Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 797.

jackbox

legendary

Activity: 1246

Merit: 1024

Quote from: Qazo on June 22, 2017, 08:26:27 AM

Quote from: TechPark on June 22, 2017, 06:18:00 AM

Quote from: jackbox on June 22, 2017, 06:04:44 AM

Quote from: Haidong Liang on June 22, 2017, 01:59:04 AM

Quote from: Qazo on June 22, 2017, 01:30:02 AM

Quote from: Qazo on June 21, 2017, 09:29:56 AM

Can anyone help me with problem, i'm cracking my head for more than a week now

version 9.5, dual mining UBQ/DCR
every hour when dev fee start and miner is changing to ETH pool my GPU0 hangs in openCL

already tried to switch risers, checked all GPU, everything is fine with hardware...

how i can solve this?

anyone? @claymore?

i added -nofee and it works but it's unfair to claymore... any solution to this?

-nofee is the only solution. I think your card does not have enough memory.

-nofee is not fair to you also. Your rig will hash 9 to 10% slower with this option as Claymore disables features that optimize hashing speed. You hash much slower with the -nofee option.

If you really care about Claymore you can transfer 1% of your earnings manually at the end of every week Wink

it's not that much slower, with fee on it's like 139 mh/s, and with nofee is 133-134 mh/s

so it's not that bad, but i will definitely try another mining software because I cannot solve this

That is almost a 5% reduction in hashing speed. In tests I did I got 9.5% less hashing speed with the -nofee option. When you mine other ethash coins it has to create new dags for the gpus so the devfee can mine ETH, then when it is done is to create new dags for the ethash coins you were mining.

Qazo

full member

Activity: 211

Merit: 101

Quote from: TechPark on June 22, 2017, 06:18:00 AM

Quote from: jackbox on June 22, 2017, 06:04:44 AM

Quote from: Haidong Liang on June 22, 2017, 01:59:04 AM

Quote from: Qazo on June 22, 2017, 01:30:02 AM

Quote from: Qazo on June 21, 2017, 09:29:56 AM

Can anyone help me with problem, i'm cracking my head for more than a week now

version 9.5, dual mining UBQ/DCR
every hour when dev fee start and miner is changing to ETH pool my GPU0 hangs in openCL

already tried to switch risers, checked all GPU, everything is fine with hardware...

how i can solve this?

anyone? @claymore?

i added -nofee and it works but it's unfair to claymore... any solution to this?

-nofee is the only solution. I think your card does not have enough memory.

-nofee is not fair to you also. Your rig will hash 9 to 10% slower with this option as Claymore disables features that optimize hashing speed. You hash much slower with the -nofee option.

If you really care about Claymore you can transfer 1% of your earnings manually at the end of every week Wink

it's not that much slower, with fee on it's like 139 mh/s, and with nofee is 133-134 mh/s

so it's not that bad, but i will definitely try another mining software because I cannot solve this

Vann

hero member

Activity: 1036

Merit: 606

Quote from: batmanvip on June 22, 2017, 07:40:23 AM

hi i'm new in mining and have one question:

I have ASUS Z97-PRO with gtx970 (one PSU 750W)

i plan to buy 4x RX580 and one psu 650W gold. its posible to connect to Z97-pro and mining ETH with only rx580s?, because i dont plan make new rig for mining, i need use my computer normaly with gtx970 with no freezes, Its posible?

Go with the 750W or 850W EVGA G2/P2 instead of a 650W. The cost difference between the two is less than $50. The 650W only has two VGA connectors while the 750W has four and the 850W has four 8-pin + two 6-pin pigtail cables. The PSU will also run more efficiently using less of the maximum capacity.

h2gvaka

newbie

Activity: 33

Merit: 0

Can you set Claymore to share mined ETH to two wallets and set how much percentage to send to one and how much to another?

thevictimofuktyranny

legendary

Activity: 1092

Merit: 1004

Quote from: ?? on ??

