peak hash rate went to a new high for me of 52.2MH/second. I don't have a 24hr average yet for the new settings I'm running.
If it's true that later model Vegas will get even faster HBM2, they'll be insane mining cards.
Glad, I waited now. They are saying it might be under $450!
Once, Claymore does the optimisations and with some bios tinkering: you could be looking at 60mhs GPU.
July 25, 2017, 03:48:01 PM
When dual mining (ETH and SIA), pressing 0 on keyboard will disable mining on GPU0.. Pressng 0 again enables mining on ETH only.. Sia mining does not get enabled.. Is there a seperate key for that?
July 25, 2017, 03:31:58 PM
been running 7 cards on the system for a while now. i just added the 8th card to it finally, and looks like the rig is not responding to certain commands. also when i run the dual miner, i get this error:
http://imgur.com/a/kJWQa
followed by
http://imgur.com/a/K0yvx stating temp monitoring is disabled.
8 cards cant work on windows 10 pro?
http://imgur.com/a/kJWQa
followed by
http://imgur.com/a/K0yvx stating temp monitoring is disabled.
8 cards cant work on windows 10 pro?
July 25, 2017, 03:25:06 PM
I hope nobody bought GTX 1080's or GTX 1080 TI's for mining and resale on 2nd hand market.
Rumours are that RX Vega is going to be very cheap, like Ryzen CPUs.
Gaming performance above GTX 1080.
Source:
https://www.youtube.com/watch?v=oKOwl-bZ-Yw
Rumours are that RX Vega is going to be very cheap, like Ryzen CPUs.
Gaming performance above GTX 1080.
Source:
https://www.youtube.com/watch?v=oKOwl-bZ-Yw
Not to mention Vega has some serious mining potential. Today peak hash rate went to a new high for me of 52.2MH/second. I don't have a 24hr average yet for the new settings I'm running.
If it's true that later model Vegas will get even faster HBM2, they'll be insane mining cards.
July 25, 2017, 03:10:27 PM
I hope nobody bought GTX 1080's or GTX 1080 TI's for mining and resale on 2nd hand market.
Rumours are that RX Vega is going to be very cheap, like Ryzen CPUs.
Gaming performance above GTX 1080.
Source:
https://www.youtube.com/watch?v=oKOwl-bZ-Yw
Rumours are that RX Vega is going to be very cheap, like Ryzen CPUs.
Gaming performance above GTX 1080.
Source:
https://www.youtube.com/watch?v=oKOwl-bZ-Yw
July 25, 2017, 03:02:38 PM
Why does Google block download due to found virus?
It happens that miners get a false flag, just ignore it.
Probably because hackers install these miners on peoples computers without their knowledge.
Solution to this is placing your miner to ignore-list.
July 25, 2017, 01:49:11 PM
Why does Google block download due to found virus?
July 25, 2017, 12:49:34 PM
Claymore- I'm mining with Ubiq and noticed that when you're time came to mine for developer it could not connect to your pool. So the app would restart, just FYI.
hey just use -allcoins exp this will help.
July 25, 2017, 12:17:23 PM
Claymore- I'm mining with Ubiq and noticed that when you're time came to mine for developer it could not connect to your pool. So the app would restart, just FYI.
July 25, 2017, 11:47:23 AM
Hi Mr Claymore,
I am using claymore miner as a 3rd party miner from nicehash. I have been using for a couple months.
However, This morning from ~1.45AM to ~4.15AM my mining work was 0 from all of my rigs. but all rigs was running ok.
seems like my wallet has been replaced temporarily for 2.5hrs, then reverted back.
I had suspicion that i had been hacked, then i remember clymore miner got management port enabled by default.
i know how to disable it, if it is used by command prompt. but clueless if it is run from nicehash GUI.
I already searched possible options from nicehash gui for disabling management port, extra launch param didnt work for me.
please help!
===Martin
I am using claymore miner as a 3rd party miner from nicehash. I have been using for a couple months.
However, This morning from ~1.45AM to ~4.15AM my mining work was 0 from all of my rigs. but all rigs was running ok.
seems like my wallet has been replaced temporarily for 2.5hrs, then reverted back.
I had suspicion that i had been hacked, then i remember clymore miner got management port enabled by default.
i know how to disable it, if it is used by command prompt. but clueless if it is run from nicehash GUI.
I already searched possible options from nicehash gui for disabling management port, extra launch param didnt work for me.
please help!
===Martin
You were hacked, as many other users I think. This morning on ethpool i saw few very suspicious miners
One of them was at 561 GH/s in one moment, mining block every 30 minutes. Other was on 300 GH/s ... few are still active I think, you can check this two :http://ethpool.org/miners/faf37383b55051e2e4c6835d58c7048637838420
http://ethpool.org/miners/97606dc346e7a23ebab1ddbcf6b50ee7b9bdd0cf
Jump to: