Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 728. (Read 6590565 times)

Probably just due to Win7 for some reason. Wattman is there, in gaming mode in Win10 anyway. Gaming mode doesn't do anything now except get you wattman. You can also use wattool.  Memory speed gets set slow if you set all pstates, so just set last one. Bugs probably will be fixed upon RX Vega release.

I never did that.. I assumed its ok do flash while on riser.. And I add each GPU one by one and flash them and leave them on the slot.. So thats not a good practise? And there is no way to backup and flash the 5th card from atx flash? If there is no way, then I have to remove all other cards, boot to windows, flash the card, connect all cards back and I wouldnt have any card error or detection issues? Thanks

Trying to get my ubq and sia mining setup for last 6 hrs, wouldnt hash. Removed my solo mining address and moved back to ethermine pool address and eth wallet and I am back to hashing. Seems to be something w my solo mining server. The address in my ubiq bat ahould be my wallet address from my fusion wallet correct? What else cluld I be missing. My ip and port is correct.

I don't know how to play with the timing.

yeah but what was the wattage, even a 120 mv uundervolt on an RX 580 8GB only saves 30-40 watts

250 watts for 31 eth and 1600 SIA is garbage for a FE card that costs $900

I can get 37 mhs eth and 1300 SIA out of a gtx 1080 ti for 230 watts , and its a cheaper card

I'm noticing that the core clock is less important than the memory clock.

I'm a little nervous about how much voltage I can give the HMB2 though... These Vega FE's are the first GPU's I've every messed with voltage and clock settings.  I rarely overclock anything, but since I bought these cards to mine with and they represent 2/3 of my mining GPUs I want to get as much out of them as I can.  They're also all of my disposable income for the next year so I don't want to ruin them and risk getting turned down on a RMA.

Currently at

852MHz GPU Core clock (My profile is setup for 1347MHz as the high end, but the GPU won't go past 852)

Memory is 1125MHz @ 1125Mv

GPU temp is 68C, fan is at 2779 RPM (~>50%)

Genoil is reporting 25.95 - 31.15 MH/s, but not enough run time to cite ethermine.org values.

YES, DIFFERENT GPUS CAN MINE DIFFERENT COINS--

You will need to run different instances for the different cards. 

EXAMPLE:  (4 card rig, run 2 launch lines)

        1) Run Claymore for GPUs 1 and 2 for ETH + DCR

        2) Run Claymore for GPUs 3 and 4 for ETH + SC

Just follow the examples on the Opening Page (OP) and in the readme.  Specify the card numbers in each launch line.

It may take more CPU power.  I have not tried it.       --scryptr

my bat file : EthDcrMiner64.exe -epool asia.ethash-hub.miningpoolhub.com:17020 -ewal xxx.3 -eworker xxx.3 -esm 2 -epsw x -allpools 1 -dpool stratum+tcp://hub.miningpoolhub.com:20550 -dwal xxx.3 -dpsw x -dcoin sc

mr card : r9 390

os : win 7

memory : 20g~

I want use your program...
But i can not....

I have error....

help me......

b370
Platform: Windows
start building OpenCL program for GPU 0...
done
GPU #0: algorithm ASM
cudaGetDeviceCount failed (35, CUDA driver version is insufficient for CUDA runt
ime version), probably no CUDA devices
No NVIDIA CUDA GPUs detected.
Total cards: 1
No NVIDIA cards in the list, NVML library will not be used.
ETH: Stratum - connecting to 'asia.ethash-hub.miningpoolhub.com' <172.104.94.4>
port 17020
DUAL MINING MODE ENABLED: ETHEREUM+SIACOIN
 SC: Stratum - connecting to 'hub.miningpoolhub.com' <34.201.225.155> port 20550

ETH: miner-proxy stratum mode
"-allpools" option is set, default pools can be used for devfee, check "Readme"
file for details.
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333

send: {"id": 1, "method": "mining.subscribe", "params": []}

send: {"id": 5, "method": "mining.extranonce.subscribe", "params": []}

send: {"id": 2, "method": "mining.authorize", "params": ["freetofree.3","x"]}

ETH: Stratum - Connected (asia.ethash-hub.miningpoolhub.com:17020)
got 162 bytes
buf: {"id":1,"result":[[["mining.set_difficulty","deadbeefcafebabeca6c0200000000
00"],["mining.notify","deadbeefcafebabeca6c020000000000"]],"10026bab",4],"error"
:null}

parse packet: 161
new buf size: 0
send: {"id": 1, "method": "mining.subscribe", "params": []}