Quote from: batmanvip on June 22, 2017, 07:40:23 AM

hi i'm new in mining and have one question:

I have ASUS Z97-PRO with gtx970 (one PSU 750W)

i plan to buy 4x RX580 and one psu 650W gold. its posible to connect to Z97-pro and mining ETH with only rx580s?, because i dont plan make new rig for mining, i need use my computer normaly with gtx970 with no freezes, Its posible?

in teory yes.
in the mining program use option to specify withc gpu to use.

Do remember to factor this into hardware purchases!

I said, last year, the slowdown in rewards (slowing average block times) would start in April 2017 and it did start in April 2017.

14seconds to 14.3seconds average block time before April 8th.

Afterwards, slowed to around 14.8 seconds.

27th April slowed to around 15.2 seconds.

13th May slowed to around 15.85 seconds.

29 May slowed to over 16 seconds.

21 June slowed to over 17 seconds.

So far - there has been around 21.8% reduction of Ethereum rewards for POW.

batmanvip

newbie

Activity: 1

Merit: 0

hi i'm new in mining and have one question:

I have ASUS Z97-PRO with gtx970 (one PSU 750W)

i plan to buy 4x RX580 and one psu 650W gold. its posible to connect to Z97-pro and mining ETH with only rx580s?, because i dont plan make new rig for mining, i need use my computer normaly with gtx970 with no freezes, Its posible?

chup

sr. member

Activity: 736

Merit: 262

Me, Myself & I

Quote from: Claymore on June 22, 2017, 05:23:56 AM

Since RX460 cards become more popular, I will add ASM mode for these cards in next update along with some other improvements, it will be available in 2-4 days.

RX560?

rogeriosmorais

newbie

Activity: 26

Merit: 0

Quote from: ?? on ??

Quote from: rogeriosmorais on June 22, 2017, 06:28:50 AM

Quote from: tytanick on July 10, 2016, 03:21:56 AM

Quote from: GandalfG on July 09, 2016, 07:17:56 PM

Mining with Claymore and get full HDD (128GB SSD) in half hour.
After checking find /var/log/syslog and kern.log grown up to 52GB each.
System write this 4 messages about 4-5 thousands per second !

Code:

Jul 9 23:58:37 test-rig kernel: [ 1399.017519] VM fault (0x01, vmid 6) at page 135290427, read from 'TC3' (0x54433300) (196)
Jul 9 23:58:37 test-rig kernel: [ 1399.017554] amdgpu 0000:04:00.0: GPU fault detected: 147 0x01c84801
Jul 9 23:58:37 test-rig kernel: [ 1399.017557] amdgpu 0000:04:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x08105E39
Jul 9 23:58:37 test-rig kernel: [ 1399.017559] amdgpu 0000:04:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x0C048001

Jul 9 23:58:37 test-rig kernel: [ 1399.017561] VM fault (0x01, vmid 6) at page 135290425, read from 'TC4' (0x54433400) (72)
Jul 9 23:58:37 test-rig kernel: [ 1399.017567] amdgpu 0000:01:00.0: GPU fault detected: 147 0x01f08801
Jul 9 23:58:37 test-rig kernel: [ 1399.017569] amdgpu 0000:01:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x08105E3E
Jul 9 23:58:37 test-rig kernel: [ 1399.017570] amdgpu 0000:01:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x0C088001

Jul 9 23:58:37 test-rig kernel: [ 1399.017572] VM fault (0x01, vmid 6) at page 135290430, read from 'TC6' (0x54433600) (136)
Jul 9 23:58:37 test-rig kernel: [ 1399.017607] amdgpu 0000:04:00.0: GPU fault detected: 147 0x01e84801
Jul 9 23:58:37 test-rig kernel: [ 1399.017610] amdgpu 0000:04:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x08105E3D
Jul 9 23:58:37 test-rig kernel: [ 1399.017612] amdgpu 0000:04:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x0C048001

Despite this mine worked properly 24.3 MH/s on each card until the disk is full

Someone also stumbled upon a similar problem?

