Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 801. (Read 6590565 times)

I've got some RX 560 cards. If dual mining Ethereum hashrate is about 13.5 Mh/s but sia only 90 MH/s. I don't understand why get so low sia hashrate, because Ethereum is about half of an RX 470 could but sia is only  quater of rx 470 possible hashrate.

Hello, i want to ask why after 2-3-4 hours claymore is stopping to mine on dual mode, so rig is not freezing i can get into i t with team viewer, and also i can take action but in that moment miner is not mining.
If i close that process, and open again .bat file it will start, but hashrate its smaller normally is 28 per card for ethereum and if i start it again its 140-150 mh/s. So i need to restart the rig and everything its ok. But what is the problem and how can i solve this

Switch is first, then is the router and then rigs. I tried to change ports on switch and router and the problem is every time in the same rig.

try to change port on the switch. I mean rj-45 socket

Hello I have this problem:

Running on Windows 10 fresh install.

Socket was closed remotely (by pool)

Every 60-90 minutes of mining and then the rig is getting frozen.


In the event viewer in the same time there is an error:

The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID
{D63B10C5-BB46-4990-A94F-E40B9D520160}
 and APPID
{9CA88EE3-ACB7-47C8-AFC4-AB702511C276}
 to the user NT AUTHORITY\SYSTEM SID (S-1-5-18) from address LocalHost (Using LRPC) running in the application container Unavailable SID (Unavailable). This security permission can be modified using the Component Services administrative tool.

I tried to give permission to these keys in the regedit, but it didn't helped.

Tried to set -r 60 so the miner to restart every 60 minutes, but this is not an option too.
Tried every single ethermine eu and us server, but I'm getting the same error.

I have 3 rigs and only one is getting this error.

I have switch and a routed before the rigs.

Tried to downclock cards, but they are stable in both cases and the rig is freezing. I have 1% stale shares if it's matters for stable mining...

Tried to use different IP (from the same switch).
Tried USB lan card.

Nothing worked.

I was using Claymore miner 9.2 and red that some guys installed 9.3 and the problem was gone - I installed 9.5 and for two days I didn't had the problem but it happen again.

Please help me the rig is freezing every 60-90 minutes.......

The time stamps show 10 minutes. It was also disconnected for 8 hours over night with the same effect, the 10 minutes is my manual testing.

R9 380X Sapphire Nitro mem. Elpida
Setting  https://bitcointalksearch.org/topic/custom-r9-380-bios-for-23-24mhs-1620733

There was a post from Claymore. Here it is.

"Claymore is hacked by tons of newbies. Attacked by them in PM too. Maybe I need to create another FAQ for newbies, but most of them will not read it.
Just some quick answers to recent questions:

1. If you think that the miner will mine even if you turn off the router, wait a couple of minutes more, it will stop.
2. Place all command line arguments in .BAT file in a single line. Arguments from the second line will be ignored.
3. Use latest version if you have problems with DCR or SIA.
4. I don't have any private versions with +50% speed.
5. I'm a software developer, so I think I cannot help you to build your mining rig properly or provide you with the list of necessary parts, please ask this question here on forum or search here, there are many threads related to hardware.
6. Please read Readme.txt or original post of this thread for command line samples, options description and FAQ.
7. I don't have miners for Tesla, IBM CPUs, Phi or for very old GPUs.
8. Mining on laptops is a bad idea.
9. You will not see full hashrate on pool immediately, you have to wait for 24 hours at least.
10. If miner cannot generate DAG file, check environment variables (see Readme), check if your GPU has 3GB memory at least, and check if you have enough virtual memory (pagefile). If all this does not help, try to install more physical RAM.

And sometimes I see really interesting messages. Recently I got PM from a newbie account, he found the issue with Pascal nonces from the log file. I was impressed."

Don't know what happen, but mine started mining at 2.5. An hour ago it was at 28 (Only have one rx 470)

Already have Windows 10 Creator Update.

Any ideas?

Edit: Restarted Windows, nothing. Restarted Claymore 3 times, started working again. Not sure what the problem was

Claymore 9.5 Linux does not stop mining after the network is disconnected.


https://pastebin.com/QR8Uud5v

Pulling max wattage the whole time it was disconnected.

Provide more information about your setup: makes, models, versions, parameters, screenshots, troubleshooting steps taken...

add EthMan to antivirus exceptions.

I had experienced the same with previous versions

Yes, because this thread is a mess. People who are looking for a tiny piece of valuable information have to go through piles of irrelevant trash and no wonder frustration bursts out...
I would suggest to create a separate thread for ETH GPU mining in general where general questions like DAG belong to.

Cant mine ETH with that GPU anymore. Mine ZEC with it.

I have a problem it is spitting out his..

im using a r9 270 with it and on ethpool


https://gyazo.com/86ce1a248b12c0f7f21e16010826af7b

Hmmmm, still only getting around 2.5MH/s per NVIDIA GTX 1070 card on this Windows 10 64-bit rig.

Anyone encountered and solved this issue?

I have tried different driver versions, and updated Windows to the Creators Update, but still nothing.
I seem to be getting great hash speeds on Decred and with Zcash, but ETH just not working.

I tested one of the other cards in my Win 7 64 bit machine and got a cool 27MH/s, but it is 1/10th of that on Windows 10, and I can't figure out why.

If I run dual mining, Decred runs at full speed, ETH at around 2.5MH/s.
When I turn off Decred and run ETH only, same thing... 2.5MH/s.


EDIT:
So, interestingly when I updated to the latest drivers it worked first time, getting around 25-26MH/s per card. The recommended drivers operate at around 1/10th of that.

@claymore can we add another pool txt file other than epools.txt and dpools.txt so for each coin they have their own txt file for pool list (for example dcr-pools.txt, sia-pools.txt, eth-pools.txt, lbry-pools.txt...), so when we need to change alt coin for dual mining, we just need to change -dcoin parameter on config.txt, without the need to update dpools.txt (which is used as alt-coin pools)

or another alternative is other than -dcoin param we should be able to specify -dpool-file param to point which pool.txt to use for alt-coin

just a suggestion it would be helpful tough

hello,

i dual mine dcr and eth on my amd rig everythink working fine but on my nvidia my mh's eth drop like crazy... how i can fix it?

put the new ethman in its own folder that was not in my regular miner av exclusion list (all miners go into a "_miners" folder which is excluded. so avast flagged it as "potentially suspicious". IDP.gerneric or some such.

uploaded it to virus total, says its fine (which i figured). just letting others know.

anyway heres the output.

https://www.virustotal.com/en/file/ef860802de9e1f791d7db278a20205b82099d4c020345a940c0b487ed3baaf10/analysis/1497992376/