send: {"id": 5, "method": "mining.extranonce.subscribe", "params": []}

send: {"id": 2, "method": "mining.authorize", "params": ["freetofree.3","x"]}

 SC: Stratum - Connected (hub.miningpoolhub.com:20550)
got 456 bytes
buf: {"id":1,"result":[[["mining.set_difficulty","deadbeefcafebabe50500b00000000
00"],["mining.notify","deadbeefcafebabe50500b0000000000"]],"200b14c8",4],"error"
:null}
{"id":null,"method":"mining.notify","params":["1945","0x00000000000000418edec479
bcf1107a458294ca317e6957a32c29b4fb12edc10000000000000000e2f0735900000000a0f5bc5 e
4d3a52f44d6b61023b0524ae687864db4db0f50b4dbb3a664d00ce16","0x0000000012533fe68fd
3d1cfe47445abdce0b117994feb3fbbe16e3d0f675ad9",true]}

parse packet: 161
remove first packet 294
new buf size: 294
parse packet: 293
sc: job changed
new buf size: 0
got 36 bytes
buf: {"id":2,"result":true,"error":null}

parse packet: 35
 SC: Authorized
new buf size: 0
got 36 bytes
buf: {"id":2,"result":true,"error":null}

parse packet: 35
ETH: Authorized
new buf size: 0
got 267 bytes
buf: {"id":null,"method":"mining.notify","params":["9992","0xd7eb10643df92ec1f42
f41e4f1271d8ad30b8c27e7ffe6d39aad79416b790cb7","0x96fee1e50df8af3d9972983f531d26
41496992cb062856ee6639e68003b001e2","0x00000000ffb34c02420e9948eacd78cf33b059a88
ade1ff0614f7f3c303cf3a7",true]}

parse packet: 266
ETH: job changed
new buf size: 0
Setting DAG epoch #138...
got 267 bytes
buf: {"id":null,"method":"mining.notify","params":["9993","0xe063a646d7f598daeab
2c34fc0f181d20eb434766d3005b4af24ecc4286f8d9d","0x96fee1e50df8af3d9972983f531d26
41496992cb062856ee6639e68003b001e2","0x00000000ffb34c02420e9948eacd78cf33b059a88
ade1ff0614f7f3c303cf3a7",true]}

parse packet: 266
ETH: job changed
new buf size: 0
ETH: 07/23/17-09:42:19 - New job from asia.ethash-hub.miningpoolhub.com:17020
target: 0x00000000ffb34c02 (diff: 4300MH), epoch 138(2.08GB)
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s
 SC - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0
 SC: GPU0 0.000 Mh/s
Setting DAG epoch #138 for GPU0
Create GPU buffer for GPU0
got 267 bytes
buf: {"id":null,"method":"mining.notify","params":["9994","0xd9d0335a72fd9ddfa46
c6937a635442e3491347182e43c6e67d406c4e265f8a7","0x96fee1e50df8af3d9972983f531d26
41496992cb062856ee6639e68003b001e2","0x00000000ffb34c02420e9948eacd78cf33b059a88
ade1ff0614f7f3c303cf3a7",true]}

parse packet: 266
ETH: job changed
new buf size: 0
ETH: 07/23/17-09:42:24 - New job from asia.ethash-hub.miningpoolhub.com:17020
target: 0x00000000ffb34c02 (diff: 4300MH), epoch 138(2.08GB)
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s
 SC - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0
 SC: GPU0 0.000 Mh/s
GPU0 DAG creation time - 6315 ms
Setting DAG epoch #138 for GPU0 done
got 267 bytes
buf: {"id":null,"method":"mining.notify","params":["9995","0x52a9918a2ee66f2c3c8
d82ada54e0bda75ab317892a23cbef531e0265066fa96","0x96fee1e50df8af3d9972983f531d26
41496992cb062856ee6639e68003b001e2","0x00000000ffb34c02420e9948eacd78cf33b059a88
ade1ff0614f7f3c303cf3a7",true]}

parse packet: 266
ETH: job changed
new buf size: 0
ETH: 07/23/17-09:42:38 - New job from asia.ethash-hub.miningpoolhub.com:17020
target: 0x00000000ffb34c02 (diff: 4300MH), epoch 138(2.08GB)
ETH - Total Speed: 22.876 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 22.876 Mh/s
 SC - Total Speed: 686.274 Mh/s, Total Shares: 0, Rejected: 0
 SC: GPU0 686.274 Mh/s
send: {"id":6,"worker":"freetofree.3","jsonrpc":"2.0","method":"eth_submitHashra
te","params":["0x15d0e9d", "0x00000000000000000000000000000000000000000000000000
00000055ef1541"]}

got 36 bytes
buf: {"id":6,"result":true,"error":null}

parse packet: 35
new buf size: 0
SC: put share nonce 748055c enonce 30750058
SC round found 1 shares
 SC: 07/23/17-09:42:38 - SHARE FOUND - (GPU 0)
send: {"id": 4, "method": "mining.submit", "params": ["freetofree.3","1945","0x0
0000000000000418edec479bcf1107a458294ca317e6957a32c29b4fb12edc15c05480758007530 e
2f0735900000000a0f5bc5e4d3a52f44d6b61023b0524ae687864db4db0f50b4dbb3a664d00ce16"
]}