System:
Lubuntu 16.04 with amdgpu-pro_16.30.3

5x RX 480 8GB ref model
Asrock FM2A88X + BTC

Hi, i have the same problem in my new project : http://simplemining.net/
Anyway it doesnt bother mining and about logs you can turn then off:
as root execute this command and you will have no longer such problem

systemctl disable rsyslog.service
then delete big file logs from /var/log/ adn reboot system, then it will work fine.
If you want i will release my http://simplemining.net/ Operating System which will have this fix and many more + feature updates.
If you want make donation BTC: 1ERRVbvV23h51ScH73nQr6TDmaieKNuuVD

I'm running into the same problem in simpleMining OS.

1 - My pendrive is not full:

Filesystem Size Used Avail Use% Mounted on
udev 1.9G 0 1.9G 0% /dev
tmpfs 390M 35M 356M 9% /run
/dev/sda2 6.5G 2.1G 4.4G 33% /
tmpfs 2.0G 0 2.0G 0% /dev/shm
tmpfs 5.0M 0 5.0M 0% /run/lock
tmpfs 2.0G 0 2.0G 0% /sys/fs/cgroup
tmpfs 2.0G 8.0K 2.0G 1% /var/log
tmpfs 2.0G 89M 1.9G 5% /var/tmp
tmpfs 300M 16K 300M 1% /tmp
tmpfs 2.0G 0 2.0G 0% /var/log/apt
/dev/sda1 8.9M 3.5K 8.9M 1% /mnt/user
tmpfs 390M 0 390M 0% /run/user/1000

2 - Logs are disabled in claymore

3 - I've executed the sudo systemctl disable rsyslog.service command, didnt help.

4 - It only started to pop up when I plugged in the 3rd card.

5 - My hashing does not seem to be affected by it.

6 - It's a Z270-P Asus Prime MB with 4 GB RAM.

this error in Linux mean, that the gpu is faulty... not 100% any more.

No, it does not mean that, my gpus are fine.

rogeriosmorais

newbie

Activity: 26

Merit: 0

Quote from: tytanick on July 10, 2016, 03:21:56 AM

Quote from: GandalfG on July 09, 2016, 07:17:56 PM

Mining with Claymore and get full HDD (128GB SSD) in half hour.
After checking find /var/log/syslog and kern.log grown up to 52GB each.
System write this 4 messages about 4-5 thousands per second !

Code:

Jul 9 23:58:37 test-rig kernel: [ 1399.017519] VM fault (0x01, vmid 6) at page 135290427, read from 'TC3' (0x54433300) (196)
Jul 9 23:58:37 test-rig kernel: [ 1399.017554] amdgpu 0000:04:00.0: GPU fault detected: 147 0x01c84801
Jul 9 23:58:37 test-rig kernel: [ 1399.017557] amdgpu 0000:04:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x08105E39
Jul 9 23:58:37 test-rig kernel: [ 1399.017559] amdgpu 0000:04:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x0C048001

Jul 9 23:58:37 test-rig kernel: [ 1399.017561] VM fault (0x01, vmid 6) at page 135290425, read from 'TC4' (0x54433400) (72)
Jul 9 23:58:37 test-rig kernel: [ 1399.017567] amdgpu 0000:01:00.0: GPU fault detected: 147 0x01f08801
Jul 9 23:58:37 test-rig kernel: [ 1399.017569] amdgpu 0000:01:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x08105E3E
Jul 9 23:58:37 test-rig kernel: [ 1399.017570] amdgpu 0000:01:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x0C088001

Jul 9 23:58:37 test-rig kernel: [ 1399.017572] VM fault (0x01, vmid 6) at page 135290430, read from 'TC6' (0x54433600) (136)
Jul 9 23:58:37 test-rig kernel: [ 1399.017607] amdgpu 0000:04:00.0: GPU fault detected: 147 0x01e84801
Jul 9 23:58:37 test-rig kernel: [ 1399.017610] amdgpu 0000:04:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x08105E3D
Jul 9 23:58:37 test-rig kernel: [ 1399.017612] amdgpu 0000:04:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x0C048001

Despite this mine worked properly 24.3 MH/s on each card until the disk is full

Someone also stumbled upon a similar problem?

System:
Lubuntu 16.04 with amdgpu-pro_16.30.3

5x RX 480 8GB ref model
Asrock FM2A88X + BTC

Hi, i have the same problem in my new project : http://simplemining.net/
Anyway it doesnt bother mining and about logs you can turn then off:
as root execute this command and you will have no longer such problem

systemctl disable rsyslog.service
then delete big file logs from /var/log/ adn reboot system, then it will work fine.
If you want i will release my http://simplemining.net/ Operating System which will have this fix and many more + feature updates.
If you want make donation BTC: 1ERRVbvV23h51ScH73nQr6TDmaieKNuuVD

I'm running into the same problem in simpleMining OS.

1 - My pendrive is not full:

Filesystem Size Used Avail Use% Mounted on
udev 1.9G 0 1.9G 0% /dev
tmpfs 390M 35M 356M 9% /run
/dev/sda2 6.5G 2.1G 4.4G 33% /
tmpfs 2.0G 0 2.0G 0% /dev/shm
tmpfs 5.0M 0 5.0M 0% /run/lock
tmpfs 2.0G 0 2.0G 0% /sys/fs/cgroup
tmpfs 2.0G 8.0K 2.0G 1% /var/log
tmpfs 2.0G 89M 1.9G 5% /var/tmp
tmpfs 300M 16K 300M 1% /tmp
tmpfs 2.0G 0 2.0G 0% /var/log/apt
/dev/sda1 8.9M 3.5K 8.9M 1% /mnt/user
tmpfs 390M 0 390M 0% /run/user/1000

2 - Logs are disabled in claymore

3 - I've executed the sudo systemctl disable rsyslog.service command, didnt help.

4 - It only started to pop up when I plugged in the 3rd card.

5 - My hashing does not seem to be affected by it.

6 - It's a Z270-P Asus Prime MB.

TechPark

full member

Activity: 238

Merit: 100

Quote from: jackbox on June 22, 2017, 06:04:44 AM

Quote from: Haidong Liang on June 22, 2017, 01:59:04 AM

Quote from: Qazo on June 22, 2017, 01:30:02 AM

Quote from: Qazo on June 21, 2017, 09:29:56 AM

Can anyone help me with problem, i'm cracking my head for more than a week now

version 9.5, dual mining UBQ/DCR
every hour when dev fee start and miner is changing to ETH pool my GPU0 hangs in openCL

already tried to switch risers, checked all GPU, everything is fine with hardware...

how i can solve this?

anyone? @claymore?

i added -nofee and it works but it's unfair to claymore... any solution to this?

-nofee is the only solution. I think your card does not have enough memory.

-nofee is not fair to you also. Your rig will hash 9 to 10% slower with this option as Claymore disables features that optimize hashing speed. You hash much slower with the -nofee option.

If you really care about Claymore you can transfer 1% of your earnings manually at the end of every week Wink

jackbox

legendary

Activity: 1246

Merit: 1024

Quote from: Haidong Liang on June 22, 2017, 01:59:04 AM

Quote from: Qazo on June 22, 2017, 01:30:02 AM

Quote from: Qazo on June 21, 2017, 09:29:56 AM

Can anyone help me with problem, i'm cracking my head for more than a week now

version 9.5, dual mining UBQ/DCR
every hour when dev fee start and miner is changing to ETH pool my GPU0 hangs in openCL

already tried to switch risers, checked all GPU, everything is fine with hardware...

how i can solve this?

anyone? @claymore?

i added -nofee and it works but it's unfair to claymore... any solution to this?

-nofee is the only solution. I think your card does not have enough memory.

-nofee is not fair to you also. Your rig will hash 9 to 10% slower with this option as Claymore disables features that optimize hashing speed. You hash much slower with the -nofee option.

preda

sr. member

Activity: 756

Merit: 250

Quote from: Claymore on June 22, 2017, 05:23:56 AM

Since RX460 cards become more popular, I will add ASM mode for these cards in next update along with some other improvements, it will be available in 2-4 days.

What is the asm? And what about the rx460? They are profitable?

vapourminer

legendary

Activity: 4354

Merit: 3614

what is this "brake pedal" you speak of?