GPU0 t=66C fan=31%
em hbt: 0, dm hbt: 0, fm hbt: 16,
watchdog - thread 0 (gpu0), hb time 94
watchdog - thread 1 (gpu0), hb time 203
WATCHDOG: GPU error, you need to restart miner
Restarting OK, exit...


args: -epool asia.ethash-hub.miningpoolhub.com:17020 -ewal freetofree.3 -eworker
 freetofree.3 -esm 2 -epsw x -allpools 1 -dpool stratum+tcp://hub.miningpoolhub.
com:20550 -dwal freetofree.3 -dpsw x -dcoin sc

袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴敲
?     Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.7      ?
훤袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴袴暠

ETH: 1 pool is specified
Main Ethereum pool is asia.ethash-hub.miningpoolhub.com:17020
SC: 1 pool is specified
Main Siacoin pool is hub.miningpoolhub.com:20550
OpenCL platform: Intel(R) OpenCL
OpenCL platform: AMD Accelerated Parallel Processing

Catalyst 15.12 is REQUIRED for best performance and compatibility
For Polaris cards, use latest drivers
At least 16 GB of Virtual Memory is required for multi-GPU systems
Make sure you defined GPU_MAX_ALLOC_PERCENT 100
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload p
ools, "e" or "d" to select current pool
OpenCL initializing...

AMD Cards available: 1
GPU #0: Hawaii, 8192 MB available, 40 compute units
GPU #0 recognized as Radeon 390
POOL/SOLO version
b370
Platform: Windows
start building OpenCL program for GPU 0...
done
GPU #0: algorithm ASM
cudaGetDeviceCount failed (35, CUDA driver version is insufficient for CUDA runt
ime version), probably no CUDA devices
No NVIDIA CUDA GPUs detected.
Total cards: 1
No NVIDIA cards in the list, NVML library will not be used.
ETH: Stratum - connecting to 'asia.ethash-hub.miningpoolhub.com' <172.104.106.83
> port 17020
DUAL MINING MODE ENABLED: ETHEREUM+SIACOIN
 SC: Stratum - connecting to 'hub.miningpoolhub.com' <34.201.225.155> port 20550

ETH: miner-proxy stratum mode
"-allpools" option is set, default pools can be used for devfee, check "Readme"
file for details.
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333

send: {"id": 1, "method": "mining.subscribe", "params": []}

send: {"id": 5, "method": "mining.extranonce.subscribe", "params": []}

send: {"id": 2, "method": "mining.authorize", "params": ["freetofree.3","x"]}

ETH: Stratum - Connected (asia.ethash-hub.miningpoolhub.com:17020)
got 162 bytes
buf: {"id":1,"result":[[["mining.set_difficulty","deadbeefcafebabe357d0200000000
00"],["mining.notify","deadbeefcafebabe357d020000000000"]],"4ffd8402",4],"error"
:null}

parse packet: 161
new buf size: 0
send: {"id": 1, "method": "mining.subscribe", "params": []}

send: {"id": 5, "method": "mining.extranonce.subscribe", "params": []}

send: {"id": 2, "method": "mining.authorize", "params": ["freetofree.3","x"]}

 SC: Stratum - Connected (hub.miningpoolhub.com:20550)
got 456 bytes
buf: {"id":1,"result":[[["mining.set_difficulty","deadbeefcafebabe88500b00000000
00"],["mining.notify","deadbeefcafebabe88500b0000000000"]],"200b1500",4],"error"
:null}
{"id":null,"method":"mining.notify","params":["1945","0x00000000000000418edec479
bcf1107a458294ca317e6957a32c29b4fb12edc10000000000000000e2f0735900000000a0f5bc5 e
4d3a52f44d6b61023b0524ae687864db4db0f50b4dbb3a664d00ce16","0x0000000012533fe68fd
3d1cfe47445abdce0b117994feb3fbbe16e3d0f675ad9",true]}

parse packet: 161
remove first packet 294
new buf size: 294
parse packet: 293
sc: job changed
new buf size: 0
got 36 bytes
buf: {"id":2,"result":true,"error":null}

parse packet: 35
 SC: Authorized
new buf size: 0
got 36 bytes
buf: {"id":2,"result":true,"error":null}