Quote from: sheriff_br on June 21, 2017, 11:56:54 PM

Hi peoples, I got a Radeon Sapphire Hd 7990 6gb.
I downloaded the latest driver (AMD Radeon Software Crimson Edition 17.4.3 Driver for Windows® 10 64-bit: http://www.sapphiretech.com/productdetial.asp?os=Win10_64&Pid=076248DD-C96B-46AD-976A-665D7185BDE6&tag=download&lang=eng).

I configured my ETH surety, put the data in .bat:

...
Setting DAG epoch #130 for GPU1
Setting DAG epoch #130 for GPU0
Create GPU buffer for GPU1
Create GPU buffer for GPU0
GPU0, OpenCL error -4 (0) - cannot create DAG on GPU
GPU 0 failed
GPU0, OpenCL error -4 (0) - cannot create DAG on GPU
GPU 0 failed

Note:
Windows 10, 4Gb Ram DDR3, 1Tb HD.

Virtual memory set on 40000mb.

might try 8 gb ram. but im sure ive seen people running 4 gigs no problem so not sure if that would solve it.

try 15.12 drivers for your card, you dont need the latest with older cards like that.

preda

sr. member

Activity: 756

Merit: 250

Quote from: nils8107 on June 22, 2017, 04:44:02 AM

Hi

I want to mine LBC mainly.
I have GTX1070 card 8GB.

How i can enable this? I know I have to mine de developer fee too in ETH.
Only by switching the DCRI Value?

I add +500 DCRI then LBC makes 170MH/s and ETH 14MH/S.

Any adviceplease?

Idk about +500

I use often +16
But more is the number more is the second coin hashrate. So try -dcri 50 and try to go up

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Since RX460 cards become more popular, I will add ASM mode for these cards in next update along with some other improvements, it will be available in 2-4 days.

nils8107

newbie

Activity: 22

Merit: 0

Hi

I want to mine LBC mainly.
I have GTX1070 card 8GB.

How i can enable this? I know I have to mine de developer fee too in ETH.
Only by switching the DCRI Value?

I add +500 DCRI then LBC makes 170MH/s and ETH 14MH/S.

Any adviceplease?

hcwh

newbie

Activity: 24

Merit: 0

Quote from: Gornidah on June 21, 2017, 11:35:06 AM

Hey!

Since Claymore dont have the option to OC or Control Fan's with Nvidia cards, how you guys do it in Linux (UBUNTU)?

Thanks!

I have same question. Trying to enhance performance on 1060's in Linux to get a few more MH/s. Don't have the same tools as Windows, but hoping there are shell commands or Claymore switches that can be used. Anyone able to provide some guidance or clues on this?

preda

sr. member

Activity: 756

Merit: 250

Quote from: NoOneLt on June 22, 2017, 01:33:11 AM

Quote from: preda on June 22, 2017, 01:11:59 AM

Your overclock?

+50 on every card GPU, +725..875 Memory depending on card, 95TDP.

But ETH+SIA it is fully stable. LBRY more memory intensive?

Yes lbry is more intensive

platitude

member

Activity: 103

Merit: 10

Quote from: Steve_Sanders on June 22, 2017, 02:48:14 AM

Hey guys I've been mining eth+dcr successfully for 12h now (my very first try ever), and i get 14-15 Mh/s on Eth and 145 Mh/s with Dcr with a gtx 1060 3gb.

I pointed the miner to my eth wallet and the dcr to the suprnova pool but while i receive dcr (0,0010 dcr so far) i still see no fractions of eth, is it normal?

The mining of DCR is very slow, it's normal. For ETH you can check your stats on the mining pool website also check that miner has found and accepted shares in log

Steve_Sanders

newbie

Activity: 26

Merit: 2

Hey guys I've been mining eth+dcr successfully for 12h now (my very first try ever), and i get 14-15 Mh/s on Eth and 145 Mh/s with Dcr with a gtx 1060 3gb.

I pointed the miner to my eth wallet and the dcr to the suprnova pool but while i receive dcr (0,0010 dcr so far) i still see no fractions of eth, is it normal?

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 797. (Read 6590718 times)