parse packet: 35
ETH: Authorized
new buf size: 0
got 267 bytes
buf: {"id":null,"method":"mining.notify","params":["99db","0xf366949ae8dc410cada
b58946e01d520a28efd277c21cd321c76a2c9d7bf568b","0x96fee1e50df8af3d9972983f531d26
41496992cb062856ee6639e68003b001e2","0x00000000ffb34c02420e9948eacd78cf33b059a88
ade1ff0614f7f3c303cf3a7",true]}

parse packet: 266
ETH: job changed
new buf size: 0
Setting DAG epoch #138...
Setting DAG epoch #138 for GPU0
Create GPU buffer for GPU0
got 267 bytes
GPU0 DAG creation time - 6326 ms
got 294 bytes
buf: {"id":null,"method":"mining.notify","params":["1946","0x00000000000000418ed
ec479bcf1107a458294ca317e6957a32c29b4fb12edc1000000000000000019f173590000000041 e
6eea94478abcbd1315f6227b0fd37d2e190dca2f759810bacc5d9978c400c","0x0000000012533f
e68fd3d1cfe47445abdce0b117994feb3fbbe16e3d0f675ad9",true]}

buf: {"id":null,"method":"mining.notify","params":["99dc","0x1ffe86ae551b42813a0
8e21e31aa53be5dfd365793cbe815c708f593f2968870","0x96fee1e50df8af3d9972983f531d26
41496992cb062856ee6639e68003b001e2","0x00000000ffb34c02420e9948eacd78cf33b059a88
ade1ff0614f7f3c303cf3a7",true]}

parse packet: 293
Setting DAG epoch #138 for GPU0 done
parse packet: 266
sc: job changed(2)
new buf size: 0
ETH: job changed
new buf size: 0
ETH: 07/23/17-09:43:06 - New job from asia.ethash-hub.miningpoolhub.com:17020
 SC: 07/23/17-09:43:06 - New job from hub.miningpoolhub.com:20550
target: 0x0000000012533fe6 (diff: 60GH)
target: 0x00000000ffb34c02 (diff: 4300MH), epoch 138(2.08GB)
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s
 SC - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0
 SC: GPU0 0.000 Mh/s
send: {"id":6,"worker":"freetofree.3","jsonrpc":"2.0","method":"eth_submitHashra
te","params":["0x160d06a", "0x00000000000000000000000000000000000000000000000000
000000c79fb645"]}

got 36 bytes
buf: {"id":6,"result":true,"error":null}

parse packet: 35
new buf size: 0

@Claymore

Wattman only works in Win10.  I reluctantly made the upgrade to get the drivers.  Also, I've noticed something very interesting, Vega might be one of the most energy efficient GPUs for mining.  Someone like yourself might be better placed to prove that.

Last night I had both my Vega FE's running 852MHz core clock.  Memory was set at 1100MHz and 1050mV.  Reported hash rate was 31MH/s in genoil.  I didn't have them running long enough to get a 24hr average, but no invalid shares.

I had them turned up today, windows reset itself and they wouldn't go back to mem of 1100MHz with 852MHz core.  Fan speed was decent too, not at all annoying but I don't remember the percentage.  I'll be playing more tonight.

If I can be helpful to you in any way, let me know.

Never said you had to.  Just a precaution to avoid bricking your card with a bad flash.

Do you know if is related to how memory is addressed?

Possible to run diff GPU's on diff coins on the same rig?

That would be saaaaaaaa-weet.

I know where "gaming mode" button must be, I saw some videos about it. I don't have this button.

never had to do this, I flash my cards in any slot even connected to risers no problem after reboot

You should always BIOS flash cards in the primary 16x slot directly connected to the mobo, and should always be done individually before you try connect all the GPU's.

Help pls !!

I have 6 RX 570 gpus connected to the PC and they all are enabled and seemed to be working fine (Windows 10).. I want to save the bios of the 5th GPU, modify and flash it with ATI Flash.. When I open ATI flash, it only lists the first 3 GPUs.. No way to scroll down to the 5th.. How do i scroll down and save the bios of the 5th and flash it back? I do not want to unplug the other 5 from Mobo and do it.. It will screw up the already configured and working ones..

oops I mean.
To find gaming mode its on the bottom left after you launch into "radeon pro and firepro settings"

There is Watman, its in Gaming Mode for sure.   To find gaming mode its on the bottom left of right after you launch into "radeon pro and firepro settings".  Once your in there its under gaming/global settings.

Usually I don't change anything, just use stock clocks/settings. But for this card I will have to change some Wattman settings due to hard throttling, but I found no Wattman. I spent a few days to prepare my tools and code for Vega, but today I finally noticed it: no Wattman for Vega at all. May be because I use Windows 7 instead of Windows 10, I will check it (though it's strange anyway). Also I don't see "gaming mode" button in drivers. ADL does not work too, so I even cannot set 100% fan speed to prevent throttling. AB does not work too. Weird.

Have you messed with undervolting?